Hello!
I recently got a Note 2 (GT-N7105)
And for some silly reason wich even disappoints myself i wanted to overclock , well that didn't make sense i know but however i did it! and directly after i installed the required file (I don't remember wich one but it was for 1.8Ghz) after the installing my phone kept showing the boot logo , i tried to use my backup but even after restoring it didnt boot! I cleaned everything wich also cleaned my backup...
I been on it for about 7 hours now trying different roms , kernels , and every file i could find but nothing helps.
I now installed Cyanogenmod using CMW but even that bootloops.
The last thing i could notice is CMW showing me a E: failed to Mount /efs (Invalid argument) Wich makes me worry even more...
I honestly hope there are some good peaple who could help me with this... Finally got a great phone and by stupid mistakes i made it won't work anymore..
I don't care what rom gets on it , Even if its a hello kitty rom u won't hear me complain , If the phone works again i'll be happy!
Not sure if this helps but its a GT-N7105 , i know it had the newest android there was (4. something, i think it was 4.3)
Odin does see the device , My CMW (6.0.4.1) works and Download Mode works.
I hope anybody can help me!
In case you want to help me live wich would be awesome my skype is : chrishendriks92
If it gets fixed i will Offcourse place the solution here.
(The note is not a new one , its used and a few months old , worked 100% before my stupid decisions bricked it)
(so here's a small version)
-Every rom i tried will bootloop , It shows a different boot video/logo everytime tho
-It all happened after i tried a 2.8Ghz Overclock
-i get a EFS error in CMW
-Accidentily i deleted my backup but i don't mind whatever rom gets on it
-Download mode and CMW (6.0.4.1) works
dodemans said:
Hello!
I recently got a Note 2 (GT-N7105)
And for some silly reason wich even disappoints myself i wanted to overclock , well that didn't make sense i know but however i did it! and directly after i installed the required file (I don't remember wich one but it was for 1.8Ghz) after the installing my phone kept showing the boot logo , i tried to use my backup but even after restoring it didnt boot! I cleaned everything wich also cleaned my backup...
I been on it for about 7 hours now trying different roms , kernels , and every file i could find but nothing helps.
I now installed Cyanogenmod using CMW but even that bootloops.
The last thing i could notice is CMW showing me a E: failed to Mount /efs (Invalid argument) Wich makes me worry even more...
I honestly hope there are some good peaple who could help me with this... Finally got a great phone and by stupid mistakes i made it won't work anymore..
I don't care what rom gets on it , Even if its a hello kitty rom u won't hear me complain , If the phone works again i'll be happy!
Not sure if this helps but its a GT-N7105 , i know it had the newest android there was (4. something, i think it was 4.3)
Odin does see the device , My CMW (6.0.4.1) works and Download Mode works.
I hope anybody can help me!
In case you want to help me live wich would be awesome my skype is : chrishendriks92
If it gets fixed i will Offcourse place the solution here.
(The note is not a new one , its used and a few months old , worked 100% before my stupid decisions bricked it)
(so here's a small version)
-Every rom i tried will bootloop , It shows a different boot video/logo everytime tho
-It all happened after i tried a 2.8Ghz Overclock
-i get a EFS error in CMW
-Accidentily i deleted my backup but i don't mind whatever rom gets on it
-Download mode and CMW (6.0.4.1) works
Click to expand...
Click to collapse
Ok, so what I would do.
I would wipe data through CWM.
Download official ROM from sammobile.com and flash it through Odin.
I hope this will help to get the phone booted.
After that we will worry about imei recovery.
dzejju said:
Ok, so what I would do.
I would wipe data through CWM.
Download official ROM from ... and flash it through Odin.
I hope this will help to get the phone booted.
After that we will worry about imei recovery.
Click to expand...
Click to collapse
Thank you for your reply:good:
I'm downloading it , looks like its going to take a while so i'll let you know!
Try mskips toolkit from skipsoft.net. It has a recovery package that should do the trick. There is a thread on it on here but i think it's closed due to Microsoft signature issues
Sent from my GT-N7105 using XDA Premium 4 mobile app
I'm afraid downloading/Flashing the rom didnt work.
ill get the T-Mobile screen , and then the samsung logo where it gets stuck , the install was completed tho so no errors whatsoever
This is a picture link s30.postimg.org/8l0bgrxa8/image.jpg
Would be amazing if you could help me out with this because i can't choose ''Option 2'' right picture , it just won't take it.
I can install teamviewer or whatever programm you want
I have the same problem, I'm on 4.3 version and tried to downgrade to 4.1.1 and went back to 4.3, I formatted the system through twrp with NO OS INSTALLED to be sure it is totally cleaned but all the way, I still experiencing reboot issue.
At first I encountered unfortunately systemui has stopped, done rooting and fixing permission but still no luck.
One more thing, I already flashed pit file.
.
(Update , I tried anything i could but it didnt work out , its going to Samsung Support)
cz4r3n said:
I have the same problem, I'm on 4.3 version and tried to downgrade to 4.1.1 and went back to 4.3, I formatted the system through twrp with NO OS INSTALLED to be sure it is totally cleaned but all the way, I still experiencing reboot issue.
At first I encountered unfortunately systemui has stopped, done rooting and fixing permission but still no luck.
One more thing, I already flashed pit file.
Click to expand...
Click to collapse
Flash right bootloader, then install fresh rom. Should be good to go.
Mufrad said:
Flash right bootloader, then install fresh rom. Should be good to go.
Click to expand...
Click to collapse
the problem persist.I flashed different bootloader already
cz4r3n said:
the problem persist.I flashed different bootloader already
Click to expand...
Click to collapse
You installed a kernel right? To over clock? First flash new bootloader, then flash stock kernel, then again flash stock rom, do not let the device boot up before you have done all three.
--------------------------------------------
_________________________
Mufrad said:
You installed a kernel right? To over clock? First flash new bootloader, then flash stock kernel, then again flash stock rom, do not let the device boot up before you have done all three.
Click to expand...
Click to collapse
I tried Agni pure kernel and followed your instructions but no avail,I think there is problem with the board,because when I wipe, the SuperSu also erased.
cz4r3n said:
I tried Agni pure kernel and followed your instructions but no avail,I think there is problem with the board,because when I wipe, the SuperSu also erased.
Click to expand...
Click to collapse
I said to install stock kernel not custom kernel, and after wipe when you install stock rom you will loose root and also loose all data and apps from previous rom anyway.
Mufrad said:
I said to install stock kernel not custom kernel, and after wipe when you install stock rom you will loose root and also loose all data and apps from previous rom anyway.
Click to expand...
Click to collapse
yup I already did that,I flashed stock kernel from http://opensource.samsung.com/.I know reflashing stock rom will delete everything including root.
What I mean is when Im rooted and tried to wipe the phone, SuperSu also deleted.Im wondering that I have a corrupted emmc, It seems that it is not mounted correctly, although I tried to flash a pit file already.
cz4r3n said:
yup I already did that,I flashed stock kernel from http://opensource.samsung.com/.I know reflashing stock rom will delete everything including root.
What I mean is when Im rooted and tried to wipe the phone, SuperSu also deleted.Im wondering that I have a corrupted emmc, It seems that it is not mounted correctly, although I tried to flash a pit file already.
Click to expand...
Click to collapse
What method did you use to root and inject supersu?
Mufrad said:
What method did you use to root and inject supersu?
Click to expand...
Click to collapse
The so called SAFEROOT
And I even tried the CF ROOT by Chainfire
butmena said:
--------------------------------------------
_________________________
Click to expand...
Click to collapse
? What!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Related
i didnt see anyone having this problem but got my gn and unlocked it yest, i came fr evo3d and we used to wiping everything n cache n dalvik so i tried to flash my first rom and im getting error " error in /sdcard/toro_aokp_b8.zip(status7) installation aborted assert failed:getprop(ro.product.device==toroII
i thought it was that rom but i tried flashing another rom and getting same message , if someone can help i appreciate it, i came fr the evo3d left sprint after 11yrs and woow what a difference in network, awesome network but im spoiled with rooting my ogevo n evo3d lol i love this phone hope i can fix this issue
Could you let us know what roms you've tried and the exact process you used please. Also are you using CWM?
RTContent said:
Could you let us know what roms you've tried and the exact process you used please. Also are you using CWM?
Click to expand...
Click to collapse
k first rom i tried AOSP 4.0.3ANDROID OPEN KANG PROJECT-TORO BUILD8 so i wiped data factory reset and cache n dalvik and flashed the rom, it looks like it starts to flash but aborts with the message above, then i restored my nan backup rebooted and went back to cwm to reflash the second time around i only wipe data factory reset cuz thats what the op says to do on his thread so i only wipe data factory n flash the rom still same error, so i went to try another rom GUMMYNEX 0.2.3 and i did the same process with both im following the steps their stating in the op in have cwm
From what the error sounds like is that it doesn't think you have the correct device. You have a CDMA phone and not a GSM?
RTContent said:
From what the error sounds like is that it doesn't think you have the correct device. You have a CDMA phone and not a GSM?
Click to expand...
Click to collapse
ui
yup, i got it fr verizon cdma, im starting to stress man, ive been so used the rooting world n having custom roms i dont know how i could do without it lol, i hope i can get this issue resolve
Flip35 said:
ui
yup, i got it fr verizon cdma, im starting to stress man, ive been so used the rooting world n having custom roms i dont know how i could do without it lol, i hope i can get this issue resolve
Click to expand...
Click to collapse
sure you are using the lastest CWM???
sure you are rooted??
did you try downloading the files from another puter??
i think i might know what the problem is my cwm says 5.5.0.2 and im looking here at somebody posted in the development section for a cdma cwm and it says 5.5.0.4 could that be the problem? if so how do i redo my recovery, follow the same steps i did my first one, i downloaded and extracted the files to my c drive and opened cmd and typed the commands, can i do that again while having already cwm to flash the new cwm on top of the old one? if thats the problem
Download rom manager. Then you can flash it while your booted in android.
RTContent said:
Download rom manager. Then you can flash it while your booted in android.
Click to expand...
Click to collapse
how ive never flashed cwm using rom manager, u meand download the file of cwm5.5.0.4 putting in the root like i do any rom and go into rom manager and install?
No just download the app Rom Manager. It will download the latest version and flash it with a single click within this app!
RTContent said:
Download rom manager. Then you can flash it while your booted in android.
Click to expand...
Click to collapse
wooooord, aight RTcontent good looking out, i guess when u said it looks like it sound it was reading my phone wrong was right, i had a gms cwm, thanx man used rom manager and since i put the new cwm in my root of sdcard when i press install cwm it automatically update it without even booting into recovery but just finished intalling a rom and IT WORKED!!!! UR DA MAN im excited thanx
I recently learned to flash,
So I used TWRPV to flash coz i cant access the recovery mode becoz of rooting.
1.Flashed Slim Bean. Worked perfectly.
2.Try to flash jellybam. Got flashin failed.
3. Reflshed Slim Bean.
4. Tried to flash Miui rom. Again got error, after googling i found that i have to delete two lines from the script in miui rom with note++
I did that but not worked, then i myself checked the slimbean script, and deleted some more lines from miui script and flashed, still not worked.
5. I did same to jellybam. Then one of jellybam rom worked.
6. Now after reboot some times note 2 switch off itself when in pocket or in table. Or sometime while charging with big battery on screen with stuck tiny round circle. I have to remove the battery to switch on.
and i can't turn on bluetooth also USB not working. In pc device manager when i connect phone to pc via usb it shows CDC COMMUNICATION INTERFACE (7 times), and Com neon Suspend (1 Times)
7. Now using slimbean but problem is still there.
Any idea what happened to my n7100, is my phones efs corrupted, or soft/hard bricked,
I don't have any backups.
Can anybody please help me. I posted it here coz I can't find the same problem anywhere. There arevsimilars but they are different.
And bad English coz I'm Apatani.
Sorry for that.
My note 3 was SICK from some times (from 7 Months)
Some said it was EFS corruption. my problem was occurred because I flashed my N7100 with MIUI rom built for Galaxy S3.
My Bluetooth was not turning ON (Blank in bluetooth adress), Usb not workin with PC, turning of or Freeze while phone sleeps or auto lock.
Tried many things Flashed different Modem or Kernels, Flashed all of the custom roms available for N7100, Flashed Stock from SamMobile site.
and Lost hope... then I continued my daily life with my N7100 (using Red EYE sleep disabler)
But now today I already using Ditto Note 3 v.3.0 (Used v.1.0,v.2.0,)
today Flashed Ditto Note 3 v.3.1.1 with aroma
Selected everything in Aroma Inataller (Including Updated Modem)
then in First Boot my N7100 Freezed while i was entering my Wifi Pin First Device Setup
Waithed for more then 1/2 hour but still Freezed...
then i rebooted it with removing my N7100 Batteries
then again Boot and it Widened my eyes, my mouth was open, and i was Smilin...
My N7100 Bluetooth was turning ON, my USB is connecting to PC without any secret code for UART mode, my Phablets screen turned off, I waited for around half Hour and then i Pushed my Home Button and it respond and turned on the Screen.
Firstly your very brave to do this or your too Rich to afford a new device if you brick it .
Now firstly Please dont make any changes to the existing Rom that you have downloaded seeing other Rom scripts ,
Now before flashing any rom go trough the OP to understand what OP has mentioned about flashing.
Dont Refer to Google refer to ROM OP OR THREAD any question you have post it there so you will get quick response.
aukhahaven said:
Firstly your very brave to do this or your too Rich to afford a new device if you brick it .
Now firstly Please dont make any changes to the existing Rom that you have downloaded seeing other Rom scripts ,
Now before flashing any rom go trough the OP to understand what OP has mentioned about flashing.
Dont Refer to Google refer to ROM OP OR THREAD any question you have post it there so you will get quick response.
Click to expand...
Click to collapse
Thanks...
But I'm confused, what should I do now...
And I don't have that much money to afford another device like this one...
Is there any fix or solution for this problem...
bullooka said:
Thanks...
But I'm confused, what should I do now...
And I don't have that much money to afford another device like this one...
Is there any fix or solution for this problem...
Click to expand...
Click to collapse
Well since your phn is acting weird better flash stock rom via odin and see if the prob persist if all is fine then gv a fresh start flashing recovery and stuff and use philz recovery for flashing if it acts weird than just make the flash counter 0 and take it to service center for precise details go though ketan thread
bullooka said:
Thanks...
But I'm confused, what should I do now...
And I don't have that much money to afford another device like this one...
Is there any fix or solution for this problem...
Click to expand...
Click to collapse
Download Stock ROM,
Flash it it Via Mobile Odin or PC ondin,
Once flash completes Boot into recovery and do a Factory Reset+User data ,this will wipe everything on your device memory .
and then tell which rom you want to flash ill guide on how to do it.
aukhan said:
Download Stock ROM,
Flash it it Via Mobile Odin or PC ondin,
Once flash completes Boot into recovery and do a Factory Reset+User data ,this will wipe everything on your device memory .
and then tell which rom you want to flash ill guide on how to do it.
Click to expand...
Click to collapse
Okay.
I'll inform u when i'am ready...
In my place broadband or network is not that good, to download stock ROM it will take some time.
And thanks for helping me.
bullooka said:
Okay.
I'll inform u when i'am ready...
In my place broadband or network is not that good, to download stock ROM it will take some time.
And thanks for helping me.
Click to expand...
Click to collapse
no problem any time
aukhan said:
no problem any t
Click to expand...
Click to collapse
Actually, I think I found out what exactly happened to my note 2.
The ROM I tried to flash was for s3 (MIUIv5 I9300 Note 2 Edition 3.6.21 by @muchopoli83)
This ROM was flashed after removing the two lines from updater script, the assert lines.
But after flashing my phone didn't started so I changed the ROM.
So, what should I do. Is stock ROM still important.
If yes can u please give me the link.
I found one with pit file in xda but that link is not working
And some guys with similar problems are talking that every stock ROMs are not working for problems like this.
bullooka said:
Actually, I think I found out what exactly happened to my note 2.
The ROM I tried to flash was for s3 (MIUIv5 I9300 Note 2 Edition 3.6.21 by @muchopoli83)
This ROM was flashed after removing the two lines from updater script, the assert lines.
But after flashing my phone didn't started so I changed the ROM.
So, what should I do. Is stock ROM still important.
If yes can u please give me the link.
I found one with pit file in xda but that link is not working
And some guys with similar problems are talking that every stock ROMs are not working for problems like this.
Click to expand...
Click to collapse
You could be in serious trouble since youve flashed s3 Rom just keep your fingers crossed thinking that its not corrupted your EFS folder
what Model is your device N7100 or n7105 which 1 >?
aukhan said:
You could be in serious trouble since youve flashed s3 Rom just keep your fingers crossed thinking that its not corrupted your EFS folder
what Model is your device N7100 or n7105 which 1 >?
Click to expand...
Click to collapse
My device model is N7100,
and today I found out that my Bluetooth is also not working, I can't switch it on.
shhbz said:
Well since your phn is acting weird better flash stock rom via odin and see if the prob persist if all is fine then gv a fresh start flashing recovery and stuff and use philz recovery for flashing if it acts weird than just make the flash counter 0 and take it to service center for precise details go though ketan thread
Click to expand...
Click to collapse
Actually I accidentally flashed the wrong ROM . S3 I9300 ROM in my Note 2 N7100.
Is there any other ways to fix this
aukhan said:
You could be in serious trouble since youve flashed s3 Rom just keep your fingers crossed thinking that its not corrupted your EFS folder
what Model is your device N7100 or n7105 which 1 >?
Click to expand...
Click to collapse
My model is N7100.
Can you tell me what happened to my note2, efs damage or soft/hard bricked
And what should I do.
Please tell me.:crying:
Still got the problem
Still got the problem and cant find any solution
anybody any idea
Simply go to recovery wipe everything including format_system,
then choose any rom from N7100 development thread as your suitability .
and flash in recovery as per instructions given in OP
Then tell here what happened
looks like efs croupt no worries just flash stock rom from odin then root it with cf-root method
use triangle away to remove the flash counter and then reboot unroot from su app and ur good to go to service center
just tell them i updated this phone to latest from ota and it failed iam when it restarted there was no cellular
bullooka said:
Still got the problem and cant find any solution
anybody any idea
Click to expand...
Click to collapse
Do you have GSM network?
Flash Stock ROM via PC Odin v3.09 and use re-partition and Nand erase all with PIT file, Freset Autoreboot.
After flash complete everything must be ok.
I had the same problem few weeks ago. I also tried to flash alot of ROMs but same problem exist. found a solution to this problem yesterday this is what I did
1. Download leaked 4.3 it will take time because the file is 1.2gb
http://forum.xda-developers.com/showthread.php?t=2499794
2. After download flash it via Odin in pda. Make sure auto reboot and f.Reset time only have check.
3. If the flash fails, it's ok but make sure it already flashed the radio and modem.
4. Reboot again in download mode then flash Philz recovery
5. Reboot in recovery mode then flash slimbean rom or any rom you prefer.
6. Install gapps
7. Wipe cache and dalvik
8. Reboot and your ok now
I'm in slimrom build 2 now. Bluetooth is ok and no more reboot when phone sleeps after few seconds.
Hope this helps.
Sent from my GT-N7100 using xda app-developers app
taticuio said:
Do you have GSM network?
Flash Stock ROM via PC Odin v3.09 and use re-partition and Nand erase all with PIT file, Freset Autoreboot.
After flash complete everything must be ok.
Click to expand...
Click to collapse
Got the GSM, WIFI is also OK but bluetooth,USB and reboot on sleep. but what re-partition and Nand erase work for and what is PIT file and where should i get it
any help
Still got the problem
Ok i'll try the leaked version and thanks for reply
bullooka said:
Got the GSM, WIFI is also OK but bluetooth,USB and reboot on sleep. but what re-partition and Nand erase work for and what is PIT file and where should i get it
any help
Click to expand...
Click to collapse
Never try to touch or else you'll get a big problem.
Sent from my GT-N7100 using xda app-developers app
Hello,
I can not flash any ROM to my GT-P5210 Tab anymore.
I was on BinDroid ONE P5210 LITE V3.0.0, but since it is discontinued
and 2 other ROMs rolled out over the past days I wanted to give it a try.
- went back to stock with official firmware from "sammobile" for my device,
- flashed TWRP with Odin 3.07
- flashed ROOT with Odin
- went to recovery did factory reset + dalvik/cache (
- flashed new ROM (neither ROM Pimpdroid or Grievous is working)
after flashing Tab goes into a bootloop to recovery. First boot after flash takes some time in the Galaxy Tab3 Logo but in the end it reboots into TWRP. I have tried CWM too with the same results.
I am not totaly new to flashing, did it with my I9000 and now with my I9300 int. but with this Tab3 now I am lost.
Any ideas are much appreciated.
regards and sorry for my english its not my native tongue
zerodv8 said:
Hello,
I can not flash any ROM to my GT-P5210 Tab anymore.
I was on BinDroid ONE P5210 LITE V3.0.0, but since it is discontinued
and 2 other ROMs rolled out over the past days I wanted to give it a try.
- went back to stock with official firmware from "sammobile" for my device,
- flashed TWRP with Odin 3.07
- flashed ROOT with Odin
- went to recovery did factory reset + dalvik/cache (
- flashed new ROM (neither ROM Pimpdroid or Grievous is working)
after flashing Tab goes into a bootloop to recovery. First boot after flash takes some time in the Galaxy Tab3 Logo but in the end it reboots into TWRP. I have tried CWM too with the same results.
I am not totaly new to flashing, did it with my I9000 and now with my I9300 int. but with this Tab3 now I am lost.
Any ideas are much appreciated.
regards and sorry for my english its not my native tongue
Click to expand...
Click to collapse
did u try root check app to c if u r truly rooted? is ur su updated? if so try reflashing the recovery...n the root file. do u have the stock kernel?
THink I Got a fix
This worked for me. The TWRP does NOT actually wipe anything. go to settings in whatever rom you are running, and do a factory data reset from there. Let it wipe all app data and EVERYTHING. Then go through the steps to install whichever ROM you want. It worked for me!! Post back and let me know if it worked for you too. I tried for 3 days to install anything, and this is the only thing that worked.:victory:
Tquarter said:
This worked for me. The TWRP does NOT actually wipe anything. go to settings in whatever rom you are running, and do a factory data reset from there. Let it wipe all app data and EVERYTHING. Then go through the steps to install whichever ROM you want. It worked for me!! Post back and let me know if it worked for you too. I tried for 3 days to install anything, and this is the only thing that worked.:victory:
Click to expand...
Click to collapse
ok did read your post before trying to flash. i lost my back up and as well as my emmc. so i need a stock firmware only problem I now have is downloading one. Three quarter of links r dead and the three i have tried have had errors. Can you help me anyone with a google drive or box download of an unknown region stock firmware so I can breathe light in t o my brick please
https://db.tt/63atdfRZ Here ya go!
I'm uploading a stock firmware that can be flashed using ODEN. I have not tried this file, I just downloaded it, before I flashed anything, in case something went wrong. I'll post the link when it finishes uploading. Good luck! Post back and let us know how it went.
solved
Tquarter said:
This worked for me. The TWRP does NOT actually wipe anything. go to settings in whatever rom you are running, and do a factory data reset from there. Let it wipe all app data and EVERYTHING. Then go through the steps to install whichever ROM you want. It worked for me!! Post back and let me know if it worked for you too. I tried for 3 days to install anything, and this is the only thing that worked.:victory:
Click to expand...
Click to collapse
I tried your method and it worked. Another thing that works is first thing when you enter TWRP check if system is mounted, if not tick mount and then wipe the way installation of the rom suggests. This worked for me too. Thanks for ur time and the fish
Oh cool, I'm glad to help. I also tried to manually mount system, but untill I got that first ROM installed, it just un-mounted itself again. I hope these problems will be sorted out. Both recoveries act choked down somehow. (TERP, CWM) Looks like "source manifest CM 10.2 "thread is making exciting progress. I can't stop watching it. Most of it is over my head, but google helps me, in trying to grasp what they are saying.
Tquarter said:
Oh cool, I'm glad to help. I also tried to manually mount system, but untill I got that first ROM installed, it just un-mounted itself again. I hope these problems will be sorted out. Both recoveries act choked down somehow. (TERP, CWM) Looks like "source manifest CM 10.2 "thread is making exciting progress. I can't stop watching it. Most of it is over my head, but google helps me, in trying to grasp what they are saying.
Click to expand...
Click to collapse
can someone recommend a clean rom for gt-p5210
Hello. I tried to root my Samsung Galaxy Tab 3 - T210 and i think i really screwed it up. I did not make any backup, that was mistake NR one.
I got clock work mode up and running but i cant install any ROM, have tried The original Firmware, RocketTab, Cyanogenmod and cant pass the installation process and i think i cant turn back cause i got no backup and no way to install it again.
When i run any of these ROMs i get this error :
format() expects 4 args, got 5
Click to expand...
Click to collapse
No matter what i do, im a a bit scared know cause i think i am really close on destroying the tablet.
Can any one help me ? give me tips ?
CWM that i am running is : T210_CWM.6.0.4.7.recovery that i downloaded frome the XDA forum.
A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m
1
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.
Ah, of course.
Audriuss95 said:
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.
Click to expand...
Click to collapse
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m
1
moonbutt74 said:
A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m
Click to expand...
Click to collapse
moonbutt74 said:
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m
Click to expand...
Click to collapse
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.
Audriuss95 said:
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.
Click to expand...
Click to collapse
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk
Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/philz_touch_6.44.9-lt02wifi.zip
in general find a recovery that works for you and stick with it until an update is actually called for.
m
If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".
1
gr8nole said:
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk
Click to expand...
Click to collapse
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
moonbutt74 said:
Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one
in general find a recovery that works for you and stick with it until an update is actually called for.
m
Click to expand...
Click to collapse
Thank you for the answear. gone try a little bit more with the recovery i already have and update it like gr8nole said. Maybe that could be my big problem.
ikeny said:
If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".
Click to expand...
Click to collapse
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.
Audriuss95 said:
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.
Click to expand...
Click to collapse
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.
Audriuss95 said:
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
Click to expand...
Click to collapse
6.0.4.9 is the latest.
http://www.androidfilehost.com/?w=files&flid=12949
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.
1
ikeny said:
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.
Click to expand...
Click to collapse
I downloaded the FirmWare from SamMobile still get an error. the one that a wrote above.
gr8nole said:
6.0.4.9 is the latest.
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.
Click to expand...
Click to collapse
Ok i am going to try out that file.
I use that flashable file like i would install ROM ? right but it on SD card and not use ODIN or ?
1
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?
hey
Audriuss95 said:
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?
Click to expand...
Click to collapse
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:
If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.
1
moonbutt74 said:
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:
Click to expand...
Click to collapse
So i should put the CM mod aside ?
piercejpierce said:
If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.
Click to expand...
Click to collapse
Nono it is okey to say something like this, but the thing is i like to learn this stuff, took me about 3 days to learn how to flash a BIOS on a computer but when i got the hang of it i learned it.
I am scared of destroying the tablet but how else would i learn ? cause reading does not always help But i got it back up again. And i knew when to ask for help.
But the RocketTab looks to work well at least for know, but would love CM mod couse i have it on my S4 and when and with the RocketTab i only get android version 4.1.2
1
Thank you for the fast help, the tablet is up and running, gone skip for know trying to use CM mod.
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Reflash in Odin.
Make sure you have the correct stock rom. If you flash the "md5" you may have flashed the wrong thing. The md5 is not tge firmware, that is just the code that verifies your firmware file is not corrupted.
If your old apps were still there, you flashed the wrong thing. There is no way to flash stock firmware in odin and not wipe the data partition.
You are correct then
Yeah, I flashed a tar.md5 in Odin. It gave me a new ROM but all my apps are there. After all that, I still can't go to recovery. I tried using the terminal and ROM Toolbox to go there, both didn't work. Can I just leave it as it is and find a way to recovery or is the only way to go to bootloader and flash a correct file to get to recovery?
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
serio22 said:
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
Click to expand...
Click to collapse
It depends on what you ate flashing.
If you are flashing a full stock factory image it will wipe user data. If you are just flashing a system partition it won't.
Essem G said:
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Click to expand...
Click to collapse
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
g7755725 said:
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
Click to expand...
Click to collapse
Also this. This gives you more control over the whole process
Skipjacks said:
Also this. This gives you more control over the whole process
Click to expand...
Click to collapse
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Essem G said:
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Click to expand...
Click to collapse
The first post of any customized stock rom will tell you if its deodexed. If it doesn't say it...its not.
@Essem G:
Any updates for us? I'm following this thread because I have similar problems with my WiFi not working after upgrading from 4.2.2.
Any luck getting TWRP flashed?
Also I believe that the stock firmwares do come as tar.md5's, as in the file: M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5 from ShinySide's stock firmware thread.
As for the WiFi issue, from the hours of reading I've done it looks like this problem occurs when you upgrade your firmware, but it no longer matches the bootloader. Such as bootloader (Baseband) showing MDL, but Build Number showing NH7, NK2, etc. What does your show?
This thread may be of use to you when you get back to a working ROM. Good luck!
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Essem G said:
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Click to expand...
Click to collapse
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
g7755725 said:
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
Click to expand...
Click to collapse
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks
Essem G said:
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks[/Q] it should
Click to expand...
Click to collapse
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Essem G said:
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Click to expand...
Click to collapse
Have you tried my gamerrom Ultimate 1 its basically stock touchwiz of if Official NK2 M919UVUFNK2 with stweaks and no bloatware here is the thread gru 1 is in.the botyom of the thread http://forum.xda-developers.com/galaxy-s4-tmobile/development/stock-os-gamerrom-ultimate-2-touchwiz-t3078467
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Essem G said:
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Click to expand...
Click to collapse
If you're trying to go back to complete stock then just Odin NK2 firmware. http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508 I used the NK2 from here about 2 days ago to go back to stock.