Hey, new to the mod scene. I got a HTC M8 recently with that's rooted, unlocked bootloader and S-On.
Currently running Elix-R 1.21, a GPE ROM. Was browsing some other custom ROMs and some recommend a firmware upgrade.
My question is, how do I check what firmware I have, and can I upgrade my firmware if I recover back to stock and use OTA ? I tried googling the answer, checking the FAQ thread here and searched for a few pages with the keyword firmware but couldn't find the answer. (I have found the thread on how to flash firmware though)
History:
- Had stock for a while, updated through OTA around...August? I think? I can't remember which update
Artelier said:
Hey, new to the mod scene. I got a HTC M8 recently with that's rooted, unlocked bootloader and S-On.
Currently running Elix-R 1.21, a GPE ROM. Was browsing some other custom ROMs and some recommend a firmware upgrade.
My question is, how do I check what firmware I have, and can I upgrade my firmware if I recover back to stock and use OTA ? I tried googling the answer, checking the FAQ thread here and searched for a few pages with the keyword firmware but couldn't find the answer. (I have found the thread on how to flash firmware though)
History:
- Had stock for a while, updated through OTA around...August? I think? I can't remember which update
Click to expand...
Click to collapse
Check the below thread, has step by step guide on how to check firmware version in fastboot. There are other threads/guides on how to return to stock to update firmware, just have to search.
http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Thanks! I tried that but I think because I'm on a modified ROM, it doesn't actually show my firmware where it's supposed to be.
However, if that's the only way, then when I think I need to upgrade my firmware I'll flash stock and check it first.
Boot into fastboot. It's somewhere on the text if i'm not mistaken
Artelier said:
Thanks! I tried that but I think because I'm on a modified ROM, it doesn't actually show my firmware where it's supposed to be.
Click to expand...
Click to collapse
Firmware doesn't really have a "number". We often refer to the software OS version (1.x, 2.x) the firmware deployed with for lack of anything better to go by. By checking main or software number, its just telling you the version of the ROM. You need to look at the hboot and radio baseband numbers.
If you are on hboot 3.18 and baseband 1.19x, you are on the 2.x base firmware. If those numbers are lower, you are on 1.x firmware.
Also be aware that Android 4.4.4 (software 3.x) is starting to roll out now. So you may want to return to stock ROM and recovery to get this OTA and the absolute newest firmware, anyway.
Hi all.
Two weeks ago I got this device (sgh i747) was rooted and was stock 4.1.1. I installed cwm and made A backup of stock room. And flash AOKP custom kitkat rom. Now I want to downgrade back to stock. or if I cannot downgrade please suggest me a stable lollypop rom.
Things I have!
1:- rooted cwm installed (sgh i747)
Backup of stock rom 4.1.1
Please help .
Thanks
mango man said:
Hi all.
Two weeks ago I got this device (sgh i747) was rooted and was stock 4.1.1. I installed cwm and made A backup of stock room. And flash AOKP custom kitkat rom. Now I want to downgrade back to stock. or if I cannot downgrade please suggest me a stable lollypop rom.
Things I have!
1:- rooted cwm installed (sgh i747)
Backup of stock rom 4.1.1
Please help .
Thanks
Click to expand...
Click to collapse
If you are still on the original bootloader and modem you should be able to revert to stock 4.1.1 by simply restoring the backup from your recovery. Before you attempt to do so verify that you are indeed on the 4.1.1 bootloader. This can be done with the Phone Info *Samsung* app by VndNguyen (?sp) from the playstore or by a couple of terminal emulator commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
If you do not already have terminal emulator installed, it may have come with the ROM, you can get it from the Playstore. It may also be a part of CWM recovery, it is part of TWRP I know for sure.
If it turns out you are on a newer bootloader and modem then go with a stock ROM that matches the bootloader and modem on the phone. To run a lollypop rom you will need to be on at least the NE4 bootloader and modem.
Thanks for a very helpful reply. I m going to follow your instructions. Will soon replay. Thanks again.
dawgdoc said:
If you are still on the original bootloader and modem you should be able to revert to stock 4.1.1 by simply restoring the backup from your recovery. Before you attempt to do so verify that you are indeed on the 4.1.1 bootloader. This can be done with the Phone Info *Samsung* app by VndNguyen (?sp) from the playstore or by a couple of terminal emulator commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
If you do not already have terminal emulator installed, it may have come with the ROM, you can get it from the Playstore. It may also be a part of CWM recovery, it is part of TWRP I know for sure.
If it turns out you are on a newer bootloader and modem then go with a stock ROM that matches the bootloader and modem on the phone. To run a lollypop rom you will need to be on at least the NE4 bootloader and modem.
Click to expand...
Click to collapse
Okay got Samsung phone info app.
Boot loader version -------I747UCDLK3
Baseband version -----I747UCDLK3
And please explain LATEST NE4 BOOT LOADER.
Thanks
You are currently running the LK3 bootloader and modem. If I am not mistaken that's a pretty old one (original?). You will have to update to NE4 or newer firmware before you can flash any of the newer roms. They will not boot in the older ones.
Your firmware is actually the only one available for download so I recommend flashing it via Odin and factory resetting. Then update using the Software Update option in Settings > About Device.
You can download your LK3 firmware here: http://www.sammobile.com/firmwares/database/SGH-I747/
You may have to run Software update several times to fully update.
That is probably the safest and easiest course you can take.
After that, flash the latest custom recovery of your choice, then flash the rom you want.
Sent from my SGH-T999 using Tapatalk
---------- Post added at 12:17 PM ---------- Previous post was at 12:13 PM ----------
BTW, after flashing the LK3 firmware, you might want to consider using the free Sim unlock method. (Should be pretty easy to find).
Once you update past 4.3 you can no longer use it. It will allow the device to be used on other carriers networks, which can be beneficial if you ever want to sell it or switch carriers.
Sent from my SGH-T999 using Tapatalk
What DocHoliday77 suggests is probably the safest method to get what you want. After each update the system will force you to wait 24 hours before you can make the next update. That would be three days to get to NE4, the first 4.4.2 release by AT&T, which you need to run lollipop ROMs. If you want to update to the current release (NJ2) that would be two additional days.
You can shortcut the required waiting period by manually advancing the system date after each update.
In addition to not allowing you to use the free unlock, once you take the 4.3 bootloader it prevents you from downgrading bootloaders. Newer bootloaders do the same, downgrading will be a thing of the past. (I never took the official 4.3 bootloader until the stagefright scare came along and I went from my older custom ROM to a new release.)
dawgdoc said:
What DocHoliday77 suggests is probably the safest method to get what you want. After each update the system will force you to wait 24 hours before you can make the next update. That would be three days to get to NE4, the first 4.4.2 release by AT&T, which you need to run lollipop ROMs. If you want to update to the current release (NJ2) that would be two additional days.
You can shortcut the required waiting period by manually advancing the system date after each update.
In addition to not allowing you to use the free unlock, once you take the 4.3 bootloader it prevents you from downgrading bootloaders. Newer bootloaders do the same, downgrading will be a thing of the past. (I never took the official 4.3 bootloader until the stagefright scare came along and I went from my older custom ROM to a new release.)
Click to expand...
Click to collapse
1:- Okay I fully understood what I have to do to flash lolly pop . But confused a little bit . If I have original boodloader than it should be easier to restore my stock 4.1.1 . Backup (still not clear) .
2:- I am out of USA. The device in unlocked. I am using ZONG sim on it. So the question is can I still update the device via OTA.
Thanks
mango man said:
1:- Okay I fully understood what I have to do to flash lolly pop . But confused a little bit . If I have original boodloader than it should be easier to restore my stock 4.1.1 . Backup (still not clear) .
2:- I am out of USA. The device in unlocked. I am using ZONG sim on it. So the question is can I still update the device via OTA.
Thanks
Click to expand...
Click to collapse
When you say original bootloader I don't know which you have. My i747 came with 4.1.1 but before I could get it out of the clerk's hands they had taken the OTA to change it from DLK3/4.1.1 bootloader and stock rom to MG2/4.1.2 bootloader and stock rom. Even more confusing I have read reviews that state the SGS3 was originally released with android 4.0.4.
If your original bootloader was older than 4.3 (MJB) AND you have never upgraded to MJB or newer, then you can safely return to stock 4.1.1.
To get OTAs you need to be on the stock ROM, at least you do in the USA. I don't know if that holds true elsewhere.
I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk
dawgdoc said:
When you say original bootloader I don't know which you have. My i747 came with 4.1.1 but before I could get it out of the clerk's hands they had taken the OTA to change it from DLK3/4.1.1 bootloader and stock rom to MG2/4.1.2 bootloader and stock rom. Even more confusing I have read reviews that state the SGS3 was originally released with android 4.0.4.
If your original bootloader was older than 4.3 (MJB) AND you have never upgraded to MJB or newer, then you can safely return to stock 4.1.1.
To get OTAs you need to be on the stock ROM, at least you do in the USA. I don't know if that holds true elsewhere.
Click to expand...
Click to collapse
DocHoliday77 said:
I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thanks men for quick response.
now I m fully confused. Don't know what to do. because I don't want to stuck on this battery enemy rom. (Aokp kitkat. Custom rom )
I am not clear about boootader version (PHONE INFO SAMSUNG APP SAYS ITS i747ucdlk3 ) but I know when got this thing. It was android 4.1.1 . Which I have back a backup. As per I am out of att network and I can't get OTA,s so I don't need to revert to 4.1.1 backup. I think I have to find out 4.3. For my device. So kindly please inform me if some one knows about . Iwill be very thankful to u people.
Again thanks
DocHoliday77 said:
I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I got this while searching online. Please tell me if it is helpful for.me.
http://androidromupdate.com/att-samsung-galaxy-s3-sgh-i747-odin-stock-firmware/
Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yup! I think it is. Will try . Thanks
mango man said:
Yup! I think it is. Will try . Thanks
Click to expand...
Click to collapse
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)
DocHoliday77 said:
Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)
mango man said:
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)
Click to expand...
Click to collapse
To be able to run a lollipop rom you will need to update bootloader and modem. Update them together, this is important once you reach the 4.4.2 level of bootloader and modem that you will need to run lollipop roms. Once you reach 4.4.2 you will brick your phone if the bootloader and modem versions are not the same.
Before starting to flash any of the files you need to get you up and running on lollipop, I strongly suggest you download all you need from start to finish. Store the files you will need in the upgrade process either on an external sdcard or on the root of your internal sdcard. I haven't used CWM Recovery on my SGS3 since shortly after rooting it, I have been using TWRP since then, and I don't recall all of the capabilities of CWM recovery. If the CWM version you have will not let you flash from an external sdcard you will need to store the files you will use on the root of the internal card to be able to flash them. It will be easier to do this before you start, unless you are comfortable with pushing files from a computer using adb.
BEFORE DOING ANYTHING I AM SUGGESTING read enough that you thoroughly understand what I am saying. After reading, ask questions for clarification. Be sure you have no doubts.
Decide if you intend to install a rom along with the bootloader and modem at each upgrade; or if you are going to install updating only bootloader and modem until you get them to them point that you can run a lollipop ROM. Since you said you can not do OTA updates, either way will work. Whichever you decide, you can not skip directly to the bootloader and modem you need for lollipop.
If you are installing bootloader and modems without the rom:
From the stock 4.1.1 rom and bootloader you can go straight to 4.3 bootloader and modem, skipping the 4.1.2 (MG2) version. I have personally done this with no ill consequences. After 4.3, install the first bootloader and modem version for 4.4.2, that is NE4. Lollipop will run with the NE4 bootloader. As DocHoliday stated, you can go on the the current bootloader and modem. After NE4 is NJ1. After NJ1 you come to the current bootloader and modem, which is NJ2
If you plan to install the full ROM at each step.
The page you linked to should work if all of the downloads are available. Go from 4.1.1 to 4.3 to 4.4.2 (NE4). If you want the newer versions (NJ1 or NJ2) do them in sequence, do not skip any that are mentioned. Read the instructions on your linked page carefully. If you want NJ1 and then NJ2 they can be found in threads by enewman17, as can NE4 and maybe 4.3. I didn't provide the links so that you will hopefully read the pages carefully after searching and before downloading. Be sure you understand what you are downloading to flash and how it should be used.
dawgdoc said:
To be able to run a lollipop rom you will need to update bootloader and modem. Update them together, this is important once you reach the 4.4.2 level of bootloader and modem that you will need to run lollipop roms. Once you reach 4.4.2 you will brick your phone if the bootloader and modem versions are not the same.
Before starting to flash any of the files you need to get you up and running on lollipop, I strongly suggest you download all you need from start to finish. Store the files you will need in the upgrade process either on an external sdcard or on the root of your internal sdcard. I haven't used CWM Recovery on my SGS3 since shortly after rooting it, I have been using TWRP since then, and I don't recall all of the capabilities of CWM recovery. If the CWM version you have will not let you flash from an external sdcard you will need to store the files you will use on the root of the internal card to be able to flash them. It will be easier to do this before you start, unless you are comfortable with pushing files from a computer using adb.
BEFORE DOING ANYTHING I AM SUGGESTING read enough that you thoroughly understand what I am saying. After reading, ask questions for clarification. Be sure you have no doubts.
Decide if you intend to install a rom along with the bootloader and modem at each upgrade; or if you are going to install updating only bootloader and modem until you get them to them point that you can run a lollipop ROM. Since you said you can not do OTA updates, either way will work. Whichever you decide, you can not skip directly to the bootloader and modem you need for lollipop.
If you are installing bootloader and modems without the rom:
From the stock 4.1.1 rom and bootloader you can go straight to 4.3 bootloader and modem, skipping the 4.1.2 (MG2) version. I have personally done this with no ill consequences. After 4.3, install the first bootloader and modem version for 4.4.2, that is NE4. Lollipop will run with the NE4 bootloader. As DocHoliday stated, you can go on the the current bootloader and modem. After NE4 is NJ1. After NJ1 you come to the current bootloader and modem, which is NJ2
If you plan to install the full ROM at each step.
The page you linked to should work if all of the downloads are available. Go from 4.1.1 to 4.3 to 4.4.2 (NE4). If you want the newer versions (NJ1 or NJ2) do them in sequence, do not skip any that are mentioned. Read the instructions on your linked page carefully. If you want NJ1 and then NJ2 they can be found in threads by enewman17, as can NE4 and maybe 4.3. I didn't provide the links so that you will hopefully read the pages carefully after searching and before downloading. Be sure you understand what you are downloading to flash and how it should be used.
Click to expand...
Click to collapse
Thanks **** I need to be extra careful before taking any step. I am going to collect all relesed OTA,s. By now I onky need the links for ota. Thanks
Flash MJB and NE4 from the site you linked to above. Then use enewman17's thread for the NJ1 and NJ2 updates. He also has NE4, in case you want to get all the OTA'S from him. (Downloads will be a lot faster) They've all been used many times. I'll try to post a direct link in a few...
Sent from my SGH-T999 using Tapatalk
---------- Post added at 09:48 PM ---------- Previous post was at 09:39 PM ----------
NE4
http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
NJ1
http://forum.xda-developers.com/showthread.php?t=2941792
NJ1 and NJ2
http://forum.xda-developers.com/showthread.php?t=2985006
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Flash MJB and NE4 from the site you linked to above. Then use enewman17's thread for the NJ1 and NJ2 updates. He also has NE4, in case you want to get all the OTA'S from him. (Downloads will be a lot faster) They've all been used many times. I'll try to post a direct link in a few...
Sent from my SGH-T999 using Tapatalk
---------- Post added at 09:48 PM ---------- Previous post was at 09:39 PM ----------
NE4
http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
NJ1
http://forum.xda-developers.com/showthread.php?t=2941792
NJ1 and NJ2
http://forum.xda-developers.com/showthread.php?t=2985006
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I got this site having all ota, s . And is linked to the enewman17.
www.androidayos.com/samsung-galaxy-s3-stock-firmware-2/
Lol, I guess they thought they had to provide it somehow! It's a shame they didn't at least acknowledge enewman17 in their article there, but at least they direct linked to his thread.
Anyway, good luck! And if you have any other questions come up, let us know.
Sent from my SGH-T999 using Tapatalk
What's the highest/latest firmware can I go for a Galaxy S3, model SGH-I747...?
I believe 4.4.2 nj2 is the newest.
where can i get the latest rootable odin firmware?
All of the stock firmware is rootable with twrp and supersu.
And where can we get last 4.4.2 for our phone?
I currently have 4.3 on my SGH-I747.
carlonchete said:
And where can we get last 4.4.2 for our phone?
Click to expand...
Click to collapse
If your device is stock the simplest solution would be to take the OTAs until you are at the most recent stock rom (NJ2).
If you are not stock you could revert to stock and take the OTAs. You also have other options. Since you have the i747 you should update sequentially, not skipping any of the releases, if you are on the 4.3 or newer bootloader and modem. (I have read this is not necessary for the i747M.) If you have a custom recovery installed you could use it to load the bootloader and modem files, in order, and then flash a compatible custom ROM. The downloads for the bootloader and modem files are available in threads by enewman17.
I haven't been specific, but then for anyone helping to be specific detailed information is needed.
aldana said:
What's the highest/latest firmware can I go for a Galaxy S3, model SGH-I747...?
Click to expand...
Click to collapse
I'm running CM 12.1 on my phone, and I believe there is even a CM 6.0 ROM out there... I also have the I747
right now from what I can see depending on what model you have the highest I can see is
4.4.2
Model SGH-I747M
Model name GALAXY S III
PDA I747MVLUFOB3
CSC I747MOYCFOB3
If the OP has the i747, nj2 is the newest stock ROM.
Hope the title isn't confusing but I wanted to ask some questions and get some answers without blowing up hsbadr's thread on how to go from LP to MM. So here it goes.
When flashing the full firmware update coming from an already unlocked and rooted Verizon on LP to MM what happens?
Are you back to stock MM rom from Samsung or are you on a modified version of the MM firmware? In other words can I flash the full update and just stay on that base rom?
I believe that is the case and if so hsbadr says we can root and go through the process of unlocking again. What root works best and is it permanent or is it temporary? Is it really temperamental like on LP or will it stick easy enough to unlock?
My purpose in asking is I would like to do all this in phases and help others understand. If I flash the full firmware then I would like to stay on the base rom MM for awhile and when I have time I will unlock the phone.... Again. However if I can't have perm root then flashing the firmware would need to be done in one go with the whole unlocking process.
Any answers are very much appreciated! Thanks ??
Sent from my SM-N910V using Tapatalk
SlothlyDX said:
Hope the title isn't confusing but I wanted to ask some questions and get some answers without blowing up hsbadr's thread on how to go from LP to MM. So here it goes.
When flashing the full firmware update coming from an already unlocked and rooted Verizon on LP to MM what happens?
Are you back to stock MM rom from Samsung or are you on a modified version of the MM firmware? In other words can I flash the full update and just stay on that base rom?
When flashing the full firmware update coming from an already unlocked and rooted Verizon on LP to MM what happens?
My purpose in asking is I would like to do all this in phases and help others understand. If I flash the full firmware then I would like to stay on the base rom MM for awhile and when I have time I will unlock the phone.... Again. However if I can't have perm root then flashing the firmware would need to be done in one go with the whole unlocking process.
Any answers are very much appreciated! Thanks
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
When flashing the full firmware update coming from an already unlocked and rooted Verizon on LP to MM what happens?
Click to expand...
Click to collapse
Which full firmware? hsbadr's* is a hybrid Lollipop/Marshmallow version which I don't think would be a suitable daily driver. The full firmware from sammobile will give you Marshmallow as Verizon intended. Either way, your bootloader is locked. Using hsbadr's means your bootloader can be unlocked. The official version, not so much.
With the full official firmware being available, I would not advise using the update.zip method in other threads. Either flash the official firmware in ODIN or take the OTA update. Either way, you'll have a locked bootloader. Rumor has it that you can flash a Lollipop firmware and re-root, but I wasn't about to try. I could bide my time and let the developers work their magic.
* Also extending credit and thanks to ryanbg and beaups who together worked to get us an unlocked Marshmallow bootloader.
My purpose in asking is I would like to do all this in phases and help others understand. If I flash the full firmware then I would like to stay on the base rom MM for awhile and when I have time I will unlock the phone.... Again. However if I can't have perm root then flashing the firmware would need to be done in one go with the whole unlocking process.
Click to expand...
Click to collapse
If you want root... if you think you'll want root... just bite the bullet and do it. Jasmine ROM has all of the benefits of the Verizon version of Marshmallow. If that's good enough, stay there. If you want to explore, that option will be available as well.
Yea I'm talking about hsbadr hybrid. I'm unlocked and rooted on LP using one of his roms right now. Just want sure what the hybrid version of MM meant. Thanks for the help and understanding. Makes sense now.
Sent from my SM-N910V using Tapatalk
I'm struggling with getting my Canadian T805W upgraded to Marshmallow. Everything I try fails. I was running Phoenix Rom, but reverted back to stock Lollipop in the hopes that would help. It didn't.
Some things I've tried:
Latest T805 MM ROM from https://forum.xda-developers.com/ga...ficial-firmware-selection-sm-t700-sm-t2960225 - "Re-Partition operation failed."
Bootloaders:
T805XXU1CPI3 and T805XXU1CPJ1 using Odin 3.1.23 and Odin 1.85 - Both hang on "Get PIT for mapping..." and eventually fail.
Modem:
T805XXU1CPH6 - same as above
Has anyone out there had any luck with upgrading a Canadian T805W to MM? Any help at all would be much appreciated!
Thanks!
The T805W requires a specific firmware for your region. Download the correct firmware for your device.
Well, since there's never been a MM release in this region, I guess I'm screwed.
Thanks for the reply, much appreciated!
eljosho said:
Well, since there's never been a MM release in this region, I guess I'm screwed.
Thanks for the reply, much appreciated!
Click to expand...
Click to collapse
Maybe not.
Do you have root?
Luckily for you Samsung did not upgrade the bootloader, so the Lollipop bootloader is compatible with Marshmallow.
To update you should be able to flash the firmware with FLASHFIRE. Flashfire won't flash the bootloader, but you should be able to update the rest of the firmware.
I would also maybe suggest not updating the modem either for compatibility sake.
Download a suitable stock MM firmware and flash with FLASHFIRE.
What is your actual region and carrier as there are actually several SM-T805W firmwares available?
Yes, rooted and has the latest TWRP installed.
That's fantastic news about the bootloader compatibility!
Region is Canada and the original carrier is Rogers. It's sim unlocked, but I'm not using LTE with my current provider.
Thanks so much for your help!
ashyx said:
Maybe not.
Do you have root?
Luckily for you Samsung did not upgrade the bootloader, so the Lollipop bootloader is compatible with Marshmallow.
To update you should be able to flash the firmware with FLASHFIRE. Flashfire won't flash the bootloader, but you should be able to update the rest of the firmware.
I would also maybe suggest not updating the modem either for compatibility sake.
Download a suitable stock MM firmware and flash with FLASHFIRE.
What is your actual region and carrier as there are actually several SM-T805W firmwares available?
Click to expand...
Click to collapse
eljosho said:
Yes, rooted and has the latest TWRP installed.
That's fantastic news about the bootloader compatibility!
Region is Canada and the original carrier is Rogers. It's sim unlocked, but I'm not using LTE with my current provider.
Thanks so much for your help!
Click to expand...
Click to collapse
Here you go, Marshmallow firmware for Rogers.
http://updato.com/firmware-archive-select-model?record=F10A78CDE2D811E69215FA163EE8F90B
Thanks, that's what I had installed. It's incorrectly named, it's not MM, just the latest LP
But the good news is that my tablet is now on a Nougat ROM and everything is running great!
ashyx said:
Here you go, Marshmallow firmware for Rogers.
http://updato.com/firmware-archive-select-model?record=F10A78CDE2D811E69215FA163EE8F90B
Click to expand...
Click to collapse
eljosho said:
Thanks, that's what I had installed. It's incorrectly named, it's not MM, just the latest LP
But the good news is that my tablet is now on a Nougat ROM and everything is running great!
Click to expand...
Click to collapse
Nougat?
Now that I know that the 5.X bootloader would work with 6.X, I took the chance that it would work with 7.X. I have Resurrection Remix (7.1.2) installed now and it is running great.
ashyx said:
Nougat?
Click to expand...
Click to collapse