Hi guys
I have a T705 and looking at the build info it looks as though the firmware is from Singapore and it came with 5.02.
I downloaded Marshmallow update from the Singpore links, Singapore STH version to be exact, but it gives me an error after flashing with Odin.
It starts booting up after flashing then an android robot appears and it says "installing system update" then a few seconds later it stops with the message "erasing"
Then returns to a black screen with samsung logo and sometimes vibrares without loading any further.
Any recommendations are appreciated thanks!!!!!
It may have been a bad download my suggestion is try updato the you will know what you are downloading........happy flashing.
Related
Hi i am a newbee in this forum and i have trouble with my XDA star (nike), because it stucks in boot-mode and i can not get it alive....
Her is what i did:
- i installed the CleanBlack2ReloadedOffice in german on my XDA Star - it worked perfectly ...
- Today i wanted to upgrade the radio from Nike_Radio_1.58.16.27 to the better one Nike_Radio_1.58.21.23_25.65.30.04S_Modded.
Result: the flashing stopped with 99% an now i am stuck on this boot-screen and my phone is a brick :-( It says:
RUUNBH
NIKI300
SPL-1.16.0000
CPLD-4
I tried several things to get the phone alive - but nothing helped every trial failed with the grey screen and a 0% on it - some 5 Minutes later aborted with error.
I copied the sspl-1.16-nike.exe on the device and started the Update. It stuck on 99% - ended with an error.
But now i am not able to install hard spl or anything else? I allways get the 0%-Load-Screen on the device and after 10 Minutes an 262-Error.
I tried now to load every shipped original rom - but the Rainbow-Start-Screen does not go away. Is there any other chance to get this device again working? Did anyone made experiences with this strange behavior?
I really would be glad, if there is a "howto" get into a working communication process between my "Pc" and my phone? Is there hope to get this device running? Any helpfull advices? Thanks in advance
Help, i installed the twrp recovery and went about installing a rom but when i went to wipe the phone i wiped everything. So now when i try to boot into recovery it just shows the lg logo with the l.e.d cycling. No idea what to do please help.
Can you get into download mode, If so you can flash the stock .kdz for your device with the lg flash tool and you will a stock functioning phone agin. Then you can root and install TWRP again if you would like just like you did the first time. But make SURE that you use CORRECT kdz for your device model remove the batteries and under you should she something like this eith the X being numbers or letters: LG-XXXXX find the .kdz for the XXXXX value and flash it with the lg flash tool
Thanks alot, its working but its taking its time still only at 14%
Your welcome if you still need help just ask
G3 boots into firmware update only
I recently updated my lg G3 ( Google patch update named Aug-18-2015 etc) and it started to malfunction with resets, crashing and eventually got it stuck in boot loop. Then it booted into a green screen that said "demigod crash handler/tz crash" thrice. Instead of a hard reset I decided to using the lg mobile support tool to fix it. During the upgrade recovery my phone went into download mode/firmware update. I could see the progress bar moving and then get stuck and my mobile would switch off. Took out the battery, disconnected and reconnected the phone and tried the process all over again but in vain. I repeated this at least 8 times and eventually gave up. Now my phone is basically useless and only boots into firmware update. Hard reset doesn't work either. Can somebody please help me fix this?
Android version : 5.0
Kernel: 3.4.0
Firmware : v20t-ame-xx
Go to the site: http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/ and search for your device and message me back if it works
red bleud led flash
after i installed twrp latest edition it won't boot into it and it gives me the red and blue led flash even trough the steps by suing the download mode it won't work
HELP PLEASE
Best regards
Exray_NL
Hi guys
purchased mine online and it came from Hong Kong however looking at the build info it looks as though the firmware is from Singapore.
I downloaded Marshmallow update from the Singpore links, Singapore STH version to be exact, but it gives me an error after flashing with Odin.
It starts booting up after flashing then an android robot appears and it says "insralling system update" then a few seconds later it stops with the message "erasing"
Then returns to a black screen with samsung logo and sometimes vibrares without loading any further.
Any recommendations are appreciated thanks!!!!!
Hello Everyone,
This is my first thread on this forum, which i am making because I ran out of options, and don't know what to do....
My Samsung Galaxy S4 mini(GT-I9192) were shut down automatically when i am using it.After then I started my phone again
it starts normally but after the details Samsung Galaxy S4 mini(GT-I9192)comes and it again turn off and again restarts and
this process is going again and again.As I tell you my phone doesn't stuck on a boot as my phone restarts again before the samsung logo comes.
I've tried Emergency firmware upgrade and Initialization through kies but after entering model no. and S/N,
It says 'GT-I9192' does not support initialization. I've done that before with kies it never gives that error I don't know why now.
After That I tried to install stock firmware by Odin in download mode, The process gets completed pass message comes after that my phone reboots in recovery mode and a message print on the bottom "did not match size '/system/csc/common/system/csc/others.xml' (no data available)" i don't know what is that for and after that i reboot my phone and still same thing...
After all that I think maybe its an hardware issue but if it is an hardware issue then how my phone starts and again shutdown so i don't think it's an hardware issue btw i don't know what it is.
So Please If anyone Have any Solution please help me.
Thank You
I have same problem on my galaxy s4 mini gt-i9195 LTE.
first the phone doesnt wanna turn on at all, just show as QHSUSB_DLOAD
after xx hours googling for solution i try unbrick.img which bring the screen back in live:good:
then i try several roms but the phone reject the flash, so i try flash with original stock rom, that went successful
but that doesnt change something, still keep rebooting, even when load recovery it get reboot and keep rebooting.
I don't think that this might be a hardware issue, but something wrong with the android partitions.
I'll keep playing with it hope i find some solution.
If someone read this and has same or similar issue, please post what you have try so far, so we can work on it and find the problem.:highfive:
Thanks for your reply...
As my phone were start after flashing so many times and now it says Device Memory Corrupted Please reset your device to default
settings and there is a reset tab which doesn't working when i keep pressing that so now i think that maybe my eMMC chip was damaged well exactly i don't know that yet....
well for you just try connecting through kies and do a firmware upgrade and if that doesn't working than flash it through odin and also download PIT file for re-partition....
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Call Huawei customer support and get a ticket started to send your phone to the nearest repair center. Best of luck!
Waagic said:
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Click to expand...
Click to collapse