Develop Bugs

[Help] Can't find the right RUU for my phone to get back to Stock

Model: HTC ONE X
Region: EUROPE (originally debranded)
CID: HTC__023
hboot: 1.39.0000
main: 3.20.401.1
I have found the following RUU:
But the version is lower than the one installed in my phone (from 3.20.XXX.X to 3.14.XXX.X).
I have also found a nandroid backup for my CID on the XDA-Developers thread, but it is also older:
"Nandroid Backup 3.17.728.1 CID HTC__023 thanks to adamnz"
Will any of those work as I am not S-OFF?
Here is the output of the fastboot command in case it helps
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162A.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: HT23ZW116643
(bootloader) imei: 359188044319390
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3980mV
(bootloader) devpower: 85
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Thanks in advance!

jfromeo said:
Model: HTC ONE X
Region: EUROPE (originally debranded)
CID: HTC__023
hboot: 1.39.0000
main: 3.20.401.1
I have found the following RUU:
But the version is lower than the one installed in my phone (from 3.20.XXX.X to 3.14.XXX.X).
I have also found a nandroid backup for my CID on the XDA-Developers thread, but it is also older:
"Nandroid Backup 3.17.728.1 CID HTC__023 thanks to adamnz"
Will any of those work as I am not S-OFF?
Here is the output of the fastboot command in case it helps
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162A.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: HT23ZW116643
(bootloader) imei: 359188044319390
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3980mV
(bootloader) devpower: 85
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Thanks in advance!
Click to expand...
Click to collapse
It doesn't look like there are any nandroid backups floating around for your CID.
However, I believe you would be OK with a nandroid such as this as the version-main is identical to yours.

surrealjam said:
It doesn't look like there are any nandroid backups floating around for your CID.
However, I believe you would be OK with a nandroid such as this as the version-main is identical to yours.
Click to expand...
Click to collapse
Thanks a lot mate

jfromeo said:
Thanks a lot mate
Click to expand...
Click to collapse
No problem. Obviously you'll have to go back to the stock recovery which is here.

surrealjam said:
It doesn't look like there are any nandroid backups floating around for your CID.
However, I believe you would be OK with a nandroid such as this as the version-main is identical to yours.
Click to expand...
Click to collapse
surrealjam said:
No problem. Obviously you'll have to go back to the stock recovery which is here.
Click to expand...
Click to collapse
Thanks again!

I have done the following steps:
1. Flashed the boot.img from the backup through fastboot
2. Entered CWM recovery (5.8.4.0)
3. Wiped data, cache and factory reset
4. Restored backup
But it always give me an error: "Error while restoring /system". All the previous checks and actions go as expected. I tried to redownload the backup and got no luck.
Anyone knows why is giving this error? Perhaps the nandroid backup I have downloaded needs to be restored with the same recovery and version of the original one?

Because you didn't wipe the system partition in recovery.
Under mounts and storage - format cache, data and system
And flash the recovery.img from the nand backup if you have the same problem after the above !

Mr Hofs said:
Because you didn't wipe the system partition in recovery.
Under mounts and storage - format cache, data and system
And flash the recovery.img from the nand backup if you have the same problem after the above !
Click to expand...
Click to collapse
Thanks a lot.
I will try it as soon as I get home.
One question about flashing the recovery. The recovery from the nand backup is the CWM recovery right? I am scared of flashing some offical recovery and then not being able to access the CWM one.

You can safely flash the recovery from the nand. It's the custom one, it's the one which the nand is made with.

Mr Hofs said:
You can safely flash the recovery from the nand. It's the custom one, it's the one which the nand is made with.
Click to expand...
Click to collapse
Thanks a lot for your kind help

Great, the backup process ended correctly!
surrealjam said:
No problem. Obviously you'll have to go back to the stock recovery which is here.
Click to expand...
Click to collapse
Now I have a doubt about the recovery I have to flash. Need I to flash the stock one for this RUU or is it independent? I mean, surrealjam point to a stock recovery for the 3.14.XXX.X version, but I am now on the 3.20.401.1 stock. Do I need to flash a "newer" stock recovery, matching the ROM version?

jfromeo said:
Great, the backup process ended correctly!
Now I have a doubt about the recovery I have to flash. Need I to flash the stock one for this RUU or is it independent? I mean, surrealjam point to a stock recovery for the 3.14.XXX.X version, but I am now on the 3.20.401.1 stock. Do I need to flash a "newer" stock recovery, matching the ROM version?
Click to expand...
Click to collapse
I believe 3.14 is the latest stock recovery available and will be fine with the 3.20 firmware. Perhaps Mr Hofs may be able to provide further info though.

Here is the 3.20 one
https://www.dropbox.com/s/pqp1p3tgvyod610/Stock recovery 3.20.img

Thanks Mr Hofs and surrelajam!
Everything went correct

Good !
CASE CLOSED !

Please I have a similar problem!
A friend of mine gave someone her phone who probably tried to update it using fastboot and recovery, but did not succeed. Now the phone can't get past the HTC logo. I don't know what exactly he did to the phone so I'm working on very little. Been up since late last night checking how to fix this. I tried flashing a new custom rom with both twrp and cwm using both sideload and otg cable. With TWRP the process just stops abruptly when flashing system, while it completes in cwm and still the phone doesn't boot. I also notice that both recoveries can't mount system, can't mount cache. but can only mount data.
I then read in a thread that if I can't mount I have to flash RUU with fastboot. I have searched RUU with my main version and the closest I got was a sprint version. But after sending in fastboot I get "12 signature verify failed". I searched for this and I was told it's because I don't have the correct version for my device. Below I've attached an image of my bootloader information, please help!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For some reason the version-main is now blank, but it used to be 1.29.651.10. And all I've found for this version are Sprint roms, but the device is not sprint it's international version.

emmalad92 said:
A friend of mine gave someone her phone who probably tried to update it using fastboot and recovery, but did not succeed. Now the phone can't get past the HTC logo. I don't know what exactly he did to the phone so I'm working on very little. Been up since late last night checking how to fix this. I tried flashing a new custom rom with both twrp and cwm using both sideload and otg cable. With TWRP the process just stops abruptly when flashing system, while it completes in cwm and still the phone doesn't boot. I also notice that both recoveries can't mount system, can't mount cache. but can only mount data.
I then read in a thread that if I can't mount I have to flash RUU with fastboot. I have searched RUU with my main version and the closest I got was a sprint version. But after sending in fastboot I get "12 signature verify failed". I searched for this and I was told it's because I don't have the correct version for my device. Below I've attached an image of my bootloader information, please help!
View attachment 2825096
For some reason the version-main is now blank, but it used to be 1.29.651.10. And all I've found for this version are Sprint roms, but the device is not sprint it's international version.
Click to expand...
Click to collapse
You have a M7...a HTC ONE ?! This is the HTC ONE X forum.you are definitely in the wrong forum !!!

help stuck on htc screen day 3

Please help it is the third day i have been stuck.
I have plowed through past posts and tried endless fixes but I am still stuck
I am about to throw my HTC One X out the window.
I have a problem flashing img file each time my PC says 'file is corrupted'
I will include this as it may help
C:\WINDOWS\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.401.4
(bootloader) serialno: SH28MW105805
(bootloader) imei: 353995055058055
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3644mV
(bootloader) devpower: 1
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Could somebody please help Thanks

sorojim said:
Please help it is the third day i have been stuck.
I have plowed through past posts and tried endless fixes but I am still stuck
I am about to throw my HTC One X out the window.
I have a problem flashing img file each time my PC says 'file is corrupted'
I will include this as it may help
C:\WINDOWS\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.401.4
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3644mV
(bootloader) devpower: 1
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
Could somebody please help Thanks
Click to expand...
Click to collapse
first delete your S/N and IMEI. Second little bit more explenation will be good what IMG what you want to do with the phone are you have custom recovery or you are with stock rom and recovery?

Thant said:
first delete your S/N and IMEI. Second little bit more explenation will be good what IMG what you want to do with the phone are you have custom recovery or you are with stock rom and recovery?
Click to expand...
Click to collapse
Hello Thant
I have been trying to install CynanenMod
but now I find I can not flash :
the fastboot file CMD sas was good but it is can not be seen on the phone sd
boot.img and recovery.img (I put full name when I flash) my PC says 'files corrupted' even if I get them from different sources.
I have: recovery-clockwork-touch-5.8.4.0-endeavoru installed.
I did not make a back up ( I Know ) so am stuck
THX for your help

sorojim said:
Hello Thant
I have been trying to install CynanenMod
but now I find I can not flash :
the fastboot file CMD sas was good but it is can not be seen on the phone sd
boot.img and recovery.img (I put full name when I flash) my PC says 'files corrupted' even if I get them from different sources.
I have: recovery-clockwork-touch-5.8.4.0-endeavoru installed.
I did not make a back up ( I Know ) so am stuck
THX for your help
Click to expand...
Click to collapse
wich CM11 or CM10.2. Now flash philz recovery 5.15.9 then mount sd card copy new rom to your sd card after this take the boot.img from your rom archive and flash it via fastboot. But if you want to flash CM11 you need latest recovery and after all procedure up after finish with sd card install latest philz recovery becouse in latest philz recovery sd card mountin not work but in 5.15.9 work great
you must to use boot.img from rom archive every time you flash new rom and wipe everithyng except sd card second is if you flash different roms

Thant said:
wich CM11 or CM10.2. Now flash philz recovery 5.15.9 then mount sd card copy new rom to your sd card after this take the boot.img from your rom archive and flash it via fastboot. But if you want to flash CM11 you need latest recovery and after all procedure up after finish with sd card install latest philz recovery becouse in latest philz recovery sd card mountin not work but in 5.15.9 work great
you must to use boot.img from rom archive every time you flash new rom and wipe everithyng except sd card second is if you flash different roms
Click to expand...
Click to collapse
I just downloaded ' fastboot_flash_recovery_philz_touch_6.47.3-a110.img ' could not find ' philz recovery 5.15.9 '
and get 'The disc image file is corrupted' when I flash in CMD.

sorojim said:
I just downloaded ' fastboot_flash_recovery_philz_touch_6.47.3-a110.img ' could not find ' philz recovery 5.15.9 '
and get 'The disc image file is corrupted' when I flash in CMD.
Click to expand...
Click to collapse
Is it a fault on my PC and could it be patched or adjusted
Thanks

sorojim said:
Is it a fault on my PC and could it be patched or adjusted
Thanks
Click to expand...
Click to collapse
download THIS fastboot and extract it to c:\fastboot folder after this download this RECOVERY PHILZ 5.15.9 and take the recovery.img inside from arhive and place in c:\fastboot directory then open cmd and type fastboot devices you must see your s/n your bootloader must be unlocked then type fastboot flash recovery recovery.img
Report back

Report back[/QUOTE]
Hi Thant
We are almost there
I did as you said and everything loaded (I'm so happy)
the only problem now is I get the message ' Unfortunatley the setup wizard has stopped '
so I press OK and the message pops up again and again so I can't setup the phone
I loaded CyanogenMod 10.2.1 stable
Cheers for your help

sorojim said:
Report back
Click to expand...
Click to collapse
Hi Thant
We are almost there
I did as you said and everything loaded (I'm so happy)
the only problem now is I get the message ' Unfortunatley the setup wizard has stopped '
so I press OK and the message pops up again and again so I can't setup the phone
I loaded CyanogenMod 10.2.1 stable
Cheers for your help[/QUOTE]
change the rom to CM11 or sense some newer rom where have support leave 10.2, but first copy the new rom to sd card after this flash latest CWM, PHILZ or TWRP2.7 and flash any rom you like it
This ' Unfortunatley the setup wizard has stopped ' is because of rom.
Are you do a full wipe except sd crad from recovery before install the rom

Thant said:
Hi Thant
We are almost there
I did as you said and everything loaded (I'm so happy)
the only problem now is I get the message ' Unfortunatley the setup wizard has stopped '
so I press OK and the message pops up again and again so I can't setup the phone
I loaded CyanogenMod 10.2.1 stable
Cheers for your help
Click to expand...
Click to collapse
change the rom to CM11 or sense some newer rom where have support leave 10.2, but first copy the new rom to sd card after this flash latest CWM, PHILZ or TWRP2.7 and flash any rom you like it
This ' Unfortunatley the setup wizard has stopped ' is because of rom.
Are you do a full wipe except sd crad from recovery before install the rom[/QUOTE]
Actually I just updated my gapps and all is good
Thanks a lot mate if your ever in Paris PM me and I'll buy you a pint
Cheers

sorojim said:
Actually I just updated my gapps and all is good
Thanks a lot mate if your ever in Paris PM me and I'll buy you a pint
Cheers
Click to expand...
Click to collapse
no problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

one m8 stuck in bootloader ( no recovery, no os and relocked )

hello everyone
i've got an international m8 stuck in bootloader: if i turn it on, it will start in bootloader mode; it doesn't start in recovery and OS is blank. i've tried to flash recovery or hboot but i couldn't because it is relocked and s-on .
moreover model id and serial number are currupted :
version: 0.5
version-bootloader: 3.18.0.0000
version-baseband: 1.19.21331147A1
version-cpld: None
version-microp: None
version-main:
version-misc: UNKNOWN SHIP S-ON
serialno: ¢v×KÖÃ/eg)╗©õ¶¨
imei: __________________
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: ☻◄
cidnum: HTC__203
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 5e4b24e4
hbootpreupdate: 11
gencheckpt: 0

Haven't seen this before. Did you try to do anything before this happened?

Try getting your bootloader unlocked and flashing a custom recovery. Or if you have a SD card, try placing a firmware inside to let the system install the firmware. I'm s-on so I know not much about s-off. Or you can always send it back to warranty stating that you have no idea what happen to your device

I had that happen to me when I relocked the boot loader your going to have to run the appropriate ruu on your pc with your phone plugged in and on the bootloader screen

redsocks95 said:
hello everyone
i've got an international m8 stuck in bootloader: if i turn it on, it will start in bootloader mode; it doesn't start in recovery and OS is blank. i've tried to flash recovery or hboot but i couldn't because it is relocked and s-on .
moreover model id and serial number are currupted :
version: 0.5
version-bootloader: 3.18.0.0000
version-baseband: 1.19.21331147A1
version-cpld: None
version-microp: None
version-main:
version-misc: UNKNOWN SHIP S-ON
serialno: ¢v×KÖÃ/eg)╗©õ¶¨
imei: __________________
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: ☻◄
cidnum: HTC__203
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 5e4b24e4
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Ok think i figured this out was in the same boat you need to :
1:Boot into your bootloader
2:click fastboot
3:goto computer download squabbis htc one toolkit 3.2.x
4:install drivers for htc if you havent already
5:click fastboot got to the flash section
6n your computer download newest custom recovery you want
7:locate file from flash section then select partition recovery should have your custom recovery back
8:install desired rom from sd card if no sd card can be viewed try mounting it if that doesnt work reboot into recovery and click fast boot go back to computer open cmd where from your abd folder is and type in "fastboot oem enableqxdm 0"
hope this helps please report back to let me know if it worked
CHEERS plz click thanks if this helps anyone else

i can't flash recovery because my bootloader is relocked ( if i try ., it'll say "FAILED (remote: signature verify fail)" )
i tried to unlock bootloader but htcdev give me an error ( Error Code: 150) :
<<We're sorry, but it appears your attempt to unlock the bootloader on this device has failed. This could be caused by several factors including simple errors in the entry of the unlock token, problems with your device, or a lack of manufacturer support for the unlocking process. Please see the specific error code listed below, and try again if necessary.
Error Code: 150.
Error Reason: Extract Token Information Fail>>

redsocks95 said:
i can't flash recovery because my bootloader is relocked ( if i try ., it'll say "FAILED (remote: signature verify fail)" )
i tried to unlock bootloader but htcdev give me an error ( Error Code: 150) :
<<We're sorry, but it appears your attempt to unlock the bootloader on this device has failed. This could be caused by several factors including simple errors in the entry of the unlock token, problems with your device, or a lack of manufacturer support for the unlocking process. Please see the specific error code listed below, and try again if necessary.
Error Code: 150.
Error Reason: Extract Token Information Fail>>
Click to expand...
Click to collapse
Try the token again. You have to copy and paste everything including the <<<<< >>>>> but none of the "bootloader" stuff on the side.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Make sure you don't have any "spaces" selected in it too.
Should be a problem with the copy/paste of the code, the reason says it all.

BerndM14 said:
Try the token again. You have to copy and paste everything including the <<<<< >>>>> but none of the "bootloader" stuff on the side.
Make sure you don't have any "spaces" selected in it too.
Should be a problem with the copy/paste of the code, the reason says it all.
Click to expand...
Click to collapse
i've tried several of times butg nothing , every time i get error 150

redsocks95 said:
i've tried several of times butg nothing , every time i get error 150
Click to expand...
Click to collapse
I know this is an old topic but for those experiencing the same problem, you need to go through the token request process via HTCDev all over AGAIN. The old token that you used to unlock is not valid after you relock as it has a different value.
Once you get the new token you can copy it to the fastboot folder and then in command prompt use the command fastboot flash unlocktoken Unlock_code.bin to unlock.
Hope this will be useful to someone in a similar dilema.

I Need Orginal RUU For My Htc one m8

I Need Orginal RUU For My Htc one m8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

We need more info, since the OS number has been wiped out (known bug with older versions of TWRP).
Connect the phone to computer, and do fastboot getvar all, and post the results (delete IMEI and serial number before posting).

(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331831.A15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.180s

That RUUs for your versions are somewhat hard to find.
It looks like you can get the Marshmallow RUU (6.15.720.2) for your version here: http://forum.gsmdevelopers.com/showthread.php?t=436
Although I can't confirm the source or the validity of the file. But it will only flash to an s-on device if it's signed. And the chance of a malicious file being properly signed with the proper HTC keys is about zero. So if it flashes, I'd say it's legit and safe.
It was previously posted to XDA here: https://forum.xda-developers.com/showpost.php?p=66189202&postcount=17
But the link has since gone dead. You will however find the link on the last post in the thread, how to flash zip versions RUUs (if you don't know how): https://forum.xda-developers.com/showpost.php?p=67198911&postcount=25

redpoint73 said:
That RUUs for your versions are somewhat hard to find.
It looks like you can get the Marshmallow RUU (6.15.720.2) for your version here: http://forum.gsmdevelopers.com/showthread.php?t=436
Although I can't confirm the source or the validity of the file. But it will only flash to an s-on device if it's signed. And the chance of a malicious file being properly signed with the proper HTC keys is about zero. So if it flashes, I'd say it's legit and safe.
It was previously posted to XDA here: https://forum.xda-developers.com/showpost.php?p=66189202&postcount=17
But the link has since gone dead. You will however find the link on the last post in the thread, how to flash zip versions RUUs (if you don't know how): https://forum.xda-developers.com/showpost.php?p=67198911&postcount=25
Click to expand...
Click to collapse
thanks
i do exactly what you type
but with the two methods an error message
Device halted due to Large Image update
and in fastboot method it shows
target reported max download size of 1826418688 bytes

I think an Ruu exe will fix it not an update zip file ? What do you think ??

You need to install its firmware first before you can use that ruu zip.
I believe it will be easier for you, use lollipop ruu exe then OTA to the latest.
Get your ruu exe 4.18.720.8 from here http://androidruu.com/?developer=M8

Same thing
Any fix please
https://ibb.co/nzjE65

How can it be same thing when the above RUU 4.18.720.8 is RUU.exe ?
I guess you're not using the above RUU.exe because your first pic show hboot 3.16 but second pic show hboot 3.19 & OS is not 4.18.720.8... how come ?
Not easy to help when advise is not followed.

ckpv5 said:
How can it be same thing when the above RUU 4.18.720.8 is RUU.exe ?
I guess you're not using the above RUU.exe because your first pic show hboot 3.16 but second pic show hboot 3.19 & OS is not 4.18.720.8... how come ?
Not easy to help when advise is not followed.
Click to expand...
Click to collapse
its not exe
And i follow the exact steps
Put the zip in sd card and rename it

I think they changed even if the installation is failled

Klnu2000 said:
its not exe
And i follow the exact steps
Put the zip in sd card and rename it
Click to expand...
Click to collapse
You downloaded different file ...
I advised you to download RUU_M8_UHL_L50_SENSE60_MR_hTC_Asia_India_4.18.720.8_Radio_1.24.21331147A1.09G_20.68.4196.01_F_release_417228_signed.exe
from here - http://androidruu.com/?developer=M8
It's a exe not zip
Your post #1 - your screenshot show you're on 1.xx.720.x firmware
Your post #8 - your screenshot show you're on 3.35.720.1 firmware and it shows you tried to install a RUU zip which is meant for different MID (Model ID) so I believe it is not a x.xx.720.x ... which RUU zip that you tried ?
Can you post your fastboot getvar all (minus serial & imei no.) to make sure you have an Indian variant M8.

Klnu2000 said:
I think they changed even if the installation is failled
Click to expand...
Click to collapse
Your thinking would be incorrect. Failed RUU install means nothing is changed.

Finally its work but there is aproblem
No network ? Sim not found or inserted , how to fix it please i think i must change the modem radio , but how and wich

Klnu2000 said:
Finally its work but there is aproblem
No network ? Sim not found or inserted , how to fix it please i think i must change the modem radio , but how and wich
Click to expand...
Click to collapse
Nobody can possibly answer this question properly, or help you further; since you never provided the information requested by ckpv5 in the previous post. The info may shed light on why you have the current "no SIM" issue; and how to properly proceed:
ckpv5 said:
Your post #8 - your screenshot show you're on 3.35.720.1 firmware and it shows you tried to install a RUU zip which is meant for different MID (Model ID) so I believe it is not a x.xx.720.x ... which RUU zip that you tried ?
Can you post your fastboot getvar all (minus serial & imei no.) to make sure you have an Indian variant M8.
Click to expand...
Click to collapse

Need help with My M8

hi
i installed leneage OS on my device few months back then used it few days then left it in my drawer , a few days back when i started my phone i saw a vertical colored lines on screen and i can barley see what came to my mind is that a software issue so what did i do is went to recovery did a full wipe (system as well) and that is my mistake , screen became worse in i cant see any thing except lines still im able to boot into bootloader , fastboot etc..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader)
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 6(s)
My Device status now is Unlocked TWRP recovery and No OS
thanks in advance

Cutrus said:
hi
i installed leneage OS on my device few months back then used it few days then left it in my drawer , a few days back when i started my phone i saw a vertical colored lines on screen and i can barley see what came to my mind is that a software issue so what did i do is went to recovery did a full wipe (system as well) and that is my mistake , screen became worse in i cant see any thing except lines still im able to boot into bootloader , fastboot etc..
My Device status now is Unlocked TWRP recovery and No OS
thanks in advance
Click to expand...
Click to collapse
Please remove your imei and serialno
Do those lines appear in twrp menu?
Have you tried flashing a different rom?

Saleen28 said:
Please remove your imei and serialno
Do those lines appear in twrp menu?
Have you tried flashing a different rom?
Click to expand...
Click to collapse
Yes they are , i reflashed the os at the beginning same results

Saleen28 said:
Please remove your imei and serialno
Do those lines appear in twrp menu?
Have you tried flashing a different rom?
Click to expand...
Click to collapse
uploaded a picture

Seems like hardware issue imo.
Your M8 is blue - have you changed the unibody or it was just a blue model?
Also - was your drawer a dry place? Maybe some moisture somehow got into it.

Saleen28 said:
Seems like hardware issue imo.
Your M8 is blue - have you changed the unibody or it was just a blue model?
Also - was your drawer a dry place? Maybe some moisture somehow got into it.
Click to expand...
Click to collapse
Yes blue , I've store it in his original box in a dry place

I'd flash a ruu as a last line of defense if it's a software thing.
If that doesn't help then it's a hardware problem, probably the screen. If you're lucky then reconnecting the screen ribbon might fix it, if not - you need a screen replacement.

Saleen28 said:
I'd flash a ruu as a last line of defense if it's a software thing.
If that doesn't help then it's a hardware problem, probably the screen. If you're lucky then reconnecting the screen ribbon might fix it, if not - you need a screen replacement.
Click to expand...
Click to collapse
Tried to flash a RUU halted at this message when i flash the RUU
fail43 main version check fail
Didn't figure out how to pass it

Cutrus said:
Tried to flash a RUU halted at this message when i flash the RUU
fail43 main version check fail
Didn't figure out how to pass it
Click to expand...
Click to collapse
This error tells that you're trying to flash a ruu that is lower than your current firmware. Try this one - https://androidfilehost.com/?fid=24369303960687057
Also a short guide I've found, just in case
ckpv5 said:
For S-On
fastboot oem lock (to relock bootloader)
fastboot reboot-bootloader (reboot to bootloader after relock)
fastboot oem rebootRUU (put the device in RUU mode)
htc_fastboot flash zip RUU.zip (to install RUU)
Click to expand...
Click to collapse