Develop Bugs

[Help] Can't find the right RUU for my phone to get back to Stock

Model: HTC ONE X
Region: EUROPE (originally debranded)
CID: HTC__023
hboot: 1.39.0000
main: 3.20.401.1
I have found the following RUU:
But the version is lower than the one installed in my phone (from 3.20.XXX.X to 3.14.XXX.X).
I have also found a nandroid backup for my CID on the XDA-Developers thread, but it is also older:
"Nandroid Backup 3.17.728.1 CID HTC__023 thanks to adamnz"
Will any of those work as I am not S-OFF?
Here is the output of the fastboot command in case it helps
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162A.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: HT23ZW116643
(bootloader) imei: 359188044319390
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3980mV
(bootloader) devpower: 85
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Thanks in advance!

jfromeo said:
Model: HTC ONE X
Region: EUROPE (originally debranded)
CID: HTC__023
hboot: 1.39.0000
main: 3.20.401.1
I have found the following RUU:
But the version is lower than the one installed in my phone (from 3.20.XXX.X to 3.14.XXX.X).
I have also found a nandroid backup for my CID on the XDA-Developers thread, but it is also older:
"Nandroid Backup 3.17.728.1 CID HTC__023 thanks to adamnz"
Will any of those work as I am not S-OFF?
Here is the output of the fastboot command in case it helps
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162A.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: HT23ZW116643
(bootloader) imei: 359188044319390
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3980mV
(bootloader) devpower: 85
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Thanks in advance!
Click to expand...
Click to collapse
It doesn't look like there are any nandroid backups floating around for your CID.
However, I believe you would be OK with a nandroid such as this as the version-main is identical to yours.

surrealjam said:
It doesn't look like there are any nandroid backups floating around for your CID.
However, I believe you would be OK with a nandroid such as this as the version-main is identical to yours.
Click to expand...
Click to collapse
Thanks a lot mate

jfromeo said:
Thanks a lot mate
Click to expand...
Click to collapse
No problem. Obviously you'll have to go back to the stock recovery which is here.

surrealjam said:
It doesn't look like there are any nandroid backups floating around for your CID.
However, I believe you would be OK with a nandroid such as this as the version-main is identical to yours.
Click to expand...
Click to collapse
surrealjam said:
No problem. Obviously you'll have to go back to the stock recovery which is here.
Click to expand...
Click to collapse
Thanks again!

I have done the following steps:
1. Flashed the boot.img from the backup through fastboot
2. Entered CWM recovery (5.8.4.0)
3. Wiped data, cache and factory reset
4. Restored backup
But it always give me an error: "Error while restoring /system". All the previous checks and actions go as expected. I tried to redownload the backup and got no luck.
Anyone knows why is giving this error? Perhaps the nandroid backup I have downloaded needs to be restored with the same recovery and version of the original one?

Because you didn't wipe the system partition in recovery.
Under mounts and storage - format cache, data and system
And flash the recovery.img from the nand backup if you have the same problem after the above !

Mr Hofs said:
Because you didn't wipe the system partition in recovery.
Under mounts and storage - format cache, data and system
And flash the recovery.img from the nand backup if you have the same problem after the above !
Click to expand...
Click to collapse
Thanks a lot.
I will try it as soon as I get home.
One question about flashing the recovery. The recovery from the nand backup is the CWM recovery right? I am scared of flashing some offical recovery and then not being able to access the CWM one.

You can safely flash the recovery from the nand. It's the custom one, it's the one which the nand is made with.

Mr Hofs said:
You can safely flash the recovery from the nand. It's the custom one, it's the one which the nand is made with.
Click to expand...
Click to collapse
Thanks a lot for your kind help

Great, the backup process ended correctly!
surrealjam said:
No problem. Obviously you'll have to go back to the stock recovery which is here.
Click to expand...
Click to collapse
Now I have a doubt about the recovery I have to flash. Need I to flash the stock one for this RUU or is it independent? I mean, surrealjam point to a stock recovery for the 3.14.XXX.X version, but I am now on the 3.20.401.1 stock. Do I need to flash a "newer" stock recovery, matching the ROM version?

jfromeo said:
Great, the backup process ended correctly!
Now I have a doubt about the recovery I have to flash. Need I to flash the stock one for this RUU or is it independent? I mean, surrealjam point to a stock recovery for the 3.14.XXX.X version, but I am now on the 3.20.401.1 stock. Do I need to flash a "newer" stock recovery, matching the ROM version?
Click to expand...
Click to collapse
I believe 3.14 is the latest stock recovery available and will be fine with the 3.20 firmware. Perhaps Mr Hofs may be able to provide further info though.

Here is the 3.20 one
https://www.dropbox.com/s/pqp1p3tgvyod610/Stock recovery 3.20.img

Thanks Mr Hofs and surrelajam!
Everything went correct

Good !
CASE CLOSED !

Please I have a similar problem!
A friend of mine gave someone her phone who probably tried to update it using fastboot and recovery, but did not succeed. Now the phone can't get past the HTC logo. I don't know what exactly he did to the phone so I'm working on very little. Been up since late last night checking how to fix this. I tried flashing a new custom rom with both twrp and cwm using both sideload and otg cable. With TWRP the process just stops abruptly when flashing system, while it completes in cwm and still the phone doesn't boot. I also notice that both recoveries can't mount system, can't mount cache. but can only mount data.
I then read in a thread that if I can't mount I have to flash RUU with fastboot. I have searched RUU with my main version and the closest I got was a sprint version. But after sending in fastboot I get "12 signature verify failed". I searched for this and I was told it's because I don't have the correct version for my device. Below I've attached an image of my bootloader information, please help!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For some reason the version-main is now blank, but it used to be 1.29.651.10. And all I've found for this version are Sprint roms, but the device is not sprint it's international version.

emmalad92 said:
A friend of mine gave someone her phone who probably tried to update it using fastboot and recovery, but did not succeed. Now the phone can't get past the HTC logo. I don't know what exactly he did to the phone so I'm working on very little. Been up since late last night checking how to fix this. I tried flashing a new custom rom with both twrp and cwm using both sideload and otg cable. With TWRP the process just stops abruptly when flashing system, while it completes in cwm and still the phone doesn't boot. I also notice that both recoveries can't mount system, can't mount cache. but can only mount data.
I then read in a thread that if I can't mount I have to flash RUU with fastboot. I have searched RUU with my main version and the closest I got was a sprint version. But after sending in fastboot I get "12 signature verify failed". I searched for this and I was told it's because I don't have the correct version for my device. Below I've attached an image of my bootloader information, please help!
View attachment 2825096
For some reason the version-main is now blank, but it used to be 1.29.651.10. And all I've found for this version are Sprint roms, but the device is not sprint it's international version.
Click to expand...
Click to collapse
You have a M7...a HTC ONE ?! This is the HTC ONE X forum.you are definitely in the wrong forum !!!

Sorry, but neex help with One X

Hello guys, I am on vacations at my cousin's apartment who lives on the other side of the world (Croatia). He has an HTC One X that he doesn't use because he says the battery doesnt last long. I have a few questions that I hope I can get helped with since I will stay here for only 2 more days. I bought an HTC One M7 a year ago as my first Android and learned on my own how to S-OFF, SuperCID and flash ARHD... so I am looking to do the same on his device, but don't have much time to research on my own.
1) His phone says One X UKR on the back (a sticker since he has never used it it seems). Is the hardware different to, say AT&T version? I remember that all HTC One M7 were the same so there was no problem SuperCIDing to 11111111 and flashing any firmware thereafter
2) What is the least demanding ROM I can install so that the battery lasts the longest? The simplest the better as my cousin is 52 years old and cant be bothered learning a difficult OS.
3) Are there any drivers for One X for Windows 8.1? I have a Surface Pro tablet, nothing else.
4) What are the HBTOOT requirements for S-OFF?
Thanks.

If it is an international one x then you can't achieve s-off without sending it to a specialist shop which are very rare.
You can unlock the bootloader at htcdev website and install any Rom you like without s-off but you will need to flash the boot.img from a pc using fastboot commands
If you boot into the bootloader by holding volume down & power it should tell you at the top which version you have:
endeavour u (international tegra3)
Evita (us snapdragon)
As for windows 8 drivers, I know they are available but not sure where to get them from mate, just search google

intel007 said:
If it is an international one x then you can't achieve s-off without sending it to a specialist shop which are very rare.
You can unlock the bootloader at htcdev website and install any Rom you like without s-off but you will need to flash the boot.img from a pc using fastboot commands
If you boot into the bootloader by holding volume down & power it should tell you at the top which version you have:
endeavour u (international tegra3)
Evita (us snapdragon)
As for windows 8 drivers, I know they are available but not sure where to get them from mate, just search google
Click to expand...
Click to collapse
Thank you,
C:\Android-adb>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.36.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.27
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4078mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.924s
This is what I have... So I guess I cant get S-OFF then.
1) What custom ROM is the best battery lastingwise? Is there an ARHD for the One X? Sorry to bother so much, wish I had more time to read up on my own.
2) Not even sure if this phone is unlocked or not, is it hard to unlock it so that any SIM card is accepted? Thanks!

Ok, I've done some reading, and I found out ARHD exists for the One X. My cousin's phone is on 3.14 firmware and ARHD here http://forum.xda-developers.com/showthread.php?t=1562603 says it is on 4.18
How do I update to 4.18? Can I flash a firmware or is it OK if I update the phone from "Settings" before unlocking and rooting it?
I know that for the One M7, you need to update firmware first before installing the ROM.

If you are on the 3.14 official you do not necessarily need to update the firmware. You can flash that rom straight away

To SIM unlock first try a SIM from a different network carrier, if it asks for a code then you need an unlock code.
There are 2 options
1. Call the network that supplied the phone and see if they will give you the code at no cost to you.
2. Use an unlocking service on eBay, this is what I did because my provider T-Mobile UK (EE) wanted to charge me over £20, instead I got the code from eBay for £2.99, here's a link if your interested mate: http://pages.ebay.com/link/?nav=item.view&id=111262080291&alt=web
This is the seller I used and I got the code within 10 minutes and it worked perfectly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

-unlock the bootloader
-flash custom recovery
-flash the boot.img
-perform a full wipe
-Install the rom.zip
Done.....

Mr Hofs said:
-unlock the bootloader
-flash custom recovery
-flash the boot.img
-perform a full wipe
-Install the rom.zip
Done.....
Click to expand...
Click to collapse
Thank you, I know how to do all those things, but on ARHD page under the requirements it says:
---Proper HBOOT version for Jelly Bean based ROM - How To change Hboot
And it shows a link to a 22 minute video... is this required or can I just ignore it (I have HBOOT 1.36)
Thanks again!
EDIT: you say to flash boot.img then full wipe then install rom, but http://forum.xda-developers.com/showthread.php?t=2069904 says to flash rom first then flash boot img... is it the same?

Like i said ...

It doesn't matter if you flash the boot.img before or after mate, I always flash it first.

one m8 stuck in bootloader ( no recovery, no os and relocked )

hello everyone
i've got an international m8 stuck in bootloader: if i turn it on, it will start in bootloader mode; it doesn't start in recovery and OS is blank. i've tried to flash recovery or hboot but i couldn't because it is relocked and s-on .
moreover model id and serial number are currupted :
version: 0.5
version-bootloader: 3.18.0.0000
version-baseband: 1.19.21331147A1
version-cpld: None
version-microp: None
version-main:
version-misc: UNKNOWN SHIP S-ON
serialno: ¢v×KÖÃ/eg)╗©õ¶¨
imei: __________________
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: ☻◄
cidnum: HTC__203
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 5e4b24e4
hbootpreupdate: 11
gencheckpt: 0

Haven't seen this before. Did you try to do anything before this happened?

Try getting your bootloader unlocked and flashing a custom recovery. Or if you have a SD card, try placing a firmware inside to let the system install the firmware. I'm s-on so I know not much about s-off. Or you can always send it back to warranty stating that you have no idea what happen to your device

I had that happen to me when I relocked the boot loader your going to have to run the appropriate ruu on your pc with your phone plugged in and on the bootloader screen

redsocks95 said:
hello everyone
i've got an international m8 stuck in bootloader: if i turn it on, it will start in bootloader mode; it doesn't start in recovery and OS is blank. i've tried to flash recovery or hboot but i couldn't because it is relocked and s-on .
moreover model id and serial number are currupted :
version: 0.5
version-bootloader: 3.18.0.0000
version-baseband: 1.19.21331147A1
version-cpld: None
version-microp: None
version-main:
version-misc: UNKNOWN SHIP S-ON
serialno: ¢v×KÖÃ/eg)╗©õ¶¨
imei: __________________
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: ☻◄
cidnum: HTC__203
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 5e4b24e4
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Ok think i figured this out was in the same boat you need to :
1:Boot into your bootloader
2:click fastboot
3:goto computer download squabbis htc one toolkit 3.2.x
4:install drivers for htc if you havent already
5:click fastboot got to the flash section
6n your computer download newest custom recovery you want
7:locate file from flash section then select partition recovery should have your custom recovery back
8:install desired rom from sd card if no sd card can be viewed try mounting it if that doesnt work reboot into recovery and click fast boot go back to computer open cmd where from your abd folder is and type in "fastboot oem enableqxdm 0"
hope this helps please report back to let me know if it worked
CHEERS plz click thanks if this helps anyone else

i can't flash recovery because my bootloader is relocked ( if i try ., it'll say "FAILED (remote: signature verify fail)" )
i tried to unlock bootloader but htcdev give me an error ( Error Code: 150) :
<<We're sorry, but it appears your attempt to unlock the bootloader on this device has failed. This could be caused by several factors including simple errors in the entry of the unlock token, problems with your device, or a lack of manufacturer support for the unlocking process. Please see the specific error code listed below, and try again if necessary.
Error Code: 150.
Error Reason: Extract Token Information Fail>>

redsocks95 said:
i can't flash recovery because my bootloader is relocked ( if i try ., it'll say "FAILED (remote: signature verify fail)" )
i tried to unlock bootloader but htcdev give me an error ( Error Code: 150) :
<<We're sorry, but it appears your attempt to unlock the bootloader on this device has failed. This could be caused by several factors including simple errors in the entry of the unlock token, problems with your device, or a lack of manufacturer support for the unlocking process. Please see the specific error code listed below, and try again if necessary.
Error Code: 150.
Error Reason: Extract Token Information Fail>>
Click to expand...
Click to collapse
Try the token again. You have to copy and paste everything including the <<<<< >>>>> but none of the "bootloader" stuff on the side.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Make sure you don't have any "spaces" selected in it too.
Should be a problem with the copy/paste of the code, the reason says it all.

BerndM14 said:
Try the token again. You have to copy and paste everything including the <<<<< >>>>> but none of the "bootloader" stuff on the side.
Make sure you don't have any "spaces" selected in it too.
Should be a problem with the copy/paste of the code, the reason says it all.
Click to expand...
Click to collapse
i've tried several of times butg nothing , every time i get error 150

redsocks95 said:
i've tried several of times butg nothing , every time i get error 150
Click to expand...
Click to collapse
I know this is an old topic but for those experiencing the same problem, you need to go through the token request process via HTCDev all over AGAIN. The old token that you used to unlock is not valid after you relock as it has a different value.
Once you get the new token you can copy it to the fastboot folder and then in command prompt use the command fastboot flash unlocktoken Unlock_code.bin to unlock.
Hope this will be useful to someone in a similar dilema.

Htc one M8s cant boot

The device wont boot into recovery, normal os or anything besides the boot loader need help
been trying to solve this issue for a while. This is another device that was handed to me with a similar problem that some one used a all in one tool kit for it and root failed and then they tried to return to stock to try again but the device wont boot into anything besides boot loader. IF possible could u explain step to step what to do to fix it please to save my soul and time. IF u can thank u very much.
Bootloader:
*** Software status: Modified ***
*** RELOCKED ***
M8QL_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
[email protected]
OS-2.10.401.1
eMMC-boot 2048MB
Apr 15 2016,16:07:09.0
the fastboot getvar all gives:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT54GYS00917
(bootloader) imei: 358031060496828
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0b9a12e3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
Downloaded the zip for it :
]RUU[email protected]50408_15.00_016_F_release_450409_combined_signed.z ip

HyperV1per said:
Downloaded the zip for it :
]RUU[email protected]50408_15.00_016_F_release_450409_combined_signed.z ip
Click to expand...
Click to collapse
This RUU won't work. I already said in other thread - http://forum.xda-developers.com/htc...-relocking-t3525374/post70248407#post70248407
you need this one
0PKVIMG_M8_QL_UL_M60_SENSE70_HTC_Europe_2.10.401.1 _Radio_1.0.U20410.1 @ 60201_20.05_018_F_release_479349_combined_signed.z ip
To make thing easier - you can download this RUU here :
https://www.androidfilehost.com/?fid=24591023225176246
then follow this guide on how to install it with microsd method - http://forum.xda-developers.com/showpost.php?p=62590185&postcount=1
To summarize :
Rename the RUU.zip to 0PKVIMG.zip
Put it on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Relax .. let it finish its job
Once completed - press power to reboot
Done

ckpv5 said:
This RUU won't work. I already said in other thread - http://forum.xda-developers.com/htc...-relocking-t3525374/post70248407#post70248407
you need this one
0PKVIMG_M8_QL_UL_M60_SENSE70_HTC_Europe_2.10.401.1 _Radio_1.0.U20410.1 @ 60201_20.05_018_F_release_479349_combined_signed.z ip
To make thing easier - you can download this RUU here :
https://www.androidfilehost.com/?fid=24591023225176246
then follow this guide on how to install it with microsd method - http://forum.xda-developers.com/showpost.php?p=62590185&postcount=1
To summarize :
Rename the RUU.zip to 0PKVIMG.zip
Put it on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Relax .. let it finish its job
Once completed - press power to reboot
Done
Click to expand...
Click to collapse
Thanks man i was looking everywhere for RUU link.

ckpv5 said:
To make thing easier - you can download this RUU here :
https://www.androidfilehost.com/?fid=24591023225176246
then follow this guide on how to install it with microsd method - http://forum.xda-developers.com/showpost.php?p=62590185&postcount=1
To summarize :
Rename the RUU.zip to 0PKVIMG.zip
Put it on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Relax .. let it finish its job
Once completed - press power to reboot
Done
Click to expand...
Click to collapse
Ok, thanks for coming back to me. I have tried the steps you mention.
I have done that. Once I select hboot this is what I get:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am stumped. What should I try now?

You did extract out the RUU zip from the rar .. definitely, right ?
Make sure your windows extension is not hidden when you rename the RUU zip to 0PKVIMG.zip so it won't actually read 0PKVIMG.zip.zip
Read this - https://forum.xda-developers.com/htc-one-m8/one-m8s-general/bootloop-htc-m8s-t3518915

ckpv5 said:
You did extract out the RUU zip from the rar .. definitely, right ?
Make sure your windows extension is not hidden when you rename the RUU zip to 0PKVIMG.zip so it won't actually read 0PKVIMG.zip.zip
Read this - https://forum.xda-developers.com/htc-one-m8/one-m8s-general/bootloop-htc-m8s-t3518915
Click to expand...
Click to collapse
No, I didn't extract it, I renamed it as per the instructions.
Yeah I checked the file extension, that's not the issue.
I wonder if this is the correct RUU for my setup?

wageslave said:
No, I didn't extract it, I renamed it as per the instructions.
Yeah I checked the file extension, that's not the issue.
I wonder if this is the correct RUU for my setup?
Click to expand...
Click to collapse
If you open (not extract) the one you renamed, what file that you see inside the zip ?
I guess this is the problem .. you need to extract the RUU out from the RAR file. Inside RAR, there is a folder. Inside this folder there are 2 files, one is A_1st� Support.txt and the other one that you need
0PKVIMG_M[email protected]60201_20.05_018_F_release_479349_combined_signed .zip
and this is the one to be renamed to 0PKVIMG.zip

ckpv5 said:
If you open (not extract) the one you renamed, what file that you see inside the zip ?
I guess this is the problem .. you need to extract the RUU out from the RAR file. Inside RAR, there is a folder. Inside this folder there are 2 files, one is A_1st? Support.txt and the other one that you need
0PKVIMG_M[email protected]60201_20.05_018_F_release_479349_combined_signed .zip
and this is the one to be renamed to 0PKVIMG.zip
Click to expand...
Click to collapse
Awesome, that's worked. Thanks!

RUU 2.20
I need a Ruu for Version 2.20.
I bought a HTC ONE M8S on Ebay. I reboots always. In the Bootloader
Software Modif. S-on

Hello everybody,
i hope someone can help me here:
My One M8S does not start anymore.
There is always only the bootloader.
A factory reset brought no improvement.
I kept to the instructions.
Unfortunately always Comes:
Image update fail
If I would like to rename the zip in the lower folder zip, then always "data error" comes.
"Insert the last volume of the set and click ok."
Software Status: Modified
Locked
Security Warning
M8QL_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
[email protected]
OS-1.21.401.1
Feb 25 2016, 17:29:38.0
FASTBOOT AC

Need help with My M8

hi
i installed leneage OS on my device few months back then used it few days then left it in my drawer , a few days back when i started my phone i saw a vertical colored lines on screen and i can barley see what came to my mind is that a software issue so what did i do is went to recovery did a full wipe (system as well) and that is my mistake , screen became worse in i cant see any thing except lines still im able to boot into bootloader , fastboot etc..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader)
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 6(s)
My Device status now is Unlocked TWRP recovery and No OS
thanks in advance

Cutrus said:
hi
i installed leneage OS on my device few months back then used it few days then left it in my drawer , a few days back when i started my phone i saw a vertical colored lines on screen and i can barley see what came to my mind is that a software issue so what did i do is went to recovery did a full wipe (system as well) and that is my mistake , screen became worse in i cant see any thing except lines still im able to boot into bootloader , fastboot etc..
My Device status now is Unlocked TWRP recovery and No OS
thanks in advance
Click to expand...
Click to collapse
Please remove your imei and serialno
Do those lines appear in twrp menu?
Have you tried flashing a different rom?

Saleen28 said:
Please remove your imei and serialno
Do those lines appear in twrp menu?
Have you tried flashing a different rom?
Click to expand...
Click to collapse
Yes they are , i reflashed the os at the beginning same results

Saleen28 said:
Please remove your imei and serialno
Do those lines appear in twrp menu?
Have you tried flashing a different rom?
Click to expand...
Click to collapse
uploaded a picture

Seems like hardware issue imo.
Your M8 is blue - have you changed the unibody or it was just a blue model?
Also - was your drawer a dry place? Maybe some moisture somehow got into it.

Saleen28 said:
Seems like hardware issue imo.
Your M8 is blue - have you changed the unibody or it was just a blue model?
Also - was your drawer a dry place? Maybe some moisture somehow got into it.
Click to expand...
Click to collapse
Yes blue , I've store it in his original box in a dry place

I'd flash a ruu as a last line of defense if it's a software thing.
If that doesn't help then it's a hardware problem, probably the screen. If you're lucky then reconnecting the screen ribbon might fix it, if not - you need a screen replacement.

Saleen28 said:
I'd flash a ruu as a last line of defense if it's a software thing.
If that doesn't help then it's a hardware problem, probably the screen. If you're lucky then reconnecting the screen ribbon might fix it, if not - you need a screen replacement.
Click to expand...
Click to collapse
Tried to flash a RUU halted at this message when i flash the RUU
fail43 main version check fail
Didn't figure out how to pass it

Cutrus said:
Tried to flash a RUU halted at this message when i flash the RUU
fail43 main version check fail
Didn't figure out how to pass it
Click to expand...
Click to collapse
This error tells that you're trying to flash a ruu that is lower than your current firmware. Try this one - https://androidfilehost.com/?fid=24369303960687057
Also a short guide I've found, just in case
ckpv5 said:
For S-On
fastboot oem lock (to relock bootloader)
fastboot reboot-bootloader (reboot to bootloader after relock)
fastboot oem rebootRUU (put the device in RUU mode)
htc_fastboot flash zip RUU.zip (to install RUU)
Click to expand...
Click to collapse