Related
I dropped my white galaxy s2 yesterday and it has a semi steep dent on it. Luckily everything is working fine. Anyone know I can get a replacement of the aluminum bumper that surrounds the side of the phone? I've done a a few search and couldn't find it.
Hi Something,
Unfortunately a part like this is usually fused with the front housing assembly on the device. A quick google search yielded the following result...
globaldirectparts.com/Samsung-Galaxy-S-II-SGH-T989-Front-Housing-p/smsng6110920.htm
You'd have to replace the entire front housing assembly on the device...not the easiest part swap, but still entirely doable.
Hope this helps!
Cheers,
Nick
Spork McBork said:
Hi Something,
Unfortunately a part like this is usually fused with the front housing assembly on the device. A quick google search yielded the following result...
globaldirectparts.com/Samsung-Galaxy-S-II-SGH-T989-Front-Housing-p/smsng6110920.htm
You'd have to replace the entire front housing assembly on the device...not the easiest part swap, but still entirely doable.
Hope this helps!
Cheers,
Nick
Click to expand...
Click to collapse
If you do this, looks like you'll have a black T989
Get a case and cover it up, best and easiest option.
That really sucks. I dropped my also on wood floor and cracked the left corner.Great phone but too sensitive. I need a light but strong case.
BRODZ2020 said:
I need a light but strong case.
Click to expand...
Click to collapse
Any case that provides reasonable protection for a phone is not going to be 'light' or thin. There's a reason why they add bulk and it is to absorb the kinetic energy that would otherwise damage your phone.
Those guys (GlobalDirect) won't ship to an individual, they only deal with businesses.
SheCo said:
Those guys (GlobalDirect) won't ship to an individual, they only deal with businesses.
Click to expand...
Click to collapse
Did you try to enter your social for the business ID ?
I had a similar incident happen while out partying for few days straight. A rugged fall onto some ragged asphalt made for some bezel splitting/pitting. I called T-mobile because my phone was "acting weird" and they exchanged it for me no hassles.
I also scratched the hell out of the bumper with a 1 inch drop. I tried using my PHP from tmobile, I was going to use water damage as an excuse but they want to charge me $130 bucks just going to get a case
Is that actually aluminum I thought it was just aluminum colored, well if it is aluminum, you can always try a really, really fine sandpaper ex.1000,1500,2000 even 5000, I had a HTC Sensation (Made Chrome), and I dropped a few times, had chips and scratches which I fixed with sandpaper and 1000 to 2000+Blue Magic. Hope this can help but remember try at your own risk.
I looked into replacing this part when I dropped and dented my phone. Unfortunately, to replace it you have to replace the entire front half of the phone. And unfortunately, the screen is adhered in place. From what I found, you need to have the proper tools (uses heat, I believe) to release the screen, and then reapply it to the new housing. I cracked my OLED while attempting this. Luckily I was able to put it back together and get it replaced under the insurance. Bought myself a case immediately upon receiving the new phone.
Hi guys,
I have just broken my Dinc2's glass screen. The underlying LCD screen is still functional and the touch screen works. So, I am guessing that I only broke the glass on the top of the screen... I uploaded pics to make it clear.
The casing near the USB port got bent some time back when I went kayaking... And I think that is where the screen cracked significantly when I dropped the phone.
I can still use the touchscreen and there are no discoloration on the LCD. So, can you guys suggest to me what Screen replacement product I need to buy online and (preferably) give me a link for said product and a How to repair guide. Plus, is this process easy? As in if I spend a few hours carefully following the steps to repair, will I succeed?? Moreover, can I replace the metal casing as well?
Thanks for the help gang! I really need to get my phone back to 100% working condition as I don't have an upgrade available till April '13 and I have cancelled my phone's insurance recently!
EDIT: Does this product help? http://www.amazon.com/gp/product/B0057OO9OC/
http://www.repairsuniverse.com/htc-droid-incredible-2-screen-replacements-repair-parts.html
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Truckin'Ain't4Sissies said:
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Click to expand...
Click to collapse
So I have dust under my screen even though my phone is completely original and never been dropped. Do you think it's worth taking apart, cleaning out, and replacing the adhesive? How long do you think it would take, and what is the likelihood of doing more damage to the phone?
Truckin'Ain't4Sissies said:
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Click to expand...
Click to collapse
I bought the following on amazon:
http://www.amazon.com/gp/product/B005GIUHDQ
http://www.amazon.com/gp/product/B0057OO9OC
http://www.amazon.com/gp/product/B002EXHR1Q
I should have probably waited for more replies, like yours, here to get a better product link. Anyway, I guess I bought all the needed parts. I hope I get good quality material and I can get going with the repair... Do you think that they are good? The digitizer and tools didn't ship yet, so I can try and cancel and buy the one from ebay...
I actually just finished doing this a few hours ago. It does take some time to do it but if you have patience you can do it
You have to remove the LCD to remove the digitizer, so you will have all the parts out of the body of the phone. It is easier if you replace the body because it comes with new adhesive already perfectly cut and installed. If you reuse the old one you will have to scrape all the old adhesive off, then cut new adhesive. They are also available in red/silver/black so you can change colors.
Dermen said:
I actually just finished doing this a few hours ago. It does take some time to do it but if you have patience you can do it
You have to remove the LCD to remove the digitizer, so you will have all the parts out of the body of the phone. It is easier if you replace the body because it comes with new adhesive already perfectly cut and installed. If you reuse the old one you will have to scrape all the old adhesive off, then cut new adhesive. They are also available in red/silver/black so you can change colors.
Click to expand...
Click to collapse
When you say replacing the body, are you referring to the front housing/bezel? That is this: http://www.repairsuniverse.com/htc-droid-incredible-2-front-housing-bezel-replacement.html
If so, where did you buy it, as I want a reliable and reasonably priced product online. Thanks a lot for the help, btw!
litetaker said:
When you say replacing the body, are you referring to the front housing/bezel? That is this: http://www.repairsuniverse.com/htc-droid-incredible-2-front-housing-bezel-replacement.html
If so, where did you buy it, as I want a reliable and reasonably priced product online. Thanks a lot for the help, btw!
Click to expand...
Click to collapse
That is what I was referring to as the body, since all the parts attach to it. I actually got an entire new housing, came with the bezel, the middle part, and a new battery cover since my battery cover was beat up and I was changing colors. The middle part I didn't need but it was cheaper to buy all 3 parts than just 2.
I got it on ebay. The Incredible 2 and the Incredible S housing parts are interchangeable. I ended up getting S parts because they were cheaper. Most of the ebay sellers are in China so shipping takes 1-2 weeks depending on the seller. Repairsuniverse is good if you want it fast, I ordered from them once and got the part in 2 days.
Parts arrived. Links to tutorials PLEASE!
Dermen said:
That is what I was referring to as the body, since all the parts attach to it. I actually got an entire new housing, came with the bezel, the middle part, and a new battery cover since my battery cover was beat up and I was changing colors. The middle part I didn't need but it was cheaper to buy all 3 parts than just 2.
I got it on ebay. The Incredible 2 and the Incredible S housing parts are interchangeable. I ended up getting S parts because they were cheaper. Most of the ebay sellers are in China so shipping takes 1-2 weeks depending on the seller. Repairsuniverse is good if you want it fast, I ordered from them once and got the part in 2 days.
Click to expand...
Click to collapse
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
litetaker said:
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
Click to expand...
Click to collapse
1. Take it apart.
2. Put it together with new parts.
3. ???
4. Profit.
prototype7 said:
1. Take it apart.
2. Put it together with new parts.
3. ???
4. Profit.
Click to expand...
Click to collapse
Thanks, captain obvious!
I wanted to know if there is a detailed how to. Anyway, managed to take it apart. All guides end at taking it apart and say, "well, now you know how to dissemble it, just go in reverse and assemble it. Well. I wish they don't do that and show me through the reverse just to avoid mistakes. I remember having to redo IKEA furniture due to missing a few parts. Don't wanna do this messy procedure and realize I forgot a button or worst still putting the screen on!
Anyway, I am a grad student with a bachelors in Engineering... I should be ashamed if I can't do this! :silly:
repairsuniverse has a guide on youtube for replacing the digitizer. I found it easy to follow. Only difference is when you put it back together put the parts in the new body. You will also have to pull the speaker out of the old body and put it in the new. It is held in by glue, heat it with a hairdryer/heatgun and it comes out pretty easily. You might need to use some new adhesive on the speaker, I was able to pull the old adhesive out of the body in one piece using a hairdryer and some tweezers.
Dermen said:
repairsuniverse has a guide on youtube for replacing the digitizer. I found it easy to follow. Only difference is when you put it back together put the parts in the new body. You will also have to pull the speaker out of the old body and put it in the new. It is held in by glue, heat it with a hairdryer/heatgun and it comes out pretty easily. You might need to use some new adhesive on the speaker, I was able to pull the old adhesive out of the body in one piece using a hairdryer and some tweezers.
Click to expand...
Click to collapse
I am 100% done with the repair. But there are a few issues. The Vibrator motor seems to be not working. Then, the Digitizer I bought doesn't have a hole for the front facing camera! That is not a major setback as I rarely use it and I have a tablet and a PC to skype chat with... But it is sad that a feature is missing.
The big issue is the vibrator not working. I didn't mangle it and put it back in place as I am supposed to. Finally, I have 1 or 2 small dust particles under the screen and that is ok. I couldn't remove all the dust and it is a miracle I managed to get it that clean. Finally I seem to have a slight green tint/screen bleed at top left corner. I didn't have that before and I didn't distort the LCD while replacing. Is it due to a smudge on the LCD there? I suppose it is a minor issue and not something that will amplify as I have a Transformer prime that has screen bleeds and it is apparently because the screws are too tight.. So may be I tightened something too much? Anyway, if it doesn't deteriorate I am ok, as it is a very, very minor problem.
So, bottom line: Main problems > (1) No FFC (due to improper digitizer) -> I don't intend to fix it. (2) Vibrator motor not working.
Can someone help me with 2?
I fricking fixed it! I have WORK to do and I spent about 4 hrs fixing my phone!!! I'm kinda screwed for tomorrow! At least now my phone works...
That is odd it didn't have a spot for the front camera. I replaced my digitizer and it has a clear spot for it but it is not even close to centered. It actually looks like it would obstruct the camera but it doesn't. If you take it apart again for some reason you can scrape the black off the back so it is clear. However, it is very hard to do that and make it look decent.
Getting it perfect with no dust between the lcd and digitizer is very very hard to do. The first phone I did I actually took it apart again because there not only was dust but smudges on the other side of the digitizer. As for the bleeding I wouldn't think you could cause it from pressure in the inc2 because the lcd and digitizer are just held on the front by adhesive. The LCD has adhesive around the entire edge of it, I don't know if that also blocks light from the edges but if it does and there is a little bit missing maybe it is the cause.
Dermen said:
That is odd it didn't have a spot for the front camera. I replaced my digitizer and it has a clear spot for it but it is not even close to centered. It actually looks like it would obstruct the camera but it doesn't. If you take it apart again for some reason you can scrape the black off the back so it is clear. However, it is very hard to do that and make it look decent.
Getting it perfect with no dust between the lcd and digitizer is very very hard to do. The first phone I did I actually took it apart again because there not only was dust but smudges on the other side of the digitizer. As for the bleeding I wouldn't think you could cause it from pressure in the inc2 because the lcd and digitizer are just held on the front by adhesive. The LCD has adhesive around the entire edge of it, I don't know if that also blocks light from the edges but if it does and there is a little bit missing maybe it is the cause.
Click to expand...
Click to collapse
The following are the images of my fixed and "pimped" Dinc2.
https://www.dropbox.com/s/beop9oqvn6qo9p5/2012-09-25 00.23.03.jpg
https://www.dropbox.com/s/qh62damm82z0qmu/2012-09-25 00.22.32.jpg
Is the two tone color combination looking sweet, or should I change the back to red as well? I have a spare black back cover. If anyone has a spare red back cover, I can trade!
Plus, the "smudge/screen bleed" at the top left edge is seen in this pic:
https://www.dropbox.com/s/illeve11tomyrtw/2012-09-25 00.54.23.jpg (The black spot on the middle of the left side is a dust spec!)
Close up: https://www.dropbox.com/s/9ys4r2e6xmxfhnh/2012-09-25 00.54.48.jpg
Is the smudge bad? I think it is just a smudge on the LCD and not a damage to the LCD right? In that case, I am cool, as I most likely will cause other smudges if I attempt to redo it anyway. Plus, I am kinda bummed out about the lack of FFC, but I hardly use it and the whole process of removing the screen is SOOO tedious (and I don't have a heat gun, so had to put my phone a feet above a gas burner! ) and it was so painful and stomach wrenching to safely remove the LCD/digitizer that I don't wish to do it again to repair the FFC...
So, what do ya say?
I think the two tone looks good since the red phones have all black accents. I thought it was weird that the speaker on the red phone is silver, while all the other accents are black.
There seems to be a problem with the adhesive. The digitizer is raised by about 1 millimeter at the top while it is attached better at the bottom. I think it is because I had an additional horizontal strip of adhesive at the bottom to attach the digitizer to both the LCD and the buttons firmly while I didn't put such a horizontal strip at the top as I didn't see one when I dissembled it. If I put pressure on the digitizer for a while, it sets back in place for about half a day. Is this a serious problem? I don't feel like dissembling again.
litetaker said:
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
Click to expand...
Click to collapse
I just broke my screen and im looking to go the same route. This is a good phone to have as a back up after i get my upgrade and i dont want to get rid of it.
Anyway, did you need all those parts to successfully change your screen? I thought if you bought a new housing you would not need the adhesive tape?
I have had my Note 2 for almost 3 weeks now. A couple of days ago I was putting on the new screen and back protectors I got. You need to take the battery cover over to install..
So after finishing up, I snap the battery cover on and WTF?? The screen is cracked in the upper right corner!!?? Has anyone else run into this?
We took it to US Cellular and they say its not a manufacturer defect and will cost $100 to have it fixed.
This is BS!! I did not drop it, squeeze it hard or anything. I would be the first to admit if I had done anything wrong!
I have not contacted Samsung yet, I am trying to get more info if any others have had this problem...
Wow, you joined in 2009 and this is your first post!
On topic. Sorry that has happened to you. I can relate to the feeling of something deffective just few days after you've purchased it. I have never seen that happening to any of my devices or those devices of my friends' and relatives'...
Really weird. But one fear I have is to have the phone in my pocket and bending down to do something tightening the fabric on the pants around the upper leg area enough to bend the screen and shatter it...
Ron
IMPORTMAN said:
I have had my Note 2 for almost 3 weeks now. A couple of days ago I was putting on the new screen and back protectors I got. You need to take the battery cover over to install..
So after finishing up, I snap the battery cover on and WTF?? The screen is cracked in the upper right corner!!?? Has anyone else run into this?
We took it to US Cellular and they say its not a manufacturer defect and will cost $100 to have it fixed.
This is BS!! I did not drop it, squeeze it hard or anything. I would be the first to admit if I had done anything wrong!
I have not contacted Samsung yet, I am trying to get more info if any others have had this problem...
Click to expand...
Click to collapse
Seriously... only a hundred dollars to repair?... can you please tell me where/who is doing that?. I dropped my phone and had a much more catastrophic screen shatter, everywhere I looked, it was going to be in the 270/300 dollar region for a repair - 100$ would be a really good price for repair.
IMPORTMAN said:
I have had my Note 2 for almost 3 weeks now. A couple of days ago I was putting on the new screen and back protectors I got. You need to take the battery cover over to install..
So after finishing up, I snap the battery cover on and WTF?? The screen is cracked in the upper right corner!!?? Has anyone else run into this?
We took it to US Cellular and they say its not a manufacturer defect and will cost $100 to have it fixed.
This is BS!! I did not drop it, squeeze it hard or anything. I would be the first to admit if I had done anything wrong!
I have not contacted Samsung yet, I am trying to get more info if any others have had this problem...
Click to expand...
Click to collapse
do you have a picture of the damaged glass?
why take the extra step to take off the battery cover to install screen protector? used to have el-cheapo back covers, and currently using capdase bodifender and there was no need to take out the battery cover. plus the itsy bitsy plastic cover and its tips should not do damage on the glass screen unless it's defective to begin with since you said you didn't squeeze it hard when putting the covers back on.
RizSher said:
Seriously... only a hundred dollars to repair?... can you please tell me where/who is doing that?. I dropped my phone and had a much more catastrophic screen shatter, everywhere I looked, it was going to be in the 270/300 dollar region for a repair - 100$ would be a really good price for repair.
Click to expand...
Click to collapse
I have insurance on the phone through US Cellular...thats what they quoted me.
But still its the principle, I feel its a manufacturer defect or it was stressed to begin with since the glass was installed..
badbadtz.carlo said:
do you have a picture of the damaged glass?
why take the extra step to take off the battery cover to install screen protector? used to have el-cheapo back covers, and currently using capdase bodifender and there was no need to take out the battery cover. plus the itsy bitsy plastic cover and its tips should not do damage on the glass screen unless it's defective to begin with since you said you didn't squeeze it hard when putting the covers back on.
Click to expand...
Click to collapse
You have to take the battery out since you need to use a bit of soapy water...they were cheap! $4 each on amazon with free shipping! :good
No pictures yet..:and no I didn't squeeze it when putting covers on..I did my GF phone the same way and no problems with hers. Definately a manufacturer defect. I will go in there Saturday when its very busy and raise a stink!!
Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS. AOK now. afterwards, I tried to pry apart the digitizer glass. In my Note II it is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer on my version of the Note II
Why suddenly sooooooo....many thread about glass break in just differrent few minute of post?? Lol :banghead:
Sent from my GT-N7100 using xda app-developers app
update!!
Well after many months of screwing around and taking to facebook and twitter about their poor quality and poor customer service, the "office of the president" of Samsung stepped up to the plate and fixed my Note 2 free of charge!!
I had my note 4 screen assembly replaced after I dropped it. However, the screen is no longer completely secured in the phone. The screen pushes into the frame if I place pressure on the screen and I can get my finger under the edge of the assembly on the top left corner. The home button is also loose, but gets tight like it should be if I hold the screen down. This is an annoying issue and I've recently noticed that dust is getting inside the phone, which I'm worried will cause hardware damage. The front camera is already blurry and cloudy from dust getting inside. If I take the screen off and apply new adhesive, will the screen sit in the frame like it should or is it impossible to restore the feel on a phone with a screen replacement to what it was like from the factory? I hope you hear from you guys, and thanks in advance.
I would take it to a local Sprint service and repair location (or where ever you got your screen replacement). They should be able to reseat your screen in the housing and clean your camera right up. In terms of applying new adhesive, you shouldn't really need to. The 15 some odd screws on the back should take care of it. Source: I'm a S&R Technician
Thanks for the help! My problem is that I'm hesitant to return to the shop where I got the screen replaced, because when they originally replaced it I was unsatisfied with how it fit so I went back and had them do some more work. It was alright at first, but it began to get steadily worse in a fairly short amount of time. So I'm a little cautious of going back there to ask them to do more work. If I asked them to reseat the screen assembly, do you think it would help? Also, is it possible to return to an almost-factory feel with a replaced screen or do I need to accept that the assembly will never be quite as tight as it originally was?
Similar issue
I had a similar issue and I took it back to sprint which they fixed regardless of my device being rooted.
Did you have the screen replaced before you took it to sprint, or was the screen loose from the factory?
you can find the replace guide at ifixit, I don't leave the link,you can google it.
If you want to buy original LCD screen ,you can go to the HCQS.
Has anyone replaced your battery on tab s2 where you source it?
You can find New Samsung ones on ebay for around 10 English pounds.
Easy job to replace too. Takes around 5 to 10 minutes.
Just loosen the back with a sucker then go round edge with Guitar pick.
Couldn't get back off fully from the Camera, but you can easily get out the battery by flexing the back open gently.
Battery stuck down with a few spots of glue but easily popped out with the guitar pick.
Back popped right back in.... Bit of play on the back so not as water resistant as before. No issue if you use in a case for me.
Beats the 30% wear on the battery after just 14 months.
Forgot to mention, I have the 8 inch version SM-713
I looked around ebay and amazon. Those Chinese man probably selling used ones pretending to be new. Is there any reliable source for really new ones? Thx.
hi anyone here?
optionalmgrr.la said:
hi anyone here?
Click to expand...
Click to collapse
Try Amazon. I just replaced the battery in my T713
I’ve replaced mine twice and sent back three or four batteries.
As far as I can tell, it next to impossible to get a good battery and original is completely unattainable.
So far I have never found a decent battery.
I've asked the local Samsung support a few months ago, it cost, in usd, ~$50, so I sold the tablet instead
Anybody who has done the replacement have any issue getting the back cover back on? I broke a couple of the clips off and can't find a replacement back. I'm hesitant to glue the back together in case this battery takes a dump. I am using double sided tape that came with a screen replacement kit but it is still pretty easy to peel the back off.
hecksagon said:
Anybody who has done the replacement have any issue getting the back cover back on? I broke a couple of the clips off and can't find a replacement back. I'm hesitant to glue the back together in case this battery takes a dump. I am using double sided tape that came with a screen replacement kit but it is still pretty easy to peel the back off.
Click to expand...
Click to collapse
Is this about the 8" version? The 9.7" version needs to have the screen removed, mid-plate unfastened (16 tiny philips screws, including 2 easy to miss ones w flat-black heads).
I've just replaced my battery, the one that was in there was an OEM Samsung but my screen was glued on w black 4mm tape that covered one of the mid-plate screws, so I dunno if this was the original battery.
I replaced mine because I was getting 'storms' of reboots, thought the battery might be the issue (FWIW, still getting the same reboots post-battery-replacement.)
FWIW, I already had a killer suction cup on hand (from a RAM mount setup), these thin pry/cut tools https://www.fixez.com/categories/repair-tools/pry-tools/qianli-stainless-steel-ultrathin-pry-tool made it easy to get the screen off.
I also had an industrial quality heat gun to soften the glue, but that turned out to be unnecessary (you might need one if you start with your tablet cold)
I just changed the Battery on my T813.
It started to do some odd things, like rebooting even though there was plenty of charge or simply discharging to flat from 100% in a few hours without being used.
I got this from amazon https://www.amazon.co.uk/gp/product/B07KSZCDCB/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
it was a breeze to fit, back cover came of really easily after the initial poke around at one of the top corners (camera end)
No screws to undo, no adhesive, once that corner popped up (using the knife seen in pic 1) it was very easy
https://photos.app.goo.gl/H2NJKhsb3t7Supz7A
https://photos.app.goo.gl/8StvHg6WWAJUKEFF9
https://photos.app.goo.gl/7SKB88y8QPBGWtrF8
undo the connector cable, undo the 4 screws, remove
replacement is the reverse, and pop the case back on
Holds charge better, doesn't run out while using and as yet, no random reboots
In 2023 is it possible to buy brand new battery for SM T813?