I really want to use Android Pay but I'm not able to unless I have a locked bootloader. But then I will also lose root in the process. Anytime I reflash TWRP then lock the bootloader, it will just bootloop. Can someone help me please?
To use android pay you can flash magisk. AP should works fine with unlocked bootloader and root.
Wuzimu said:
To use android pay you can flash magisk. AP should works fine with unlocked bootloader and root.
Click to expand...
Click to collapse
How does that work though? Does it trick AP into thinking that the bootloader is locked or...
I can't check if Android Pay works because my country does not support it, but it should work because my device passes SafetyNet with unlocked bootloader.
First you need an unrooted rom with franco kernel, because franco kernel hides the unlocked bootloader from SafetyNet.
2. Install Rootswitch and reboot into TWRP.
3. Install SuperSU in systemless mode.
4. Reboot into Android and disable root in the Rootswitch App.
5. Android Pay should work now.
vipelp said:
I can't check if Android Pay works because my country does not support it, but it should work because my device passes SafetyNet with unlocked bootloader.
First you need an unrooted rom with franco kernel, because franco kernel hides the unlocked bootloader from SafetyNet.
2. Install Rootswitch and reboot into TWRP.
3. Install SuperSU in systemless mode.
4. Reboot into Android and disable root in the Rootswitch App.
5. Android Pay should work now.
Click to expand...
Click to collapse
I still get the "cant be used on this device error" even after following these instructions. I'm starting to wonder if root is even worth it.
Just got a 10 Factory Unlocked. I do need to root for Xprivacy and AdAway, etc. and of course, to make a nandroid. I suppose I could use ADB for such a thing, but TWRP surely does make life easier.
Since this is the first phone I've ever had that was already unlocked, I'm not quite sure where to start with rooting. I'm a little concerned because I'm seeing posts discussing how the radio might go wonky. Not ready to flash a custom ROM yet, I just want to dip my toe in the water for now.
I'd be grateful if someone could point the way.
BTW, the faceplate on my 10 is white, I was expecting black based on all the photos I've seen. Is this because I got the Factory Unlocked edition?
Thanks in advance!
is it on nougat or still marshmallow? i think nougat right? Xposed won't work on nougat anyway and you don't need to worry about the radio. if it's unlocked already and want to just root and you need to pass safetynet, get magisk v12. first you need to flash twrp and then flash the magisk zip to get root and be able to pass safetynet, be sure to not flash anything which modifies directly the system, otherwise no stock OTA and some apps won't work even if you use magisk hide
DeeZZ_NuuZZ said:
is it on nougat or still marshmallow? i think nougat right? Xposed won't work on nougat anyway and you don't need to worry about the radio, just unlock bootloader using htcdev.com
then flash a latest twrp and install a custom rom, but check first which main version is installed
Click to expand...
Click to collapse
Haven't even turned the phone on yet - letting her charge to 100% before I do anything. I'm confused - why would I need to unlock the bootloader if I already have an unlocked phone? Or by 'Factory Unlocked' do they mean SIM unlocked, versus bootloader unlocked?
BillTheCat said:
Haven't even turned the phone on yet - letting her charge to 100% before I do anything. I'm confused - why would I need to unlock the bootloader if I already have an unlocked phone? Or by 'Factory Unlocked' do they mean SIM unlocked, versus bootloader unlocked?
Click to expand...
Click to collapse
yea sorry, i've read way too fast and noticed it later, check my post now
DeeZZ_NuuZZ said:
if it's unlocked already and want to just root and you need to pass safetynet, get magisk v12. first you need to flash twrp and then flash the magisk zip to get root and be able to pass safetynet, be sure to not flash anything which modifies directly the system, otherwise no stock OTA and some apps won't work even if you use magisk hide
Click to expand...
Click to collapse
Not familiar with 'safetynet', and yes - I do need Xposed therefore it will modify the /system partition so far as I understand.
In any event, it sounds like the starting point is TWRP for anything to do with root, correct?
BillTheCat said:
Not familiar with 'safetynet', and yes - I do need Xposed therefore it will modify the /system partition so far as I understand.
In any event, it sounds like the starting point is TWRP for anything to do with root, correct?
Click to expand...
Click to collapse
yes you need twrp, without it no root... the thing is there is no Xposed for nougat and I think your phone came with android 7/ nougat right? if yes, forget Xposed. but you can use apps like adaway with magisk too.
So that'S why you should search for the Magisk thread and read everything about it, before you proceed
DeeZZ_NuuZZ said:
I think your phone came with android 7/ nougat right?
Click to expand...
Click to collapse
No, the HTC 10 shipped with MM. I guess I'll have to fire her up and see where I'm at.
So, assuming that I'm on MM, then it's just TWRP, flash SuperSU from recovery, install Xposed and I'm off and running - nothing extra, correct?
How would I make a Nandroid of the current factory ROM (all partitions - not file based) using ADB just in case?
BillTheCat said:
No, the HTC 10 shipped with MM. I guess I'll have to fire her up and see where I'm at.
So, assuming that I'm on MM, then it's just TWRP, flash SuperSU from recovery, install Xposed and I'm off and running - nothing extra, correct?
How would I make a Nandroid of the current factory ROM (all partitions - not file based) using ADB just in case?
Click to expand...
Click to collapse
yea if MM then it's that easy.
full stock nandroid can be done in twrp, there you can backup system, data, boot and recovery
also the system image, but don't know if you need that, but you can try to backup it too, be sure to have enough space
I got my unit one year ago, now I want root, I got nougat us unlocked and I want stock ROM, how can I do?
Enviado do meu HTC 10 através de Tapatalk
symy said:
I got my unit one year ago, now I want root, I got nougat us unlocked and I want stock ROM, how can I do?
Enviado do meu HTC 10 através de Tapatalk
Click to expand...
Click to collapse
flash magisk v12 then you have root and also can use android pay and other apps which needs passed safetynet
if you don't mind safetynet, you can also use systemless supersu
To the OP, surely factory unlocked indicates unlocked to all networks rather than bootloader unlocked ? Check this first to save some hassle. If the bootloader isn't unlocked yet, you could consider sunshine s off , it will cost you but on mm firmware you can s off and stay locked which can be an advantage. Worth checking bootloader status first though
DeeZZ_NuuZZ said:
flash magisk v12 then you have root and also can use android pay and other apps which needs passed safetynet
if you don't mind safetynet, you can also use systemless supersu
Click to expand...
Click to collapse
Can you tell me the great advantages of doing root, I do not want to lose the updates via ota
Enviado do meu HTC 10 através de Tapatalk
Confirmed - the 10 shipped with MM, so I'm in good shape. Flashing TWRP now. Thanks!
timbohobbs said:
To the OP, surely factory unlocked indicates unlocked to all networks rather than bootloader unlocked ? Check this first to save some hassle. If the bootloader isn't unlocked yet, you could consider sunshine s off , it will cost you but on mm firmware you can s off and stay locked which can be an advantage. Worth checking bootloader status first though
Click to expand...
Click to collapse
Yeah, just crashed into that wall. Almost gave myself a soft brick.
So, sunshine it is. Did that with my M9 and it worked out great. Thanks.
BillTheCat said:
Confirmed - the 10 shipped with MM, so I'm in good shape. Flashing TWRP now. Thanks!
Click to expand...
Click to collapse
What exactly do you need xposed for? It won't work once you updated to Nougat. And Nougat is much better tan Marshmallow at least as far as I'm concerned. All I need I've been able to find on custom ROMs and or by additional root Apps.
Sent from my htc_pmeuhl using XDA Labs
BillTheCat said:
Yeah, just crashed into that wall. Almost gave myself a soft brick.
So, sunshine it is. Did that with my M9 and it worked out great. Thanks.
Click to expand...
Click to collapse
Probably worth updating via ota after sunshine to nougat, not before. You can stay locked and s off then. After ota you can root as usual
timbohobbs said:
Probably worth updating via ota after sunshine to nougat, not before. You can stay locked and s off then. After ota you can root as usual
Click to expand...
Click to collapse
Can't go Nougat until Xposed is up and running.
So far:
Unlocked bootloader and went S-off via Sunshine
Installed TWRP
Made the error of allowing modification before taking a backup - not sure if I'm hosed.
Flashed SuperSU SR3 following Chainfire's instructions to send command via ADB
Flashed Xposed
Next: TiBu and restoring apps.
5m4r7ph0n36uru said:
What exactly do you need xposed for? It won't work once you updated to Nougat. And Nougat is much better tan Marshmallow at least as far as I'm concerned. All I need I've been able to find on custom ROMs and or by additional root Apps.
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
Xprivacy.
BillTheCat said:
Can't go Nougat until Xposed is up and running.
So far:
Unlocked bootloader and went S-off via Sunshine
Installed TWRP
Made the error of allowing modification before taking a backup - not sure if I'm hosed.
Flashed SuperSU SR3 following Chainfire's instructions to send command via ADB
Flashed Xposed
Next: TiBu and restoring apps.
Click to expand...
Click to collapse
You won't ( probably ) be able to do further ota in the future with your modified backup as you're probably aware. But don't worry too much, it's likely the firmware you're after will be available elsewhere
timbohobbs said:
You won't ( probably ) be able to do further ota in the future with your modified backup as you're probably aware. But don't worry too much, it's likely the firmware you're after will be available elsewhere
Click to expand...
Click to collapse
No big deal. I'm not ready for Nougat until Xposed is running. However, HTC has an RUU available already, so we're good to go.
http://www.htc.com/us/support/htc-10/news/
And of course, if I get bored, there are any number of custom ROMs available. I was running Maximus on my M9, I'd probably go that route again.
Some work with root. what about the 1+5T?
Im using tez,phone pay rooted with magisk.
Sent from my ONEPLUS A5010 using Tapatalk
Dunno if this is the same on 4.7.6 but running the Open Beta 2 and it works when rooted with Magisk and, but not when I have no root. So I guess it's detecting the bootloader status and thus, magisk will work.
I'm using it right now with magsik 15.3. If u unlock the boot loader u will never pass safety net which is requires to use these applications. But if u flash magisk it will pass safety net and u will be able to use it. Super su won't work
Jamie_oppo said:
I'm using it right now with magsik 15.3. If u unlock the boot loader u will never pass safety net which is requires to use these applications. But if u flash magisk it will pass safety net and u will be able to use it. Super su won't work
Click to expand...
Click to collapse
Just so OP doesn't get the wrong idea: You have to unlock the bootloader for any root method. And once you root, you should never ever re-lock the bootloader (unless you flash completely back to stock).
Magisk root method will allow cloaking both the bootloader status and root so that Android Pay works perfectly. I've never had an issue.
Yea I'll echo what's been said. Android pay has worked on my op3 and now my 5t rooted, with magisk hide.
I am on 8.1.0 with magisk.. I tried hiding root but says I am rooted or have a unlocked boot loader so Google pay won't work. How can I get Google pay to work being rooted unlocked BL? will a aftermarket kernel fix this ?
jordy787 said:
I am on 8.1.0 with magisk.. I tried hiding root but says I am rooted or have a unlocked boot loader so Google pay won't work. How can I get Google pay to work being rooted unlocked BL? will a aftermarket kernel fix this ?
Click to expand...
Click to collapse
Gotta be something going on besides just rooted as many of us have no issues.
jordy787 said:
I am on 8.1.0 with magisk.. I tried hiding root but says I am rooted or have a unlocked boot loader so Google pay won't work. How can I get Google pay to work being rooted unlocked BL? will a aftermarket kernel fix this ?
Click to expand...
Click to collapse
Did you select Hiding in magisk manager?
ram4ufriends said:
Did you select Hiding in magisk manager?
Click to expand...
Click to collapse
Yeah I tried selecting it. It says "This app uses safety net which is handled by magisk by default. I'm using stock boot img that I patched. Will a custom kernel do anything with spoofing the security?
I'm stock, rooted and set Gpay up this afternoon...
What version of Magisk you running. You installed the zip through twrp and the apk in Android...?
I have a LG G4 since almost the release of it. I had it rooted and with an unlocked bootloader since now. I decided to use it as my daily though to pay with it using Google Pay. So I re-flashed the stock v29a zip provided by LG and did the "fastboot oem lock" command. The bootloader locked, the rom is fully stock now without any modification. Why Google pay still says that the phone is altered and after checking Safetynet with an app on play store, fails? Also On Play Store the phone appears Uncertified... What is the problem?
ntelas said:
I have a LG G4 since almost the release of it. I had it rooted and with an unlocked bootloader since now. I decided to use it as my daily though to pay with it using Google Pay. So I re-flashed the stock v29a zip provided by LG and did the "fastboot oem lock" command. The bootloader locked, the rom is fully stock now without any modification. Why Google pay still says that the phone is altered and after checking Safetynet with an app on play store, fails? Also On Play Store the phone appears Uncertified... What is the problem?
Click to expand...
Click to collapse
Just an idea, take a look at your build.prop and see if anything looks off. Maybe you need to format some partitions before flashing the stock zip?
Cheers!
Thanks for the reply. I think the zip is flashing all the partitions.I checked for TWRP and did a factory reset after the flash to make sure it's as stock as it can get. Now for the build.prop I also think that it needs root to check and edit it right? If not what sould I look for?
ntelas said:
Thanks for the reply. I think the zip is flashing all the partitions.I checked for TWRP and did a factory reset after the flash to make sure it's as stock as it can get. Now for the build.prop I also think that it needs root to check and edit it right? If not what sould I look for?
Click to expand...
Click to collapse
I think that certain partitions need to be formatted you might want to search about that. I think TWRP can access the build.prop but not sure. I suggested checking build.prop because it will show different models, builds and basically would be an easy way to see if you are truly back to stock.
Good luck!
Thanks! I would have to install TWRP again maybe ?
ntelas said:
Thanks! I would have to install TWRP again maybe
Click to expand...
Click to collapse
Didi you Unroot before Flashing Stock?
Maybe some remants in Some Partitions are causing you trouble.
uweork said:
Didi you Unroot before Flashing Stock?
Maybe some remants in Some Partitions are causing you trouble.
Click to expand...
Click to collapse
I flashed stock coming from a RR rom with Magisk. Believe me if I had locked bootloader with a rooted rom now I wouldn't have my phone alive
ntelas said:
I flashed stock coming from a RR rom with Magisk. Believe me if I had locked bootloader with a rooted rom now I wouldn't have my phone alive
Click to expand...
Click to collapse
Then You didn´t read Properly.
I didn´t mean Root itself more Remnant parts of Root, that cause ur Saftynet fail.
on Samsung S2 once i thought so too, but banking app said no no no...
Only an Option
a user from this forum said that you need to take the line "ro.build.firgenprint=..." of the any MM/LP build.prop and insert it into the N build.prop (including reboot btw) and try again if google pay works for you...
I don't know if it works, I don't tried it, but you say us.