Is there any flashable zip of v4a for the pixel xl yet? I tried following a guide for Android nougat v4a installation and the app didn't install after flashing. Is there any way to install v4a without running a custom ROM?
AndroidMercury said:
Is there any flashable zip of v4a for the pixel xl yet? I tried following a guide for Android nougat v4a installation and the app didn't install after flashing. Is there any way to install v4a without running a custom ROM?
Click to expand...
Click to collapse
Go HERE and install the audio mod.
airmaxx23 said:
Go HERE and install the audio mod.
Click to expand...
Click to collapse
Thanks. For some reason I was thinking this was a full custom ROM.
Related
Hi, I have a problem with Viper4Android. It doesn't want to to install.
What i've done/tried:
- Phone is rooted
- Running CM13
- ElementalX
- SELinux set to Permissive on every boot (SuperSU)
- Tried installing driver through app and zip (flash)
- I have deleted /system/vendor/etc/audio_settings.conf
What should I do/What did I do wrong?
Greetings ErixGamer
Install aris and extremebeats...
It install Viper
manfio said:
Install aris and extremebeats...
It install Viper
Click to expand...
Click to collapse
do you have a link for those?
AllusionPDX said:
do you have a link for those?
Click to expand...
Click to collapse
Install first aris and then extremebeats
Im using nougat and works great
Aris
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Extremebeats
http://forum.xda-developers.com/showthread.php?t=2634729&page=514
Or you can have a look at my signature, I have link there for a working V4A. No need to set permissive or delete audio settings.
Hello
IN STOCK ROM
1.Flash SuperSu.zip
https://drive.google.com/file/d/0Bz8Gwis2qhfrblI0d1o3UmVCUUE/view?usp=drivesdk
2. Install as normal APK
https://drive.google.com/file/d/0Bz8Gwis2qhfrSW90VEVET3RreGc/view?usp=drivesdk
IN CUSTOM ROM (IF THE ROM HAVE SUPERSU ONLY)
1. Install as normal APK
NOTE:
You can update SuperSu from Google play!
Thanks
hrswhdn said:
Thanks
Click to expand...
Click to collapse
You're welcome:fingers-crossed:
1.Use any root file manager like Solid Explorer or Es Explorer and navigate to /vendor/etc. Look for a file named audio_config.conf and rename it to audio_effects.conf.bak
2.Install Busybox if you haven't.
3.Change Your Android SELinux Mode to permissive
use this link for downloading apk https://forum.xda-developers.com/android/apps-games/app-selinux-switch-t3656502
4.Boot into TWRP recovery and flash Viper4android. Then boot back into the system.
5.Activate ViPER4Android FX and setup your preferred settings. Enjoy.
Viper4android flashable zip
http://www47.zippyshare.com/v/7hDqpKdD/file.html
Viper4android +Dolby Atmos flashable zip
http://www20.zippyshare.com/v/KPLjoV4s/file.html
OR
if you have installed magisk then use the following procedure
1.Download this http://www30.zippyshare.com/v/xNtsu6XZ/file.html
2.Open Magisk manager
3.then go to Modules
4.select + & select the zip;it will start installing
5.reboot the phone and download this http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip
6.install viper4android.apk
7.done you are ready to use Dolby + Viper
Where's Dolby Atmos?
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Where's Dolby Atmos?
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Sorry for inconvenience i have updated the link
siddhrsh said:
Sorry for inconvenience i have updated the link
Click to expand...
Click to collapse
Thanks for update.
is it working...
legend827742 said:
is it working...
Click to expand...
Click to collapse
Yes
legend827742 said:
is it working...
Click to expand...
Click to collapse
Try it and report back.
Sent from my Honor 8 Pro using XDA Labs
Looks good Sidd.
Step 3, i don't know your mean and links is fail. Can u help me
Gửi từ BLL-L22 của tôi bằng cách sử dụng Tapatalk
@MinhLe01, use this instead https://forum.xda-developers.com/android/apps-games/app-selinux-switch-t3656502
What to do if i can't find audio_config.conf?
killershan said:
What to do if i can't find audio_config.conf?
Click to expand...
Click to collapse
Did you modify it before? Because you should find it easily.
killershan said:
What to do if i can't find audio_config.conf?
Click to expand...
Click to collapse
I believe you should be looking for audio_effects.conf to rename to audio_effects.conf.bak
Many thanks, works great.
Works
It works ! thanks
viper isn't installing bro...only dolby atmos is installing
so i extracted viper apk from zip & manually installed as system app......does that affect any functionality ???
Is the link titled V4A + Dolby Atmos supposed to install both applications at the same time? I would assume so, but when I install zip it says Viper 2.5.0.5 and Dolby Atmos yet Viper is nowhere to be found. I had to flash both links to get V4A and Atmos on my phone.
Dazed No More said:
Is the link titled V4A + Dolby Atmos supposed to install both applications at the same time? I would assume so, but when I install zip it says Viper 2.5.0.5 and Dolby Atmos yet Viper is nowhere to be found. I had to flash both links to get V4A and Atmos on my phone.
Click to expand...
Click to collapse
it was only dolby atoms for me as well. Havent seen Viper yet.
@siddhrsh please provide us some explanations about last comments, i was about to use Viper4A+Dolby too
RedSkull23 said:
@siddhrsh please provide us some explanations about last comments, i was about to use Viper4A+Dolby too
Click to expand...
Click to collapse
Enable viper4A in setting and configure irs as per you
Finally a working versions!
Thanks to @Oel for finding the one.
Flash the following from TWRP. Set SELinux to permissive.
https://androidfilehost.com/?fid=746010030569951476
I have used this on 8.1 without a problem.
It work in permissive only.
Install clear coche .
https://www.mediafire.com/file/guwy42zujsdy84e/Dolby-Oreo.zip
Sent from my LEX720 using xda premium
mchlbenner said:
I have used this on 8.1 without a problem.
It work in permissive only.
Install clear coche .
https://www.mediafire.com/file/guwy42zujsdy84e/Dolby-Oreo.zip
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
This is Dolby Digital, not Dolby Atmos...
A BIG difference.
The sound is really good do what want!
Sent from my LEX727 using xda premium
mchlbenner said:
The sound is really good do what want!
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
No.
The sound with Dolby Atmos is a completley different universe. The highs and the basses are more clearer and vivid. Dolby Digital sounds distored snd dump and cheap.
Oel said:
No.
The sound with Dolby Atmos is a completley different universe. The highs and the basses are more clearer and vivid. Dolby Digital sounds distored snd dump and cheap.
Click to expand...
Click to collapse
Sound good to me you will have a long wait for the other what I have heard.
Sent from my LEX727 using xda premium
Finally i found a way to bring Dolby Atmos to work on the AOSIP Oreo rom!
You need permissive Mode. (Selinux Changer)
Download this zip:
*Deleted*
Install the zip trough TWRP and reboot.
After rebooting you see only Viber4Android FX in the App Drawer.
You have to extract the Dolby Atmos App from the Zip, and to install it.
Open Dolby Atmos, it should work now.
Sent from my LEX727 using xda premium
This does not work Bluetooth brakes and then will not boot again.
You are right. After some hours it doesnt work anymore. Its not stable.
But than i found this new version from 2. February:
https://androidfilehost.com/?fid=746010030569951038
I flashed it and it works out of the box.
Testing now.....
Oel said:
You are right. After some hours it doesnt work anymore. Its not stable.
But than i found this new version from 2. February:
https://androidfilehost.com/?fid=746010030569951038
I flashed it and it works out of the box.
Testing now.....
Click to expand...
Click to collapse
You are the only one this has worked post screen shots then.
Until do post I don't believe you.
The link is not for are phone.
DolbyAtmos_Axon7_Oreo_20180202.zip
This not for a phone you will not boot.
Sent from my LEX727 using xda premium
mchlbenner said:
You are the only one this has worked post screen shots then.
Until do post I don't believe you.
The link is not for are phone.
DolbyAtmos_Axon7_Oreo_20180202.zip
This not for a phone you will not boot.
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
Here, you unbeliever...
Oel said:
Here, you unbeliever...
Click to expand...
Click to collapse
The app is crashing when I try to start it. I'm wondering if it is related to the Arise magisk module, or my Arise install. Did you have any other audio mods installed when doing this?
slgooding said:
The app is crashing when I try to start it. I'm wondering if it is related to the Arise magisk module, or my Arise install. Did you have any other audio mods installed when doing this?
Click to expand...
Click to collapse
No.
I flashed only this mod, unpacked the zip and installed the Dolby Atmos apk. Than i deleted the system partition, flashed the rom and the gapps and magisk, reboot and Fiesta.
Now i installed viber trough as magisk module. Dolby Atmos is still working and viber to.
And i had no arise config in the root!
Oel said:
No.
I flashed only this mod, unpacked the zip and installed the Dolby Atmos apk. Than i deleted the system partition, flashed the rom and the gapps and magisk, reboot and Fiesta.
Now i installed viber trough as magisk module. Dolby Atmos is still working and viber to.
And i had no arise config in the root!
Click to expand...
Click to collapse
Okay, just to make sure I have this correct. You flashed the atmos zip, then booted, installed the apk that is in the zip and then did a clean flash of AICP?
slgooding said:
Okay, just to make sure I have this correct. You flashed the atmos zip, then booted, installed the apk that is in the zip and then did a clean flash of AICP?
Click to expand...
Click to collapse
I found a newer and better Atmos mod.
https://androidfilehost.com/?fid=746010030569951476
Flash it in TWRP, should work normal.
For me it works great.
I have a X720 and i am on AOSIP Oreo 8.1.
Oel said:
I found a newer and better Atmos mod.
https://androidfilehost.com/?fid=746010030569951476
Flash it in TWRP, should work normal.
For me it works great.
I have a X720 and i am on AOSIP Oreo 8.1.
Click to expand...
Click to collapse
Confirmed working with both versions you linked. Great find. Finally!
guitardedhero said:
Standard Edition:
Latest: 20180207
MD5: 312324a14ab6644883b5828cc0bad132
- Various corrections and adjustments.
Click to expand...
Click to collapse
After flashed the dolby zip from twrp I was stuck in the boot ... then I came back in TWRP and I flashed the rom zip without wipe .... then restarted the device and it restarted well ... in the drawer there is the dolby app and it works (with some small interface flaw).
Rom aicp_zl1_o-13.1-WEEKLY-20180207 for Leeco x720
TWRP twrp-3.2.1-0-20180108-codeworkx-zl1
giogio1 said:
After flashed the dolby zip from twrp I was stuck in the boot ... then I came back in TWRP and I flashed the rom zip without wipe .... then restarted the device and it restarted well ... in the drawer there is the dolby app and it works (with some small interface flaw).
Rom aicp_zl1_o-13.1-WEEKLY-20180207 for Leeco x720
TWRP twrp-3.2.1-0-20180108-codeworkx-zl1
Click to expand...
Click to collapse
anything didnt work for me, anyone know how to work in the last version of aicp oreo? any instruction please?
Look ;
https://forum.xda-developers.com/oneplus-5/themes/app-dolby-atmos-axon-7-oreo-port-t3734040
Oel said:
I found a newer and better Atmos mod.
https://androidfilehost.com/?fid=746010030569951476
Flash it in TWRP, should work normal.
For me it works great.
I have a X720 and i am on AOSIP Oreo 8.1.
Click to expand...
Click to collapse
From the same folder https://androidfilehost.com/?fid=890129502657581615 this one worked for me perfectly too and it seems to be the latest one as the file name suggests.
[Mod][AE][GH]DolbyAtmos_Axon7_Oreo_20180207-fixed-Viper's_prepared.zip
my device X727 (Lineage OS 15.1) with magisk for systemless root. It shows up as magisk module after flashing through twrp so it needs root.
Anyone got v4a running on 9.0 with magisk?
Cowbell_Guy said:
Anyone got v4a running on 9.0 with magisk?
Click to expand...
Click to collapse
Yep :good:
https://forum.xda-developers.com/pixel-2-xl/how-to/viper-dd-atom-t3724096/post77270012
+1 via magisk module download.
madscribblerz said:
+1 via magisk module download.
Click to expand...
Click to collapse
Which module?
Cowbell_Guy said:
Which module?
Click to expand...
Click to collapse
Here's what I'm using
Cowbell_Guy said:
Which module?
Click to expand...
Click to collapse
This one
Doesn't work for me.. at least I don't see.. I don't hear any difference.. any advice?
bnbagiz said:
Doesn't work for me.. at least I don't see.. I don't hear any difference.. any advice?
Click to expand...
Click to collapse
Uninstall viper and the audio modification module. Install the viper fx module and choose original at install don't reboot. Install the audio modification module reboot. If viper has an update do this again. Hope it helps.
miked2332 said:
Uninstall viper and the audio modification module. Install the viper fx module and choose original at install don't reboot. Install the audio modification module reboot. If viper has an update do this again. Hope it helps.
Click to expand...
Click to collapse
the last time i have used viper i did not install any audio modification module. so maybe that was the problem. can you recommend one?
bnbagiz said:
the last time i have used viper i did not install any audio modification module. so maybe that was the problem. can you recommend one?
Click to expand...
Click to collapse
They're in the Magisk Module Repo.
You only need to install the modification library if you install other audio mods aside from Viper. What you might've been missing is the Audio Compatibility Patch(also in the repo). This is needed to allow all audio(such as Soundcloud that uses it's own EQ) to go through Viper. The only downside with the compatibility patch on the P2XL, it causes stuttering when 2 audio sources try to overlap each other for a good, lets say 10 seconds?
miked2332 said:
Uninstall viper and the audio modification module. Install the viper fx module and choose original at install don't reboot. Install the audio modification module reboot. If viper has an update do this again. Hope it helps.
Click to expand...
Click to collapse
..
I use this viper and have to remove and reinstall this audio mod Everytime there is a viper update. I forgot to mention I had overlap over Bluetooth about 50% of the time for the duration of use. I disabled music fx and it fixed it. For viper I choose new and original theme.
Sorry to bump an old post, but does anyone who has viper working on pie when they reboot their phone viper opens up automatically? I installed through magisk and am still on the initial release of pie. It works I just never had this happen before and curious if I'm the only one.
Fe Mike said:
Sorry to bump an old post, but does anyone who has viper working on pie when they reboot their phone viper opens up automatically? I installed through magisk and am still on the initial release of pie. It works I just never had this happen before and curious if I'm the only one.
Click to expand...
Click to collapse
You could always try this V4A version and installation. Haven't seen the issue that your reporting on this particular version and setup :good:
https://forum.xda-developers.com/pi...iper4android-compatible-t3929914/post80185220
Badger50 said:
You could always try this V4A version and installation. Haven't seen the issue that your reporting on this particular version and setup :good:
https://forum.xda-developers.com/pi...iper4android-compatible-t3929914/post80185220
Click to expand...
Click to collapse
Thank you, I'll try it out after work.