Hello;
I have an AT&T branded Note 5 which is unlocked; I am currently using it in Telcel Mexico. I still live in the ol' Android 5.1.1 - the Build Number is N920AUCU1AOGG. I've dug around a little bit and found some posts here which mention that you need to have an AT&T sim - which I obviously do not.
Other posts just say you can flash it using Kies 3... but as of right now when I run Kies 3 it tries to connect to the device then I get a message that now I can use Smart Switch. But that doesn't seem to be what I'm looking for.
Is there another way to push one of the newer, updated firmware into my device? To be honest, I have not played a lot with Android. I don't know much about all the fancy flashing and the rooting and all that.
Thanks for any advice and guidance. It is truly appreciated.
Bumping for reply
dmlargo said:
Bumping for reply
Click to expand...
Click to collapse
Guy's there is plenty info in this forum how to update with out at&t Sim card. Read little more.
Sent from my SAMSUNG-SM-G935A using XDA Premium HD app
norbarb said:
Guy's there is plenty info in this forum how to update with out at&t Sim card. Read little more.
Click to expand...
Click to collapse
I think part of what OP is saying is that it doesn't feel like there's a definitive answer. Lots of threads and comments - yes, but they vary in freshness and often conflict with each other
---------- Post added at 08:16 AM ---------- Previous post was at 07:28 AM ----------
norbarb said:
Guy's there is plenty info in this forum how to update with out at&t Sim card. Read little more.
Click to expand...
Click to collapse
I think part of what OP is saying is that it doesn't feel like there's a definitive answer. Lots of threads and comments - yes, but they vary in freshness and often conflict with each other
dmlargo said:
I think part of what OP is saying is that it doesn't feel like there's a definitive answer. Lots of threads and comments - yes, but they vary in freshness and often conflict with each other
---------- Post added at 08:16 AM ---------- Previous post was at 07:28 AM ----------
I think part of what OP is saying is that it doesn't feel like there's a definitive answer. Lots of threads and comments - yes, but they vary in freshness and often conflict with each other
Click to expand...
Click to collapse
Odin flash didn't work out for you?
I regret to tell you that I have tried every mothod (including the using USA VPN,using ATT SIM card),and finally failed. Unfortunately, it seems that flashing the full package is the only way to upgrade the system. For you, you can flash this package that I have upload before to update you phone to MM(N920AUCS3BPH4). Here's a link:
http://forum.xda-developers.com/att.../n920a-mm-odin-package-n920aucs3bph4-t3477000
If you can wait, I will upload the latest package PK1 to this post.
dmlargo said:
I think part of what OP is saying is that it doesn't feel like there's a definitive answer. Lots of threads and comments - yes, but they vary in freshness and often conflict with each other
Click to expand...
Click to collapse
Yes, this is exactly what I meant. I did search in this forum, but did not find a straightforward way to do it - like a sticky, maybe? Just different posts with different methods, some using just incremental updates and different ways to push them into the device. My got told me I needed to find the full stock firmware to push it to the device.
Fortunately, after Googling for about an hour or two I found this:
http://www.theandroidsoul.com/galaxy-note-5-stock-firmware/
http://www.galaxynote5update.com/galaxy-note5-stock-firmware/
In The Android Sould I found the stock images and Odin, with which I was able to update to N920AUCS4CPK1, which I believe is the latest update at the moment. So... yeah, I hope this two links help people out.
Thanks.
KillerFry said:
Yes, this is exactly what I meant. I did search in this forum, but did not find a straightforward way to do it - like a sticky, maybe? Just different posts with different methods, some using just incremental updates and different ways to push them into the device. My got told me I needed to find the full stock firmware to push it to the device.
Fortunately, after Googling for about an hour or two I found this:
http://www.theandroidsoul.com/galaxy-note-5-stock-firmware/
http://www.galaxynote5update.com/galaxy-note5-stock-firmware/
In The Android Sould I found the stock images and Odin, with which I was able to update to N920AUCS4CPK1, which I believe is the latest update at the moment. So... yeah, I hope this two links help people out.
Thanks.
Click to expand...
Click to collapse
Do you just download the zip and install the firmware?
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
---------- Post added at 11:19 AM ---------- Previous post was at 11:18 AM ----------
KillerFry said:
Yes, this is exactly what I meant. I did search in this forum, but did not find a straightforward way to do it - like a sticky, maybe? Just different posts with different methods, some using just incremental updates and different ways to push them into the device. My got told me I needed to find the full stock firmware to push it to the device.
Fortunately, after Googling for about an hour or two I found this:
http://www.theandroidsoul.com/galaxy-note-5-stock-firmware/
http://www.galaxynote5update.com/galaxy-note5-stock-firmware/
In The Android Sould I found the stock images and Odin, with which I was able to update to N920AUCS4CPK1, which I believe is the latest update at the moment. So... yeah, I hope this two links help people out.
Thanks.
Click to expand...
Click to collapse
Sorry I reread your thread and see that you have to Odin it. Thank you
Sent from my SAMSUNG-SM-N920A using XDA-Developers mobile app
Related
Rooted, Stock, LG8
Started getting OTA notifications this morning. Rebooted into recovery and the notifications went away. Still on LG8. Am I missing anything substantial on LI3? Should I just wait for the official JB update? Thanks in advance.
Official JB release has yet to be officially announced with a date. So, I suggest you go ahead and update. At least you'll stop getting the notifications if you do.
Sent from my SPH-L710 using xda premium
Naddict said:
Official JB release has yet to be officially announced with a date. So, I suggest you go ahead and update. At least you'll stop getting the notifications if you do.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Thanks for the reply, Naddict. Couple of questions:
-In order to update to LI3, is it as simple as going through the "System Update" utility in the settings?
-Is it safe to assume that once I update to LI3, I'll lose root?
-If so, how do I go about gaining root again? (It's been a while since I first rooted, so I'm unsure of the methods.)
kindalikemike said:
Thanks for the reply, Naddict. Couple of questions:
-In order to update to LI3, is it as simple as going through the "System Update" utility in the settings?
-Is it safe to assume that once I update to LI3, I'll lose root?
-If so, how do I go about gaining root again? (It's been a while since I first rooted, so I'm unsure of the methods.)
Click to expand...
Click to collapse
yes you must be stock and have stock revocery and it will update no problem and yes you will lose root unless you use app like ota rootkeeper or just re root like you did the first time look at qbking77 video
master acehole said:
yes you must be stock and have stock revocery and it will update no problem and yes you will lose root unless you use app like ota rootkeeper or just re root like you did the first time look at qbking77 video
Click to expand...
Click to collapse
Thanks. I'll look into it tonight.
Rookie Question
kindalikemike said:
Rooted, Stock, LG8
Started getting OTA notifications this morning. Rebooted into recovery and the notifications went away. Still on LG8. Am I missing anything substantial on LI3? Should I just wait for the official JB update? Thanks in advance.
Click to expand...
Click to collapse
Your thread is relevant to my question, so I'm hoping someone can help me, as well.
I'm new to android, and I've found that every time there is an OTA update, I cannot find ANY information on it. I received a notification to update today, as well, yet it doesn't tell me what changes will be made or what is being updated. Is this normal for android? I'm not exactly sure where to look for this information, since hitting "more info" tells me nothing.
Not trying to invade on your post, but I'm thinking you might know the answer to this.
Thanks!
acousticmike said:
Your thread is relevant to my question, so I'm hoping someone can help me, as well.
I'm new to android, and I've found that every time there is an OTA update, I cannot find ANY information on it. I received a notification to update today, as well, yet it doesn't tell me what changes will be made or what is being updated. Is this normal for android? I'm not exactly sure where to look for this information, since hitting "more info" tells me nothing.
Not trying to invade on your post, but I'm thinking you might know the answer to this.
Thanks!
Click to expand...
Click to collapse
OTA's are manufacturer specific. Sprint does provide information as to what the updates do for you. Just use the Internet machine and go to Sprint's website...
Sent from my SPH-L710 using xda premium
acousticmike said:
Your thread is relevant to my question, so I'm hoping someone can help me, as well.
I'm new to android, and I've found that every time there is an OTA update, I cannot find ANY information on it. I received a notification to update today, as well, yet it doesn't tell me what changes will be made or what is being updated. Is this normal for android? I'm not exactly sure where to look for this information, since hitting "more info" tells me nothing.
Not trying to invade on your post, but I'm thinking you might know the answer to this.
Thanks!
Click to expand...
Click to collapse
Samsung Galaxy SIII Software Update - L710VPLI3
Enhancements/Fixes
- Inclusion of SWYPE keyboard
- Improved LTE connectivity
- SMS Messaging improvements
- EAS sync improvements
Important Notes:
- The new software version is: L710VPL13
- Updates may be released in stages. When checking for the update, you may receive a message
that no update is available, check back later or wait until the update notification is sent to your device.
- Refer to the Samsung Galaxy SIII Software Updates blog for install instructions.
Naddict said:
OTA's are manufacturer specific. Sprint does provide information as to what the updates do for you. Just use the Internet machine and go to Sprint's website...
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Hi Naddict. Thanks for humoring my "Hi. I'm super new and have stupid questions" status.
My "internet machine" (awesome) must be limited to banning all updated information. On the sprint blog for S3 updates the latest one is from 9/19 and I don't see any relevant information regarding an update from today. That's where my confusion lies.
My main issue is that I don't even know what to search for, as I don't receive any information regarding the update number/title/etc.
A popup just asking me to install a "system update" doesn't really do much for me. I'll keep looking. :good:
Take care,
Mike
---------- Post added at 12:20 PM ---------- Previous post was at 12:07 PM ----------
master acehole said:
Samsung Galaxy SIII Software Update - L710VPLI3
Enhancements/Fixes
- Inclusion of SWYPE keyboard
- Improved LTE connectivity
- SMS Messaging improvements
- EAS sync improvements
Important Notes:
- The new software version is: L710VPL13
- Updates may be released in stages. When checking for the update, you may receive a message
that no update is available, check back later or wait until the update notification is sent to your device.
- Refer to the Samsung Galaxy SIII Software Updates blog for install instructions.
Click to expand...
Click to collapse
Thank you very much. I saw the Samsung Galaxy SIII Software Updates post on the Sprint website but it shows a release date of 9/19, which was causing my confusion. I was looking for something from today specifically since this is the first time I had an update popup.
Have a good one.
-Mike
acousticmike said:
Hi Naddict. Thanks for humoring my "Hi. I'm super new and have stupid questions" status.
My "internet machine" (awesome) must be limited to banning all updated information. On the sprint blog for S3 updates the latest one is from 9/19 and I don't see any relevant information regarding an update from today. That's where my confusion lies.
My main issue is that I don't even know what to search for, as I don't receive any information regarding the update number/title/etc.
A popup just asking me to install a "system update" doesn't really do much for me. I'll keep looking. :good:
Take care,
Mike
---------- Post added at 12:20 PM ---------- Previous post was at 12:07 PM ----------
Thank you very much. I saw the Samsung Galaxy SIII Software Updates post on the Sprint website but it shows a release date of 9/19, which was causing my confusion. I was looking for something from today specifically since this is the first time I had an update popup.
Have a good one.
-Mike
Click to expand...
Click to collapse
Hey... No insult meant... I always try to be humorous in my posts... Welcome to the threads!
Sent from my SPH-L710 using xda premium
Naddict said:
Hey... No insult meant... I always try to be humorous in my posts... Welcome to the threads!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
No worries! I didn't take it as an insult. It's good to have people that joke around Nice to meet ya.
Well now I'm just lost.
I used Mobile ODIN to flash a stock recovery, then I tried to flash an LG8-L13 .zip I found on another forum. I got an installation error. I went back to CWM and tried the flash the update, same error. I'm not sure what I'm doing wrong. Is there a file, or at least a link to an update .zip that works in CWM?
Edit: Just found and flashed two files through CWM. So far so good.
Here's the Link for the update:
http://www.mediafire.com/?kdm84fj9no6k3la
Here's the Link for the modem:
http://www.mediafire.com/?07mmmz6vxwpmvk4
I'm not sure why they're separate, but it's working for me.
kindalikemike said:
Well now I'm just lost.
I used Mobile ODIN to flash a stock recovery, then I tried to flash an LG8-L13 .zip I found on another forum. I got an installation error. I went back to CWM and tried the flash the update, same error. I'm not sure what I'm doing wrong. Is there a file, or at least a link to an update .zip that works in CWM?
Click to expand...
Click to collapse
Yes, I think freeza offers one in the development thread. You need a pc a good download image, and to look at the stickie by qbking... And patience
Sent from my SPH-L710 using xda premium
So I noticed, in the i9505G Android development forum, that there are flashable Odin TARs for 4.2.2, and 4.3. I was really hoping there'd be a a TAR for the M919 that makes it indistinguishable from the i9505G. I'm currently running a 4.3 ROM, but it's not quite the same.
In all of the i9505G Odin threads, it says it won't work on an M919, but it doesn't say why. What exactly are we waiting for?
If I were to start a bounty, would it be worth my time, would other people contribute, and where would I do it?
Believe the partitions are different and a bootloader.
Sent from my SGH-M919 using xda premium
dustinearley said:
So I noticed, in the i9505G Android development forum, that there are flashable Odin TARs for 4.2.2, and 4.3. I was really hoping there'd be a a TAR for the M919 that makes it indistinguishable from the i9505G. I'm currently running a 4.3 ROM, but it's not quite the same.
In all of the i9505G Odin threads, it says it won't work on an M919, but it doesn't say why. What exactly are we waiting for?
If I were to start a bounty, would it be worth my time, would other people contribute, and where would I do it?
Click to expand...
Click to collapse
Same exact question being asked, one link has the reason as to WHY this wouldn't work. Yours is unique in the sense that you want to start a bounty, but other than that, all I did was look at page 1 and copy the threads, and then I typed "i9505g" into the magical search bar... There are more that can be found with a little bit more intensive searching, but you get the point.
http://forum.xda-developers.com/showthread.php?t=2400723
http://forum.xda-developers.com/showthread.php?t=2359436
http://forum.xda-developers.com/showthread.php?t=2374095
http://forum.xda-developers.com/showthread.php?t=2343341
lordcheeto03 said:
Same exact question being asked, one link has the reason as to WHY this wouldn't work. Yours is unique in the sense that you want to start a bounty, but other than that, all I did was look at page 1 and copy the threads, and then I typed "i9505g" into the magical search bar... There are more that can be found with a little bit more intensive searching, but you get the point.
http://forum.xda-developers.com/showthread.php?t=2400723
http://forum.xda-developers.com/showthread.php?t=2359436
http://forum.xda-developers.com/showthread.php?t=2374095
http://forum.xda-developers.com/showthread.php?t=2343341
Click to expand...
Click to collapse
I've already looked at all of those posts. All they say is you can't repartition. I did some more searching last night, and found that you can't because you need files signed by Samsung, and that program doesn't exist yet?
Still wondering where the best place to post a bounty would be. Couldn't find one of those.
dustinearley said:
I've already looked at all of those posts. All they say is you can't repartition. I did some more searching last night, and found that you can't because you need files signed by Samsung, and that program doesn't exist yet?
Still wondering where the best place to post a bounty would be. Couldn't find one of those.
Click to expand...
Click to collapse
Because that tar file will attempt to flash the radio and they are incompatible.
Sent from my SGH-M919 using Tapatalk 4
Hi guys, I'm looking to port autodroid to the t310 wifi model, anyone have any idea where i'd even start with this?.....am I even allowed to port it or do I need permission from the maker of autodroid? any help would be appreciated. Thanks
Dan
dantheman1977 said:
Hi guys, I'm looking to port autodroid to the t310 wifi model, anyone have any idea where i'd even start with this?.....am I even allowed to port it or do I need permission from the maker of autodroid? any help would be appreciated. Thanks
Dan
Click to expand...
Click to collapse
You will need 3 things. It's a bit late and I'm sorry but I'm too tired to actually link them. They should be easy to find Google you can also find links on this forum. You can also watch a video on how to administer them on YouTube.
You will need to download one application and 2 files.
First you'll need an application called Odin 3.8. I believe that's the latest one.
You will need two files: 1. Philztouch recovery in an md5 file. It is no longer being updated finding it may require a little work. I personally I like it but others prefer the alternative called TWRP, also in md5 file. You will use Odin to flash one of these two files. You only need one.
Next you will need an md5 file from Chainfire. This file will unlock the device. Once it is completely rooted you will be free to load on Android 5.1. 1 and a copy of gapps.
Here is the link to Android 5.1.1
http://forum.xda-developers.com/gal.../sm-t31x-cyanogenmod-12-1-unofficial-t3094681
Good luck. - PC
PS I'm assuming this is your first modding a Samsung device. far as I know Odin is only used for Samsung devices. YouTube has plenty of videos on how to use it. Once you get the hang of it you can mod multiple Samsung devices with it.
---------- Post added at 05:55 AM ---------- Previous post was at 05:51 AM ----------
Gah!! I just wrote all that out for no reason. Lol I just realized you were asking for a totally different ROM. What I link is actually cm. It is late and I need to go to bed.
Disregard the last post. I am tired.
Hey Everyone!
I am at it again! I have made leaps today with my custom ROM.
It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.
Required:
1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!
What will it contain in v1?
1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!
Suggestions?
Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.
Questions?
1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)
Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!
Paypal email:
[email protected]
(Remember, donations are NOT required as we do this for fun and for FREE!)
I suggest you don't be selfish and hook your boy with the s7 edge up with a Rom 'U' version only keep it simple
2swizzle said:
I suggest you don't be selfish and hook you boy with the s7 edge up with a Rom 'U' version only keep it simple
Click to expand...
Click to collapse
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
I know that's why I said that lol. Good to see you at it again. If I recall you work like 60 hours a week and that's only one of your jobs lol jk
2swizzle said:
I know that's why I said that lol. Good to see you at it again. If I recall you work like 60 hours a week and that's only one of your jobs lol jk
Click to expand...
Click to collapse
yea, this week imdoin OT everyday so ton of hours..
elliwigy said:
Hey Everyone!
I am at it again! I have made leaps today with my custom ROM.
It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.
Required:
1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!
What will it contain in v1?
1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!
Suggestions?
Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.
Questions?
1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)
Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!
Paypal email:
[email protected]
(Remember, donations are NOT required as we do this for fun and for FREE!)
Click to expand...
Click to collapse
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)
elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
Just using flashfire?
---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------
elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
Where did you find his rom? How's battery?
RockyCJC said:
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)
Click to expand...
Click to collapse
I can upload the U firmware..i cant remember where i got it
For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1
Illogi.xbone said:
Just using flashfire?
---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------
Where did you find his rom? How's battery?
Click to expand...
Click to collapse
1) I am going to use a rom.zip but you will still need the eng boot to have root i believe so odin 930U then root usig eng boot then flash my ROzm in FF
2) his rom is in the vzw s7e forum
Is the goal here to remedy the battery life issues and CPU hangs that the eng boot/root process created? I'm excited!
Sent from my SM-G930V using Tapatalk
elliwigy said:
I can upload the U firmware..i cant remember where i got it
For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1
Click to expand...
Click to collapse
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Sent from my SM-G930V using Tapatalk
fronc01 said:
Is the goal here to remedy the battery life issues and CPU hangs that the eng boot/root process created? I'm excited!
Click to expand...
Click to collapse
I recommend you check out my other rom threads to see what the goal is..
essentially I shoot for an extremely debloated rom which typically does include better speed and battery life but that is more of a side effect imo
RockyCJC said:
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Click to expand...
Click to collapse
Not necessarily. some of it does work.. ideally however i like to bake things in.. the less zips to flash the better.. i wont worry too much as i dont release roms that dont work well to begin with
RockyCJC said:
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.
psouza4 said:
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.
Click to expand...
Click to collapse
Gotcha.. its not my top priority to be honest but its not difficult to do so ill most likely do it
I can confirm the U firmware works flawlessly on a G930V. I have also flashed @jrkruse's PlayStore ROM on my G930V, and it works great!
@elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!
---------- Post added at 04:46 PM ---------- Previous post was at 04:46 PM ----------
[/COLOR @elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!
CVertigo1 said:
I can confirm the U firmware works flawlessly on a G930V. I have also flashed @jrkruse's PlayStore ROM on my G930V, and it works great!
Click to expand...
Click to collapse
it sure does! im on his playstore rom as well right now.. i will be working on my rom some more tonight. have an FC to figure out during initial setup
elliwigy said:
it sure does! im on his playstore rom as well right now.. i will be working on my rom some more tonight. have an FC to figure out during initial setup
Click to expand...
Click to collapse
When does the FC happen exactly? I've had this issue when modifying ROMs, so I might be able to help.
CVertigo1 said:
When does the FC happen exactly? I've had this issue when modifying ROMs, so I might be able to help.
Click to expand...
Click to collapse
if i leave setup wizards in it fcs when it trys to set up the google acct during initial setup so i cant get past the setup..
if i remove both wizards it just fcs whenever trying to add a google acct..
i didnt remove any google apks so it must be lookin for something else i removed.. i will start from scratch tom. evening or Sunday.
Can anyone point me to a trustworthy source for the latest BL and CP downloads for the N910P? All Google searches have shown me are sketchy sites and old threads from 1-2 years ago. Thanks!
kkslider1 said:
Can anyone point me to a trustworthy source for the latest BL and CP downloads for the N910P? All Google searches have shown me are sketchy sites and old threads from 1-2 years ago. Thanks!
Click to expand...
Click to collapse
Latest bl is qi5 but I don't recommend it as it is fused and can cause problems going backwards.
edozier said:
Latest bl is qi5 but I don't recommend it as it is fused and can cause problems going backwards.
Click to expand...
Click to collapse
3 newb questions, bear with me:
Is the newest modem included in Qi5?
What does "fused" mean?
Why would I want to go backwards?
kkslider1 said:
3 newb questions, bear with me:
Is the newest modem included in Qi5?
What does "fused" mean?
Why would I want to go backwards?
Click to expand...
Click to collapse
Many of the custom roms were built for prior bootloaders and some have issues or may not be supported on the latest qi5 bootloader. Fused means that once you flash it you can no longer flash an earlier one. Once you do it prior versions will fail to flash in Odin.
---------- Post added at 04:37 AM ---------- Previous post was at 04:35 AM ----------
kkslider1 said:
3 newb questions, bear with me:
Is the newest modem included in Qi5?
What does "fused" mean?
Why would I want to go backwards?
Click to expand...
Click to collapse
Read the thread below yours.
https://forum.xda-developers.com/note-4-sprint/general/firmware-qi5-released-10-11-2017-t3686982