Hey Everyone!
I am at it again! I have made leaps today with my custom ROM.
It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.
Required:
1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!
What will it contain in v1?
1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!
Suggestions?
Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.
Questions?
1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)
Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!
Paypal email:
[email protected]
(Remember, donations are NOT required as we do this for fun and for FREE!)
I suggest you don't be selfish and hook your boy with the s7 edge up with a Rom 'U' version only keep it simple
2swizzle said:
I suggest you don't be selfish and hook you boy with the s7 edge up with a Rom 'U' version only keep it simple
Click to expand...
Click to collapse
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
I know that's why I said that lol. Good to see you at it again. If I recall you work like 60 hours a week and that's only one of your jobs lol jk
2swizzle said:
I know that's why I said that lol. Good to see you at it again. If I recall you work like 60 hours a week and that's only one of your jobs lol jk
Click to expand...
Click to collapse
yea, this week imdoin OT everyday so ton of hours..
elliwigy said:
Hey Everyone!
I am at it again! I have made leaps today with my custom ROM.
It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.
Required:
1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!
What will it contain in v1?
1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!
Suggestions?
Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.
Questions?
1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)
Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!
Paypal email:
[email protected]
(Remember, donations are NOT required as we do this for fun and for FREE!)
Click to expand...
Click to collapse
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)
elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
Just using flashfire?
---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------
elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
Where did you find his rom? How's battery?
RockyCJC said:
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)
Click to expand...
Click to collapse
I can upload the U firmware..i cant remember where i got it
For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1
Illogi.xbone said:
Just using flashfire?
---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------
Where did you find his rom? How's battery?
Click to expand...
Click to collapse
1) I am going to use a rom.zip but you will still need the eng boot to have root i believe so odin 930U then root usig eng boot then flash my ROzm in FF
2) his rom is in the vzw s7e forum
Is the goal here to remedy the battery life issues and CPU hangs that the eng boot/root process created? I'm excited!
Sent from my SM-G930V using Tapatalk
elliwigy said:
I can upload the U firmware..i cant remember where i got it
For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1
Click to expand...
Click to collapse
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Sent from my SM-G930V using Tapatalk
fronc01 said:
Is the goal here to remedy the battery life issues and CPU hangs that the eng boot/root process created? I'm excited!
Click to expand...
Click to collapse
I recommend you check out my other rom threads to see what the goal is..
essentially I shoot for an extremely debloated rom which typically does include better speed and battery life but that is more of a side effect imo
RockyCJC said:
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Click to expand...
Click to collapse
Not necessarily. some of it does work.. ideally however i like to bake things in.. the less zips to flash the better.. i wont worry too much as i dont release roms that dont work well to begin with
RockyCJC said:
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.
psouza4 said:
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.
Click to expand...
Click to collapse
Gotcha.. its not my top priority to be honest but its not difficult to do so ill most likely do it
I can confirm the U firmware works flawlessly on a G930V. I have also flashed @jrkruse's PlayStore ROM on my G930V, and it works great!
@elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!
---------- Post added at 04:46 PM ---------- Previous post was at 04:46 PM ----------
[/COLOR @elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!
CVertigo1 said:
I can confirm the U firmware works flawlessly on a G930V. I have also flashed @jrkruse's PlayStore ROM on my G930V, and it works great!
Click to expand...
Click to collapse
it sure does! im on his playstore rom as well right now.. i will be working on my rom some more tonight. have an FC to figure out during initial setup
elliwigy said:
it sure does! im on his playstore rom as well right now.. i will be working on my rom some more tonight. have an FC to figure out during initial setup
Click to expand...
Click to collapse
When does the FC happen exactly? I've had this issue when modifying ROMs, so I might be able to help.
CVertigo1 said:
When does the FC happen exactly? I've had this issue when modifying ROMs, so I might be able to help.
Click to expand...
Click to collapse
if i leave setup wizards in it fcs when it trys to set up the google acct during initial setup so i cant get past the setup..
if i remove both wizards it just fcs whenever trying to add a google acct..
i didnt remove any google apks so it must be lookin for something else i removed.. i will start from scratch tom. evening or Sunday.
Related
So my mother's non-rooted stock UVDMD5 S3 was sitting there and mobile background said update checker used 3 kb, so I checked the update checker and a 527.00 MB file started downloading. Just a heads up, is it the new download?
Edit 1 : Confirmed, this is Android 4.3 official.
FunMuscle said:
Confirmed. Kernel version 3.0.31-1962493, Produced October 31.
Click to expand...
Click to collapse
Edit 2 : @DocHoliday77 has confirmed this actual OTA is ONLY for the SGH-T999..if you don't have one (you won't get the OTA) but DO NOT FLASH OR ATTEMPT TO FLASH ANY ODIN FILES!
Edit 3 : This has KNOX. Proceed at caution.
Edit 4 : have you ever been to jail? No? Me either. But if I had to picture it this update is much like it. Still to Docs leak thread or AOSP but don't touch this with a fine toothcomb if you want to root and later downgrade.
TheLastSidekick said:
So my mother's non-rooted stock UVDMD5 S3 was sitting there and mobile background said update checker used 3 kb, so I checked the update checker and a 527.00 MB file started downloading. Just a heads up, is it the new download?
Edit : still not downloaded yet. The download is slow I may not know what the update was until 4 PM because she's going to work right now.
Click to expand...
Click to collapse
Downloading now, will advise in 40 minutes. However, there's only one thing it could be... 4.3.
FunMuscle said:
Downloading now, will advise in 40 minutes. However, there's only one thing it could be... 4.3.
Click to expand...
Click to collapse
Thanks! Proceed at your own risk, for I cannot be sure current method of root will continue to work on 4.3 ...
TheLastSidekick said:
Thanks! Proceed at your own risk, for I cannot be sure current method of root will continue to work on 4.3 ...
Click to expand...
Click to collapse
One way to find out, I suppose. I'm not currently rooted, the phone's bone-stock. Saw the download and immediately came here to see what was going on. Under 30 megs remaining.
check samfirmware...theres an update with over 800 mb
I guess that's a confirmation. Any issues? The AT&T version was riddled with problems.
Edit- Confirmed. Kernel version 3.0.31-1962493, Produced October 31.
According to Kies the update is MJC so its probably the same or similar to leak version DOC post .
Sent from my SM-T210R using xda app-developers app
Nice to see T-Mobile being the first to release 4.3. I will definitely check it out when I get home today.
Sent from my SGH-T999 using Tapatalk
So does this include the kernel that we were missing for 4.3?
Powered by the SGSIII
ThC23 said:
So does this include the kernel that we were missing for 4.3?
Powered by the SGSIII
Click to expand...
Click to collapse
Yes sir.
TheLastSidekick said:
Yes sir.
Click to expand...
Click to collapse
Cool! I'd say something like, "Hopefully, we'll should see a rooted version soon...", but this is XDA where it's definitely possible.
awww man!!!! and i cant play! lol!
seriously though, this is awesome! im bout to download in a min. will then upload to AFH so you guys dont have to wait on that blazing fast Hotfile!
will post more info in a few...
but yes, its the same as my leaked build, can anyone confirm if i was correct and knox is NOT included?
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2
anyone have any issues with the update? I saw on engadget that some other carriers pulled the update due to problems
Can someone upload a rooted Odin package, please!
If possible, if not without root.
Thanks
Powered by the SGSIII
Ok, something important to be aware of. From piecing information together from users around these and other forums, it appears just about everyone who had problems with the 4.3 update had updated via OTA. So if you choose to update this way, please let us know how things go. But if you do experience problems, DONT PANIC, Grab Your Towel, and start downloading the Odin flashable full firmware update.
This of course will include the T-Mobile kernel. I am 90% certain that the reason WiFi did not work with the leaked kernel is because we did not flash the full firmware update. I believe the WiFi modules needed to be built into the bootloader (likely the aboot partition to be exact). This is what I was attempting to confirm when I bricked my phone. So by flashing the full firmware/OTA update, you should have a fully working build, including WiFi if I am correct.
Aside from this, I would suggest reading through some of my posts in the leaked Rom threads. This is the same build that was leaked to us a week or so ago. Do let me know how things are going, I wish I could join you guys in the discovery phase of this "official" version, but I seriously doubt that other than the kernel working, and Knox likely being left out, it will be any different from what we have been using.
I do not see any reason you should not be able to root, but I will get an insecure kernel posted asap. As soon as my download finishes. In the meantime, if anyone wants the insecure kernel from the leaked build, it should be exactly the same one. Download here:
UVUEMJC_Insecure_kernel.zip
Hope everything goes well, and I am still here to help!
---------- Post added at 10:34 AM ---------- Previous post was at 10:31 AM ----------
ThC23 said:
Can someone upload a rooted Odin package, please!
If possible, if not without root.
Thanks
Powered by the SGSIII
Click to expand...
Click to collapse
a root66 version will be coming soon. These have always been released within a day of us getting a new official release. Please be patient though, as I don't think mrRobinson has the S3 anymore. I will send him the download link as soon as I have it posted on my AFH account.
If he cannot get to it, i will do my best to get you guys a root66 build asap. But again, please be patient.
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
You know, I have to be honest....I was hoping to be wrong about the latest leak becoming our official build! Was hoping they would update one more test build first, then we would have had another kernel/modem/build......oh well! I must say that I am quite surprised they went through with our release so quickly!
Someone must be watching us......
Thanks Doc, I'm in no rush.
Thanks for all your help, great appreciated.
Powered by the SGSIII
oh, one more thing. if updating via ota, try Voodoo OTA Roitkeeper from the store. its worked in the past to preserve root.
and can someone pull the ota before applying it, and upload it for me please?
look in /data/fota, /data/temp, /cache/fota
its there somewhere, just cant remember for certain.
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2
Where can you get an Odin package without root? My doesn't care about root but would still like an solid update incase the ota has bugs
Sent from my SGH-T999 using xda app-developers app
Supamike88 said:
Where can you get an Odin package without root? My doesn't care about root but would still like an solid update incase the ota has bugs
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
samsung–updates.com
sammobile.com
sammobile requires registration.
if you want to wait a few i will have it posted in my firmware thread where you can download it MUCH faster. hotfile takes a while.
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2
I'm bone stock rooted and software update complained about software being modified. Can someone confirmed that the T999L AND T999 are being updated.
Stock 4.4.4 NK2 Galaxy S4 M919/Jfltetmo
Yes this is T-mobile firmware and yes it has wifi calling.
Stock
Rooted
BusyBox
Knoxless
CIQless
Deodexed
Zip Aligned
ArchiInit'd support
ro.securestorage.support=false
commented out security.mdpp=None
Everything else completely untouched.
DOWNLOAD HERE
Stock NK2 kernel set to permissive
DOWNLOAD HERE
Modem file
DOWNLOAD HERE
Issues
Shouldn't be any.
You dirty little girl. Ha.. Happy new year bud and thanks!
Sent from my SGH-M919 using Tapatalk
Whoa, is this a new official release from Samsung/T-Mobile?
hella356 said:
Whoa, is this a new official release from Samsung/T-Mobile?
Click to expand...
Click to collapse
It's been out a few weeks. Like 2 or 3 but yeah
ShinySide said:
It's been out a few weeks. Like 2 or 3 but yeah
Click to expand...
Click to collapse
Guess I've been out of the loop. I'm running the previous 4.4.4; can this just be installed in recovery or does this bring in a new bootloader? Have you seen any differences with the new modem?
Thanks for helping keep the development rolling with the S4!
hella356 said:
Guess I've been out of the loop. I'm running the previous 4.4.4; can this just be installed in recovery or does this bring in a new bootloader? Have you seen any differences with the new modem?
Thanks for helping keep the development rolling with the S4!
Click to expand...
Click to collapse
If you want the new bootloader and all that flash the full firmware, I have it posted in my firmware thread in general.
Just flash via twrp/cwr/Philz
Dunno. I no longer have the device. Upgraded to the s5 and gave my 4 to my mom
I have a sprint s4. I unlocked it domestically using tutorials available in XDA and I'm using my phone on Tmobile now. Is it possible to flash this ROM to get WiFi calling?
avruma said:
I have a sprint s4. I unlocked it domestically using tutorials available in XDA and I'm using my phone on Tmobile now. Is it possible to flash this ROM to get WiFi calling?
Click to expand...
Click to collapse
Has wifi calling. Will it work for you not being a m919? Dunno 50/50 chance.
Been waiting for deodexed version. Thanks OP
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
ShinySide said:
Has wifi calling. Will it work for you not being a m919? Dunno 50/50 chance.
Click to expand...
Click to collapse
Sir
may ask if you have S4 tw 4.4.4 stock systemui with flashlight?
Love you ROM but my eyes failed me. And I can't use SICKs because I detest 3minit framework.
Thanks in advance
Do we flash the modem file in Odin?
How about the kernel? in TWRP?
So what should be the order.
Flash modem in odin,
then full rom in TWRP then lastly the kernel?
thanks in advance.
tyrone1 said:
Do we flash the modem file in Odin?
How about the kernel? in TWRP?
So what should be the order.
Flash modem in odin,
then full rom in TWRP then lastly the kernel?
thanks in advance.
Click to expand...
Click to collapse
Modems always with odin.
Kernel, twrp
Modem, rom, kernel
Rom kernel modem
Rom modem kernel.
Doesn't really matter. Except rom before kernel.
ShinySide said:
Modems always with odin.
Kernel, twrp
Modem, rom, kernel
Rom kernel modem
Rom modem kernel.
Doesn't really matter. Except rom before kernel.
Click to expand...
Click to collapse
Thanks for your fast reply. I'm having a difficult time getting this to work.
I did the modem, before i even did anything else and verified that the baseband said nk2.
Then i tried installing the rom, and then immediately installing the kernal, then booting into system.
It all seems to work but i can't seem to get wifi to turn on. So i tried wiping all again, and booting into system and same thing.
Any suggestions? I'm trying to flash the system again without the kernel and will see if it works. Can you help explain what the kernel does?
thanks shinyside
tyrone1 said:
Thanks for your fast reply. I'm having a difficult time getting this to work.
I did the modem, before i even did anything else and verified that the baseband said nk2.
Then i tried installing the rom, and then immediately installing the kernal, then booting into system.
It all seems to work but i can't seem to get wifi to turn on. So i tried wiping all again, and booting into system and same thing.
Any suggestions? I'm trying to flash the system again without the kernel and will see if it works. Can you help explain what the kernel does?
thanks shinyside
Click to expand...
Click to collapse
Shouldn't have an issue, least none of the 60 download and runners, have said anything or reported any issues.
What bootloader and such are you on?
Just set to permissive, or should be haha, I don't have my s4 anymore to check. Should say permissive in Settings. Stock kernel is set to enforcing which is a "security" thing that blocks stuff like a lot of root apps or xposed/xposed modules from working properly. It's the stock kernel, just the ramdisk is edited to be permissive.
ShinySide said:
Shouldn't have an issue, least none of the 60 download and runners, have said anything or reported any issues.
What bootloader and such are you on?
Just set to permissive, or should be haha, I don't have my s4 anymore to check. Should say permissive in Settings. Stock kernel is set to enforcing which is a "security" thing that blocks stuff like a lot of root apps or xposed/xposed modules from working properly. It's the stock kernel, just the ramdisk is edited to be permissive.
Click to expand...
Click to collapse
Can't seem to get it to work. So i just restored a old backup i had of your stock NH7 rom and wifi works in there.... so i then proceded to try to flash the new rom over the NH7 version but after it all booted up, wifi not working again
For me at least seems that wifi not working in Nk2
Modem using Odin. There is instruction written for nh7. Exact procedure should be used. Reboot to make sure you have the new modem. Then flash rom immediately flash the permissive kennel. If you want you can also flash supersu 2.40 then reboot
---------- Post added at 07:38 PM ---------- Previous post was at 07:34 PM ----------
Flash a different kernel. WiFi will work. Check sickness mod v5. It has few kernels you can use
mrbackdoor said:
Modem using Odin. There is instruction written for nh7. Exact procedure should be used. Reboot to make sure you have the new modem. Then flash rom immediately flash the permissive kennel. If you want you can also flash supersu 2.40 then reboot
---------- Post added at 07:38 PM ---------- Previous post was at 07:34 PM ----------
Flash a different kernel. WiFi will work. Check sickness mod v5. It has few kernels you can use
Click to expand...
Click to collapse
Hey if you still want the flashlight send me the secsettings and systemui apks. I already deleted the zip off my pc
What are the major differences between NH7 / NK2?
Thanks for your continued support and efforts with the Galaxy S4 development.
My question is this, if I may . . .
What are the major differences between NH7 / NK2?
Was there some new service that Samsung rolled out?
In what way is NK2 better than NH7 ?
Thanks in advance for your reply . . . :good:
ShinySide said:
Hey if you still want the flashlight send me the secsettings and systemui apks. I already deleted the zip off my pc
Click to expand...
Click to collapse
Yes I do still want it very much. Can you use the apks from your HispAsian latest release? Love that rom.
Thanks
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
serendipityguy said:
Thanks for your continued support and efforts with the Galaxy S4 development.
My question is this, if I may . . .
What are the major differences between NH7 / NK2?
Was there some new service that Samsung rolled out?
In what way is NK2 better than NH7 ?
Thanks in advance for your reply . . . :good:
Click to expand...
Click to collapse
From what I know using both: modem (baseband) and additional support languages.
From what I have experienced, lte reception is a tat better.
I would just flash the modem unless you like stock.
mrbackdoor said:
Yes I do still want it very much. Can you use the apks from your HispAsian latest release? Love that rom.
Thanks
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
From what I know using both: modem (baseband) and additional support languages.
From what I have experienced, lte reception is a tat better.
I would just flash the modem unless you like stock.
Click to expand...
Click to collapse
Stock is always nice, but I was thinking that there was a new service that was an addition to what was previously released.
Thinking that there was a cross over to Lollipop with a touch-wiz enhancement.
Some new security level or even a Samsung service with data like you mentioned enhancement with LTE. . .
Even though it is Stock, I sure would like to know what was different about this release and why is Samsung pushing this release out.
Hopefully it wont be long before other developers pick this puppy up and tweak the heck of the property build and include the 4 way reboot and such . ...
Stock is always sweet :good:
mrbackdoor said:
Yes I do still want it very much. Can you use the apks from your HispAsian latest release? Love that rom.
Thanks
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
From what I know using both: modem (baseband) and additional support languages.
From what I have experienced, lte reception is a tat better.
I would just flash the modem unless you like stock.
Click to expand...
Click to collapse
You'd have use the settings, framework, system ui, mms, contacts, phone, and all to use the systemui and settings from HispAsian. I modded and themed the living hell out of that rom, and you'd have some major text issues and other ui issues, using its systemui and settings in this base among other issues probably. Have to use the ones from the base and just mod it in
serendipityguy said:
Thanks for your continued support and efforts with the Galaxy S4 development.
My question is this, if I may . . .
What are the major differences between NH7 / NK2?
Was there some new service that Samsung rolled out?
In what way is NK2 better than NH7 ?
Thanks in advance for your reply . . . :good:
Click to expand...
Click to collapse
Cant answer any of them. I can't run it as I don't own my s4 anymore. Some one asked if I'd do a nk2 so waalaa haha
Would you update your device to fix the Stagefright? Or would skip the update because you want root? Let's hope the current root trick works on this one.
Full build no. G920PVPU2BOGA.
Via
itskapil said:
Would you update your device to fix the Stagefright? Or would skip the update because you want root? Let's hope the current root trick works on this one.
Full build no. G920PVPU2BOGA.
Via
Click to expand...
Click to collapse
This issues has been around for awhile so i would wait to see what the developers do
I'm not rooted so I just downloaded this 53mb update and it's applying now. Actually advises that it's a security fix for Stagefright and nothing else. It has finished applying in the time I've been typing this and just rebooted, but it has to go through the app optimizing. It jumped up to 224 of 348 quick enough, but the time consuming wait for the rest of them. Tick, tock...
Downloaded and am installing now.
I installed this update did not notice anything else changed. For some reason the s6 stagefright fix was only around 50MB while the S5 was close to 300MB, and the only thing claimed to be fixed in the s5 release notes was the same thing.
Updated, and screw root. Phone good enough to not need it.
Sent from my SM-G920P using Tapatalk
Saafir said:
It's never good enough to not have root hehe
Click to expand...
Click to collapse
What he ^^^^^ said!
Can someone give me an fast link to the OGA G920P or G925P firmware please? Or to the OTA zip.
So that I can rip the fixed stagefright lib files from it for my ROM.
Getting 1.2gb system RAM usage after the update. Hoping it's a tiny fix, it's a relief to have 600MB more free to do what I want with, was getting 1.8/1.9GB system ram usage before update.
Will post update in a few hours to see if this is still true.
Any root for it yet guys?
---------- Post added at 06:11 AM ---------- Previous post was at 05:51 AM ----------
So I was looking up where to get the kernel source code for the new oga update and Samsung has not released it yet.. I was thinking of trying to learn how to make a kernel myself for root
I updated then flashed unikernel v6 0001 in odin and twrp and am now rooted on stock OGA , just wish i could remove carrieriq and itson.
Sent from my SM-G920P using XDA Free mobile app
george241312 said:
Any root for it yet guys?
---------- Post added at 06:11 AM ---------- Previous post was at 05:51 AM ----------
So I was looking up where to get the kernel source code for the new oga update and Samsung has not released it yet.. I was thinking of trying to learn how to make a kernel myself for root
Click to expand...
Click to collapse
Update then use odin to flash unikernel v6-0001 and then the twrp both here in xda forums. i did this and have full root with no issues.
Can someone (who have rooted OGA) upload all stagefright lib files in /system/lib & /system/lib64 folders for me please?
So that I can make an Stagefright flashable fix for all S6 models/firmwares.
edgarf28 said:
Can someone (who have rooted OGA) upload all stagefright lib files in /system/lib & /system/lib64 folders for me please?
So that I can make an Stagefright flashable fix for all S6 models/firmwares.
Click to expand...
Click to collapse
Assuming the libs are the same for 920P and 925P, someone posted theirs for the 925P here.
edit - I don't know that they were rooted though.
fachadick said:
Assuming the libs are the same for 920P and 925P, someone posted theirs for the 925P here.
edit - I don't know that they were rooted though.
Click to expand...
Click to collapse
Ah thank you very much for this!! :good:
Will test them out on my G925F based ROM.
EDIT: Unfortunately they doesn't work on the F firmware
Everything is good after this update, but cent that the battery seems to be going down faster
Sent from my SM-G920P using XDA Free mobile app
waoasis said:
Everything is good after this update, but cent that the battery seems to be going down faster
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
If your still on stock kernel then battery does suck down quick
sent from rooted G920P on OGA
Tried unikernel v6 and failed
Tried, went through Ok, but when got to phone the screen wouldn't work. Wouldn't register finger. Buttons worked though. Idk
You tried the update or changing kernel?
sent from rooted G920P on OGA
Did update, then used the mentioned kernel. Pass in Odin, but when phone rebooted just the buttons where working. No touch screen
Is there a way to install some other carrier rom on sprint Galaxy note 4. I know you can use verizon rom on Sprint Galaxy s4.
MO
Here you go lol
M
1more
Mo
Last 1
ricohz said:
Last 1
Click to expand...
Click to collapse
Show off.. lol?
here you go buddy
fallow link scroll down and read most note 5 ports work and some others
http://forum.xda-developers.com/not...yubi-rom-note-5-t3220106/page313#post66317421
SPRINT USERS
I am not a dev we have to give credit where credit is do
special thanks to battlehero,Friedrich420 and echo team, OvrDriVE, klpfl,Aaron, D,freeza, tx_dbs_tx and all devs that build the roms for us
1st download files and rom of choice on pc
open rom zip don't extract go to system/ framework and drag framwork jar and framework res files(thanksOvrDrive) it will ask if you would like to replace so just replace it close rom and put it on your phone storage
make sure files are on phone storage as well and get ready to flash
(flash all zips on the same section )
flash rom
flash kernel of choice I use ael kernel(thanks friedrich)
flash sprint zip(dont really remember where I got it from)
flash sprint data fix 1(thanks battlehero)
flash apn fix (thanks klpfl)
reboot now make sure that you wait for phone to activate then enjoy make sure you support devs of roms you use
most note 5 ports work
make sure you back up everything
you will need the sprint voicemail apk search for it here on xda
get the quick shorcut maker( playstore)open apk search for phone 3 phone files will show up click the 3rd one scroll down to data roaming make a shorcut and make sure data roaming is set to your liking
make sure you have a stock rom on storage I had an issue once it was all my fault flashing all kinds of things anyways I lost all data and signals none of my backups worked I tried re flashing port and i could't get signal or data to work only thing that worked was flashing stock rom (thanks tx_dbs_tx)
---------- Post added at 09:22 AM ---------- Previous post was at 09:17 AM ----------
Voice mail apk http://forum.xda-developers.com/gal...s/modded-sprint-visual-voicemail-apk-t2994978
Go to battlehero tread and get sprint data fix 1
http://forum.xda-developers.com/not...yubi-rom-note-5-t3220106/page313#post66317421
Zip
download zip and extract
This is not a flasheble zip
And thats how we do it
Roms I've tried that work
ECHOES Rom
Maximum OvrDrive
Dr.Ketan
Emotion
And more to drunk to remember right now lol
Hell yeah
Sent from my SM-N910P using XDA-Developers mobile app
Would this work on Roms based on AOSP such as the Dirty Unicorns 10.0 ROM?
http://forum.xda-developers.com/note-4/snapdragon-dev/rom-dirty-unicorns-10-0-t3331009
Not sure but if I was going to do it I would pull framework jar and apk from an aosp rom that already works on sprint
I know the sprint zip came from a cm tread
The data fix is where I wouldn't have a clue if it works on an aosp rom
For kernel I would go with emotion
@ricoh nice bro
Sent from my SM-N920P using XDA-Developers mobile app
What ROMs do you know that are working for sure? I've been reading around the T-Mobile forums and some say it has to be on a certain baseband. Does this matter?
EthanM054 said:
What ROMs do you know that are working for sure? I've been reading around the T-Mobile forums and some say it has to be on a certain baseband. Does this matter?
Click to expand...
Click to collapse
Yes. Absolutely. everything matters. You can't simply flash a T-mobile or Verizon Note 4 rom on our sprint note 4 and it work. not gonna happen. Especially roms built specifically for GSM networks and different hardware/chipsets. These things are critical and there's no exceptions. If you want to flash a Verizon, AT&T, T-Mobile or other international rom on the sprint Note 4 SM-N910P then you're gonna have to do more than swap out the framework.jar and framework-res. I guarantee it. Don't fall for the okey doke stuff! :silly:
You should try it works ill make a video soon few people have done it
ricohz said:
You should try it works ill make a video soon few people have done it
Click to expand...
Click to collapse
Please do! I really wanna try this but I'm just really worried I'll mess up my phone..
OK got video but it shows my number too late now I'll make another tomorrow or edit the one I made
EthanM054 said:
Please do! I really wanna try this but I'm just really worried I'll mess up my phone..
Click to expand...
Click to collapse
Pm sent dont plz don't post videos
tx_dbs_tx said:
Yes. Absolutely. everything matters. You can't simply flash a T-mobile or Verizon Note 4 rom on our sprint note 4 and it work. not gonna happen. Especially roms built specifically for GSM networks and different hardware/chipsets. These things are critical and there's no exceptions. If you want to flash a Verizon, AT&T, T-Mobile or other international rom on the sprint Note 4 SM-N910P then you're gonna have to do more than swap out the framework.jar and framework-res. I guarantee it. Don't fall for the okey doke stuff! :silly:
Click to expand...
Click to collapse
Hey tx you should really try it it does work not sure why but ut does . I know that WiFi calling doesn't work but it doesn't work on original rom and also the sprint vvm doesn't work but other then that everything else works
Hey guys, here is the long awaited LTE fix for perry and owens users.
Please do a clean install of your custom rom of choice before immediately flashing this before the first boot for best results. (I prefer to use squid2's lineage build)
If you don't do this, you may have to reset your apns to default in settings. Preferred network mode should be set to Global.
Steps for installation:
Download the apns-conf for your carrier and blobs.zip (apns-conf.sprint.zip for Sprint, apns-conf.boost.zip for Boost, and apns-conf.stock.00modified.zip for everything else)
Stick them on your phone's SD card
Flash the two zip files you downloaded
apns-conf.stock.00modified.zip Download
apns-conf.sprint.zip Download
apns-conf.boost.zip Download
blobs.zip Download
EDIT: Apparently the apn's are only working in the condensed versions for Sprint/Boost, so I've uploaded apns-conf for both of those.
EDIT2: Yea, it actually looks like they are working, you just have to be sure to flash stock firmware for your device prior to clean installing rom and the fix. Otherwise no guarantees any of it will work.
So you think it will work with virgin mobile too? Just flash rom and your 2 zips?
madbat99 said:
So you think it will work with virgin mobile too? Just flash rom and your 2 zips?
Click to expand...
Click to collapse
Possibly. It's not confirmed, and kinda hard to tell since your telephony.db didn't have any obvious missing internet apn's, but this has the sprint internet apn added to it and the 310 00 modifications, so it has the best chance of working of anything that has been released. Especially since I fixed the blobs.. and yes, you just flash the rom and 2 zips.
Now is there a way to incorporate this fix automatically in ROMs, be it via cherry-picking a commit or including the zip file to auto flash during a rom installation?
fireball0093 said:
Now is there a way to incorporate this fix automatically in ROMs, be it via cherry-picking a commit or including the zip file to auto flash during a rom installation?
Click to expand...
Click to collapse
This is the fix for the blobs in the vendor files:
https://github.com/MotoOwensDevel/p...mmit/e8c74378e816d9940d34544f85c08dc45145a694
As for the APNs, I have a release tools script for the owens device tree that installs my modified stock APNs
https://github.com/MotoOwensDevel/android_device_motorola_owens/blob/cm-14.1/releasetools.py
You'll have to kinda look at https://github.com/MotoOwensDevel/android_device_motorola_owens to see how it works completely, but this is already incorporated in my lineage build for the Moto E4 Plus.
EDIT: I'm going to have to change the release tools script a bit more, because apparently the apns only like to work in the condensed forms for Sprint/Boost.
EDIT2: I've implemented the fix in the owens device tree.
EDIT3: Reverted the fix, looks like the reports of it not working are wrong. I just got confirmation that installing completely stock firmware and then installing the rom and the 00modified stock apns and blobs should work on Sprint/Boost just fine. They don't need to be separated out.
So after a few days of going step by step from the instructions and trying every thing else I could think of nothing works to get working lte... Even the 1x and 3g were spotty I'm on Virgin Mobile and if any one needs any files to help get the lte working let me know .....I know that after flashing the blobs and other files it says on lte but refuses to connect
After flashing both zips I get 1 X and all my APN settings are erased when I flash just the blobs I can get a solid 3-g and I have all my APN settings but still can't get LTE no matter what I put
Well i finally managed to get lte but working on trying to get mms
neojpl said:
After flashing both zips I get 1 X and all my APN settings are erased when I flash just the blobs I can get a solid 3-g and I have all my APN settings but still can't get LTE no matter what I put
Well i finally managed to get lte but working on trying to get mms
Click to expand...
Click to collapse
How did you get lte to work?
frederickrl said:
How did you get lte to work?
Click to expand...
Click to collapse
So far I've been able to get LTE and MMS working on only the Android ice cold project ROM. I flashed the Boost APN zip and the blob zip. Then I created a boost APN setting. I got these settings from a couple of guys on XDA who helped me out. Just follow the screenshots. hope this helps
Hi @SeanStar, I just wanted to touch base with you to let you know, despite my persistence, Motorola Mobility has declined to grant me access to carrier specific manifests on the perry xt1766, citing that "disclosure of such documentation would potentially violate contractual clauses regarding internal security protocols...between Lenovo, Motorola Mobility, and mvno subsidiaries of Sprint..." So on and so forth, etcetera, etcetera. Ironically I had another request denied last week for access to blankflash files for certain Motorola devices, which could be used to unbrick devices using Qualcomm's emergency recovery mode. The company is getting super tight on such info. They had no problem releasing the same manifests back in 2016 for the xr1526 surnia Moto E LTE. Interestingly, both of my recent requests were denied directly by Motorola Mobility's Office of General Counsel. The lawdogs themselves told me no.
neojpl said:
So far I've been able to get LTE and MMS working on only the Android ice cold project ROM. I flashed the Boost APN zip and the blob zip. Then I created a boost APN setting. I got these settings from a couple of guys on XDA who helped me out. Just follow the screenshots. hope this helps
Click to expand...
Click to collapse
I LOVE YOU!!! THANK YOU SO MUCH! I didn't attempt to this I installed this ROM and it's amazing, everything I may want from a custom rom is here, and the settings worked BEUTIFULLY, I can't tell you how much I appreciate this!
frederickrl said:
I LOVE YOU!!! THANK YOU SO MUCH! I didn't attempt to this I installed this ROM and it's amazing, everything I may want from a custom rom is here, and the settings worked BEUTIFULLY, I can't tell you how much I appreciate this!
Click to expand...
Click to collapse
No problem bro! everything I've learned and continue to learn has been on this site, so if I can help anybody here, with my limited knowledge base, awesome! you're very welcome ?
neojpl said:
So far I've been able to get LTE and MMS working on only the Android ice cold project ROM. I flashed the Boost APN zip and the blob zip. Then I created a boost APN setting. I got these settings from a couple of guys on XDA who helped me out. Just follow the screenshots. hope this helps
Click to expand...
Click to collapse
worked absolutely great.
Thexmastermind said:
worked absolutely great.
Click to expand...
Click to collapse
Cool! I'm happy to help
I found a link to a VM apn fix,
https://forum.xda-developers.com/devdb/project/?id=21002#downloads
Idk if this helps I'm about to try it
bakerd62 said:
I found a link to a VM apn fix,
https://forum.xda-developers.com/devdb/project/?id=21002#downloads
Idk if this helps I'm about to try it
Click to expand...
Click to collapse
I don't know where that came from. But it doesn't have blobs in it. What thread did that link come from?
I have the right one for virgin mobile if you want it. Lte, MMS, all of it works.
Honestly I searched VM APK fix for Android 7.0, and that was the top link to the XDA search tab
---------- Post added at 03:20 AM ---------- Previous post was at 03:18 AM ----------
But that would be great if you could give me the fix
bakerd62 said:
Honestly I searched VM APK fix for Android 7.0, and that was the top link to the XDA search tab
---------- Post added at 03:20 AM ---------- Previous post was at 03:18 AM ----------
But that would be great if you could give me the fix
Click to expand...
Click to collapse
I have one for virgin mobile that worked for me on aokp and aicp. Haven't tested others. I did not make it. One of the members in the telegram group did. Not sure what his xda username is. I'll find out and give credit.
madbat99 said:
I have one for virgin mobile that worked for me on aokp and aicp. Haven't tested others. I did not make it. One of the members in the telegram group did. Not sure what his xda username is. I'll find out and give credit.
Click to expand...
Click to collapse
Pretty sure it was @PimpMy5Ton
I cannot for the life of me....find stock firmware for the Moto E 2015 LTE XT1526 model anywhere. Can some one point me to same? I am running official Lineage OS 14.1 nightlies and not having LTE is a reall deal breaker.