Related
Q&A for [RECOVERY][nozomi] TWRP 2.8.5.0 touch recovery [2015-02-12]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][nozomi] TWRP 2.8.5.0 touch recovery [2015-02-12]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
locked bootloader
m1st3r1 said:
for cwm, there is cwm (and twrp also) for locked bootloader, but it cant flash any kernel (due to locked bootloader). in summary you stuck with stock kernel (that can only be flashed with flashtool or similar tools (if any ) with locked bootloader.
Click to expand...
Click to collapse
Sorry, I'm a bit beginner...
Does this mean that
1. if I use the procedure on page http://teamw.in/project/twrp2/144 in section Download - Stock Kernel:
2. then I can install any ROMs? For example this one? http://forum.xda-developers.com/xperia-s/s-development/rom-naosprom-xperia-s-t2958516
?
Mickey8881 said:
Sorry, I'm a bit beginner...
Does this mean that
1. if I use the procedure on page http://teamw.in/project/twrp2/144 in section Download - Stock Kernel:
2. then I can install any ROMs? For example this one? http://forum.xda-developers.com/xperia-s/s-development/rom-naosprom-xperia-s-t2958516
?
Click to expand...
Click to collapse
Flashing TWRP would require unlocked bootloader. First unlock Your bootloader, then follow the procedure from here.
From Your other post, it turns out You cannot unlock bootloader, so You can flash only sock based ROM's which work on Stock kernel.
Why is there no version 2.8.6.0 for Xperia S?
Hello guys,
I'm just download and install TWRP manager from google play and i'm trying to install the recovery. I'm choosing device name as LT26i but no recovery file is detected.
If i choose device name as "nozomi" i can find everything but my original device name is LT26i.
What to do? Are you suggest to try with nozomi and install the recovery?
Captainlag said:
Hello guys,
I'm just download and install TWRP manager from google play and i'm trying to install the recovery. I'm choosing device name as LT26i but no recovery file is detected.
If i choose device name as "nozomi" i can find everything but my original device name is LT26i.
What to do? Are you suggest to try with nozomi and install the recovery?
Click to expand...
Click to collapse
Nozomi is the code name for LT26i/LT26ii, so You can use it with no problems.
Unable to recovery
I can't flash any recovery file !!!
While I'm trying to install it returns this:
Something is wrong
------------------------
Flashing recovery was
unsuccessful.Either you already
have this recovery installed or
another error has occured.Would
you like to attempt rebooting to
recovery now?
NO YES
Captainlag said:
I can't flash any recovery file !!!
While I'm trying to install it returns this:
Something is wrong
------------------------
Flashing recovery was
unsuccessful.Either you already
have this recovery installed or
another error has occured.Would
you like to attempt rebooting to
recovery now?
NO YES
Click to expand...
Click to collapse
Which method are You following? Try the method from here.
Thank you for your help Mirhawk, but it doesn't work
Captainlag said:
Thank you for your help Mirhawk, but it doesn't work
Click to expand...
Click to collapse
What error are You getting?
Mirhawk said:
What error are You getting?
Click to expand...
Click to collapse
There is no error but I'm trying to reboot in recovery mode and it's immpossible
Captainlag said:
There is no error but I'm trying to reboot in recovery mode and it's immpossible
Click to expand...
Click to collapse
Hope You are pressing volume up button 2-3 times when Sony appears while booting the phone. Also, what ROM are You on?
Mirhawk said:
Hope You are pressing volume up button 2-3 times when Sony appears while booting the phone. Also, what ROM are You on?
Click to expand...
Click to collapse
Of course I'm pressing volume up button 2-3 times ....
My phone is on 6.2.B.1.96 stock with unlocked bootloader
Captainlag said:
Of course I'm pressing volume up button 2-3 times ....
My phone is on 6.2.B.1.96 stock with unlocked bootloader
Click to expand...
Click to collapse
I just wanted to clarify the first point since I have come across some people who didn't follow correct procedure. Glad You are doing it properly.
Ah yes, that is the problem. This method doesn't work on stock firmwares. Use the method from here to get recovery.
Mirhawk said:
I just wanted to clarify the first point since I have come across some people who didn't follow correct procedure. Glad You are doing it properly.
Ah yes, that is the problem. This method doesn't work on stock firmwares. Use the method from here to get recovery.
Click to expand...
Click to collapse
I suppose that i have to follow "method 2", right?
And what to do with the .zip file?
Captainlag said:
I suppose that i have to follow "method 2", right?
And what to do with the .zip file?
Click to expand...
Click to collapse
Method 1. You need recovery for method 2. If You have unlocked bootloader, You can simply flash the DoomKernel too. You can find it here. Use the blue "Download Now" button, and the file has .elf extension. You can flash it via flashtool, it consists of CWM and TWRP and works with stock ROM.
@Mirhawk: Many many thanks !!! :victory:
Finally , I have recovery with Doomkernel.
Thanks a lot and keep moding
I think I messed up my S
Hi
Trying to root my S and install nAOSProm I followed the instructions in the main thread. I successfully unlocked the bootloader and got the device rooted (SuperSU installed and updated in play store), but when attempting to use the TWRP manager to install TWRP I just got an error message that it wasn't successful. I then did this as I read earlier in this thread: fastboot flash boot 2.8.4.1.img. When I started the phone, it immediately boots into the TWRP but I can't get anywhere from there. Impossible to continue to the OS. When I connect it to the computer I just get an exclamation point in the device manager and I can't seem to find the correct drivers (I've installed the FlashTool Xperia Driver Pack). The phone worked perfectly in windows in both normal mode and fastboot previously. Since the phone doesn't have an external memory card, and since I can't transfer any files to it from Windows, I'm stuck in TWRP.
Is it bricked or can I get out of here?
nielsen81 said:
Hi
Trying to root my S and install nAOSProm I followed the instructions in the main thread. I successfully unlocked the bootloader and got the device rooted (SuperSU installed and updated in play store), but when attempting to use the TWRP manager to install TWRP I just got an error message that it wasn't successful. I then did this as I read earlier in this thread: fastboot flash boot 2.8.4.1.img. When I started the phone, it immediately boots into the TWRP but I can't get anywhere from there. Impossible to continue to the OS. When I connect it to the computer I just get an exclamation point in the device manager and I can't seem to find the correct drivers (I've installed the FlashTool Xperia Driver Pack). The phone worked perfectly in windows in both normal mode and fastboot previously. Since the phone doesn't have an external memory card, and since I can't transfer any files to it from Windows, I'm stuck in TWRP.
Is it bricked or can I get out of here?
Click to expand...
Click to collapse
Flash stock firmware ftf using flash mode in flashtool and then follow the instructions from here.
Or else:
Boot Your phone into recovery. Connect it to PC. Right click on the device in Device Manager, select update drivers, "browse my computer", then "let me pick from list" then select the driver similar to "Sony a0109 ADB drivers" (number may vary). Then You will be able connect to phone via adb. Then use following command to push the ROM and gapps to the phone internal memory:
Code:
adb push ROM.zip /sdcard/
adb push gapps.zip /sdcard/
This will copy the the ROM and gapps to phone which You can flash via recovery easily then.
worked perfectly! thanks for your time and help, much appreciated!
I happened to own a Acer Z220, I want to root it and get xposed framework for additional feature (a 3rd party rom is not expected at this stage:crying.
I find some good stuff from http://4pda.ru/forum/index.php?showtopic=674828, if someone speaks Russian, please ask if vm03 could update the twrp to the latest.
What I want is an updated version of TWRP.
ps: Since this unpopular phone has no excising Root+Recovery solution around, I decide to post what I have concluded so far.
-------------------------------------what I have concluded so far---------------------------------------------------------------
boot into recovery:
1st press and hold vol+ and power key
wait til vibret 2 times then release both key
and press vol - key wait 10 to 15sc
thanks trust4eve83
boot into fastboot
press and hold vol- and power key, wait 10 to 15sc
How to do a nand backup(without flashing a 3rd party recovery)
boot into fastboot
fastboot oem unlock
fastboot devices (make sure your device is there)
fastboot boot twrp.img (doing this also test if the 3rd party recovery will work for your device before you acturally flash it)
now you in twrp
Only working Root method:
I had tried many method, only KingRoot works.
Ps:
You might require a second try for a success root, and you "might" lost root access after restart.
How to flash a 3rd party recovery (after rooted)
$ su
# dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p25
assuming your recovery block is the same as mine, or try:
# dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
# reboot recovery
Ps:
Since I really dislike the root manager bundled with KingRoot, thus repeated some of the above steps to get clean system with TWRP+SuperSU.
----------------------------files to download-----------------------------------
USB drivers
usb drivers
or you can search for z220 here: http://us.acer.com/ac/en/US/content/drivers
Kernel Source Code (Android 5.0 Lollipop) - 20150612
http://global-download.acer.com/GDF... Z220&Step3=Z220&OS=ALL&LC=en&BC=ACER&SC=PA_6
TWRP v2.8.1, 3rd party recovery
thanks to vm03 http://4pda.ru/forum/index.php?showtopic=674828&st=0#entry43636281
TWRP v3.0.2 port by commandervadeo:
https://drive.google.com/open?id=0BxX4BigQAKE-a19ScXYwYzRxQjQ
Thanks to @commandervadeo
TWRP v2.8.1, stock recovery, stock boot download
https://www.dropbox.com/sh/ddmzouhm2i39ge9/AACaDJ3WzbHw2x1Zx4VZZ-DAa?dl=0
------------------Stock ROM and Tools----------------------------------
Dead: all roms: http://vache-android.com/?dir=hubicAcer/Z220
If someone speaks French, ask acer-club.fr what's happening.
AAP_GEN1 & AAP_CUS4: https://drive.google.com/drive/fold...VuX3BRbEpMS05RcTJJNnkzZTZ2TjNIU2FBNG1zXzhENTg
EMEA_GEN1 & PA_CA (Canadian):
http://masterandroids.com/cara-flashing-acer-z220-via-fastboot-tested/
Everything z220 related was stolen from this post, but the tutorial was well written in Indonesian.
Dead Links.
Your dropbox link is dead. Please fix. Also, by chance do you have a system.img for the Z220? KingRoot modified my install-recovery.sh and now I cannot OTA update. TIA!
Does anyone have a link for the TWRP? I really need it right now.
--PokeAcer
does anyone have cwm or twrp acer z220
Root it by kingroot. Change it with SuperSU . ( google kingroot to SuperSU) . The one in used terminal emulator. Now u have SuperSU installed
For custom recovery, i can't help u . However , u can use flashfire to flash xposed framework. Download xposed framework , and flash the zip file ( exposed framework) with flashfire. Don't check auto mount , just proceed . After that , scroll down to everRoot option, and check all box inside it. After u done , flash. Last , install xposed installer. and voila!
My advice : don't use xposed framework if u don't know what you are doing . If something gone wrong , reflash ur Acer with a stock ROM ( u can get it from S4trio blog )
Keep in mind that flashfire only working with SuperSU.
The TWRP image is gone (404), does anyone else have a copy?
PokeAcer said:
The TWRP image is gone (404), does anyone else have a copy?
Click to expand...
Click to collapse
dropbox link is fixed
dorissfirm99 said:
does anyone have cwm or twrp acer z220
Click to expand...
Click to collapse
dropbox link is fixed
PokeAcer said:
Does anyone have a link for the TWRP? I really need it right now.
Click to expand...
Click to collapse
dropbox link is fixed
glicious001 said:
Your dropbox link is dead. Please fix. Also, by chance do you have a system.img for the Z220? KingRoot modified my install-recovery.sh and now I cannot OTA update. TIA!
Click to expand...
Click to collapse
dropbox link is fixed, did I not say to do a nand backup
nightmareside said:
Root it by kingroot. Change it with SuperSU . ( google kingroot to SuperSU) . The one in used terminal emulator. Now u have SuperSU installed
For custom recovery, i can't help u . However , u can use flashfire to flash xposed framework. Download xposed framework , and flash the zip file ( exposed framework) with flashfire. Don't check auto mount , just proceed . After that , scroll down to everRoot option, and check all box inside it. After u done , flash. Last , install xposed installer. and voila!
My advice : don't use xposed framework if u don't know what you are doing . If something gone wrong , reflash ur Acer with a stock ROM ( u can get it from S4trio blog )
Keep in mind that flashfire only working with SuperSU.
Click to expand...
Click to collapse
there is a stock rom at S4trio blog? can't find it
Can u tell me step by step unlock bootloader and install twrp for my Acer Z220 via pc?
Stock ROM and Tools Acer Z220:
vache-android.***/?dir=hubicAcer/Z220
Change * to com
To flash via PC, select the Flash Image.
To flash via stock recovery, select SDs.
does anyone how to get the device to update? i've flashed the device complete stock, and it keeps having an error about partition size
commandervadeo said:
does anyone how to get the device to update? i've flashed the device complete stock, and it keeps having an error about partition size
Click to expand...
Click to collapse
So that is a legit stock rom....did you flashed the Canada rom? Can you upload the error image?
inonosa said:
So that is a legit stock rom....did you flashed the Canada rom? Can you upload the error image?
Click to expand...
Click to collapse
i reflashed it again, and it decided to work xd
what is the issue with us not being able to get a 3rd party rom? just wondering.
help me....
im adit build.prop and now stuck at acer logo(bootloop)
commandervadeo said:
what is the issue with us not being able to get a 3rd party rom? just wondering.
Click to expand...
Click to collapse
I got this phone for a very cheap price....
So, small user group....
Iman Haziq said:
help me....
im adit build.prop and now stuck at acer logo(bootloop)
Click to expand...
Click to collapse
assuming u did a nand backup, like I mentioned, then just restore the backup
inonosa said:
I got this phone for a very cheap price....
So, small user group....
assuming u did a nand backup, like I mentioned, then just restore the backup
Click to expand...
Click to collapse
damn okay, ill try to port over cm12/cm13 if i can okay?!?!?
I almost gave up until I found the your thread ..... I boot to TWRP and after that I backup data and flash stock rom (zip file) and .Finally restore data and it work.Thank for TWRP custom recovery .....
Thanks alot...
Can give me thanks....?
working twrp 3.0!!!
Working twrp 3.0 port by me! I was able to install super su 2.79 with it! https://drive.google.com/open?id=0BxX4BigQAKE-a19ScXYwYzRxQjQ *edit* was also able to flash it to my recovery partition!!!
failed to enter TRWP
weird,,,
coffemixer said:
failed to enter TRWP
Click to expand...
Click to collapse
thats weird, it works for me. Like both versions of TWRP...
Hello please help. So I unlocked bootloader, set up Google and finger scanning password. Flashed SuperSU and that's when everything went wrong. Got stuck on the boot logo. Any suggestions? I've read about using the Qualcomm driver method but I'm unsure if it'll work on a Mac? Any help ? I've used twrp to flash ROM no luck. Used stock recovery but adb doesn't detect my devices I guess I didn't enable USB debugging after unlocking the bootloader.
jasj0410 said:
Hello please help. So I unlocked bootloader, set up Google and finger scanning password. Flashed SuperSU and that's when everything went wrong. Got stuck on the boot logo. Any suggestions? I've read about using the Qualcomm driver method but I'm unsure if it'll work on a Mac? Any help ? I've used twrp to flash ROM no luck. Used stock recovery but adb doesn't detect my devices I guess I didn't enable USB debugging after unlocking the bootloader.
Click to expand...
Click to collapse
Flashing the stock firmware using TWRP should do it for you. Just perform a FULL WIPE (formatting all partitions) before flashing the rom and keep in mind that you need a modified TWRP version to flash Oxygen OS based roms. The official TWRP won't do it.
Can you explain what you mean by "formatting all partitions"?
I have a modified twrp recovery. When I click on wipe there is two options " advance wipe" and "format data" is the 2nd optioption the one your referring too as well? I flashed ROM.zip with the modified twrp without formatting data (I rather wait on your reply to be sure) and instead of getting stuck on the boot logo it is doing a bootloop now. Thanks for your assistance BTW.
jasj0410 said:
Can you explain what you mean by "formatting all partitions"?
I have a modified twrp recovery. When I click on wipe there is two options " advance wipe" and "format data" is the 2nd optioption the one your referring too as well? I flashed ROM.zip with the modified twrp without formatting data (I rather wait on your reply to be sure) and instead of getting stuck on the boot logo it is doing a bootloop now. Thanks for your assistance BTW.
Click to expand...
Click to collapse
Advanced Wipe
--> mark
"ART Cache"
"Cache"
"Data"
"Internal Storage"
"System"
--> swipe to wipe
If you don't get any errors
--> restart TWRP (Or you can't access the storage)
--> flash rom
Did that no luck. I'm trying to flash 3.2.7 anything tricky/specific I should be doing ?
I'm going to flash 3.2.6 tomorrow when I get near Wi-Fi and See what happens.
Should I be downloading "OTA zip" or" oxygenOS 3.2.6 full zip"
jasj0410 said:
Did that no luck. I'm trying to flash 3.2.7 anything tricky/specific I should be doing ?
I'm going to flash 3.2.6 tomorrow when I get near Wi-Fi and See what happens.
Should I be downloading "OTA zip" or" oxygenOS 3.2.6 full zip"
Click to expand...
Click to collapse
OTA = on the air update // for upgrading your android version e.g. OOS 3.2.6 --> 3.2.8 // NOT for solo installation!
You can either use OOS 3.2.6 or the very awesome Open Beta 7 (Don't be irritated because there is "OTA" in the filename, both are complete roms)
These are full roms officially from OnePlus.net and I'm pretty sure that they will work together with TWRP 3.0.2-22.
I suppose you simply used the wrong files. Could you tell me where you downloaded the files?
LS.xD said:
OTA = on the air update // for upgrading your android version e.g. OOS 3.2.6 --> 3.2.8 // NOT for solo installation!
You can either use OOS 3.2.6 or the very awesome Open Beta 7 (Don't be irritated because there is "OTA" in the filename, both are complete roms)
These are full roms officially from OnePlus.net and I'm pretty sure that they will work together with TWRP 3.0.2-22.
I suppose you simply used the wrong files. Could you tell me where you downloaded the files?
Click to expand...
Click to collapse
i literally downloaded those files you linked to me and still no luck. it shouldn't be a problem that I'm using android file manager to transfer the rom over to my phone right? I'm going to wipe everything and go to stock recovery and use adb push to flash stock rom. any other suggestions you got?
Anyone please? I've rooted moto g 1st and 4th grn so it's not the fact that I'm being a complete noob. I've downloaded the modified twrp flashed 3.2.6, beta 7 and cyanogenmod. No luck on anything.
jasj0410 said:
Anyone please? I've rooted moto g 1st and 4th grn so it's not the fact that I'm being a complete noob. I've downloaded the modified twrp flashed 3.2.6, beta 7 and cyanogenmod. No luck on anything.
Click to expand...
Click to collapse
Use this guide and try both methods.
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
tnsmani said:
Use this guide and try both methods.
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
thanks for your reply. i managed to fix it. the other guy's link for a modified twrp didn't work (the custom recovery not the link) so i downloaded another and ended up installing beta 7 which worked. for future reference the link (mega unbrick) you provided me would that work with a mac?
jasj0410 said:
thanks for your reply. i managed to fix it. the other guy's link for a modified twrp didn't work (the custom recovery not the link) so i downloaded another and ended up installing beta 7 which worked. for future reference the link (mega unbrick) you provided me would that work with a mac?
Click to expand...
Click to collapse
I doubt that though there is no specific info on this .
Hello everyone !
I have a xiaomi Mi A2 lite for few days, based on Pie 9.0. I decided to install a custom rom on it (resurrection or lineage OS16) so I unlocked the bootloader, rooted properly the phone, and then tryed to use TWRP to install a new ROM.
Unfortunatly, I never succeeded to do so: each time I tried, the installation failed, showing an "error 1".
Trying to fix this issue, I unfortunatly deleted the OS of my phone, and still can't install a new ROM. I tried to flash a stock ROM from xiaomi site, following this thread: https://forum.xda-developers.com/mi-a2-lite/help/os-image-please-help-t3885625/page3 , but Mi flash tool doesn't work well on my computer (it's still showing an "unhandled exception" error, whatever I'm trying to do.
Here we are, I've got two problems and I don't really know what to do, despite my searching on the web. My phone is now unusable (I can access to the TWRP recovery, can use fastboot, but that's all..)
Do you have any advice to clean up all the mess I did ?
Thank you a lot for your time !
Download the stock rom (preferably 10.0.3.0) extract it along with adb and fastboot into the same folder, install the drivers, boot into fastboot, connect it to PC and run flash_all.bat and you should be back onto stock rom! If you want to install a custom rom follow this: github. com/tkchn/daisyinstall/blob/master/README.md
Armandpewpew said:
Hello everyone !
I have a xiaomi Mi A2 lite for few days, based on Pie 9.0. I decided to install a custom rom on it (resurrection or lineage OS16) so I unlocked the bootloader, rooted properly the phone, and then tryed to use TWRP to install a new ROM.
Unfortunatly, I never succeeded to do so: each time I tried, the installation failed, showing an "error 1".
Trying to fix this issue, I unfortunatly deleted the OS of my phone, and still can't install a new ROM. I tried to flash a stock ROM from xiaomi site, following this thread: https://forum.xda-developers.com/mi-a2-lite/help/os-image-please-help-t3885625/page3 , but Mi flash tool doesn't work well on my computer (it's still showing an "unhandled exception" error, whatever I'm trying to do.
Here we are, I've got two problems and I don't really know what to do, despite my searching on the web. My phone is now unusable (I can access to the TWRP recovery, can use fastboot, but that's all..)
Do you have any advice to clean up all the mess I did ?
Thank you a lot for your time !
Click to expand...
Click to collapse
Are you sure that you followed the procedure to install a custom rom? Can you tell which steps did you do? And about the error of MiFlash you can try with other version so there are many versions uploaded that don´t match well.
If you can't use the fastboot u need to force EDL Mode.. The best and simple way to install the ROM stock is using MI Flash Tool, u can find a tutorial in here or in YouTube it's easy if you follow all the steps! Good Luck
Armandpewpew said:
Hello everyone !
I have a xiaomi Mi A2 lite for few days, based on Pie 9.0. I decided to install a custom rom on it (resurrection or lineage OS16) so I unlocked the bootloader, rooted properly the phone, and then tryed to use TWRP to install a new ROM.
Unfortunatly, I never succeeded to do so: each time I tried, the installation failed, showing an "error 1".
Trying to fix this issue, I unfortunatly deleted the OS of my phone, and still can't install a new ROM. I tried to flash a stock ROM from xiaomi site, following this thread: https://forum.xda-developers.com/mi-a2-lite/help/os-image-please-help-t3885625/page3 , but Mi flash tool doesn't work well on my computer (it's still showing an "unhandled exception" error, whatever I'm trying to do.
Here we are, I've got two problems and I don't really know what to do, despite my searching on the web. My phone is now unusable (I can access to the TWRP recovery, can use fastboot, but that's all..)
Do you have any advice to clean up all the mess I did ?
Thank you a lot for your time !
Click to expand...
Click to collapse
The first problem with TWRP Error code :1 - the problem is with twrp itself- install a different version ,i am using 3.3.1-0 by offain ,i've had this error on allmost every twrp besides the offain versions and dees_troy.
The second problem : with the deleted os : you have 2 options :
1. Download the latest MiFlash from the official site and install it ,on the top left of the screen, you can see Drivers button ,click on install. Then navigate to stock rom folder ,go in fastboot mode on your device and connect to PC ,hit refresh ,then flash.
2. If this doesn't help ,custom rom is an option ,there are 2 links
https://daisyfiles.pp.ua/Firmwares/MIUI/ - from here download miui version Golden Master 1.1
https://forum.xda-developers.com/mi...ol-one-driversunlocktwrpfactory-t3866191/amp/ - download this all in one tool, you can lock ,relock ,install twrp recovery ,custom roms ,it is perfect!
For the installation - put the rom on sd card ,install twrp version that doesnt give Error 1 code ,then format data,system,cache,dalvik/art ,internal storage.
And the last thing - install the ROM zip and try MIUI 10.5 This is the best temporary solution,until you set MiFlash the right way ,or on another PC
Hello !
First of all, thank you very much for your quick and complete answer
I finally succedeed to flash a stock ROM on the phone, using Mi flash tool, so I'm back on track ! About the "unhandled exception" error, i've just fixed it by creating a "log folder" in the MI flash tool folder, it's good to know, maybe It will help someone else one day ^^
When I tried to install a custom ROM last time, I used the 3.3.1 version of TWRP. Because it didn't work (error 1), I used the 3.3.0 one and I had the same exact error code. Do you think I should try older versions one by one ?
I'm going to unlock it and root it right now,
Thank you again,
Arnaud
PS: Oh, last thing, when TWRP recovery will be properly installed on my phone, shall I root it by using magisk ?
Armandpewpew said:
I'm going to unlock it and root it right now,
Click to expand...
Click to collapse
Updating my situation:
So I successfully installed TWRP 3.3.3-0 on the phone and did a huge backup to avoid deleting my OS again.
Now I'm confused about what to do: I did understand that I need to root my phone (using magisk) BEFORE trying to install a custom ROM, but I'm really not sure about it, should I ?
I tried, and it still doesn't work (error1), I noticed that error 1 shows some interresting details:
"error installing zip file '/sdcard/TWRP/RR-P-v7.0.2-20190907-daisy-Official.zip' "
The point is I do not have any sd card in my phone (for the moment), is it possible that it can't install the ROM because TWRP is trying to install the ROM on an non-existing storage ? I will try to get an sdcard somewhere to check how it behave.
Thank you again,
Armandpewpew said:
Updating my situation:
So I successfully installed TWRP 3.3.3-0 on the phone and did a huge backup to avoid deleting my OS again.
Now I'm confused about what to do: I did understand that I need to root my phone (using magisk) BEFORE trying to install a custom ROM, but I'm really not sure about it, should I ?
I tried, and it still doesn't work (error1), I noticed that error 1 shows some interresting details:
"error installing zip file '/sdcard/TWRP/RR-P-v7.0.2-20190907-daisy-Official.zip' "
The point is I do not have any sd card in my phone (for the moment), is it possible that it can't install the ROM because TWRP is trying to install the ROM on an non-existing storage ? I will try to get an sdcard somewhere to check how it behave.
Thank you again,
Click to expand...
Click to collapse
Nope ,as i said ,error code is with the version of twrp ,i am using TWRP 3.3.3-1 dees_troy ,i've had the same problem as yours ,i was trying to flash from internal memory ,tried flash from sd card,the problem was the same.So i have tried 3 or 4 different versions ,3.3.3-0 (2 different versions ) gave me error 7 ,another 3.3.3-0 destroyed my system image ,3.2.3-0 don't show my sd card in twrp .So download TWRP 3.3.3-1by dees_troy ,i am using it right now ,but i am using the all in one tool ,that i have mentioned in my previous post - no errors ,no mistakes
Okay, I will try the TWRP 3.2.3 then, this is the only one I didn't try
What about magisk ?
SubwayChamp said:
Are you sure that you followed the procedure to install a custom rom? Can you tell which steps did you do? And about the error of MiFlash you can try with other version so there are many versions uploaded that don´t match well.
Click to expand...
Click to collapse
Hi !
I basically followed the procedure here: https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/
And then https://gmtechweb.com/resurrection-remix-v7-galaxy-s6/
Thanks for your time
Error 1 is for use official twrp, please read before, only twrp for custom ROMs is offain's twrp 3.3-1.0
Os_Herdz said:
Error 1 is for use official twrp, please read before, only twrp for custom ROMs is offain's twrp 3.3-1.0
Click to expand...
Click to collapse
Sorry I didn't undestand that at all
I will follow the ghitub step by step by using all pieces they provide. Only one thing, they give the Offain TWRP 3.3.0-0. Do you know where I can find the 3.3.3-1 you're all talking about ?
Armandpewpew said:
Hi !
I basically followed the procedure here: https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/
And then https://gmtechweb.com/resurrection-remix-v7-galaxy-s6/
Thanks for your time
Click to expand...
Click to collapse
The first link did take me to any place and the second is for other completely different device, I don´t know why following a procedure for a device with a different scheme partition.
It could be that previously you must have a determined firmware as base before to flash any custom rom, in this case you have to flash it using MiFlash tool checking on "clean all" option (preferably)
The moves basically are these:
1.- Boot to twrp-daisy-3.3.1-0-offain.img using fastboot (just boot to, don´t flash it)
2.- Wipe system, dalvik/cache, data from the previous.
3.- In the case is indicated by developer Format data.
4.- Flash the desired rom.
5.- Flash the twrp-daisy-3.3.1-0-offain installer zip (it´s not the same that the boot image) you can use adb sideload or previously move the file to your external SDCard or then to format data transfer the file to your internal SDCard.
6.- Go to the main menu on TWRP and in reboot options change to the other slot from A to B and viceversa, then to switch reboot again to recovery.
7.- Now flash the Disable-Force-Encryption.
8.- In the case (most likely you want) Flash the GApps and flash Magisk at last, then reboot normally.
The links for TWRP are these:
https://androidfilehost.com/?fid=6006931924117887098
https://androidfilehost.com/?fid=6006931924117887097
Hi !
They are too many flashing procedures everywhere, it's a giant mess and it's really hard to find the proper one when we don't use to it
Anyway, I finally succeeded to properly install a custom ROM on my phone by using this procedure: https://github.com/tkchn/daisyinstall/blob/master/README.md
Everything is now working well, thank you all for your help, you saved my day
HELP! I am getting the same error message, i know what I need to do, download the Offain version of TWRP, but none of the links work! Android File Host DOES NOT WORK for some reason. Can someone upload these files somewhere else for me? Please? I have no other way of getting these files, they don't exist anywhere else on the web... I have already tried every other available versions of TWRP and am getting the same error message (1) as OP.
Tipsymario said:
Download the stock rom (preferably 10.0.3.0) extract it along with adb and fastboot into the same folder, install the drivers, boot into fastboot, connect it to PC and run flash_all.bat and you should be back onto stock rom! If you want to install a custom rom follow this: github. com/tkchn/daisyinstall/blob/master/README.md
Click to expand...
Click to collapse
hey sir , i download 10.0.13 sinc emy internet sucks i can't just go and download another 1.5go of 10.0.3.0 , the probleme is i can't find flash_all.bat even miflash and all in one tool say they can't find flash_all.bat can u help me here where can i find it or build it ?
Alecjasonn said:
HELP! I am getting the same error message, i know what I need to do, download the Offain version of TWRP, but none of the links work! Android File Host DOES NOT WORK for some reason. Can someone upload these files somewhere else for me? Please? I have no other way of getting these files, they don't exist anywhere else on the web... I have already tried every other available versions of TWRP and am getting the same error message (1) as OP.
Click to expand...
Click to collapse
Try using this link if AFH is not working : https://daisyfiles.pp.ua/TWRP/
Sorry if this has been posted but is it possible to switch to a custom ROM when running Android 10 (v11.0.4.0)?
If you have adb installed on your pc you only need these 2 for twrp, there might be a newer versions but they work fine for me.
img: (to boot from adb)
https://drive.google.com/open?id=1AwtLrERrSEql-ihhiAWPUh6DoXSWhZb9
zip: (to flash in twrp)
https://drive.google.com/open?id=1whcfSqbcNjmqXdnysu25KVX9PyX4mb-P
andraslate said:
If you have adb installed on your pc you only need these 2 for twrp, there might be a newer versions but they work fine for me.
img: (to boot from adb)
https://drive.google.com/open?id=1AwtLrERrSEql-ihhiAWPUh6DoXSWhZb9
zip: (to flash in twrp)
https://drive.google.com/open?id=1whcfSqbcNjmqXdnysu25KVX9PyX4mb-P
Click to expand...
Click to collapse
So should I just use MiFlash to boot each image file individually? Then I assume once TWRP is in I can flash as usual?
RensoreK said:
So should I just use MiFlash to boot each image file individually? Then I assume once TWRP is in I can flash as usual?
Click to expand...
Click to collapse
Never used MIflash so I don't know how that works. I thought it's only to install stock rom, but I might be wrong. Use ADB to install custom ROMs
With the img file you can boot to twrp with ADB command. Then after installing a custom rom use the zip file to flash it .
I am unable to find any adaptable guide anywhere. Tried using XiaomiTools v2 and was unable to flash because my device (even though has a Mi account created) cannot be linked to my device, I have no where to link it on AndroidOne Global version on Android 10. No clue how you guys are doing this. I've flashed phones since Blackberry models here on XDA and this is the only device instructions are halfed.
RensoreK said:
I am unable to find any adaptable guide anywhere. Tried using XiaomiTools v2 and was unable to flash because my device (even though has a Mi account created) cannot be linked to my device, I have no where to link it on AndroidOne Global version on Android 10. No clue how you guys are doing this. I've flashed phones since Blackberry models here on XDA and this is the only device instructions are halfed.
Click to expand...
Click to collapse
find dee_stroy twrp img one. use adb (platfom-tool), then turn off your device and make it go to bootloader state (fastboot). on platform-tool open cmd. (just type on folder path cmd) then type fastboot boot (the name twrp).img and you are set to go. if you wanted to install twrp permanently, after u boot twrp via bootloader, copy the twrp zip to your device and install it. the procedure is all; the same for every rom tho. nothing has changed
Can anybody help me installing this?? .. I had twrp before I installed havoc is 3.6 (android 10) but i didnt install twrp now I can't install twrp please anybody help me
Autokiddo said:
Can anybody help me installing this?? .. I had twrp before I installed havoc is 3.6 (android 10) but i didnt install twrp now I can't install twrp please anybody help me
Click to expand...
Click to collapse
fastboot boot trwp.img
Use TWRP to install twrp.zip
If you were rooted...
fastboot boot patched.img
Use Magisk manager to install (direct)
install twrp
hi, could someone kindly give me a step by step guide to install the twrp recovery?
i have the build QKQ1.191002.002.V11.0.10.0QDLMIXM.
thank you.
InsectWarfare said:
hi, could someone kindly give me a step by step guide to install the twrp recovery?
i have the build QKQ1.191002.002.V11.0.10.0QDLMIXM.
thank you.
Click to expand...
Click to collapse
Nothing?
Inviato dal mio Mi A2 Lite utilizzando Tapatalk
InsectWarfare said:
hi, could someone kindly give me a step by step guide to install the twrp recovery?
i have the build QKQ1.191002.002.V11.0.10.0QDLMIXM.
thank you.
Click to expand...
Click to collapse
This has been documented elsewhere...
The short version is
1) fastboot boot twrp.img
2) adb push twrp-installer.zip /sdcard
3) use TWRP to install the zip
If you also want Magisk you have to install that again. Flash from TWRP or follow the usual process.