Related
I just bought this device a week and I haven't even rooted I wanted to install Cyanogenmode and follow through the instructions and flashed TWRP through fastboot commands from Windows7 using Minimal ADB and Fastboot [8-28-15].
I got the TWRP recovery but I am not sure what have I done wrong, when I am in the TWRP recovery, it does not show any partitions so I am unable to install any ROM on it.
I have also tried to use this thread: http://forum.xda-developers.com/nexus-7-2013/nexus-7-2013-qa/mount-recovery-t3064562 when I flash the given recovery from fastboot commands from this thread, the recovery get stuck with bootloop. So then I restored it back to the original TWRP 2.8.7.0.
So at this point now I can only access bootloader and the recovery which does not show partitions.
At this point Is it possible for me to go back to the stock ROM somehow? Please advice. Otherwise I might be able to return it because I have only bought it few days ago.
SOLVED: To get TWRP to work, I flashed the original stock ROM from here https://developers.google.com/androi...s/images?hl=en using adb. I then flashed this TWRP multirom https://s.basketbuild.com/filedl/dev...o_20150630.img
This allowed TWRP to work.
Thanks to Batfink33 and lynnux
You can follow this guide to flash the newest factory image: http://androidforums.com/threads/guide-how-to-flash-a-nexus-factory-image-manually.706533/. You should just download the latest factory image from: https://developers.google.com/android/nexus/images?hl=en the one in the guide is outdated.
Join the club, I did the same thing you did with the same results(even flashing the multirom twrp after flashing the regular one, and getting the recovery bootloop). I happened to find the same instructions theminikiller posted above after pulling my hair out trying to figure out what went wrong.
This post http://forum.xda-developers.com/showpost.php?p=62275723&postcount=558 explains what's going on. If you do the above and then flash the multirom twrp it should work fine, it did for me. I also reformatted system in adb after erasing everything, not sure if that was necessary or not.
lynnux said:
Join the club, I did the same thing you did with the same results(even flashing the multirom twrp after flashing the regular one, and getting the recovery bootloop). I happened to find the same instructions theminikiller posted above after pulling my hair out trying to figure out what went wrong.
This post http://forum.xda-developers.com/showpost.php?p=62275723&postcount=558 explains what's going on. If you do the above and then flash the multirom twrp it should work fine, it did for me. I also reformatted system in adb after erasing everything, not sure if that was necessary or not.
Click to expand...
Click to collapse
Did the multirom TWRP work for you? I get a bootloop in TWRP when I flash that multirom TWRP posted.
Batfink33 said:
Did the multirom TWRP work for you? I get a bootloop in TWRP when I flash that multirom TWRP posted.
Click to expand...
Click to collapse
It worked for me, but only after erasing everything via adb and reflashing all the stock images. I got the bootloop when I flashed the regular twrp first, then the multirom twrp. Also, I'm using the most recent multirom twrp from June (I believe).
lynnux said:
It worked for me, but only after erasing everything via adb and reflashing all the stock images. I got the bootloop when I flashed the regular twrp first, then the multirom twrp. Also, I'm using the most recent multirom twrp from June (I believe).
Click to expand...
Click to collapse
Yay, it works for me now. I had to install the stock ROM using adb then flash the multirom TWRP. Thanks!
Batfink33 said:
Yay, it works for me now. I had to install the stock ROM using adb then flash the multirom TWRP. Thanks!
Click to expand...
Click to collapse
Thanks for your replies here. Could you please give me the link to the multiroom Recovery that had worked for you? Also did you installed Cynageon mode after getting the mutliroom TWRP working? Please advice
a4abbas said:
Thanks for your replies here. Could you please give me the link to the multiroom Recovery that had worked for you? Also did you installed Cynageon mode after getting the mutliroom TWRP working? Please advice
Click to expand...
Click to collapse
To get TWRP to work, I flashed the original stock ROM from here https://developers.google.com/android/nexus/images?hl=en using adb. I then flashed this TWRP multirom https://s.basketbuild.com/filedl/de...//multirom/flo/TWRP_multirom_flo_20150630.img
This allowed TWRP to work.
Batfink33 said:
To get TWRP to work, I flashed the original stock ROM from here https://developers.google.com/android/nexus/images?hl=en using adb. I then flashed this TWRP multirom https://s.basketbuild.com/filedl/de...//multirom/flo/TWRP_multirom_flo_20150630.img
This allowed TWRP to work.
Click to expand...
Click to collapse
Is it required to enable Developer options at some point of flashing it successfully? I am in China and here the google is blocked i bought this tablet and I can not get through the first screen that ask me to connect the wifi (no option to skip it unless i connect to wifi) then after loading it gets error message that it is failed to connect to internet. So just understand that I can not goto the device options right now. So is it possible to flash cynagonmode rom without enabling developer option. Please advice
a4abbas said:
Is it required to enable Developer options at some point of flashing it successfully? I am in China and here the google is blocked i bought this tablet and I can not get through the first screen that ask me to connect the wifi (no option to skip it unless i connect to wifi) then after loading it gets error message that it is failed to connect to internet. So just understand that I can not goto the device options right now. So is it possible to flash cynagonmode rom without enabling developer option. Please advice
Click to expand...
Click to collapse
No, it's not required. Just turn off your device. Then to boot into the bootloader hold volume down + power button until it's done booting. From there you can follow other guides to unlock the bootloader and installing custom recovery and Rom's.
theminikiller said:
No, it's not required. Just turn off your device. Then to boot into the bootloader hold volume down + power button until it's done booting. From there you can follow other guides to unlock the bootloader and installing custom recovery and Rom's.
Click to expand...
Click to collapse
I have tried to do it. But the device is not being recognized with the ADB tools on my PC. Any ideas? Could it be because of the USB debugging option?
a4abbas said:
I have tried to do it. But the device is not being recognized with the ADB tools on my PC. Any ideas? Could it be because of the USB debugging option?
Click to expand...
Click to collapse
When you are in the bootloader it doesn't matter if you have USB debugging enabled or not. It could be a problem with your driver's.
theminikiller said:
When you are in the bootloader it doesn't matter if you have USB debugging enabled or not. It could be a problem with your driver's.
Click to expand...
Click to collapse
You must be right, it make sense.
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Did you follow the instructions to flash TWRP using Odin?
olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear
bump
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?
N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.
N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post
aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
I was the same predicament as you. I finally took the plunge and now I have Nougat running on my OP3. Here is what I did :
Start: OOS 3.2.8 w/ custom kernel and modified TWRP
1. Flash stock recovery (Google for a forum post in the OP3 forums on downloading the stock recovery and flash it through fastboot)
2. Reboot and let 3.2.8 start
3. Download Snap VPN and change the country to Canada. You will be prompted for the system update.
4. Let the update download (~1 GB)
5. Install the update. You may see an error of the installation may fail as your phone is rooted. Ignore and go ahead.
6. The installer will now boot to stock recovery and reboot with Nougat. All settings and apps will be maintained
The only catch is that you may have ext4 instead of f2fs. I am okay with it for now... But your mileage may vary
All the best!
Edit : Nougat running on my op3.
abhibnl said:
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
Click to expand...
Click to collapse
Are you rooted? Are you encrypted? What file systems are you using for your partitions? You're not giving full information. Why is formatting not an option if it'll give you the results you want?
To get to F2fs (I do recommend it)
Take a backup of your Data partition. , copy it to your pc with "adb pull /sdcard/Twrp/whatever".
Now go to Twrp>Wipe>Advanced select data and click on change file system. Change it to F2fs. Now restore your backup (Reader the guide all info is there). Profit!
anshulajain said:
I was the same predicament as you. I finally took the plunge and now I have Nougat running on my OP3. Here is what I did :
Start: OOS 3.2.8 w/ custom kernel and modified TWRP
1. Flash stock recovery (Google for a forum post in the OP3 forums on downloading the stock recovery and flash it through fastboot)
2. Reboot and let 3.2.8 start
3. Download Snap VPN and change the country to Canada. You will be prompted for the system update.
4. Let the update download (~1 GB)
5. Install the update. You may see an error of the installation may fail as your phone is rooted. Ignore and go ahead.
6. The installer will now boot to stock recovery and reboot with Nougat. All settings and apps will be maintained
The only catch is that you may have ext4 instead of f2fs. I am okay with it for now... But your mileage may vary
All the best!
Click to expand...
Click to collapse
I don't have any issues with ext4, infact i do feel ext4 is more stable than f2fs so file system is my last concern. Thanks for your method, but then how did u root again? Installing nougat is fine but what after that? I have read that you can't use modified twrp without formatting internal memory first, as it'll show you the pin issue. Let me know how do you propose a safe method to achieve root.
Renosh said:
Are you rooted? Are you encrypted? What file systems are you using for your partitions? You're not giving full information. Why is formatting not an option if it'll give you the results you want?
Click to expand...
Click to collapse
Yes i am encrypted, rooted, stock OOS 3.2.8 + Franco kernel. Official TWRP(not modified). I am using ext4, never used f2fs at all. The time to backup data and then to restore it all back is the reason formatting is not an "preferred" option for me. I can do it, but i would have to wait until i find enough time to do the whole process. I am in a full time job, so i hope you would understand.
Puddi_Puddin said:
To get to F2fs (I do recommend it)
Take a backup of your Data partition. , copy it to your pc with "adb pull /sdcard/Twrp/whatever".
Now go to Twrp>Wipe>Advanced select data and click on change file system. Change it to F2fs. Now restore your backup (Reader the guide all info is there). Profit!
Click to expand...
Click to collapse
Well this again defeats the purpose of my original question, but thanks mate. I would definitely read the guide if decide to switch to f2fs.
@abhibnl. BTW your encrypted. So the modified TWRP won't work.
How to fix:
Wipe Userdata with Fastboot / fastboot erase UserData
Boot into Twrp modified twrp.
Flash OOS 4.0 flash SuperSU and let it boot
You should be decrypted DO NOT install a boot password since you will be encrypted again.
I haven't rooted my phone again. My only reason to root is to install Adaway to block all ads. With DNS66 and Adguard, I have little incentive to root my stock nougat install.
Edit : I had encryption during 3.2.8 and it carried over to 4.0
Puddi_Puddin said:
@abhibnl. BTW your encrypted. So the modified TWRP won't work.
How to fix:
Wipe Userdata with Fastboot / fastboot erase UserData
Boot into Twrp modified twrp.
Flash OOS 4.0 flash SuperSU and let it boot
You should be decrypted DO NOT install a boot password since you will be encrypted again.
Click to expand...
Click to collapse
Thanks a lot for informing me mate. I really don't want to decrypt my storage as of now. I guess flashing stock recovery is the only solution now. Will hope someone would pick up the twrp and update it.
anshulajain said:
I haven't rooted my phone again. My only reason to root is to install Adaway to block all ads. With DNS66 and Adguard, I have little incentive to root my stock nougat install.
Edit : I had encryption during 3.2.8 and it carried over to 4.0
Click to expand...
Click to collapse
Seems like stock recovery is the best way as of now. Seems like I'll have to love without root until someone updates twrp to support encrypted storage.
I haven't updated to Nougat yet, but I looked over Chainfire's SuperSU changelog and its installation script and both of them confirm that from March installing SuperSU prevents forced encryption. Also many guides suggest installing it as way for disabling forced encryption. Of course you have to flash SuperSU just after flashing ROM, before booting the system.
abhibnl said:
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
Click to expand...
Click to collapse
Very simple indeed...
1. Switch on wifi
2. Download OTA and click install whem finished
3. Once installation completed, flash twrp .28 and latest su
4. Reboot and ignore any errors, youwill beup and running fine...
Zielony360 said:
I haven't updated to Nougat yet, but I looked over Chainfire's SuperSU changelog and its installation script and both of them confirm that from March installing SuperSU prevents forced encryption. Also many guides suggest installing it as way for disabling forced encryption. Of course you have to flash SuperSU just after flashing ROM, before booting the system.
Click to expand...
Click to collapse
That i already knew mate. But i WANT my storage to remain encrypted. And that's the issue with modified TWRP. You can't enter into recovery on that if your storage is encrypted.
kpmohamedhussain said:
Very simple indeed...
1. Switch on wifi
2. Download OTA and click install whem finished
3. Once installation completed, flash twrp .28 and latest su
4. Reboot and ignore any errors, youwill beup and running fine...
Click to expand...
Click to collapse
Again, "You can't enter into recovery on modified TWRP if your storage is encrypted." So i won't be able to enter into twrp in the first place, let alone flash anything.
abhibnl said:
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
Click to expand...
Click to collapse
In the same boat as you. I have OOS 3.2.8 encrypted, rooted and TWRP 3.0.2-1.26. I too would like to update but have way to much stuff on my phone to back it all up and restore it. Hope you or someone come's up with a solution. I will be following your thread.
Thanks.
Go to twrp. Press backup. Select only data. Save to PC youre backup for safety..
3.2.8 it's Android 6, 4.0 it's Android 7. Some apps might not work from base to base.
If you want to change to F2FS it will format youre phone, wipe phone full internal memory. If you want to change it back to ext4, same.
Clean flash, full wipe it's always better.
dmoses1969 said:
In the same boat as you. I have OOS 3.2.8 encrypted, rooted and TWRP 3.0.2-1.26. I too would like to update but have way to much stuff on my phone to back it all up and restore it. Hope you or someone come's up with a solution. I will be following your thread.
Thanks.
Click to expand...
Click to collapse
My suggestion (and my steps are in #1), install stock recovery, install snap VPN, download the update and install (ignore any errors on root). Once done, you will have Nougat with stock recovery, encryption maintained and all app data also intact.
anshulajain said:
My suggestion (and my steps are in #1), install stock recovery, install snap VPN, download the update and install (ignore any errors on root). Once done, you will have Nougat with stock recovery, encryption maintained and all app data also intact.
Click to expand...
Click to collapse
This is the last resort brother. With this method, unfortunately I won't have any root available. The only way now is to wait for updated twrp.
abhibnl said:
This is the last resort brother. With this method, unfortunately I won't have any root available. The only way now is to wait for updated twrp.
Click to expand...
Click to collapse
I dont know. I found this on Oneplus forum. May be worth trying. Just not 100% sure.....
Thanks! Will try and let you know
abhibnl said:
Thanks! Will try and let you know
Click to expand...
Click to collapse
Well, I tried something, waiting on it to finishing booting and see how it went.
I flashed twrp-3.0.2-1.28-oneplus3p version,
Flashed the OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip inside TWRP,
Flashed SR1-SuperSU-v2.79-SR1-20161221223537.zip right after flashing OTA zip.
Its rebooting and says Android is upgrading. Fingers crossed.
EDIT: Its booted and I am on Nougat, didnt lose my data and phone is still encrypted!
Edit: Ended up having issues with settings app locking up. So, I went a different route and its all working great now.
Downloaded the stock recovery image and renamed it to recovery.img
Make sure after you rename it its not named recovery.img.img, If you have show file extensions enabled on your pc you should already see the file extension.
Rebooted to bootloader - adb flash recovery recovery.img
Using the volume keys and power button selected - reboot recovery.
Now in stock recovery - flashed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
After rom is done flashing, went right back into bootloader. Did not let my phone reboot to start the OS.
Renamed twrp-3.0.2-1.28-oneplus3p.img to recovery.img
adb flash recovery recover.img
Powered off phone and Manually boot it into recovery by holding Power + Volume Down button.
Phone booted into TWRP
Flashed SR1-SuperSU-v2.79-SR1-20161221223537.zip
Wiped cache / dalvik
Rebooted system from TWRP and waited. System is really smooth now, no issues yet. Been playing with it for awhile now.
During the booting up process it might take a minute and it will reboot twice. Dont get nervous like I did thinking it was going to start bootlooping. It booted just fine. I read in a nother thread that SuperSU is what causes it to boot twice.
So......Now I have OOS 4.0 Nougat, Rooted, Encrypted and everything seems to be working fine.
Hi guys,
As soon as I got the OP3 in July, I somehow managed to successfully perform all the steps to get it rooted. I was running OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
OnePlus has been showing me a "new version available" since September, but I very patiently and calmly didn't install it OTA because I didn't want to lose the root.
Finally had a bit of time today, decided I'd finally upgrade. Looked around for the "most recent stable version" and picked this one: OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
Followed the steps for flashing using TWRP (twrp-3.0.2-1.28-oneplus3) here:
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
It worked. Yay. Then (god dammit **** ****) I still saw this "new version available" and couldn't swipe it away... I accidentally clicked it and it downloaded the OTA. Fine.
Now I'm stuck in a TWRP boot loop. I tried re-installing the OTA_035.zip from TWRP -- I tried restoring my Nandroid Backup (only had enough room to save "Boot / Recovery / System" partitions, NOT data) -- and I tried ADB Sideloading 16_OTA_013.zip.
I'm stuck rebooting in TWRP 3.0.2-1.
Is there anything I can try before going ballistic and wiping my data?
Thanks.
Marc
Have you tried the newest blu-spark twrp? https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Puddi_Puddin said:
Have you tried the newest blu-spark twrp? https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Click to expand...
Click to collapse
Hey Puddi_Puddin, thanks for replying.
I never heard of blu-spark, but gave it a shot. Even though the guide seems to apply only to OP3T: https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Anyways I flashed blu-spark with ADB. Booted into blu-spark. Wiped Dalvik/Cache, re-installed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip, wiped Dalvik/Cache, rebooted -- keeps booting into blu-spark TWRP.
Get the "device unlocked" error screen, then the dm-verity error screen, then the OnePlus logo for about 2 seconds, and then back to blu-spark. Repeat ad nauseum.
What state is my device even in? I wouldn't call it bricked... I assume it's still rooted, bootloader works, I can flash different TWRP versions, ...
Any other ideas ... ?
Zingapuro said:
Hey Puddi_Puddin, thanks for replying.
I never heard of blu-spark, but gave it a shot. Even though the guide seems to apply only to OP3T: https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Anyways I flashed blu-spark with ADB. Booted into blu-spark. Wiped Dalvik/Cache, re-installed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip, wiped Dalvik/Cache, rebooted -- keeps booting into blu-spark TWRP.
Get the "device unlocked" error screen, then the dm-verity error screen, then the OnePlus logo for about 2 seconds, and then back to blu-spark. Repeat ad nauseum.
What state is my device even in? I wouldn't call it bricked... I assume it's still rooted, bootloader works, I can flash different TWRP versions, ...
Any other ideas ... ?
Click to expand...
Click to collapse
After you've flashed the full zip, flash also the latest stable version of SuperSu (2.79) and latest TWRP from @eng.stk (the v11, it solves the dm-verity error). Then reboot to recovery, it should appear TWRP and the error should't appear.
Zingapuro said:
Hey Puddi_Puddin, thanks for replying.
I never heard of blu-spark, but gave it a shot. Even though the guide seems to apply only to OP3T: https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Anyways I flashed blu-spark with ADB. Booted into blu-spark. Wiped Dalvik/Cache, re-installed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip, wiped Dalvik/Cache, rebooted -- keeps booting into blu-spark TWRP.
Get the "device unlocked" error screen, then the dm-verity error screen, then the OnePlus logo for about 2 seconds, and then back to blu-spark. Repeat ad nauseum.
What state is my device even in? I wouldn't call it bricked... I assume it's still rooted, bootloader works, I can flash different TWRP versions, ...
Any other ideas ... ?
Click to expand...
Click to collapse
There are quite a few versions of TWRP from eng.stk (bluspark). Which one did you install? Try version 11 which is supposedly for N or 3.0.2-19 or 23.
Thanks for your help everyone.
I downloaded SuperSU-v2.79 here http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
I flashed both ZIPs OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2 and UPDATE-SuperSU-v2.79-20161211114519.zip
I confirm I'm using twrp-3.0.2-0_blu_spark_v11-op3.img (from the link provided by Puddi_Puddin)
Still see dm-verity error ... still keeps booting into blu_spark TWRP. :crying:
Zingapuro said:
Thanks for your help everyone.
I downloaded SuperSU-v2.79 here http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
I flashed both ZIPs OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2 and UPDATE-SuperSU-v2.79-20161211114519.zip
I confirm I'm using twrp-3.0.2-0_blu_spark_v11-op3.img (from the link provided by Puddi_Puddin)
Still see dm-verity error ... still keeps booting into blu_spark TWRP. :crying:
Click to expand...
Click to collapse
Try the other two given by me.
Zingapuro said:
Thanks for your help everyone.
I downloaded SuperSU-v2.79 here http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
I flashed both ZIPs OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2 and UPDATE-SuperSU-v2.79-20161211114519.zip
I confirm I'm using twrp-3.0.2-0_blu_spark_v11-op3.img (from the link provided by Puddi_Puddin)
Still see dm-verity error ... still keeps booting into blu_spark TWRP. :crying:
Click to expand...
Click to collapse
From where have you dowloaded the OTA? XDA or OnePlus forum?
I saw a thread regarding the OnePlus 3T update some post above, if you've downloaded from there you've made a mistake if you own a OnePlus 3.
tnsmani said:
Try the other two given by me.
Click to expand...
Click to collapse
You mean 3.0.2-19 or 23. Not blu_spark, right? Ok I tried twrp-3.0.2-23-oneplus3.img from here (https://www.androidfilehost.com/?fid=529152257862684308)
I tried flashing my old images I used last year (I just wanted the phone to boot into *something*) Oxygen_16_OTA_013 & SuperSU-v2.74. Managed to boot. Updated 4 Apps (??) But as soon as the login screen came up, it would reboot ... and keep looping. So I couldn't use the phone, but at least I managed to boot into something other than TWRP.
Next I tried to reinstall OOS4, 16_OTA_035 with SuperSU-v2.79 SR2. Still get the verity error, but at least I managed to boot! But - the phone is *super* buggy/unusable... SIM cards aren't working - I can't access my options screen - and "Developer options are not available for this user".
Now from my "About" screen I have OOS 4.0, Android 7.0, Kernel version 3.18.31-perf+ [email protected] <-- (that's from my TWRP version. right?)
Did the OTA I install from OnePlus directly screw everything up? For that brief moment before I installed it, I tasted a seemingly properly working OOS 4, so I know it's possible...
A few lessons I've learned are -- I can use any recovery (TWRP) to use MTP and flash files and stuff... but in order for the phone to work properly, I have to a) flash the SuperSU (not just the ROM) and b) make sure I have the "correct/proper" TWRP (kernel?) matched with each ROM. Is that kind of right? That's where I'm stuck I guess.
let92 said:
From where have you dowloaded the OTA? XDA or OnePlus forum?
I saw a thread regarding the OnePlus 3T update some post above, if you've downloaded from there you've made a mistake if you own a OnePlus 3.
Click to expand...
Click to collapse
I downloaded from here
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
I'm sure I'm making a ton of mistakes -- that's why I'm here
(I read here https://forum.xda-developers.com/on...mple-trick-t3530685/post70415499#post70415499 that .28 shouldn't be used)
This post mentions a procedure to get rid of verity https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
I'm currently backing up my data, and I'll attempt to follow these instructions to switch to f2fs (hopefully get rid of the verity error) and install OxygenOS 4.0.1 (http://otafsc.h2os.com/patch/amazon...n_16_OTA_037_all_1701041839_aa64b084a40a4.zip)
I'm also a bit confused about the best version of SuperSU-v2.79 to use, because blu_spark was writing somewhere (can't find where) that SR1 and SR2 were the cause of battery issues ... So yeah, I've got other things to try, but should the ROM from OOS4.0.1 work with any of them?
THANKS.
Zingapuro said:
You mean 3.0.2-19 or 23. Not blu_spark, right? Ok I tried twrp-3.0.2-23-oneplus3.img from here (https://www.androidfilehost.com/?fid=529152257862684308)
I tried flashing my old images I used last year (I just wanted the phone to boot into *something*) Oxygen_16_OTA_013 & SuperSU-v2.74. Managed to boot. Updated 4 Apps (??) But as soon as the login screen came up, it would reboot ... and keep looping. So I couldn't use the phone, but at least I managed to boot into something other than TWRP.
Next I tried to reinstall OOS4, 16_OTA_035 with SuperSU-v2.79 SR2. Still get the verity error, but at least I managed to boot! But - the phone is *super* buggy/unusable... SIM cards aren't working - I can't access my options screen - and "Developer options are not available for this user".
Now from my "About" screen I have OOS 4.0, Android 7.0, Kernel version 3.18.31-perf+ [email protected] <-- (that's from my TWRP version. right?)
Did the OTA I install from OnePlus directly screw everything up? For that brief moment before I installed it, I tasted a seemingly properly working OOS 4, so I know it's possible...
A few lessons I've learned are -- I can use any recovery (TWRP) to use MTP and flash files and stuff... but in order for the phone to work properly, I have to a) flash the SuperSU (not just the ROM) and b) make sure I have the "correct/proper" TWRP (kernel?) matched with each ROM. Is that kind of right? That's where I'm stuck I guess.
I downloaded from here
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
I'm sure I'm making a ton of mistakes -- that's why I'm here
(I read here https://forum.xda-developers.com/on...mple-trick-t3530685/post70415499#post70415499 that .28 shouldn't be used)
This post mentions a procedure to get rid of verity https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
I'm currently backing up my data, and I'll attempt to follow these instructions to switch to f2fs (hopefully get rid of the verity error) and install OxygenOS 4.0.1 (http://otafsc.h2os.com/patch/amazon...n_16_OTA_037_all_1701041839_aa64b084a40a4.zip)
I'm also a bit confused about the best version of SuperSU-v2.79 to use, because blu_spark was writing somewhere (can't find where) that SR1 and SR2 were the cause of battery issues ... So yeah, I've got other things to try, but should the ROM from OOS4.0.1 work with any of them?
THANKS.
Click to expand...
Click to collapse
Unfortunately I haven't tried to update the phone yet, so I don't know what else you can do. But you can also follow the guide posted by @Viper The Ripper here:
https://forum.xda-developers.com/showpost.php?p=70499899&postcount=5
I think that it's simpler and I'll follow that one this weekend when trying to updating my phone
Zingapuro said:
Hi guys,
As soon as I got the OP3 in July, I somehow managed to successfully perform all the steps to get it rooted. I was running OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
OnePlus has been showing me a "new version available" since September, but I very patiently and calmly didn't install it OTA because I didn't want to lose the root.
Finally had a bit of time today, decided I'd finally upgrade. Looked around for the "most recent stable version" and picked this one: OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
Followed the steps for flashing using TWRP (twrp-3.0.2-1.28-oneplus3) here:
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
It worked. Yay. Then (god dammit **** ****) I still saw this "new version available" and couldn't swipe it away... I accidentally clicked it and it downloaded the OTA. Fine.
Now I'm stuck in a TWRP boot loop. I tried re-installing the OTA_035.zip from TWRP -- I tried restoring my Nandroid Backup (only had enough room to save "Boot / Recovery / System" partitions, NOT data) -- and I tried ADB Sideloading 16_OTA_013.zip.
I'm stuck rebooting in TWRP 3.0.2-1.
Is there anything I can try before going ballistic and wiping my data?
Thanks.
Marc
Click to expand...
Click to collapse
In my opinion, the only thing you can try is to make a data backup from recovery to any external storage (like a pendrive) by Otg, but it takes some risks. In case this partition has been damaged, you can get issues when you install the rom.
The safest you can do is clean installation in spite of you lose data so, full wipes and a new full rom.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
You have to install stock recovery, and then reboot into recovery, you will have a instalation error, reboot and loop solved Then, you can flash your twrp and su without loosing data
I discovered following this threath desesperate and going to do a clean install, dowload the files and try to do it steap by steap: https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
Good luck :good:
P.D.: I have formated system partition, so I lost the android configuration
satisastur said:
You have to install stock recovery, and then reboot into recovery, you will have a instalation error, reboot and loop solved Then, you can flash your twrp and su without loosing data
I discovered following this threath desesperate and going to do a clean install, dowload the files and try to do it steap by steap: https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
P.D.: I have formated system partition, so I lost the android configuration
Click to expand...
Click to collapse
Hey Satisastur,
Thanks for taking the time to comment. Yes, actually that's exactly the guide I wanted to follow. But I'm stuck before even starting -- if I make Nandroid Backup now (in ext4) I can't load it back once filesystem changes to f2fs -- isn't that right?
(I also asked the question in that thread: https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page8#post70525818 )
And uh... sorry... what exactly do you mean "android configuration"... like ringtones and stuff?
Zingapuro said:
Hey Satisastur,
Thanks for taking the time to comment. Yes, actually that's exactly the guide I wanted to follow. But I'm stuck before even starting -- if I make Nandroid Backup now (in ext4) I can't load it back once filesystem changes to f2fs -- isn't that right?
(I also asked the question in that thread: https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page8#post70525818 )
And uh... sorry... what exactly do you mean "android configuration"... like ringtones and stuff?
Click to expand...
Click to collapse
Yes, I was on f2fs before this happens, so I only have to install all without formating data. You should do a manual backup to do that, once on recovery, you be able to enter phone data partition from windows. Copy all folders you want to save before formating to f2fs in recovery. Other setup and configuration like ringtones and stuff, all cache and configuration of apps, wallpaper, led, colors and themes... you will lost it. I don't know how to backup that, but its the worst part of formating data... google backup doesn't save all the config
You will start with the android phone start menu, like new, with new dactilar and patron security, etc...
@Zingapuro
Try TWRP 3.0.2_19 and Supersu 2.79 stable. For some people this works and according to eng. stk, only Supersu 2.79 stable is compatible with N.
tnsmani said:
Try TWRP 3.0.2_19 and Supersu 2.79 stable. For some people this works and according to eng. stk, only Supersu 2.79 stable is compatible with N.
Click to expand...
Click to collapse
Tried flashing twrp-3.0.2-19-oneplus3.img and from TWRP installing:
OnePlus3Oxygen_16_OTA_037_all_1701041839_aa64b084a40a4.zip
UPDATE-SuperSU-v2.79-20161211114519.zip
Same issues as described above: boots into 4.0.1, but buggy, SIM cards don't work, no Dev options, etc...
satisastur said:
Copy all folders you want to save before formating to f2fs in recovery.
Click to expand...
Click to collapse
Yeah, I have a feeling this is my only choice. This is the next thing I'll try.
Zingapuro said:
Tried flashing twrp-3.0.2-19-oneplus3.img and from TWRP installing:
OnePlus3Oxygen_16_OTA_037_all_1701041839_aa64b084a40a4.zip
UPDATE-SuperSU-v2.79-20161211114519.zip
Same issues as described above: boots into 4.0.1, but buggy, SIM cards don't work, no Dev options, etc...
Yeah, I have a feeling this is my only choice. This is the next thing I'll try.
Click to expand...
Click to collapse
Try this guide: https://forum.xda-developers.com/oneplus-3/how-to/guide-flashing-oos-v4-0-1-custom-rom-t3537757
It will fix most of your issues.
For going back to full stock use this guide: https://forums.oneplus.net/threads/guide-how-to-unroot-your-oneplus-3-and-go-back-completely-to-stock.456232/
I hope everything will go back to normal.
Hi everyone,
Just want to update that my phone is back up and running. Thanks for your all your help.
More details here:
https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page9#post70588707
Is there any way to update this thread to [SOLVED] ?
Zingapuro said:
Hi everyone,
Just want to update that my phone is back up and running. Thanks for your all your help.
More details here:
https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page9#post70588707
Is there any way to update this thread to [SOLVED] ?
Click to expand...
Click to collapse
Great!
I think you can edit the thread title
Boot into your recovery [Vol+ and Power]
Connect your phone to your PC
Execute the following fastboot command on your PC (More informations on fastboot)
Code:
fastboot continue
Your phone will start right away. :good:
Hey guys, so this is my problem:
I've bought a OnePlus 5T some days after its release. When i searched for a tutorial teaching how to root the device (i don't know the root process deeply), there were just a few videos at that time. This was the video i watched to root me device (some people already told me that this isn't the best method, but it was what I had at the moment):
https://www.youtube.com/watch?v=9SsIH6iauYQ
As i told, i'm a layman and doesn't know the root process, and now i need to update urgently my Android (its currently on the Android version it was when i bought it: 7.1.1). I've found some threads with a similar situation, but i got lost in all the details that i don't know, like "you need to unlock the bootloader", "just flash the TWRP and stuff", but i need a more simple language like "click this, click that". I really need it now, so i'm even thinking about searching for someone trustable to do it or transfering some cash to anyone who helps me, because i don't wanna lose anything important in the process. Anyone that can help me, PLEASE?!
Thanks in advance
djmarkybr said:
Hey guys, so this is my problem:
I've bought a OnePlus 5T some days after its release. When i searched for a tutorial teaching how to root the device (i don't know the root process deeply), there were just a few videos at that time. This was the video i watched to root me device (some people already told me that this isn't the best method, but it was what I had at the moment):
https://www.youtube.com/watch?v=9SsIH6iauYQ
As i told, i'm a layman and doesn't know the root process, and now i need to update urgently my Android (its currently on the Android version it was when i bought it: 7.1.1). I've found some threads with a similar situation, but i got lost in all the details that i don't know, like "you need to unlock the bootloader", "just flash the TWRP and stuff", but i need a more simple language like "click this, click that". I really need it now, so i'm even thinking about searching for someone trustable to do it or transfering some cash to anyone who helps me, because i don't wanna lose anything important in the process. Anyone that can help me, PLEASE?!
Thanks in advance
Click to expand...
Click to collapse
I am not sure, if I understood it correctly. You need to update your device that's clear but do you need your device still rooted afterwards?
Because if not just update your device, it should be that simple. If you need to root your device afterwards just follow this thread:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
Gesendet von meinem CLT-L29 mit Tapatalk
CaerCadarn said:
I am not sure, if I understood it correctly. You need to update your device that's clear but do you need your device still rooted afterwards?
Because if not just update your device, it should be that simple. If you need to root your device afterwards just follow this thread:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse
Sorry, actually i forgot this detail. I have a root based on SuperSU and i would like to have the Magisk one after i update my Android. What you think is the best way to do it?
Btw, just one question: you said that if i didn't want to keep the root, i could just update my Android, but once i click in the system update option, the update fails, i believe its because of the root right?
djmarkybr said:
Sorry, actually i forgot this detail. I have a root based on SuperSU and i would like to have the Magisk one after i update my Android. What you think is the best way to do it?
Btw, just one question: you said that if i didn't want to keep the root, i could just update my Android, but once i click in the system update option, the update fails, i believe its because of the root right?
Click to expand...
Click to collapse
No, because you have to download the whole update package. Normally the device detects itself if it is rooted/unlocked, so there should be the option to download the whole package. With that the update should not fail.
Gesendet von meinem CLT-L29 mit Tapatalk
CaerCadarn said:
No, because you have to download the whole update package. Normally the device detects itself if it is rooted/unlocked, so there should be the option to download the whole package. With that the update should not fail.
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse
Where i find this whole package option? Can i just download the last version (5.7.1) on OnePlus site?
@ djmarkybr,
follow this self explanatory guide by Funk Wizard, here:https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
for removing super su you can use uninstaller unsu
a0879 said:
@ djmarkybr,
follow this self explanatory guide by Funk Wizard, here:https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
for removing super su you can use uninstaller unsu
Click to expand...
Click to collapse
Ok, i read the guide so i'll try to follow it once i get home since i don't have admin access on my work.
Just 2 questions:
1- how do i remove SuperSU? I'm asking cause i've download the file you attached and there is no .exe file or something on it, do i put the files on my phone and then execute the uninstaller by the phone itself? If so, how i do it? Btw, i was taking a look at the SuperSU app and it has this option : "Exchange superuser app - Cleaning to exchange for another superuser app", it works just the same as your uninstall?
2- Even reading FunkWizard's guide, i'm still confused of which order i should do the things. Because i need to:
- Uninstall SuperSU
- Download full OTA on OnePlus website and install it through TWRP
- Install Magisk
is there a best order to do all this? Am i missing something?
Thanks
The attached unsu file is for removing super su by flashing thru twrp ! its not not for pc i.e. no .exe file.
i assume that your bootloader is unlocked and twrp already installed then just flash the unsu zip in twrp > wipe dalvik/cache > reboot, super su gets removed.
You can also go like this (you may need a pc for this):
Since you are on nougat build download the oreo version first.
first download the full oos rom from here on pc : https://forum.xda-developers.com/showthread.php?t=3728665http://
download latest magisk zip from here :https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445http://
download no verity zip to remain decrypted, here :https://forum.xda-developers.com/oneplus-5/how-to/guide-how-to-decrypt-data-partition-t3642144
boot your phone in twrp , wipe everything (first transfer your important data from phone to pc/usb otg), in twrp you can go advanced > format data > yes > done > reboot twrp > now there is nothing in your phone by formatting internal storage (everything). Now while in twrp transfer your already downloaded oos and magisk zips from pc to your phone through the data cable.
Now, flash oos zip > magisk zip > no verity zip > wipe dalvik/cache > reboot > that's it, enjoy your new android version !
a0879 said:
The attached unsu file is for removing super su by flashing thru twrp ! its not not for pc i.e. no .exe file.
i assume that your bootloader is unlocked and twrp already installed then just flash the unsu zip in twrp > wipe dalvik/cache > reboot, super su gets removed.
You can also go like this (you may need a pc for this):
Since you are on nougat build download the oreo version first.
first download the full oos rom from here on pc : https://forum.xda-developers.com/showthread.php?t=3728665http://
download latest magisk zip from here :https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445http://
download no verity zip to remain decrypted, here :https://forum.xda-developers.com/oneplus-5/how-to/guide-how-to-decrypt-data-partition-t3642144
boot your phone in twrp , wipe everything (first transfer your important data from phone to pc/usb otg), in twrp you can go advanced > format data > yes > done > reboot twrp > now there is nothing in your phone by formatting internal storage (everything). Now while in twrp transfer your already downloaded oos and magisk zips from pc to your phone through the data cable.
Now, flash oos zip > magisk zip > no verity zip > wipe dalvik/cache > reboot > that's it, enjoy your new android version !
Click to expand...
Click to collapse
Thank you so much for the help, i'll try this once i get home. Just one more thing: you suggest a Beta Oreo Version or a Stable One? Any version specifically?
djmarkybr said:
Thank you so much for the help, i'll try this once i get home. Just one more thing: you suggest a Beta Oreo Version or a Stable One? Any version specifically?
Click to expand...
Click to collapse
After installing Oreo I don't think that you'll remain on it for a long time.. ha, ha..., Pie is already waiting out there.. :laugh:
go for stable :good:
5.1.3 to 5.1.7
a0879 said:
After installing Oreo I don't think that you'll remain on it for a long time.. ha, ha..., Pie is already waiting out there.. :laugh:
go for stable :good:
5.1.3 to 5.1.7
Click to expand...
Click to collapse
Hey buddy, i followed your steps and now the phone isn't starting totally, it stops on the OnePlus start screen with the white balls around the red one. Should i do the process all again? Can i start TWRP in this situation?
edit: nvm, i try it again and now it works normally But Magisk isn't working, when i try to flash it through TWRP it shows "Updater process ended with ERROR: 1
Error instaling zip file '/sdcard/Magisk....' "
And Android version is still 7.1.1 , so i need to update the Android through the phone itself and then i reapply the root?
edit2: sorry for so many edits in this same reply, let me try to explain the status of all the process right now to see if you can give me some tip:
- Android is on 8.1.0 version right now; Do i need to upload it more?
- Bootloader is unlocked (at least when i go "Enable OEM Unlocking" on Developer options, i cant check this option cause it says that bootloader is already unlocked)
- I can't acess TWRP on reboot now, it seems that i enter on some Oneplus Recovery Mode, not TWRP itself
- Root isn't working
If you need any extra information just ask me
djmarkybr said:
Hey buddy, i followed your steps and now the phone isn't starting totally, it stops on the OnePlus start screen with the white balls around the red one. Should i do the process all again? Can i start TWRP in this situation?
edit: nvm, i try it again and now it works normally But Magisk isn't working, when i try to flash it through TWRP it shows "Updater process ended with ERROR: 1
Error instaling zip file '/sdcard/Magisk....' "
And Android version is still 7.1.1 , so i need to update the Android through the phone itself and then i reapply the root?
edit2: sorry for so many edits in this same reply, let me try to explain the status of all the process right now to see if you can give me some tip:
- Android is on 8.1.0 version right now; Do i need to upload it more?
- Bootloader is unlocked (at least when i go "Enable OEM Unlocking" on Developer options, i cant check this option cause it says that bootloader is already unlocked)
- I can't acess TWRP on reboot now, it seems that i enter on some Oneplus Recovery Mode, not TWRP itself
- Root isn't working
If you need any extra information just ask me
Click to expand...
Click to collapse
I acknowledge your PM, Little tied up at the moment. Please allow me time till tonight to study your case and i shall reply with the best way forward. Don't do anything silly till then
Edit: Please confirm the current status of the device
Rom/OS version
TWRP yes/no
Magisk yes/no
Funk Wizard said:
I acknowledge your PM, Little tied up at the moment. Please allow me time till tonight to study your case and i shall reply with the best way forward. Don't do anything silly till then
Edit: Please confirm the current status of the device
Rom/OS version
TWRP yes/no
Magisk yes/no
Click to expand...
Click to collapse
No problem FunkWizard, take your time and answer when possible, i'll hold my fingers to don't get a worst situation. :angel:
Rom/OS version : Custom ROM(i believe)/8.1.0
TWRP: no; after everything i tried, when i try to acess TWRP now, it doesn't enter on TWRP itself, it shows a different recover screen, like a recovery screen of Oneplus system, just like the picture i attached.
Magisk: no; one of my goals in this entire process was to uninstall SuperSU and install Magisk after all, but when TWRP was working and i tried to install Magisk, i got an error and Magisk didn't install correctly, and since i've uninstalled the SuperSU, i'm without root right now, and i can't even try to install it since TWRP is working right now :crying:
djmarkybr said:
No problem FunkWizard, take your time and answer when possible, i'll hold my fingers to don't get a worst situation. :angel:
Rom/OS version : Custom ROM(i believe)/8.1.0
TWRP: no; after everything i tried, when i try to acess TWRP now, it doesn't enter on TWRP itself, it shows a different recover screen, like a recovery screen of Oneplus system, just like the picture i attached.
Magisk: no; one of my goals in this entire process was to uninstall SuperSU and install Magisk after all, but when TWRP was working and i tried to install Magisk, i got an error and Magisk didn't install correctly, and since i've uninstalled the SuperSU, i'm without root right now, and i can't even try to install it since TWRP is working right now :crying:
Click to expand...
Click to collapse
you lost TWRP sometimes happen but not worry you can easly load again :good:
Mervingio said:
you lost TWRP sometimes happen but not worry you can easly load again :good:
Click to expand...
Click to collapse
Thank God o/ i just need to know how lol :laugh:
djmarkybr said:
No problem FunkWizard, take your time and answer when possible, i'll hold my fingers to don't get a worst situation. :angel:
Rom/OS version : Custom ROM(i believe)/8.1.0
TWRP: no; after everything i tried, when i try to acess TWRP now, it doesn't enter on TWRP itself, it shows a different recover screen, like a recovery screen of Oneplus system, just like the picture i attached.
Magisk: no; one of my goals in this entire process was to uninstall SuperSU and install Magisk after all, but when TWRP was working and i tried to install Magisk, i got an error and Magisk didn't install correctly, and since i've uninstalled the SuperSU, i'm without root right now, and i can't even try to install it since TWRP is working right now :crying:
Click to expand...
Click to collapse
djmarkybr said:
Thank God o/ i just need to know how lol :laugh:
Click to expand...
Click to collapse
If you have oneplus recovery instead of twrp then you can't be on custom ROM, it has to be on oxygenos. Unless I know of what version I would not be able to give you the step by step process.
U can flash twrp easily, simply download the latest Bluspark twrp and flash it via fastboot steps on the unlock device thread in the guides section.
There on you can download and flash the full zips from twrp followed by Magisk.
Sent from my OnePlus6T using XDA Labs
Funk Wizard said:
If you have oneplus recovery instead of twrp then you can't be on custom ROM, it has to be on oxygenos. Unless I know of what version I would not be able to give you the step by step process.
U can flash twrp easily, simply download the latest Bluspark twrp and flash it via fastboot steps on the unlock device thread in the guides section.
There on you can download and flash the full zips from twrp followed by Magisk.
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
Sorry Funk, i confused the information, my OxigenOS is 5.1.4
I'll wait for your step by step just to make sure i don't do something wrong
Hi. I download the official update on My 5t rooted. But do not install correctly. "installation failed", it's a twrp problem? I i flash the stock recovery works fine? Thanks.
bramby said:
Hi. I download the official update on My 5t rooted. But do not install correctly. "installation failed", it's a twrp problem? I i flash the stock recovery works fine? Thanks.
Click to expand...
Click to collapse
I don't know, i'm also lost here. Hope someone can help you too
bramby said:
Hi. I download the official update on My 5t rooted. But do not install correctly. "installation failed", it's a twrp problem? I i flash the stock recovery works fine? Thanks.[/QUOTE @djmarkybr
I flashed back stock recovery and all went fine with Pie!
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse