[HELP] Minfree Settings - HTC One X

Hi guys. I can't change minfree settings in this phone. Tried with init.d, ram manager pro, pure performance, v6 supercharger etc etc... Everytime changes succesfully but after 5 minutes it's reset to stock values.
How to change minfree settings permamently?
P.S : i have checked all Sense based Roms and same results
Currently using MaximusHD 21.3 and can't get it work

Related

[MOD] Trickster MOD [2012-07-09]

Introducing Trickster MOD, bringing Trickster experience to virtually every ROM out there.
Users using Trickster ROM 1.2.1 or newer can use this MOD to update
This CWM zip include the binaries and scripts I used for optimization in Trickster ROM. What it can do/set:
- Zipalign and sqlite DB optimization at boot
- Some android properties tweaks with mobile network speed tweak
- Screen state optimization for kernel task scheduler and virtual memory management (ch33kybutt)
- Set I/O scheduler, read ahead buffer, CPU scaling governor, min and max CPU speed
Following features are dependent on kernel features:
- Color (applied by default), contrast and gamma tweaks
- Generic hotplug
- CPU Temp limit
- Minimal SmartReflex voltage of Core, IVA, and MPU domains
- Nominal SmartReflex voltage for Core, IVA, and MPU domains
- Regulator voltages
- GLaDOS live OC of Core, GPU and MPU
- WIFI mode for screen off (power saving or full speed)
- Vibrator strength
- Headset volume boost
- High performance sound
- Force fast charge
- Battery live extender
- Touch wake and touch wake duration
- fsync control
Download
Trickster MOD 20120709
Control App​
Changelogs
Requirements:
- CWM
- Someone who understands instructions below​
Installation/Update instructions:
- Reboot to CWM recovery
- Do a nandroid if you're scared (recommended in case you have problem)
- Install zip from sdcard
- Reboot the phone
- If you see /sdcard/trickster directory with configuration files inside then this mod installed successfully​
Usage:
By default Trickster color, some android property regarding UI smoothness and mobile data speed tweaks and screen state optimization are applied. If you want to change additional settings then either use the app or :
- Go to /sdcard/trickster directory, you'll see at most four following configuration files, depending on kernel features:
. color.conf: color related tweak
. general.conf: generic tweaks like zipalign, sqlite, and screenstate optimization
. kern_general.conf: generic kernel tweaks like CPU speed, governor, IO scheduler and readahead buffer
. kern_specific.conf: specific kernel features like sound control, WIFI power, fast charge...​ - Edit any above file to change the settings you want using app like ES Explorer, Root Explorer..., instructions included inside
- Settings are automatically applied when user saves any of these files
- Some changes require restarting your phone
- To check log to see if it works use "logcat|grep Trickster" from adb/terminal​
Reinstall boot service, Reset settings, Removal instructions:
- If you install a new kernel that includes ramdisk (boot.img format like franco or leanKernel), you can either reinstall Trickster MOD, run "tricks install" from adb root shell or terminal, or apply this CWM zip from recovery.
- You can delete a configuration file, files, or entire /sdcard/trickster directory to reset to default settings for a file, files or all configuration respectively
- If you mess up and can't boot, say aggressive OC/UV , use this CWM zip to reset
- If you want to uninstall, use this CWM zip​
Credits:
- Google
- Our great kernel devs
- chainfire for SuperSU and su
- stericson for busybox
- ch33kybutt's for his brilliant idea on screen state optimizations
- Beta testers for your dedication in testing this
- nexus.prime for his unintallation script
- phone_user for init.d CWM zip
- Anyone I learnt from
Disclaimer: This is provided with NO GUARANTY whatsoever. Use your common sense.
Beta test: If you want to test my stuffs, including other things beside this. Contact me through PM.
This is interesting.
Sent from my Galaxy Nexus
Just wondering if the Trickster Rom is for the Nexus? If it is then where can we try it out, thanks.
smoothone said:
Just wondering if the Trickster Rom is for the Nexus? If it is then where can we try it out, thanks.
Click to expand...
Click to collapse
It is but it's for the GSM Galaxy Nexus as I made it from google IMM76I image, it does not work on toroplus.
bigeyes0x0 said:
It is but it's for the GSM Galaxy Nexus as I made it from google IMM76I image, it does not work on toroplus.
Click to expand...
Click to collapse
So if I where to put this mod on an aosp rom it would be like the actual trickster rom?
Sent from my Galaxy Nexus
Yes, nearly identical. The remaining mod is dalvik-cache in cache partition which free up space for your virtual sdcard. And the other is Zeppelinrox's supercharged services.jar for better multitasking.
bigeyes0x0 said:
Yes, nearly identical. The remaining mod is dalvik-cache in cache partition which free up space for your virtual sdcard. And the other is Zeppelinrox's supercharged services.jar for better multitasking.
Click to expand...
Click to collapse
Thanks for the input.
Sent from my Galaxy Nexus
The values in script are listed ad "binary". Is that what needs to be imputed to activate that particular mod? And the specific integer in those mods? Thnx in advanced r
wow! nice to see this,thanks for sharing
dangambino said:
The values in script are listed ad "binary". Is that what needs to be imputed to activate that particular mod? And the specific integer in those mods? Thnx in advanced r
Click to expand...
Click to collapse
Binary as in 0 and 1 to disable and enable respectively. I thought that is obvious.
So if you want to enable feature named X just set X=1
New version in first post. Remove requirements for init.d and busybox and it has some tweaks to tricks script.
Does anyone know if this will work on paranoid android?
I heard someone flash it successfully. To be sure just do a nandroid before hand.
Question, does it work with rooted stock?
Thanks!
It's only requirements are root and CWM, the next version might not even need root (in private testing), so you can use it on your ROM, sure.
Thanks!
Ok I'm retarded or something... i can't figure this out. Anyways, this is my question... I flashed the zip with cwm, does that mean its working now? Or do I have to use the terminal stuff it said in the Usage section and if I do, how exactly do I do that?
Thanks!
spykedvodka said:
Ok I'm retarded or something... i can't figure this out. Anyways, this is my question... I flashed the zip with cwm, does that mean its working now? Or do I have to use the terminal stuff it said in the Usage section and if I do, how exactly do I do that?
Thanks!
Click to expand...
Click to collapse
I actually have the same question.
If you see directory /sdcard/trickster with file trickster.conf inside after installing through CWM, then it should work. To change settings modify trickster.conf, but you don't really need to if you don't want/need to change settings. The default is good enough in general.
New version released with some nice goodies. Read changelog.

[Q] Andromadus Mimicry 1.1.1 + V6 Supercharger minfree doesn't persist

I just installed Andromadus Mimicry 1.1.1 that comes with Supercharger preconfigured.
Deciding to tweak the settings further, I installed the newest Supercharger script (Update 9 RC9) and everything seems to go fine except that my minfree values do not stick.
Tried to update the services.jar but the scripts ICS service center and the Webapp at http://android.mimic.ca/ both indicate that my services.jar is already supercharged and applied.
Am I not suppose to fool around with the Mimicry Supercharger settings? Or is there something I'm missing? Another user commented on checking my settings within the ROM CONTROL settings but I do not believe this rom has that feature.
Any advice?
baifengz said:
I just installed Andromadus Mimicry 1.1.1 that comes with Supercharger preconfigured.
Deciding to tweak the settings further, I installed the newest Supercharger script (Update 9 RC9) and everything seems to go fine except that my minfree values do not stick.
Tried to update the services.jar but the scripts ICS service center and the Webapp at http://android.mimic.ca/ both indicate that my services.jar is already supercharged and applied.
Am I not suppose to fool around with the Mimicry Supercharger settings? Or is there something I'm missing? Another user commented on checking my settings within the ROM CONTROL settings but I do not believe this rom has that feature.
Any advice?
Click to expand...
Click to collapse
The webapp is actually created by me (as is Mimicry). That said, when you install the V6 Supercharger mod within Aroma on Mimicry it will copy over the patched services.jar, so that part is accurate. The newest version of the script has no added effect in terms of minfrees/oom groupings. It's the exact same as it has been for months now, so upgrading versions of the script doesn't matter so much.
If you want to run V6 Supercharger manually, do not select the V6 Supercharger option when you install the ROM, but as I said, there's no point really.
blk_jack said:
If you want to run V6 Supercharger manually, do not select the V6 Supercharger option when you install the ROM, but as I said, there's no point really.
Click to expand...
Click to collapse
Thanks for the clarification. I wanted to run the script manually to make sure Nitro Lag Nullifier was running as well as possibly try to bulletproof some apps. I had to re-run Aroma and uninstall the preconfigured Andromadus script and ran it manually.
But if you say there's no point to this (for our phone?) then I'll take your word for it.
Thanks for all the hard work!
Beware of Nitro Lag Nullifier on ICS.. When I tested it last it seemed to negatively affect performance!
When enabling V6 Supercharger on Mimicry it actually creates a file to run on boot that's identical to the one the V6 Supercharger script creates. The difference is that you don't have to install Script Manager or patch services.jar or re-run anything everytime you flash a new version of the ROM.
Hope that helps clarify
Sent from my HTC Vision using xda premium

What are the best scripts to speed up desire?

I am looking for scripts to speed up my phone. I don't want to wipe it clean, just looking for some scripts to speed it up. Most I am interested in is to speed up general phone usage and internet browsing. My rom is [ROM][MIUI-XJ] Mar 31 - 2.3.30 GB 2.3.7 EN-MULT+OTA+CM+Updater|D2EXT X-PART|A2SD+|D2W
Try supercharger v6. I've tried it and I honestly didn't notice any difference in speed, but some people have.
Also check out the app called greenify. It hibernates apps and stops them from running in the background and frees up more ram.
Sent from my HTC Desire using xda app-developers app
hi i found the fastest combination for our device : build.prop tweaks from fluide engine http://forum.xda-developers.com/showthread.php?t=2069238 , int.d tweaks from fly-on mod http://forum.xda-developers.com/showthread.php?p=40475302 or project lard http://forum.xda-developers.com/showthread.php?t=2265510 ( but after install delete build.prop tweaks from this script) in combination whit gaming ram manager that you will find in project lard's threat and for gpu you need full gpu rendering http://forum.xda-developers.com/showthread.php?t=2254999 and adreno booster http://forum.xda-developers.com/showthread.php?t=2167228 and that's all
tcris45 said:
hi i found the fastest combination for our device : build.prop tweaks from fluide engine http://forum.xda-developers.com/showthread.php?t=2069238 , int.d tweaks from fly-on mod http://forum.xda-developers.com/showthread.php?p=40475302 or project lard http://forum.xda-developers.com/showthread.php?t=2265510 ( but after install delete build.prop tweaks from this script) in combination whit gaming ram manager that you will find in project lard's threat and for gpu you need full gpu rendering http://forum.xda-developers.com/showthread.php?t=2254999 and adreno booster http://forum.xda-developers.com/showthread.php?t=2167228 and that's all
Click to expand...
Click to collapse
Thank you so much

Performance settings for ROM Toolbox ?

I installed ROM Toolbox but i'm really lost.My phone's a bit slow and i was wondering if tweaking ROM Toolbox could make it faster.What settings should i choose for min and max frequency in CPU Control and what governor and i/o scheduler is the best?Also what are the recommended settings in kernel tweaks?

[Q] [leankernel] custom kernel does not fix freq/governor

Hi @ all
i am using the leankernel 8.0 on my gsm gnex(yakju), android 4.3;
my kernel settings are not held on the boot
i have tried Trickster mod and leantweaks (with this i have also tried to set the script throught the init. doctor, but on the reboot the freq. of cpu (and other things) don't remain
- i have a stock rom by google // JWR66V

Categories

Resources