Related
(To any visitors to this thread,
Please Rate this thread based on your reading and tweaks that I provided. If the rate is too low, that means I'm doing a bad job in here! If the rate goes down below 4 stars, I'll stop providing these tweaks! So, please excuse me. Please don't rate this thread with the only reason that I do not provide the tweaks for your rom, which you are using! I'm using my own time for this just like lots of other users. Only the thing that makes me more happy and get focused on this would be your rates and 'thanks' on this thread)
[Quick uptates]
I just found that some of the cpu tweaks are not working on current kernel. So it needs to be changed. The coming new version of Kobridge tweak pack v3.0 will have the adjustment on it. Because kernel does not suppot some cpu function, you may see no difference between the different mode of tweaks. v3.0 is coming soon!
What's this?
The flashable zip files including the build.prop (known as Super build.prop, thanks to Team ERA for naming it) for rooted stock based ROMs and other very useful init.d scripts.
I've started working on these tweaks from several month ago and created several tweak related threads -
Learn How to Run Init.d Scripts from Boot on the Epic 4G Touch
[Guide][init.d]How to run init.d scripts on boot + Best Battery Life
Extend your Battery Life - init.d, build.prop and everything
How to change wifi sleep idle timer - Tweak
Which ROMs supported?
Basically, these tweaks only work on stock based ICS Roms like Calkulin's (tested), sfhub's (tested), Agat's (tested), VeNuM_ICE_Rom (tested), Frankenstein's Ego (Tweaks on TeamERA thread), MIJJz BLEND ICS (not tested), AnaKonda Rom ICS (being tested), HyDrA (being tested), etc.... Do not flash this tweak on any other ROMs.
How to install?
Just go to the Recovery mode by press vol up + power at the same time and flash the zip file. To flash the zip file, you will need repacked kernel kernel like Rogue Recovery or sfhub's kernel plus.
Note: Be sure that you have your nandroid before doing anything. It is not required but recommended just in case. This flashable zip file don't format or erase anything but replace build.prop file, install-recovery.sh, install-recovery-orig.sh and init.d tweak files if there's already same named files.
So, before flashing this zip file, be sure that you make the backup files properly just for in case you want to go back.
What's going to be installed or replaced?
build.prop - Be sure that you have the same version of stocked based ROM. If you rom is different with the rom version in the title, you need to find a different build.prop which is based on your rom version.
install-recovery.sh, install-recovery-orig.sh - Thanks to sfhub. sfhub created this file originally to support the init.d scripts from stock or any other type of roms. If you are using sfhub's auto root tool, the original install-recovery.sh would be saved into install-recovery-orig.sh. So, be sure that make backup these files if those are already there. My flashable zip file will replace the existing install-recovery.sh and install-recovery-orig.sh files.
init.d - will be created if it's not there and will replace the existing same named files. Otherwise, tweak files will be placed into init.d folder.
busybox, sqlite3, zipalign will be placed into /system/xbin folder.
If you don't know what you're doing, please don't use this flashable zip file and ask first. I'm not responsible for any bricked pnones by using this tweak. So, do it with your own risk if you want to try.
Need more information? or for Q/A, please use my thread in here - Extend your Battery Life - init.d, build.prop and everything
Credit:
Big thanks to sfhub for this leaked rom. He is really quiet but taught me lots of things directly and indirectly thru XDA.
Calkulin - initially I got the idea about CPU tweaks through his tweaked ROMs. I've changed some of his tweaks when I applied into my CPU tweaks but the main concept is still following him.
VeNuM - Team VeNuM allowed me to use my tweaks against his Roms for his rom users. Special thanks to team VeNuM and their efforts!
tdunham for his great help and working with me to create flashable zip files. He also tested out Kobridge tweaks on Calkulin's 2v1.5 rom. Now he created the version 2.5 tweaks for Calk's rom (check out the second post)
Team ERA - Adapting various Kobridge tweaks on thier rom and to be a good friend
JohnCorleone - for his knowledge and adapting Kobridge tweaks on VeNum
many ROM devs and users inspiring me to move on
bigpeng, steve97ta for testing out on VeNuM_ICE_Rom_RL5.0.
Tewlman252 for testing out on AnaKonda Rom
jamice4u for testing out on HyDrA
What's in attchment?
Kobridge_xxxx_Tweaks_v2.4A.zip - aggressive tweak (all the tweaks are same, except cpu tweaks). Focused on more aggressive battery savings. So, sometimes you may see the lag time specially when you do the batch jobs. If you feel, it's kind of slow, use M tweak.
Kobridge_xxxx_Tweaks_v2.4M.zip - moderate tweak. should be fine for most cases and battery saving is still huge.
Update: Dropped one of screenshot because personal info was there.
Whoops - FE14 2.4M dropped also. Adding back...
Last screenshot added - more than 3 days. Huge drop at the last moment (phone call - check the signal bar )
Note:
For any previous stocked based ICS ROM users, you can use the most recent one but you will lose your current build related information. If you don't mind, flash the zip file that you want to use.
[Useful Hint]
If the batch job is taking long time when you use 'A' tweak, you can temporarily increase the CPU speed to maximum 1.2GHz by using a tool like System Tuner (Pro). By using this tool, if the job (something like removing bulk applications thru Rom Toolbox or backing up apps thru Titanium Backup) is slow, go to CPU settings and click the '+' button to increase the CPU speed until the job finished. After the job, just reset the CPU speed to 1GHz. In some case, the lag time is unavoidable because CPU is slowly trying to increase the CPU speed based on the CPU overload. If we make the CPU frequencies to be changed very fast, then it uses more battery. There's always pros and cons. If you use System Tuner (Pro), do not use the tweaks provided by System tuner pro with my tweaks in here.
[ROM specific instructions]
New! [5/21/12] Calkulin's 2 v1.5 Kobridge Tweak All-In-One pack by TDunham
The same Kobridge Tweak pack v2.5 used in VeNuM is now available for Calkulin's 2 v1.5 Rom users!
The installation instruction is same as for VeNuM ICE RL5.5 in below.
All thanks should go to TDunham. Download link is available at http://forum.xda-developers.com/showthread.php?t=1658471&page=12 and post #112.
For FE10 Stock based Rom Users - added same flashable zip files based on FE10 build.prop
For FD26 Stock based Rom Users - added two flashable zip files based on FD26 build.prop
New! [5/21/12] VeNum_ICE_Rom_RL5.5
Customized VeNum_ICE_Rom RL5.5 Kobridge All-in-One pack is available now!
Kobridge tweak changes for VeNuM RL5.5:
* Added every Kobridge tweak files into one zip file.
* No need to download the Kobridge tweak files again at least tweak version stays same.
* Including VeNuM stock tweaks - you can go back to original VeNuM tweaks without manual backup
* Easy tweak mode changes through the other set of flashable zip files
* you don't even need to repacked kernel to run the init.d. This tweak is already including the init.d support
* and more...
How to install:
1. Choose one of the flashable zip files from attachment -
Kobridge_VeNuM_RL5.5_Tweaks_v2.5AF.zip - Aggressive First install
Kobridge_VeNuM_RL5.5_Tweaks_v2.5MF.zip - Moderate First install
Kobridge_VeNuM_RL5.5_Tweaks_v2.5PF.zip - Performance First install
2. Flash the 2.5xF from recovery.
3. Reboot
How to change the tweak mode:
1. do not download zip file again. Just go to kernel recovery mode (not stock kernel)
2. choose zip file from /sdcard/VeNuM_Tweaks
3. Flash and reboot
How to go back to VeNuM default tweaks -
1. same as changing tweak mode but choose Kobridge_VeNuM_RL5.5_Tweaks_v2.5S.zip file.
2. flash and reboot.
My recommendation to select the tweak mode is, first try 2.5P tweak and if it's accpetable, then try 2.5M and 2.5P... If the lag time is not acceptable for you, just stay with VeNuM default tweaks.
Performance (from fast to slow) -
VeNum default > 2.5P > 2.5M > 2.5A
Battery savings
VeNuM dafault < 2.5P < 2.5M < 2.5A
VeNuM_ICE_Rom_RL5.0 - Download Kobridge Tweaks for VeNuM and flash it. VeNuM's default files will be backed up /sdcard/Venum_Tweaks folder including build.prop and install-recovery.sh. I decided to only place my tweaks into init.d folder because lots of overlaps. If anyone want to run default VeNuM tweaks, copy/move those tweak files from /sdcard/Venum_Tweaks to /system/etc/init.d. Be sure that I also moved VeNuM's build.prop and install-recovery.sh files to /sdcard/Venum_Tweaks backup folder. So, to go back, just place the all files from backup to the right places and reboot.
AnaKonda_Rom_v1 - Download Kobridge Tweaks for AnaKonda rom and flash it. AnaKonda's default files will be backed up /sdcard/AnaKonda_Tweaks folder including build.prop. If anyone want to run default AnaKonda tweaks, copy/move those tweak files from /sdcard/AnaKonda_Tweaks to /system/etc/init.d. Be sure that I also moved AnaKonda's build.prop to /sdcard/AnaKonda_Tweaks backup folder. So, to go back, just place the all files from backup to the right places and reboot.
[Updates] oldest (top) -> newest (bottom)
* Blu Kuban Rom - Sorry Blu Kuban users. I spent couple of hours to check this Rom. It appears that Blu Kuban requires its own build.prop and there are lots of settings here and there. No one wouldn't able to support this rom except the Dev.
* Just checked out VeNuM_ICE_Rom_RL5.0 - It seems like there's no problem flashing kobridge tweaks into this rom. No conflicts on build.prop. After flashing, goto /system/etc/init.d folder and change the file permission of 1VeNuM1 & 9darky_zipalign to 644. For 2VenuM2 file, keep the permission 755. If this file's permission is not 755, do not change and just keep the same permission.
I saw many useful tweaks on 2VenuM2. So, I do not want to prevent this tweak running on boot. After changing the permission, reboot the phone one more time to run the tweaks selectively again.
* Update for VeNuM_ICE_Rom_RL5.0 - it's working but need some modification. I'm working to release the flashable zip file for this rom. Thanks to bigpeng for testing this tweak out on his phone. 5/19/12 Added flashable zip file.
* AnaKonda_Rom_v1 - Not been tested yet. Need someone to test. Please report if you are using AnaKonda rom and willing to test it. If you want to apply this tweak, do it with your own risk.
* Update for VeNuM_ICE_Rom_RL5.0 - 2.4.1P version released for test purpose. If you experience the lags on VeNuM, try this one.
* Tweaks for VeNuM ICE RL5.5 released (5/21/12)
* Tweaks for Calk's 2 v1.5 (FD26) AIO tweak pack release by TDunham (5/21/12)
looks like you'll have to work on the FE16 now ;p Thanks for the work.
leaderbuilder said:
looks like you'll have to work on the FE16 now ;p Thanks for the work.
Click to expand...
Click to collapse
Just saw Calk's thread. Going to jump into!
Edit: just added FE10/FD26 Tweaks at second post.
Question: if im on calk's 1.5 with fe10 kernel/modem, i need to install the zip for calk's ROM right?
Good stuff, thanks!
Sent from my SPH-D710 using xda premium
FE16 is out, thanks for this, it is appreciated it
puff601 said:
Question: if im on calk's 1.5 with fe10 kernel/modem, i need to install the zip for calk's ROM right?
Click to expand...
Click to collapse
That's right. It's based on Rom version and not Kernel.
Just to 100% sure, if Im running Agat's tFE10_v0.1.0 Rooted, which of the 2 .zip files below should I run?
Also what is the difference between these 2 as they seem to be based on the same ROM version?
1) Kobridge_FE10_Tweaks_v2.4A.zip
2) Kobridge_FE10_Tweaks_v2.4M.zip
peterocc said:
Just to 100% sure, if Im running Agat's tFE10_v0.1.0 Rooted, which of the 2 .zip files below should I run?
Also what is the difference between these 2 as they seem to be based on the same ROM version?
1) Kobridge_FE10_Tweaks_v2.4A.zip
2) Kobridge_FE10_Tweaks_v2.4M.zip
Click to expand...
Click to collapse
A - Aggressive power savings mode - slower than 2.4M but batter saving is huge
M - Moderate power savings mode - faster than 2.4A while still extending the battery life
I'm running Calks FD26 1.5 ROM, the aggressive tweak and had the 3 or so second lag before screen wake on an incoming phone call.
I only bring it up to get further input from other users running the aggressive tweak as I've only seen it reported once before. I'm going to stick with it to see how that issue goes since it only happened once so far with the new set of tweaks (and everything is going VERY well).
Please report any other issues as they occur for Kobridge please so he can address any ongoing problems. Cheers! TD
tdunham said:
I'm running Calks FD26 1.5 ROM, the aggressive tweak and had the 3 or so second lag before screen wake on an incoming phone call.
I only bring it up to get further input from other users running the aggressive tweak as I've only seen it reported once before. I'm going to stick with it to see how that issue goes since it only happened once so far with the new set of tweaks (and everything is going VERY well).
Please report any other issues as they occur for Kobridge please so he can address any ongoing problems. Cheers! TD
Click to expand...
Click to collapse
tdunham, thanks!
Since the script has been changed a little to fix that issue, please use the latest one in this thread. It would make your phone more responsive than previous tweak.
hey kobridge,
here's a suggestion but I could be way off..
why not take the build.prop out of the flashable zip since it is version specific and instead just have it as a txt document with only the tweaks. and have the user paste it at the bottom of their current build.prop.
that way you wouldn't need to create flashable zips for each new leak..
maybe I'm just thinking about this all sideways..
I always just chop out tweaks from the build.prop of roms and have a big list that I paste at the bottom of the build.prop on any rom I use..
anyway, once again big thanks for your contributions kobridge.
gershee said:
hey kobridge,
here's a suggestion but I could be way off..
why not take the build.prop out of the flashable zip since it is version specific and instead just have it as a txt document with only the tweaks. and have the user paste it at the bottom of their current build.prop.
that way you wouldn't need to create flashable zips for each new leak..
maybe I'm just thinking about this all sideways..
I always just chop out tweaks from the build.prop of roms and have a big list that I paste at the bottom of the build.prop on any rom I use..
anyway, once again big thanks for your contributions kobridge.
Click to expand...
Click to collapse
I've already considered that option but incorrect editing of build.prop could be a reason of boot loop.
What I'm thinking about is, we may need to separate the build.prop and any other tweaks. So, user can flash the other tweak files separately. For the build.prop, because it's rom dependant, I may need to create a new one each time while keeping the other tweaks same.
Definitely I'll think about this. Thanks for your suggestion, gershee!
Thanks Kobridge -- your battery tweaks are phenomenal! Looking forward to FE16!!
Posted last screenshot from FE14 at OP - couldn't spend more time on FE14 because have to move on to FE16.
Too busy... FE10 -> FE14 -> FE16 in just couple of days. Maybe some of my tweaks are useless because none uses the previous ROM. Hope FE16 stay a little longer.
kobridge said:
I've already considered that option but incorrect editing of build.prop could be a reason of boot loop.
What I'm thinking about is, we may need to separate the build.prop and any other tweaks. So, user can flash the other tweak files separately. For the build.prop, because it's rom dependant, I may need to create a new one each time while keeping the other tweaks same.
Definitely I'll think about this. Thanks for your suggestion, gershee!
Click to expand...
Click to collapse
wish I could use all your init.d tweaks but I'm aosp for life..
I've included my build.prop tweaks.. basically I compiled a list of tweaks I was able to find about a month ago.. I think I may have incorporated your initial release not sure, but probably many redundancies. just thought I'd share.. I usually just jam this whole file at the end of the my new fresh build.prop..
can't give proper credit cause I went thread to thread reading about tweaks and then rom to rom checking out the build.prop..
so I guess thank you xda..
https://www.box.com/shared/969572e708315f41598b
EDIT:
oops.. I guess the purpose of this was to see.. well I dunna.. maybe see if there are more tweaks?
I know I haven't had any boot loops cause I keep my original build.prop from my rom and simple add/override certain settings..
just trying to help/contribute.
EDIT2:
they aren't all battery related tweaks.. just giving an idea..
gershee said:
wish I could use all your init.d tweaks but I'm aosp for life..
I've included my build.prop tweaks.. basically I compiled a list of tweaks I was able to find about a month ago.. I think I may have incorporated your initial release not sure, but probably many redundancies. just thought I'd share.. I usually just jam this whole file at the end of the my new fresh build.prop..
can't give proper credit cause I went thread to thread reading about tweaks and then rom to rom checking out the build.prop..
so I guess thank you xda..
https://www.box.com/shared/969572e708315f41598b
EDIT:
oops.. I guess the purpose of this was to see.. well I dunna.. maybe see if there are more tweaks?
I know I haven't had any boot loops cause I keep my original build.prop from my rom and simple add/override certain settings..
just trying to help/contribute.
EDIT2:
they aren't all battery related tweaks.. just giving an idea..
Click to expand...
Click to collapse
Couple of things for AOKP users.
1. build.prop needs to be updated since because AOKP check the build information during the boot. Based on build info, if it's not AOKP, phone wouldn't boot.
2. 31CPU tweak need to be modified or should not be used because it's causing a boot loop.
I've posted all this information in my original thread - http://forum.xda-developers.com/showthread.php?t=1625299
kobridge said:
Couple of things for AOKP users.
1. build.prop needs to be updated since because AOKP check the build information during the boot. Based on build info, if it's not AOKP, phone wouldn't boot.
2. 31CPU tweak need to be modified or should not be used because it's causing a boot loop.
I've posted all this information in my original thread - http://forum.xda-developers.com/showthread.php?t=1625299
Click to expand...
Click to collapse
1. yea i use my original build.prop and add tweaks to it.
2. yea I did independent testing on aokp and posted results 2 weeks ago in your thread here:
http://forum.xda-developers.com/showthread.php?p=25677347
pretty sure 41tweaks broke boot for me too but I guess I'll have to try once again!
thanks..
gershee said:
1. yea i use my original build.prop and add tweaks to it.
2. yea I did independent testing on aokp and posted results 2 weeks ago in your thread here:
http://forum.xda-developers.com/showthread.php?p=25677347
pretty sure 41tweaks broke boot for me too but I guess I'll have to try once again!
thanks..
Click to expand...
Click to collapse
One time, I tested it on AOKP build35. Because there's no way to check my tweaks on AOKP, I flashed AOKP to my phone and tested it out.
Build.prop and 31 tweak had the problem.
But again, currently I'm stick with stock based rom and I do not formally support AOKP or any other non-stock based ROMs.
lately I've found that some people are looking for more tweaks for SGY. you might have heard about v6 and adrenaline engine which can boost up our device performance. however, these script are usually only change the setting on memory management and kernel setting. I can't found a branded tweak with a script not only for memory management but also tweak gps, net speed, and build.prop properties tweak.
well...this mod is an one pack tweak for all that stuff. it contain all init.d tweak which used daily in my device. don't worry about the modules stuff since I already put them inside.
1. tweaks for modules : droidwall modules by mikstev and bacem patch by irfanbagus
2. tweaks for memory management : kuro1
3. tweaks for build.prop properties : kuro2
4. tweaks for net speed : sysinit --> sysctl tweaks
5. additional tweaks : zipalign, sqlite optimize, minfree, data cleaner, sdcard tweak (these last four are in kuro1), and gps tweaks.
6. add blocker tweak (new)
important notes:
1. this mod is only tested on SGY. please use it carefully if you intent to use it on another device.
2. installation guide: flash it via CWM.
3. I highly recommend to delete (or temporary move) all init.d script before install this mod (just in case, for your safety and to ensure that my tweak will run). you can put your favourite script later if the installation succes.
4. a kernel with init.d support is a minimum requirement for this mod.
5. to check whether if the tweak run or not go to /data and see if all of 4 log file tweak created there with correct time when you turn on your device.
- kuro_zalign.log : contain the log file for zipalign
- kuro_tweak1.log : contain the log file for kuro1 tweak
- kuro_tweak2.log : contain the log file for kuro2 tweak plus test for undervolt with bacem tweak
- kuro_slite.log : side log file for kuro1. it contain the log file for vacum tweak inside kuro1
the link :
]v1 : http://www.mediafire.com/download.php?51kxybm65dzxveb or http://d-h.st/7v7
v2 : http://d-h.st/AsD
v2.1 : http://d-h.st/HB4
v3.0 : http://www.mediafire.com/download.php?vv0e2nmzrnm7q3o
v3.1 : http://www.mediafire.com/download.php?9ua4lz8wafqq79w
note: don't install by copy all the files into your system. you only need to copy the 'blast' file in /system/bin/ to your /system/bin and give 777 permission to get the update.
add blocker : http://www.mediafire.com/download.php?2bqcgbkt01banl6
to install it, extract the file then copy hosts file to /system/etc. after that restart your phone.
changelog:
v1 (17-7-2012)
- first release project
v2 (8-7-2012)
- log system introduced. log file stored at /data as kuro_zalign.log, kuro_tweak1.log, kuro_tweak2.log and kuro_sqlite.log
- optimized. kickass kernel tweak now in kuro1.
- added some more tweak for memory cleaner and another stuff.
- loopysmoothness removed due some issue in some highly loaded system.
- GPS tweak now set for all region and country
v2.1 (21-8-12)
- new script added
- optimized tweak for better multitasking and speed
- now using aroma installer
v3.0 (4-10-12)
- new build script on kuro1
- separated sqlite vacuum (kuro4)
- new setprop code on (kuro2)
- new setprop code for audio (kuro3)
- NEW FEATuRE: boost_up MODE! --> a special feature to give you more free ram and boost your memory
v3.1 (12-12-12)
- new update for the tool. now you can use it without typing su.
- tool renamed to 'blast' to make it shorter.
Click to expand...
Click to collapse
additional note for v3:
- clear your dalvik cache after you install this tweak
- to use boost_up mode, type su, continued by boost_up in terminal
- THIS TWEAK ONLY TESTED ON MY XPERIA TIPO. PLEASE QUICKLY REPORT IF ANYTHING GOES WRONG.
for more information about the modules
bacem patch [irfanbagus] - http://forum.xda-developers.com/showthread.php?t=1640972
droidwall [mikstev] - http://forum.xda-developers.com/showthread.php?t=1626406
credits:
1. mikstev and irfanbagus for the modules
2. imbawind for the libncurses.so file
3. all xda member
I'm not a dev. all credits should be addressed to the dev, the real man behind the work. not me
Click to expand...
Click to collapse
TERM OF USE AND SHARING:
this thread intent is for sharing. feel free to use, edit, distribute all material inside this thread which came from me. if there any parts of this mod which comes not from me please refer to the original dev I've mentioned in this thread. if want to share it to another forum or modify it you don't have to ask my permission. no need to credits, put links or whatsoever. you'll only need to remember that you should held all the responsibility by using this mod, modify it or distribute it. DO IT WITH YOUR OWN RISK
Click to expand...
Click to collapse
Sparepart app
this app won't give you a boost in your device's performance. its an app comes from aosp rom. you can use it to set the animation effect in your device. set the speed at 'fast' and you'll get a feel that your device is running zoom zoom zoom.
http://www.mediafire.com/?ckcq1c6k6fr86s2
I also want to make this thread as a tweak discussion. feel free if you want to discuss anything related to tweaks in this thread.
This is exactly the same tweaks I've mentioned before . I was lazy to explain You did a nice job in compiling them. Good post.
Sent from my GT-S5360 using xda premium
yup...I only create kuro1, kuro2, sysctl.conf. I've also edited gps.conf (previously made by hellstorm) and bacem tweak. however the other script is almost untouched.
Can i flash this tweak pack on galaxy y which is already using adrenaline engine....plz answer it....
you can but better if you don't. if you still want to use it, delete kickass kernel, kuro2, darky zipalign, sysctl, complete and sqilte optimize from my zip file then flash it.
can i flash this on galaxy y duos ????
BTW . if any problem i m reflash firmware....
Sent from my GT-S6102 using Tapatalk 2
the only thing missing is the ad-hoc mod
another great work mr. kurotsugi
edit: i was hoping no FC on the spare parts battery history..
@mano: yup...you can install it in duos
@leo: i'm still using it but i've got report that it has bug. I never experienced it but they said that the connection sometimes doesn't stable. Thats why i didn't put that in this tweak.
Sorry, this app is have that fc issue too.
kurotsugi said:
@mano: yup...you can install it in duos
@leo: i'm still using it but i've got report that it has bug. I never experienced it but they said that the connection sometimes doesn't stable. Thats why i didn't put that in this tweak.
Sorry, this app is have that fc issue too.
Click to expand...
Click to collapse
ahh.. i see
no need to say sorry
ps: can't test this atm
any ideas to make our internal memory as swap?
i heard swapping degrades memory card life so...
also..
add your sound tweaks in this pack + bravia engine...
Can u add this...
This is a lag free script from this threads...
http://forum.xda-developers.com/showthread.php?p=26365844
█✘•⊥•✘█
for the tuned megabassbeat: my sound mod is big, about 8mb and not everyone like to use it.
for the lagfree script: do you know that lag free mod will DELETE our system app? if the answer is yes, you should understand that the risk is too high for common user. I won't add that mod to my compilation script.
idea to make swap in internal mem?
using internal mem as swap have a risk that the internal memory might corrupted (and eternally couldn't repaired). --> the main reason why no one ever interested to use internal memory as swap.
are you still want to use it as swap?
kurotsugi said:
for the tuned megabassbeat: my sound mod is big, about 8mb and not everyone like to use it.
for the lagfree script: do you know that lag free mod will DELETE our system app? if the answer is yes, you should understand that the risk is too high for common user. I won't add that mod to my compilation script.
Click to expand...
Click to collapse
Oh....ok, if you no add this script
Thanks this explain(penjelasannya)
█✘•⊥•✘█
But,...i have error with kernel merruk pre2.0
setprop can't use in me...
How can i fix this?
How i change the kernel with repencis kernel?
█✘•⊥•✘█
first of all you should flash a stock kernel with odin. after that you could install repencis's kernel with usual method.
kurotsugi said:
using internal mem as swap have a risk that the internal memory might corrupted (and eternally couldn't repaired). --> the main reason why no one ever interested to use internal memory as swap.
are you still want to use it as swap?
Click to expand...
Click to collapse
if that so...
haha..
no way.
thanks man.
What would be the best things to do to use V6 SuperCharger for best performance of R800i?
I know how to install it, with script manager, but there is alot of things to tweak in the menu. plus I dont know which "HP" would be the best for R800i.
Recommended a step-by-step guide on what would be best for this phone - if I have never run this script before thanks!
U will need busybox installer too, just run the script after installed busybox
I recommend version 1.18.2 busybox, use another will make some errors, otherwise it will work..
run the script and follow the instruction, its easy, just followin what the script say, u may not run this script on boot, so if there is a question answer no..
Choose number 10 for quick auto customizing or between 11-13 option to make u home supercharged, u can try other too
Sory for my bad english
Regards from Lucian
Xperia Play with True Ancestor Rom modded myself..
Locked Bootloader
Black ops zombies crashes, modern combat 3 stutters all the time and temple run starts stuttering after some time. My phone is rooted so are there any optimizations i can do? Will uninstalling some appplications help? Because I have a lot. Please help. I want to play these games smoothly.
Sent from my R800i using Tapatalk 2
Overclock + RAM Manager + Supercharger v6
Sent from my awesome Xperia Play
About that v6 supercharger. I am unable to install busybox. Any fix?
Sent from my R800i using Tapatalk 2
Heres what you will do TC
1- download lightning launcher and dont add any widgets or fancy stuff
its uglier than most launchers , but its also the least consuming launcher out there. it barely uses 10mb of ram when active and like 6-4 when idle
2- install v6 supercharger
dont worry about it , its almost fool proof
as for busybox , you need the supercharger starter kit .
"Using SuperCharger Starter Kit (Prepares your ROM with the fixed su binary, zipalign binary, sqlite3 binary and busybox v1.19.4... and does NOT include the V6 SuperCharger scipt):
- Extract the zip to the root of the sdcard and it will all be in /sdcard/SuperCharger_Starter_Kit
- With Script Manager, just run StartMeUp.sh to install everything at once.
- Or, in terminal do: su, enter, sh /sdcard/Super*/Start*"
download the starter kit (ctrl+f starter) from here , and also the latest version of supercharger
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
3- as for options i personally use HARD TO KILL launcher and custom preset i got from another app
try using them yourself if you want , just search for the option that says "v6 custOOMizer"
and add this values
10.16.32.74.86.92
4- v6 supercharger is almost foolproof but you should always have a nandroid backup , just in case. I have never heard about anyone messing up the process though , its that safe.
5- dont use any other ram tools or boosters!
ALTERNATE OPTION!
search the playstore for GameBooster and buy it . For some users , in some games , it CAN improve performance. I think my method is better though
Ok thanks for the tips. I had to reroot, install busybox and now i am getting:
Warning: incompatibility error.
A memory app of questionable integrity found!
What does this mean and which "cr-app" do I have to uninstall?
Ram manager pro or auto killer, most likely... Game booster too.
Anything that deals with ram
Sent from my R800i using Tapatalk 2
I recommend
I recommend you use busybox 1.8.4 for me it was the only busybox able to make v6 SC run well also use busybox installer is in play store it lets you choose the best version of busybox.
Let's say on aokp, cm and sbean (allstar)
Fresh, I meant before restoring any app or doing anything
Post your results if you remember please
nabilbek said:
Let's say on aokp, cm and sbean (allstar)
Fresh, I meant before restoring any app or doing anything
Post your results if you remember please
Click to expand...
Click to collapse
This is highly dependent on the ROM in what codebase is it using [be it ICS, JB, Gignergread whatever], what apps it installs, what is in use when you check the free RAM, what you check as free RAM [some apps count the cached data as RAM, some give you the direct free RAM]. What apps you had in your /data if you did not wipe it. Etc Etc Etc
This is very subjective to just ask for and hard to give a direct answer on.
For instance I am running ParanoidAndroid and have around 135 apps and right now I just ran Fast Engine Flush [a script found in Supercharger V6 search XDA it is super popular and easy to find]. it is stating I have 163M of true free RAM [not counting cache].
If you want to try download Supercharger V6 script [don't worry about any modifications to services.jar or anything else talked about I am not having you do a supercharge on your device just run it, and when you get through the settings walkthrough [just say no to run on boot to any scripts [first run runs through like install type options],
Once you see the main menu put in the number for Fast Engine Fush and hit enter when prompted. After running it from inside script you can use script manager to got to /sdcard/Supercharger_V6 and set a shortcut right to fast engine flush [I use Script manager widget on my home screen even]
That way it not only can tell you how much RAM you have it clears out the stuff in use that is not needed and if you set it on home screen you can tap it there anytime to just clear the RAM [say right before playing a game] for the best performance [memory wise].