Develop Bugs

[GUIDE] V6 Supercharger Update 9 RC 8.2 + for Samsung Galaxy Young

V6 Supercharger Update 9 RC 8.2 + for Samsung Galaxy Young
NOTE:
I spent hours updating my guides and I don't ask you to press that THANKS button, be kind enough not to copy my guides to other forums. I know some noobs want to make a name on other forum boards... but hey, that's not an excuse! ​First off, I am not the developer of V6 Super Charger. It is created by zeppelinrox.UPDATES:
05-29-12
Added Common Errors/Problem + Fix for quick troubleshooting. If you get error that is not listed or any problem you have, please be kind enough to send me a message and report.
05-04-12
Updated Guide to V6 SuperCharger UPDATE 9 RC 8.2
Updated Guide to KickAssKernelizerInstaller UPDATE 3 RC8
Updated Guide Format: Detailed Guide + Quick Guide
This is a complete guide for Samsung Galaxy Young Users to make sure you get 100% Supercharger Level.
Detailed Guide
Quick Guide
REQUIREMENTS:1. BusyBox Installer [DOWNLOAD]
2. Script Manager [DOWNLOAD]
3. V6 SuperCharger Script [DOWNLOAD]
4. KickAss Kernalizer Script [DOWNLOAD]​
DETAILED GUIDE (Preferably for first time superchargers)
V6 Supercharger Update 9 RC 8.29 GuideI. INITIAL SETUP1. Download and Install the required apps (BusyBox + ScriptManager) to run this script.​2. Install BusyBox and select BusyBox version v1.16.2 or higher.NOTE:
Reboot your phone after installation. This is optional but recommended specially if you are upgrading from a lower version of BusyBox.​3. Install Script Manager​4. Open Script Manager and grant SuperUser Access
Tap on Menu > Advanced Options > Config
Scroll down until you see Browse as Root
Tap on it and press the back button to save
Once again grant Script Manager SuperUser Access to save config
Exit Script Manager
5. Open Script Manager and browse for V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf
Tap on it and set properties to:
Favorites (Star Icon)
Root (Green Android Skull Icon)
After setting properties, tap on Run to execute the script installer
When executed, it will do initial test, be patient and wait for it to complete its tasks
II. SUPERCHARGER INITIAL SETUP6. A bunch of text will start scrolling on your screen . . . and will ask you if
1. Home Locked in Memory?
· Type N for No and then press enter and another enter to continue to drivers console​7. First time SuperChargers will make a pit stop at Driver Options and set the following for Driver Options:1. Scrolling Speed : 1 (Fast)
2. Use Build.Prop? : n (No) to use local.prop
3. Fix Emissions on Boot – just press enter to proceed
4. Run Fix Emissions on Boot? : y (Yes) to run Fix Emissions on BootThis will fix app permissions to avoid force closes​5. Integrate? : y (Yes)
6. Disable Cool Animations? : y (Yes) to speed up execution of script​8. Press enter to return to drivers Console. Pressing enter will automatically run Quick V6 Cust-OOMizer and will calculate optimum SuperMinFree values1. Apply SuperMinFree Calculator Settings? : y (Yes) to apply calculated MinFree values so you don’t need to choose from 512 HP, but if you wish to select between 5-7, you need to complete supercharger initial setup and then run supercharger and then select 5-7.5. UnLedded (Multitasking){8,14,40,50,60, 75 MB}
6. Ledded (Balanced){8,14,55,70,85,100 MB}
7. Super UL (Aggressive){8,14,75,90,95,125 MB}​2. Press The Enter Key... – just press on enter key to continue. This action will backup Re-SuperCharger files to SD Card .
3.SuperClean & ReStart : y (Yes) to SuperClean & ReStart.This will wipe your dalvik-cache and bootup time will take 1-2 minutes depending on the number of apps installed on your phone.​9. After restart, Open Script Manager and:1. Go to /system/etc/init.d
2. Tap on S99SuperCharger and set the following properties:
Favorites (Star Icon)
Root (Green Android Skull Icon)
Start on Boot (Gear Icon)
3. Tap on Save
4. Close Script Manager and Restart your phone​NOTE:
If you don’t follow step 9, you will get an error the next time you run the script and it will show you owner’s handbook on your default web browser.​III. BULLETPROOF LAUNCHER10. After restart, open Script Manager and Run V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf, If you added it to favorites, tap on Menu > Favorites and then tap on V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf to run it and proceed in applying BulletProof Launcher:1. SuperCharger will run Test Drive, just wait for it to finish and then continue to the Drivers Console.
2. On the Drivers Console select:
13 for OOM Grouping Fixes + BulletProof Launcher
3. BulletProof? : y (Yes) to apply BulletProof Launcher
4. Press Enter to go back to Drivers Console​IV. NITROLAG NULLIFIER11. Back to the Drivers Console, select:
21. Nitro Lag Nullifier {Experimental}
Enter (N)ullify, (U)n-Nullify, E(X)it: N (Nullify) to apply Nitro Lag Nullifier
After applying Nitro Lag Nullifier, press enter to go back to Drivers Console.
V. ENGINE FLUSH12. Back to the Drivers Console, select:
18. Engine Flush {ReCoupe RAM & Kill Lag}Continue and drop all file system caches? : y (Yes) to clear system cache on RAM
After Engine Flush, press enter to go back to Drivers Console.
VI. SUPERCLEAN AND RESTART13. Back to the Drivers Console, select:
30. SuperClean & ReStart {Wipe Dalvik & Reboot}
Do you want to SuperClean & ReStart now? : y (Yes) to commence SuperClean and Restart
VII. VERIFY SUPERCHARGER STATUS14. After restart, Open Script Manager and run V6 SuperCharger again. You should see Supercharger Level: 100% ​QUICK GUIDE (for lazy guys and gals)I. INITIAL SETUPDriver Options
1. Scrolling Speed:
1 (fast)
2. Do you want to use Build.prop:
N (for now)
This option will use Local.prop. If it doesn't exist, it will be automatically created​3. Run Fix Emissions on Boot?
Y
This option will fix App FC's at boot​4. Integrate?
Y
5. Disable Animation?
Y
II. SUPERCHARGER INITIAL SETUPThis will automatically run and saves you time and social energy wether to select options 5-7 from the drivers console 1. Apply MinFree values?
Y
2. Super Clean and Restart?
Y
wipes dalvik-cache​III. BULLETPROOF LAUNCHER1. 13 for OOM Grouping Fixes + BulletProof Launcher
BulletProof?
Y
IV. NITRO LAG NULLIFIER1. 21. Nitro Lag Nullifier {Experimental}
N
Apply Nitro Lag Nullifier​VI. ENGINE FLUSH1. 18. Engine Flush
Continue and drop all file system caches?
Y
VI. SUPERCLEAN AND RESTART1. 30. SuperClean & ReStart
Y
KickAss Kernelizer GuideREQUIREMENTS:
KickAss Kernalizer Script [DOWNLOAD]
Script Manager [DOWNLOAD]
STEPS:
1. Assuming you already have Script Manager installed, Open Script Manager.
2. Browse for KickAssKernelizer_Tweaks_Installer_Update_3_RC8.sh.pdf and set properties to Favorites and Superuser then tap on Ru
3. It will show a bunch of text scrolling down...
4. When it asks for an input (KickAss/Chew Gum/KAK Stick/Exit), type K for KickAss and press enter
5. Now the script will ask you, whether you want to enable I/O Scheduler. Select Yes to enable I/O Scheduler.
6. After that, reboot your device
7. Open Script Manager again and navigate to system/etc/init.d folder and look for S98KickAssKernalizer script.Set the properties to:Superuser and Run at Boot and favorites (optional) and tap on Save.​You will notice that the icon of the script changed to green android skull+gear+star, if so, you are on the right path.​8. Reboot your device and see the increase in speed and performance
9. Optionally you can install No-Frills CPU Control to manage CPU Governors and I/O Schedulers available on your phone including the one from KickAss Kernalizer​This works for STOCK and Custom ROMs tested on my SG
Thanks to Zeppelinrox for this awesome tweak​Common Errors/Problems + FIXDone every step but still my phone gets supercharged at 75% only, what should I do?
The solution depends on the error that you get, In my experience, I only had one. That is "minfree values are not applied" if you get that error, that means S99SuperCharger.sh did not ran at boot. Go back and do STEP 9.​After installing the scripts, my apps get force close's. How do I fix this, It's really annoying!
Relax, Calm down. Run the script again and select:
Code:
[B]20. Fix Emissions {Fix FCing Errors}[/B]
That should take care of FC's​The script is not working, It says "not compatible"
Well, for a guide written for Samsung Galaxy Young GT-S5360, that's a joke. Update your BusyBox, and make sure you read busybox's instruction for installation inside the app itself to have it installed properly.​

Could you plz tell me what does this v6 support charger does ??
Sent from my GT-S5360 using XDA

A thread like this was already closed in the Android Development section. You gotta ask for Zippelinrox's approval first before opening a thread about Supercharger.

Actually, it's fine to make a thread/tutorial/guide anywhere.
I only ask that people link to my thread and don't attach or mirror my scripts which would get outdated pretty quick.
This way, chances are users will have the most up to date version.
So did you mean this thread?
http://forum.xda-developers.com/showthread.php?t=1549805
That was closed due to [email protected] being an ass and full of himself more than me
But he's been banned 3 times since then (once using a weird greek name I guess and the other name was zeppelinrox_sucks or something LOL

The local prop didnt work for me so instead of local prop i used buildprop, im using latest script. btw wheres the tut for KaK? and whats the use of ENGINE FLUSH? im now supercharged 100 but my ram is lil bit high.

renr29 said:
The local prop didnt work for me so instead of local prop i used buildprop, im using latest script. btw wheres the tut for KaK? and whats the use of ENGINE FLUSH? im now supercharged 100 but my ram is lil bit high.
Click to expand...
Click to collapse
Engine flush eliminates lag and boosts your phone's performance. It's actually indicated on what it actually do when you select this option in V6 Supercharger Installer.
NOTE:
Updated the thread. Added Kick Ass Kernalizer for SGY.

I dont feel the change , my ram is still high

renr29 said:
I dont feel the change , my ram is still high
Click to expand...
Click to collapse
Perhaps you have memory hog applications. Try using a swap file to increase your free RAM.

I dont have any installed apps.

i'm using this last time, the original rom of galaxy y . but when i flashed DXLA1 by doky, keyboard doesn't work so, i used 3rd party keyboards. it really works man!

Battery drain
Once i installed this v6 super charger my battery drains more faster!
how to uninstall this?!

Sir ive installed the v6 last month my bat was strong, hard to drain but now its not, looks like v6 is not workin

JPogeXD said:
Once i installed this v6 super charger my battery drains more faster!
how to uninstall this?!
Click to expand...
Click to collapse
Run V6 Supercharger and select Un-supercharge and Un-kernalize for a clean removal of scripts.
Sent from my GT-S5360 using xda premium

please update the guide for V6 SuperCharger Update 9 RC8.2. because the guide is for RC6.9 and the number codes for RC8.2 is different from the earlier updates. hope you would :3

macmicmoi said:
please update the guide for V6 SuperCharger Update 9 RC8.2. because the guide is for RC6.9 and the number codes for RC8.2 is different from the earlier updates. hope you would :3
Click to expand...
Click to collapse
Updated to RC 8.2

Local prop dont work for me -____- only build

thanks:banghead:
Sent from my GT-S5360 using xda premium

renr29 said:
Local prop dont work for me -____- only build
Click to expand...
Click to collapse
That's fine. Bulletproof Launcher requires Build.prop
Sent from my GT-S5360 using xda premium

What about local prop???

renr29 said:
What about local prop???
Click to expand...
Click to collapse
It DOES work on local.prop.

[MOD] one pack tweaks compilation (gps-net-memory)

lately I've found that some people are looking for more tweaks for SGY. you might have heard about v6 and adrenaline engine which can boost up our device performance. however, these script are usually only change the setting on memory management and kernel setting. I can't found a branded tweak with a script not only for memory management but also tweak gps, net speed, and build.prop properties tweak.
well...this mod is an one pack tweak for all that stuff. it contain all init.d tweak which used daily in my device. don't worry about the modules stuff since I already put them inside.
1. tweaks for modules : droidwall modules by mikstev and bacem patch by irfanbagus
2. tweaks for memory management : kuro1
3. tweaks for build.prop properties : kuro2
4. tweaks for net speed : sysinit --> sysctl tweaks
5. additional tweaks : zipalign, sqlite optimize, minfree, data cleaner, sdcard tweak (these last four are in kuro1), and gps tweaks.
6. add blocker tweak (new)
important notes:
1. this mod is only tested on SGY. please use it carefully if you intent to use it on another device.
2. installation guide: flash it via CWM.
3. I highly recommend to delete (or temporary move) all init.d script before install this mod (just in case, for your safety and to ensure that my tweak will run). you can put your favourite script later if the installation succes.
4. a kernel with init.d support is a minimum requirement for this mod.
5. to check whether if the tweak run or not go to /data and see if all of 4 log file tweak created there with correct time when you turn on your device.
- kuro_zalign.log : contain the log file for zipalign
- kuro_tweak1.log : contain the log file for kuro1 tweak
- kuro_tweak2.log : contain the log file for kuro2 tweak plus test for undervolt with bacem tweak
- kuro_slite.log : side log file for kuro1. it contain the log file for vacum tweak inside kuro1
the link :
]v1 : http://www.mediafire.com/download.php?51kxybm65dzxveb or http://d-h.st/7v7
v2 : http://d-h.st/AsD
v2.1 : http://d-h.st/HB4
v3.0 : http://www.mediafire.com/download.php?vv0e2nmzrnm7q3o
v3.1 : http://www.mediafire.com/download.php?9ua4lz8wafqq79w
note: don't install by copy all the files into your system. you only need to copy the 'blast' file in /system/bin/ to your /system/bin and give 777 permission to get the update.
add blocker : http://www.mediafire.com/download.php?2bqcgbkt01banl6
to install it, extract the file then copy hosts file to /system/etc. after that restart your phone.
changelog:
v1 (17-7-2012)
- first release project
v2 (8-7-2012)
- log system introduced. log file stored at /data as kuro_zalign.log, kuro_tweak1.log, kuro_tweak2.log and kuro_sqlite.log
- optimized. kickass kernel tweak now in kuro1.
- added some more tweak for memory cleaner and another stuff.
- loopysmoothness removed due some issue in some highly loaded system.
- GPS tweak now set for all region and country
v2.1 (21-8-12)
- new script added
- optimized tweak for better multitasking and speed
- now using aroma installer
v3.0 (4-10-12)
- new build script on kuro1
- separated sqlite vacuum (kuro4)
- new setprop code on (kuro2)
- new setprop code for audio (kuro3)
- NEW FEATuRE: boost_up MODE! --> a special feature to give you more free ram and boost your memory
v3.1 (12-12-12)
- new update for the tool. now you can use it without typing su.
- tool renamed to 'blast' to make it shorter.
Click to expand...
Click to collapse
additional note for v3:
- clear your dalvik cache after you install this tweak
- to use boost_up mode, type su, continued by boost_up in terminal
- THIS TWEAK ONLY TESTED ON MY XPERIA TIPO. PLEASE QUICKLY REPORT IF ANYTHING GOES WRONG.
for more information about the modules
bacem patch [irfanbagus] - http://forum.xda-developers.com/showthread.php?t=1640972
droidwall [mikstev] - http://forum.xda-developers.com/showthread.php?t=1626406
credits:
1. mikstev and irfanbagus for the modules
2. imbawind for the libncurses.so file
3. all xda member
I'm not a dev. all credits should be addressed to the dev, the real man behind the work. not me
Click to expand...
Click to collapse
TERM OF USE AND SHARING:
this thread intent is for sharing. feel free to use, edit, distribute all material inside this thread which came from me. if there any parts of this mod which comes not from me please refer to the original dev I've mentioned in this thread. if want to share it to another forum or modify it you don't have to ask my permission. no need to credits, put links or whatsoever. you'll only need to remember that you should held all the responsibility by using this mod, modify it or distribute it. DO IT WITH YOUR OWN RISK
Click to expand...
Click to collapse

Sparepart app
this app won't give you a boost in your device's performance. its an app comes from aosp rom. you can use it to set the animation effect in your device. set the speed at 'fast' and you'll get a feel that your device is running zoom zoom zoom.
http://www.mediafire.com/?ckcq1c6k6fr86s2

I also want to make this thread as a tweak discussion. feel free if you want to discuss anything related to tweaks in this thread.

This is exactly the same tweaks I've mentioned before . I was lazy to explain You did a nice job in compiling them. Good post.
Sent from my GT-S5360 using xda premium

yup...I only create kuro1, kuro2, sysctl.conf. I've also edited gps.conf (previously made by hellstorm) and bacem tweak. however the other script is almost untouched.

Can i flash this tweak pack on galaxy y which is already using adrenaline engine....plz answer it....

you can but better if you don't. if you still want to use it, delete kickass kernel, kuro2, darky zipalign, sysctl, complete and sqilte optimize from my zip file then flash it.

can i flash this on galaxy y duos ????
BTW . if any problem i m reflash firmware....
Sent from my GT-S6102 using Tapatalk 2

the only thing missing is the ad-hoc mod
another great work mr. kurotsugi
edit: i was hoping no FC on the spare parts battery history..

@mano: yup...you can install it in duos
@leo: i'm still using it but i've got report that it has bug. I never experienced it but they said that the connection sometimes doesn't stable. Thats why i didn't put that in this tweak.
Sorry, this app is have that fc issue too.

kurotsugi said:
@mano: yup...you can install it in duos
@leo: i'm still using it but i've got report that it has bug. I never experienced it but they said that the connection sometimes doesn't stable. Thats why i didn't put that in this tweak.
Sorry, this app is have that fc issue too.
Click to expand...
Click to collapse
ahh.. i see
no need to say sorry
ps: can't test this atm

any ideas to make our internal memory as swap?
i heard swapping degrades memory card life so...
also..
add your sound tweaks in this pack + bravia engine...

Can u add this...
This is a lag free script from this threads...
http://forum.xda-developers.com/showthread.php?p=26365844
█✘•⊥•✘█

for the tuned megabassbeat: my sound mod is big, about 8mb and not everyone like to use it.
for the lagfree script: do you know that lag free mod will DELETE our system app? if the answer is yes, you should understand that the risk is too high for common user. I won't add that mod to my compilation script.

idea to make swap in internal mem?

using internal mem as swap have a risk that the internal memory might corrupted (and eternally couldn't repaired). --> the main reason why no one ever interested to use internal memory as swap.
are you still want to use it as swap?

kurotsugi said:
for the tuned megabassbeat: my sound mod is big, about 8mb and not everyone like to use it.
for the lagfree script: do you know that lag free mod will DELETE our system app? if the answer is yes, you should understand that the risk is too high for common user. I won't add that mod to my compilation script.
Click to expand...
Click to collapse
Oh....ok, if you no add this script
Thanks this explain(penjelasannya)
█✘•⊥•✘█

But,...i have error with kernel merruk pre2.0
setprop can't use in me...
How can i fix this?
How i change the kernel with repencis kernel?
█✘•⊥•✘█

first of all you should flash a stock kernel with odin. after that you could install repencis's kernel with usual method.

kurotsugi said:
using internal mem as swap have a risk that the internal memory might corrupted (and eternally couldn't repaired). --> the main reason why no one ever interested to use internal memory as swap.
are you still want to use it as swap?
Click to expand...
Click to collapse
if that so...
haha..
no way.
thanks man.

[Q] Andromadus Mimicry 1.1.1 + V6 Supercharger minfree doesn't persist

I just installed Andromadus Mimicry 1.1.1 that comes with Supercharger preconfigured.
Deciding to tweak the settings further, I installed the newest Supercharger script (Update 9 RC9) and everything seems to go fine except that my minfree values do not stick.
Tried to update the services.jar but the scripts ICS service center and the Webapp at http://android.mimic.ca/ both indicate that my services.jar is already supercharged and applied.
Am I not suppose to fool around with the Mimicry Supercharger settings? Or is there something I'm missing? Another user commented on checking my settings within the ROM CONTROL settings but I do not believe this rom has that feature.
Any advice?

baifengz said:
I just installed Andromadus Mimicry 1.1.1 that comes with Supercharger preconfigured.
Deciding to tweak the settings further, I installed the newest Supercharger script (Update 9 RC9) and everything seems to go fine except that my minfree values do not stick.
Tried to update the services.jar but the scripts ICS service center and the Webapp at http://android.mimic.ca/ both indicate that my services.jar is already supercharged and applied.
Am I not suppose to fool around with the Mimicry Supercharger settings? Or is there something I'm missing? Another user commented on checking my settings within the ROM CONTROL settings but I do not believe this rom has that feature.
Any advice?
Click to expand...
Click to collapse
The webapp is actually created by me (as is Mimicry). That said, when you install the V6 Supercharger mod within Aroma on Mimicry it will copy over the patched services.jar, so that part is accurate. The newest version of the script has no added effect in terms of minfrees/oom groupings. It's the exact same as it has been for months now, so upgrading versions of the script doesn't matter so much.
If you want to run V6 Supercharger manually, do not select the V6 Supercharger option when you install the ROM, but as I said, there's no point really.

blk_jack said:
If you want to run V6 Supercharger manually, do not select the V6 Supercharger option when you install the ROM, but as I said, there's no point really.
Click to expand...
Click to collapse
Thanks for the clarification. I wanted to run the script manually to make sure Nitro Lag Nullifier was running as well as possibly try to bulletproof some apps. I had to re-run Aroma and uninstall the preconfigured Andromadus script and ran it manually.
But if you say there's no point to this (for our phone?) then I'll take your word for it.
Thanks for all the hard work!

Beware of Nitro Lag Nullifier on ICS.. When I tested it last it seemed to negatively affect performance!
When enabling V6 Supercharger on Mimicry it actually creates a file to run on boot that's identical to the one the V6 Supercharger script creates. The difference is that you don't have to install Script Manager or patch services.jar or re-run anything everytime you flash a new version of the ROM.
Hope that helps clarify
Sent from my HTC Vision using xda premium

[Q] V6 SuperCharger - best for performance?

What would be the best things to do to use V6 SuperCharger for best performance of R800i?
I know how to install it, with script manager, but there is alot of things to tweak in the menu. plus I dont know which "HP" would be the best for R800i.
Recommended a step-by-step guide on what would be best for this phone - if I have never run this script before thanks!

U will need busybox installer too, just run the script after installed busybox
I recommend version 1.18.2 busybox, use another will make some errors, otherwise it will work..
run the script and follow the instruction, its easy, just followin what the script say, u may not run this script on boot, so if there is a question answer no..
Choose number 10 for quick auto customizing or between 11-13 option to make u home supercharged, u can try other too
Sory for my bad english
Regards from Lucian
Xperia Play with True Ancestor Rom modded myself..
Locked Bootloader

How much Free Ram should one have after a fresh flash?

Let's say on aokp, cm and sbean (allstar)
Fresh, I meant before restoring any app or doing anything
Post your results if you remember please

nabilbek said:
Let's say on aokp, cm and sbean (allstar)
Fresh, I meant before restoring any app or doing anything
Post your results if you remember please
Click to expand...
Click to collapse
This is highly dependent on the ROM in what codebase is it using [be it ICS, JB, Gignergread whatever], what apps it installs, what is in use when you check the free RAM, what you check as free RAM [some apps count the cached data as RAM, some give you the direct free RAM]. What apps you had in your /data if you did not wipe it. Etc Etc Etc
This is very subjective to just ask for and hard to give a direct answer on.
For instance I am running ParanoidAndroid and have around 135 apps and right now I just ran Fast Engine Flush [a script found in Supercharger V6 search XDA it is super popular and easy to find]. it is stating I have 163M of true free RAM [not counting cache].
If you want to try download Supercharger V6 script [don't worry about any modifications to services.jar or anything else talked about I am not having you do a supercharge on your device just run it, and when you get through the settings walkthrough [just say no to run on boot to any scripts [first run runs through like install type options],
Once you see the main menu put in the number for Fast Engine Fush and hit enter when prompted. After running it from inside script you can use script manager to got to /sdcard/Supercharger_V6 and set a shortcut right to fast engine flush [I use Script manager widget on my home screen even]
That way it not only can tell you how much RAM you have it clears out the stuff in use that is not needed and if you set it on home screen you can tap it there anytime to just clear the RAM [say right before playing a game] for the best performance [memory wise].