Related
So lately I've been having problems with my DI2. Occasionally, when I unlock, it appears to receive what it thinks is a touch at a lower portion, usually around the middle of the lower portion, of the screen, and this results in things like Home being activated, or the app drawer. This will happen even if no part of my hand is near the bottom of the phone (front, back, and sides).
More recently, it has become and indication of random touching on lower parts of the screen. I've had it completely freak out and type random stuff in input fields. When it gets really bad, the touchscreen stops responding, but I can lock and unlock to get it back, usually.
This has made typing in portrait mode quite difficult, and it's becoming very annoying.
Is my touchscreen digitizer failing, or is it possible there's some sensitivity adjustment I can make? Is it possible it's related to static or something and I can use a cleaning solution or something to correct it?
I really want to avoid paying a lot to fix this issue. I've already seen places where I can buy a replacement digitizer if that is needed, but it's not cheap. I'm really hoping this phone will hold out a lot longer than it is right now as it's been an otherwise good phone.
You may want to try recalibrating your screen.
Go to Settings > Language & keyboard > Touch Input > Text input > Calibration tool.
klabit87 said:
You may want to try recalibrating your screen.
Go to Settings > Language & keyboard > Touch Input > Text input > Calibration tool.
Click to expand...
Click to collapse
i think this only calibrates the keyboard. there is an .apk around somewhere that will calibrate the touch screen, some roms have it built into the settings.
andybones said:
i think this only calibrates the keyboard. there is an .apk around somewhere that will calibrate the touch screen, some roms have it built into the settings.
Click to expand...
Click to collapse
oh ok. gotcha. Makes sense
I'll see what I can find.
nimdae said:
I'll see what I can find.
Click to expand...
Click to collapse
If not just unroot and send it to vzw
Sent from my Incredible 2 using xda premium
Well, I'm not having much hope with calibration apps. This looks like a very device specific thing, which is understandable. Besides, it doesn't really feel like a calibration issue. When it's not going haywire, touch accuracy seems fine.
I'm not really keen on going for a replacement. Besides, my physical modifications (antenna improvement, improved access to power button, etc) may prevent that
If I can't find a cheap/free solution, I'll just jump on replacing the digitizer. This is not a task that bothers me, was just hoping someone came across this issue and found a better solution.
Harbor Freight has the hot air blower for $12.00.
This may be a dumb question but i didn't see you mention it. Did you try a factory reset? Perhaps you have an app or something conflicting with screen response somewhere in there.
Sent from my Incredible 2 using Tapatalk
I seem to have dead spots once in a while on my touchscreen. Doesnt really effect day to day usage but can be annoying when trying to click something. Like a link on a webpage, sometimes I will have to scroll up or down to move the link before Im able to click it.. spot seems to be centrally located but has happened in a few places.
MJL99 said:
This may be a dumb question but i didn't see you mention it. Did you try a factory reset? Perhaps you have an app or something conflicting with screen response somewhere in there.
Sent from my Incredible 2 using Tapatalk
Click to expand...
Click to collapse
Not a dumb question at all. I did not mention it, and it's completely valid. However, I have gone through a couple of full resets since the issue started, and the behavior has persisted.
In fact, I have tried a couple of different firmwares in the time it has started. I had thought maybe a build of CM7 might have caused it, but the ICS builds have the same behavior, as well as a couple other firmwares that I don't remember the name of offhand.
cac2us said:
Harbor Freight has the hot air blower for $12.00.
Click to expand...
Click to collapse
Can you elaborate?
mastamoon said:
I seem to have dead spots once in a while on my touchscreen. Doesnt really effect day to day usage but can be annoying when trying to click something. Like a link on a webpage, sometimes I will have to scroll up or down to move the link before Im able to click it.. spot seems to be centrally located but has happened in a few places.
Click to expand...
Click to collapse
For me, it's not an issue with dead spots. For one thing, the issue is intermittent and in varying degrees of severity. Usually when it happens it's just something at the bottom activates and I can cancel it out and carry on with my session. Occasionally, though, it just goes haywire, as though a palm is resting on it or something is touching random places rapidly.
So far I've been able to kill the haywire behavior by locking the display, wiping it down a bit, unlocking the display, then continuing on. I haven't had to take any more drastic measures than that. It's still annoying in that it can happen while typing a message and I have to go back and clean up the mess it leaves, or it might monkey around with an app.
It seems as though there might be some static buildup or something because it seems worst shortly after taking it out of my pocket. If that's the case, I wonder if I can ground it out, or do something to dissipate it.
nimdae said:
Not a dumb question at all. I did not mention it, and it's completely valid. However, I have gone through a couple of full resets since the issue started, and the behavior has persisted.
In fact, I have tried a couple of different firmwares in the time it has started. I had thought maybe a build of CM7 might have caused it, but the ICS builds have the same behavior, as well as a couple other firmwares that I don't remember the name of offhand.
Click to expand...
Click to collapse
Sorry i didn't notice you mention it anywhere. Fwiw i get lockscreen issues kinda like you describe. i use the slide lock on cm7 and when i go to slide right to unlock, before it gets to the dot the lock releases without me lifting my finger. I know i don't have a dead spot because it only does it on the lockscreen and relocking and waking the screen fixes it. Only happens on cm7 and why i thought it might be an issue like that.
nimdae said:
Can you elaborate?
Click to expand...
Click to collapse
If you need to replace the screen/digitizer you will need to heat up the glue to remove the screen. Normally a heat gun is recommended
Sent from my Incredible 2 using Tapatalk
Bro I just went thru the same thing same week. And I've tried all the suggestion here, in the end it was the digitizer. I call Verizon and explain the problem and they are sending me another Dinc2. It sucks cause now you have to unroot and restore (s on) (which for me was a bit of a *****) to send the phone back , but trust me at some point the entire bottom part of your screen will not respond to touch.. You'll only be able the answer calls from the lock screen and to hang up you'll have to do so thru the pulldown bar. And the biggest problem will be you won't be able to access your key pad. Sorry bro but thoses are the facts....I'm waiting for the replacement as I type this.
MJL99 said:
If you need to replace the screen/digitizer you will need to heat up the glue to remove the screen. Normally a heat gun is recommended
Sent from my Incredible 2 using Tapatalk
Click to expand...
Click to collapse
It's not held in with a normal ribbon cable lock? It would be strange if they used a glue. I've been inside many of these devices in the past going back some 10 years (including at a repair center) and didn't face glued ribbon cables (either solder or ribbon cable lock).
nimdae said:
It's not held in with a normal ribbon cable lock? It would be strange if they used a glue. I've been inside many of these devices in the past going back some 10 years (including at a repair center) and didn't face glued ribbon cables (either solder or ribbon cable lock).
Click to expand...
Click to collapse
They are held in with a ribbon cable lock but the screen and digitizer are glued onto the phone itself, like the metal part that holds all the parts
So I wasn't able to find a software solution. Not sure what's causing it, but it's causing some unwanted issues (hang up call and it immediately calls someone else based on a false touch). I ordered the parts I need and will report if this fixes my problems.
nimdae said:
So I wasn't able to find a software solution. Not sure what's causing it, but it's causing some unwanted issues (hang up call and it immediately calls someone else based on a false touch). I ordered the parts I need and will report if this fixes my problems.
Click to expand...
Click to collapse
Where did you order from, how much did you pay?
Be sure to watch both of those vids on utube.
I live where the relative humidity is around 15% most of the time.
Still I notice that when I pull my phone out of my pocket, it has moisture all over the back where it was pressing against my leg.
I found putting it in a soft cover pouch keeps most of that under control.
Just for the heck of it , try putting the phone in a jar of un cooked rice for a few hrs.
Battery and cards removed, jar sealed tight.
If you have another phone to transfer your calls to that would be better.
If you are like me and your skin oil transfers to your phone allot, use a fine tooth brush around the area where the screen meets the housing.
Avoid pushing any debris further into the unit. Use brisk outward strokes.
If none of that produces any favorable results, look for a hot air gun or a blow dryer.
Keep us updated...
cac2us said:
Where did you order from, how much did you pay?
Be sure to watch both of those vids on utube.
I live where the relative humidity is around 15% most of the time.
Still I notice that when I pull my phone out of my pocket, it has moisture all over the back where it was pressing against my leg.
I found putting it in a soft cover pouch keeps most of that under control.
Just for the heck of it , try putting the phone in a jar of un cooked rice for a few hrs.
Battery and cards removed, jar sealed tight.
If you have another phone to transfer your calls to that would be better.
If you are like me and your skin oil transfers to your phone allot, use a fine tooth brush around the area where the screen meets the housing.
Avoid pushing any debris further into the unit. Use brisk outward strokes.
If none of that produces any favorable results, look for a hot air gun or a blow dryer.
Keep us updated...
Click to expand...
Click to collapse
I've worked in microelectronics in the past and know quite a bit about moisture control, static control, etc. I had to help manage a sizable clean room at one point.
Unfortunately it's possible that my digitizer is just flawed and the flaws are just now coming out. I don't think it's moisture, but rather most likely electrostatic. I live in a rather dry place.
I normally would not use a screen protector, but I might consider it now as it might add an extra layer of insulation from static in my pocket.
The digitizer I found was from a seller on Amazon. For all of the parts needed (I don't have the tools for properly working on this device), including the small double sided tape, I spent around $32.
The double sided tape comes in a big roll so if anyone else needs to do this kind of repair, I will ship the remaining tape for the cost of shipping (this should save you about $5).
Hi all. In need of a bit of advice here. Hope this is in the right forum.
My beloved DHD has suffered from one too many falls. Despite being protected in an Otterbox Commuter case, he now lies on his deathbed. Even though I was considering an upgrade, I'm thinking I might want to stretch out his life for as long as possible instead. So I've come here to ask for repair advice.
- The phone seems structurally sound from the outside, no damage besides minor aesthetic scratches from before the phone was protected by the Otterbox.
- It appears to boot. Makes the vibration noise etc. Heck the alarm even went off the other morning, at the set time of 0630.
- Screen does not function at all. Lifeless. But not broken in any way externally. Because of this, had to pull the battery to shut the alarm off.
- When plugged in to charge, charging light indicator does not illuminate.
Any ideas?
Sent from my nipple running windows 95 NT.
Cheers, although I'm gonna try a different approach for now.
Any ideas? Can anyone point me in the right direction of some advice?
Sounds like 2 things. Broken lcd and a broken charging port. It wouldn't be worth repairing. You could buy one second hand on ebay for aboot £120.
Sent from my nipple running windows 95 NT.
Thanks for that. Considering trying to sell it broken, for parts. Only thing that concerns me is any sensitive data that may be readily accessed by someone who knows how to get to it.
Is there a way to wipe it?
You could use another dhd with the same firmware and copy the key/button presses and reset it in bootloader mode.
Sent from my laser emitting mammary glands.
Could also be that the connector for the screen has been dislodged due to being drop to many times you mite try opening it up and see if it is that.
lincolnep said:
Could also be that the connector for the screen has been dislodged due to being drop to many times you mite try opening it up and see if it is that.
Click to expand...
Click to collapse
Hi, thanks for the response. So I assume you're referring to this part here?
http://www.parts4repair.com/htc-desire-hd-lcd-screen-fpc-connector/
Seen in this disassembly video from the 3:05 minute mark?
http://www.youtube.com/watch?v=JfatoeWbMRk
bump...
I have a problem similar to yours. But in my case, I'd turned the phone off to go to the cinema and the LCD and touch never turned on again.
In order to erase your data, did you try overwriting a stock rom? (In case it's just the charging LED that is broken)
That sucks! Self detonating phone. Does yours still vibrate and 'turn on'?
Haven't actually managed to clear the data. I'm ordering this part here (http://www.parts4repair.com/htc-desire-hd-lcd-screen-fpc-connector/) and I'm going to attempt to pull it apart and fix it.
If I can get it to work again I'll sell the One V I'm using and go back to the old faithful!
Well this saves me from starting a new thread haha
Anyway i am having the exact same problem as you have.
My dad brought home a Desire HD from work wich was not working so i am trying to fix it.
The phone boots, it vibrates ones and after a minute it makes the boot sound.
But nothing responses and the lights wont turn on.
Also no charging light..
Also it does not charge but usb does connect.
Could this be the FPC connector or the screen?
Hmmm...interesting, exact same issue as mine.
Well, I've ordered the FPC connector replacement part I linked above...going to attempt to play around with it when it arrives and see if I can breathe new life into the phone. So I can tell you how that goes...
Although:
1. Would the charging light and screen problem be connected? Is this feasible? Or does it suggest something else is likely shot?
2. I believe the FPC connector requires a solder to replace. This could be a bit ambitious on my part to attempt to repair...any ideas on what sort of a solder would be suitable?
Sent from my HTC One V using xda premium
suitup said:
Hmmm...interesting, exact same issue as mine.
Well, I've ordered the FPC connector replacement part I linked above...going to attempt to play around with it when it arrives and see if I can breathe new life into the phone. So I can tell you how that goes...
Although:
1. Would the charging light and screen problem be connected? Is this feasible? Or does it suggest something else is likely shot?
2. I believe the FPC connector requires a solder to replace. This could be a bit ambitious on my part to attempt to repair...any ideas on what sort of a solder would be suitable?
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
no clean flux core solder would work best, preferably something very thin (about .015"). A small bottle of noclean flux would also help and you probably will need lead free solder as that is likely what they used on the board to begin with, and lead and leadfree dont typically mix as well.
Thanks for the quick reply...
Something like this?
http://www.oritech.com.au/productDetail.aspx?productID=23244
What sort of iron would be suited? Would any of these suit?
http://www.oritech.com.au/categories.aspx?categoryID=321
Would you say it'd be a difficult process? I've soldered before, but a that was a while ago in high school...
Also the cost of all this equipment will far outweigh the cost of the $3 FPC connector spare!
suitup said:
Thanks for the quick reply...
Something like this?
http://www.oritech.com.au/productDetail.aspx?productID=23244
What sort of iron would be suited? Would any of these suit?
http://www.oritech.com.au/categories.aspx?categoryID=321
Would you say it'd be a difficult process? I've soldered before, but a that was a while ago in high school...
Also the cost of all this equipment will far outweigh the cost of the $3 FPC connector spare!
Click to expand...
Click to collapse
yes, those should both work fine. ya it is costly for equipment. i have a edsyn iron i use at home and solder i get from work. i would say it can be tricky, i havent seen the connector but im sure its similar to other inline ribbon connectors. remember, short burst soldering, heating it for too long will take the pad off the pcb, and repairing THAT can become very difficult.
suitup said:
Hmmm...interesting, exact same issue as mine.
Well, I've ordered the FPC connector replacement part I linked above...going to attempt to play around with it when it arrives and see if I can breathe new life into the phone. So I can tell you how that goes...
Although:
1. Would the charging light and screen problem be connected? Is this feasible? Or does it suggest something else is likely shot?
2. I believe the FPC connector requires a solder to replace. This could be a bit ambitious on my part to attempt to repair...any ideas on what sort of a solder would be suitable?
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
Thanks. We have a spare DHD with broken glass here wich my sister is using unter her SGS is back from repair. Will swap the motherboard when her phone is back.
Sent from my HTC Vision using xda premium
Hi, I have a little concern about the galaxy nexus randomly shutting off, when the phone bumps a little it just shuts off, so minor drops just shuts off the phone anyone having this issue? and is this hardware or software issue?
Thanks in advance
I haven't had the issue. Have you taken the back of to see if the battery is seating properly?
It sounds hardware related.
Sent from my Galaxy Nexus using xda app-developers app
I have the same problem. I initially had trouble turning on my phone. Then noticed the problem with battery isn't seated well or making contact well. I had to press the battery down using my fingers in order to turn it on. And once in a while I'll randomly shut off. I just got the phone two days ago. Will be sending it back to Google for replacement.
Sent from my Galaxy Nexus using xda app-developers app
Had the same issue, did some digging around the net and found a thread on Android Central that covered this issue and found the problem. Take a look at this video:
I only watched the first few minutes until I replicated the issue a few times, and then found a simple fix: took a clean cloth and wiped the battery pins on the phone and the same on the battery itself. Tried the same tapping test, no problems whatsoever.
If you guys aren't as lucky, I'd definitely try to get it warrantied out.
Thanks
radioarizona said:
Had the same issue, did some digging around the net and found a thread on Android Central that covered this issue and found the problem. Take a look at this video:
I only watched the first few minutes until I replicated the issue a few times, and then found a simple fix: took a clean cloth and wiped the battery pins on the phone and the same on the battery itself. Tried the same tapping test, no problems whatsoever.
If you guys aren't as lucky, I'd definitely try to get it warrantied out.
Click to expand...
Click to collapse
Thank you, I tried this and it works. After cleaning the pins using a cloth and a pin I no longer have the problem :good:
I tried folding some paper against my battery to press it against the contacts more but this did not work for me at all. What worked for me was spraying the insides of the contacts with some deoxidation spray. This completely fixed my problem. Even though the contacts are gold, it seems like they are not simple leaf springs but rather contain some other spring mechanism? I believe this is what corroded and was causing my problems. It's lame that Samsung didn't put enough power buffering capacitors into the phone's power supply to handle momentary power disconnects. My experience with samsung products is that even though no corners were cut in their construction, there are numerous little design mistakes and poor sourcing of parts.
Hi everyone.
After a sudden heavy rain, I got some water in my Gnex. I tried the old bag of rice trick, only to find out the USB port was not functioning any more, neither for PC connectivity, nor for charging.
Following the advice of a person I no longer consider my friend, I tried spraying some Isoprpyl Alcohol in the USB port. It did get it to work correctly, but it damaged the digitizer, meaning I get random touches on the lower part of the screen (where the Back, Home and Recent apps buttons are).
I took the phone to a service centre where they tried to clean it, but the issue remains. I'll go there today with my wife's phone to see if it's indeed a touchscreen issue or a motherboard issue. I'm not sure if I want to invest in a new screen (over $100 + maybe a new back cover since the current one has quite a few scratches and cracks) and I'm thinking of maybe upgrading to a Nexus 5 or Xperia Z (the latter being waterproof).
The question now would be, could I do something with the hardware? Like, root it, connect it to my wifi and use it as a web server, or connect it to my TV through an MHL adapter and get a "smart TV". Can I get it to ignore touches on the screen completely, and only accept an OTG/bluetooth mouse input?
Any idea is welcome
vladk2k said:
Hi everyone.
After a sudden heavy rain, I got some water in my Gnex. I tried the old bag of rice trick, only to find out the USB port was not functioning any more, neither for PC connectivity, nor for charging.
Following the advice of a person I no longer consider my friend, I tried spraying some Isoprpyl Alcohol in the USB port. It did get it to work correctly, but it damaged the digitizer, meaning I get random touches on the lower part of the screen (where the Back, Home and Recent apps buttons are).
I took the phone to a service centre where they tried to clean it, but the issue remains. I'll go there today with my wife's phone to see if it's indeed a touchscreen issue or a motherboard issue. I'm not sure if I want to invest in a new screen (over $100 + maybe a new back cover since the current one has quite a few scratches and cracks) and I'm thinking of maybe upgrading to a Nexus 5 or Xperia Z (the latter being waterproof).
The question now would be, could I do something with the hardware? Like, root it, connect it to my wifi and use it as a web server, or connect it to my TV through an MHL adapter and get a "smart TV". Can I get it to ignore touches on the screen completely, and only accept an OTG/bluetooth mouse input?
Any idea is welcome
Click to expand...
Click to collapse
One day I got caught in a storm having my Gnex in my pocket. Vacuum and rice tricks didn't work completely, as the phone was working properly besides recognizing the sim card (Mboard issue). What I did was buy a broken screen nexus off of Ebay, and exchanged the screens.
Now I have a fully working mobile phone, plus an MHL connected - XBMC enabled smart TV box, connected with bluetooth mouse/keyboard.
Question: Why would you need to ignore touches on the screen?
As I said, after spraying the USB port with isopropyl alcohol, it appears to have touches all over the bottom part of the screen, as if someone was constantly keeping 3-4 finger and touching away at the soft buttons. Cleaning the phone in a service centre did not help.
vladk2k said:
As I said, after spraying the USB port with isopropyl alcohol, it appears to have touches all over the bottom part of the screen, as if someone was constantly keeping 3-4 finger and touching away at the soft buttons. Cleaning the phone in a service centre did not help.
Click to expand...
Click to collapse
Sorry, I missed that info. Try searching for 'touch blocker' in Google Play. Don't know if that would work on a Gnex though.
Another (hardcore) idea would be to disconnect the screen altogether.
Hi
Sorry for my english, I'm hungarian, this is the best I can do.
So I bought a cheap (but not too cheap) SM-P905, but I can't get the screen to work properly.
The touch layer, the spen, the backlight works well, I managed to mirror the screen on my pc and everything else seems to be okay.
I got off the back cover, I tried to unplug and reattach every flex cable, even the battery. I tried to look everything under magnifying glass to see what could be the problem.
The lcd flex connector looks like this under my lens.
(Upload it in the next post, not working from the android app)
I tried to clean it with a needle, but it still looks like it is corroded or melted.
Is it possible that replacing this connector will get the screen back to normal? (I found flex connector replacement on the internet)
Or is it possible to repair it with some jumpers or something like this?
Is it melted because of some shorted circuit somewhere else, or because of a bad micro capacitor?
How and where can I locate and resolve this problem (s)? Maybe is it still the lcd that is simply dead and I can't bring it back to life?
I dont want to buy a screen, and a motherboard (neither only one of them )
Thank you for your help!
Okay the forum doesnt let me to insert links or photos, because I'm new here -.-
/s/53oab9sykbihn32/20151021_175009.jpg?dl=0 write dropbox dot com in front of link
https://www.dropbox.com/s/53oab9sykbihn32/20151021_175009.jpg?dl=0
In my opinion it died!!
I hoped for better opinions
I wanted to know how this thing can die?
It has to be caused by something.
Bad resistor/capacitor? Is it on the motherboard or on the lcd's circuitboard?? Or is it only the corroded flex connector??
I dont want to throw the whole tablet in the trash. Everything else is just operating fine.
If nobody can answer this, where should I write, where people can help with these very small components / resoldering / measuring what gone wrong here?
Alan-B said:
In my opinion it died!!
Click to expand...
Click to collapse
So today I measured the pins in worst condition. There are 2 pins that I tought can cause the problem and looks corroded. (Number 5 and 9 from the right) Both of them !are not used!. (There is a total of 3 pins that are not used on the connector/cable)
They are not lead through the flex cable, they have no function here.
So the problem comes from somewhere else, but I still don't know why they look like this.
Maybe I will try to seperate the screen from the body and look at it closer and its connectors/smaller circuit boards.
Sent from my SM-N9005 using XDA Free mobile app
Hmm, that pic does not make me think its a corrosion problem. At best, it can lead to a finicky connection, but there seems to be enough there for proper electrical contact. If this were a headphone jack, for example, I would say apply pressure near the cable to see if the headset works properly, and if it does, then I know its a cable problem. No idea if you can try to apply pressure to the cable and see if the LCD turns on.
If the screen mirrors on the TV successfully, then there are a bunch of Samsung Service Codes you can use to test the LCD. Unfortunately I do not know them for this model, but google should get you the service menu very easily. There is definitely a test in there for the LCD that should give you a better idea what to expect.
If the cable is pretty cheap, I would also just pick up one and try replacing. Nothing to lose! AND if you have access to another identical device, you can try to stick this LCD on that device to see if its the LCD thats the problem or the motherboard.
Lastly, I would want to know if the glass on that LCD has ever been replaced. If they did a glass only replacement, its possible they overheated the LCD ... OR used too much LOCA glue that shorted the connectors.
Many possibilities, so I wouldn't call it a day yet. First, look for the service menu, thats the best place to begin.
I will try the service codes.
Unfortunately I don't have more devices. The easiest way would be to test the identical parts on a working one, but I don't know anyone who would risk his/her tablet for this
The other thing I can do is to get another lcd-glass unit from ebay or from ifixit and try it. If the problem was the lcd, it should work, I'm happy, but if its black, I will have (maybe) 2 working lcd units for sale. Or I have to get a new motherboard (sounds expansive).
I don't think that they replaced the glass on this device, it looks very used and scratchy, so it was working before.
Thank you for taking your time for me and answering my dumb questions!!
Sent from my SM-N9005 using XDA Free mobile app
There are more good news than bad, so I'm very happy.
So 1-2 days ago I started to get off the screen to see if I can seperate the LCD from the receiver. Turned out its not that hard. The only hard thing is to get it off the body in one piece. Lots of heating with a hair drier, and a LOT OF PATIENCE. If you can get it off in one piece you are on your way.
Seperating the glass from the LCD is very easy, did it in 10 minutes, I don't think it needs heating...
So I did it, then I saw some water damage (white things) on the back side of the LCD. There is a small board here too, so I cleaned the white thing off with some alcohol.
Then I put the lcd back and voilá, Its WORKING!!!
The only problem is that I damaged the touch screen glass, so I need to order a new one, but its under 20$ so no problem.
Thank you all for your help, I hope that I finished here
Sent from my SM-N9005 using XDA Free mobile app
Good to know! Thank you for the update
Other solution is remove battery five minute and reconnect battery