Related
I need help im stuck with my OP3 with OOS 4.
I want to remove any annoying screens while booting so i need to lock the bootloader (done)
and i need this dm-verity screen away and i need help with this
can somebody give me a tutorial to do it?
Greetings,
Unlock bootloader.
Use ADB side load to flash stock rom.
Lock back bootloader. Voila!
Hope it helps. Thanks!
i tired
I tired but after the OTA update i get the dm message again
K3v1990 said:
I need help im stuck with my OP3 with OOS 4.
I want to remove any annoying screens while booting so i need to lock the bootloader (done)
and i need this dm-verity screen away and i need help with this
can somebody give me a tutorial to do it?
Greetings,
Click to expand...
Click to collapse
this
cpt.macp said:
this
Click to expand...
Click to collapse
I will try Tomorrow
cpt.macp said:
this
Click to expand...
Click to collapse
When i do this a have to unlock the bootloader so i have 1 message again ...
K3v1990 said:
When i do this a have to unlock the bootloader so i have 1 message again ...
Click to expand...
Click to collapse
I had to solve same problem the other day. I unlocked, flashed stock recovery from 3.2.8 then adb sideload 3.2.8, locked bootloader, reboot and let it update to Nougat, between all steps full resets.
Sent from my ONEPLUS A3000 using Tapatalk
millicent said:
I had to solve same problem the other day. I unlocked, flashed stock recovery from 3.2.8 then adb sideload 3.2.8, locked bootloader, reboot and let it update to Nougat, between all steps full resets.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
ill go try that, thanks
millicent said:
I had to solve same problem the other day. I unlocked, flashed stock recovery from 3.2.8 then adb sideload 3.2.8, locked bootloader, reboot and let it update to Nougat, between all steps full resets.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
for full restet u mean Factory restet in the settings?
Edit: found it
Here are the Proper Instructions to Install Oxygen OS 4.0 without DM - Verity Error and F2FS -
For Unlocked Bootloader + TWRP + Rooted users (Having any Rom installed before) -
Requisites -
Backup All your internal Storage Data - Sync all Google Stuff - backup all Messages or stuff.
Downloads -
Oxygen OS Official OTA Full Zip - http://otafsc.h2os.com/patch/amazon...en_16_OTA_035_all_1612310359_e10cadfb2af7.zip
Official Recovery ( Oxygen OS ) - https://www.androidfilehost.com/?fid=24591000424943319
TWRP Recovery 3.0.2 - 23 (IMPORTANT) - https://www.androidfilehost.com/?fid=529152257862684308
SuperSU 2.79 Stable - http://downloadmirror.co/Utz/UPDATE-...1211114519.zip
Custom Rom Based on OOS ( Choose any) - Freedom OS - https://forum.xda-developers.com/one...s-1-0-t3409348
Experience Rom - https://forum.xda-developers.com/one...-v1-0-t3522259
Hyper Stock - https://forum.xda-developers.com/one...stock-t3521946
Procedure -
1.) As mentioned, BACKUP EVERYTHING.
2.) Flash stock oxygen recovery though fastboot or in twrp.
3.) Boot to stock recovery, sideload Official 4.0 ota via adb.
4.) Reboot and dont set up device ( not necessary ) enable developer settings and usb debugging.
5.) Flash TWRP .23 NOT .28 (.28 is bugged with decryption and f2fs errors)
6.) Boot to twrp, wipe /data to f2fs and /system and /cache to ext4.
7.) As wiping everything, copy any custom oxygen os build and supesu 2.79
8.) Flash any custom oxygen os build ( all these 3 builds flashes supersu itself, so no need to flash supersu, buy keep it for further later use.)
9.) Reboot, Setup and copy all ur stuff.
This method will surely get u a Rooted, decrypted, f2fs /data partition Oxygen Os 4.0.
For Stock/Twrp Recovery, Encrypted/Decrytped, Locked/Unlocked Bootloader, Unrooted Users (Those who dont want to root or decyrpt) -
1.) Backup is necessary as internal storage will be wiped, its a one time process as for now every Oneplus update will be f2fs /data compatible.
2.) ADB sideload 4.0 ota.
3.) Reboot and dont set up device ( not necessary )
4.) Go to backup and reset in settings, do a factory reset with internal storage ( This will wipe everything, BACKUP NEEDED )
5.) Let the process complete and check /data partition via DiskInfo app.
6.) If it isnt, do a factory reset again via stock recovery.
7.) If nothing helps, follow first method.
I cant guarantee this will work, but many users have reported this as working.
I think this will be sufficient
Edit : New recovery by eng.stk - https://forum.xda-developers.com/devdb/project/dl/?id=22429&task=get
supports f2fs decryption.
millicent said:
I had to solve same problem the other day. I unlocked, flashed stock recovery from 3.2.8 then adb sideload 3.2.8, locked bootloader, reboot and let it update to Nougat, between all steps full resets.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
It worked thank you very much
When dm-varity warning is there, i flash openbeta 7 firmware &modem . Problem solved! Never see this warning. Phone works fine.when i flash openbeta 8 firmware &modem,i wil get back the dam-varity warning
LELBOT said:
Here are the Proper Instructions to Install Oxygen OS 4.0 without DM - Verity Error and F2FS -
For Unlocked Bootloader + TWRP + Rooted users (Having any Rom installed before) -
Requisites -
Backup All your internal Storage Data - Sync all Google Stuff - backup all Messages or stuff.
Downloads -
Oxygen OS Official OTA Full Zip - https://docs.google.com/uc?id=0BzS3n...xport=download
Official Recovery ( Oxygen OS ) - http://oneplusroms.s3.amazonaws.com/...BmI3Z1Dri5Q=
TWRP Recovery 3.0.2 - 23 (IMPORTANT) - https://www.androidfilehost.com/?fid=529152257862684308
SuperSU 2.79 Stable - http://downloadmirror.co/Utz/UPDATE-...1211114519.zip
Custom Rom Based on OOS ( Choose any) - Freedom OS - https://forum.xda-developers.com/one...s-1-0-t3409348
Experience Rom - https://forum.xda-developers.com/one...-v1-0-t3522259
Hyper Stock - https://forum.xda-developers.com/one...stock-t3521946
Procedure -
1.) As mentioned, BACKUP EVERYTHING.
2.) Flash stock oxygen recovery though fastboot or in twrp.
3.) Boot to stock recovery, sideload Official 4.0 ota via adb.
4.) Reboot and dont set up device ( not necessary ) enable developer settings and usb debugging.
5.) Flash TWRP .23 NOT .28 (.28 is bugged with decryption and f2fs errors)
6.) Boot to twrp, wipe /data to f2fs and /system and /cache to ext4.
7.) As wiping everything, copy any custom oxygen os build and supesu 2.79
8.) Flash any custom oxygen os build ( all these 3 builds flashes supersu itself, so no need to flash supersu, buy keep it for further later use.)
9.) Reboot, Setup and copy all ur stuff.
This method will surely get u a Rooted, decrypted, f2fs /data partition Oxygen Os 4.0.
For Stock/Twrp Recovery, Encrypted/Decrytped, Locked/Unlocked Bootloader, Unrooted Users (Those who dont want to root or decyrpt) -
1.) Backup is necessary as internal storage will be wiped, its a one time process as for now every Oneplus update will be f2fs /data compatible.
2.) ADB sideload 4.0 ota.
3.) Reboot and dont set up device ( not necessary )
4.) Go to backup and reset in settings, do a factory reset with internal storage ( This will wipe everything, BACKUP NEEDED )
5.) Let the process complete and check /data partition via DiskInfo app.
6.) If it isnt, do a factory reset again via stock recovery.
7.) If nothing helps, follow first method.
I cant guarantee this will work, but many users have reported this as working.
I think this will be sufficient
Edit : New recovery by eng.stk - https://forum.xda-developers.com/devdb/project/dl/?id=22429&task=get
supports f2fs decryption.
Click to expand...
Click to collapse
Will this method continue working if I install a custom rom after? Also, what do u mean by the new recovery supports f2fs decryption? Does it mean that your method doesn't or that we don't have to do these steps?
m_reyna_16 said:
Will this method continue working if I install a custom rom after? Also, what do u mean by the new recovery supports f2fs decryption? Does it mean that your method doesn't or that we don't have to do these steps?
Click to expand...
Click to collapse
Yes, it will work.
For the new recovery, it supports f2fs decryption and u have flash it to follow the steps.
These methods will work.
Dm-verity
Hi, sorry is there any side effect if I don't correct the dm-Verity issue?
For now phone seems to work good.
Thanks in advance!
Luca
cryptofer said:
Hi, sorry is there any side effect if I don't correct the dm-Verity issue?
For now phone seems to work good.
Thanks in advance!
Luca
Click to expand...
Click to collapse
The only pb I had was safetynet tests not passing. that surely disables Android pay.
Sent from my ONEPLUS A3000 using Tapatalk
K3v1990 said:
I need help im stuck with my OP3 with OOS 4.
I want to remove any annoying screens while booting so i need to lock the bootloader (done)
and i need this dm-verity screen away and i need help with this
can somebody give me a tutorial to do it?
Greetings,
Click to expand...
Click to collapse
Hi,
to be synthetic:
From TWRP recovery, change filesystem to Ext4 for both Data and Cache, then full wipe everything (System too);
Go back to OxygenOS v3.2.8;
Be sure to replace TWRP with Stock Recovery (download from 3.2.8 official thread);
Lock bootloader (both from Developer Options and Fastboot);
Sideload via recovery OxygenOS v4.0;
Consider to factory reset for a clean installation.
For more clarifications, I'm at your disposal
https://www.androidfilehost.com/?fid=457095661767116249
flash it
Test by me
millicent said:
The only pb I had was safetynet tests not passing. that surely disables Android pay.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
O yes this is true but I think android pay doesn't work at all on rooted devices, even without dm-Verity issue, is it true?
Thanks a lot!
cryptofer said:
O yes this is true but I think android pay doesn't work at all on rooted devices, even without dm-Verity issue, is it true?
Thanks a lot!
Click to expand...
Click to collapse
I haven't tried it yet but I read a few reports already about systemless root with magisk being able to preserve Android pay
Sent from my ONEPLUS A3000 using Tapatalk
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This recovery was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
Instructions
Install zip using an existing custom recovery
Work
Everything works as in the original version + otg and mtp.
Links
2. 20180708: 3.2.2-0 version:
from recovery: https://drive.google.com/file/d/1v5KlNFjaQqpyml7TotbleIvsGhITyYFk/view?usp=sharing
from odin: https://drive.google.com/file/d/1RMqFJ7uXVwttxu5dmYarQLcAi56g2seh/view?usp=sharing
1. 20171006: 3.1.1-0: https://drive.google.com/file/d/0B-6nm7Jks0W5MHlwTUxlUDFiOWc/view?usp=sharing
Sources
TWRP: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Device: twrp branch: https://github.com/Valera1978/android_device_samsung_viennalte
i m on official twrp and i m not able to install magisk (image cant get compressed to size of 10mb boot, always 10.4)
will this inofficial twrp build help to get magisk installed
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This frecovery was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
Instructions
Install zip using an existing custom recovery
Work
Everything works as in the original version + otg and mtp.
Links
1. 20171006: 3.1.1-0: https://drive.google.com/file/d/0B-6nm7Jks0W5MHlwTUxlUDFiOWc/view?usp=sharing
Sources
TWRP: https://github.com/omnirom/android_bootable_recovery
Kernel: https://github.com/Valera1978/android_kernel_samsung_lt03lte
Click to expand...
Click to collapse
For some reason this recovery causes facebook and facebook messenger apps to continuously crash over and over, other than that so far everything is great!
@Valera1978
Amazing! Thanks for sharing with us!
@Valera1978
Sooooooo cool! :good:
....and.....while not using F*ckbook, I don't care about crashing messengers and so on. :evel:
I installed this recovery and everything is ok except when trying to restore modem
I backed up my system to install official firmware to test some stuff
Then i reinstalled the recovery and tried to restore my backup but it was failing when restoring the modem
I deselected the modem and restored everything else and all ok
Same here. Failing restoring the modem.
The latest official Version doesn't work either (crash):
twrp-3.2.1-0-viennaltexx
The latest working version for my p905 is:
twrp-3.0.2-0-viennaltexx
https://twrp.me/samsung/samsunggalaxynotepro122qcom.html
i flashed twrp recovery sucessfully thru odin..but when i tried to boot to recovery it's still stock firmware recovery not twrp recovery please help
The bootloader is unlooked?
Could you start into the bootloader?
If yes, you can flash the recovery via fastboot
after five times I have managed
My big problem now is how do I activate HDMi?
have a MHL cable micro usb to HDMi when I plug it in nothing happens
Thanks a lot for this TWRP 3.2.2-0 it works nice with SM-P905, and Valera1978 Android 9 Pie ROM.
Easy install, Valera1978 TWRP 3.2.2-0 img from Official TWRP 3.0.2-0 viennalte.
Format f2fs, And latest magisk
risant said:
i flashed twrp recovery sucessfully thru odin..but when i tried to boot to recovery it's still stock firmware recovery not twrp recovery please help
Click to expand...
Click to collapse
Successfully TWRP flash thru Odin, observe the progress in Odin left bottom corner and prepare for this; "directly" when flash finished "force recovery start" (volume up home and startbutton until recovery starts)
Not fast enough" stock recovery autorestore ! Doitagain.
About bootloader (4.4.2 KK)
Hi,
I've just got a SM-P905 on 4.4.2 kitkat (stock). I'd like to flash one of your ROM (probably the LOS 17.1) and this recovery first.
Should I just flash it through Odin or do I need to unlock the bootloader? In that case, could you please drive me to a tutorial? I've searched a lot on this forum on howto unlock the SM-P905 bootloader (or just if it comes -the 4.4.2 version at least- with an unlocked one already) but I haven't found anything on it.
Thanks in advance
SYS2048 said:
Hi,
Should I just flash it through Odin or do I need to unlock the bootloader?
Click to expand...
Click to collapse
Flash TWRP only, through Odin.
Then flash ROM, GApps, and optional Magisk, through TWRP.
Magisk needed for root-apps, or to hide root.
(flash bootloader and modem not needed, only sometime later, if your modem are to old, and SIM not working)
KjellO said:
Flash TWRP only, through Odin.
Then flash ROM, GApps, and optional Magisk, through TWRP.
Magisk needed for root-apps, or to hide root.
(flash bootloader and modem not needed, only sometime later, if your modem are to old, and SIM not working)
Click to expand...
Click to collapse
Done a couple of days after my post. Forgot to report. Then flashed LOS 17, gapps (pico) and Magisk. Everything's ok.
Thanks for your answer.
Anyway, now it can be said that the P905 with stock 4.4.2 KK has the bootloader unlocked.
Hi, I've downloaded twrp-3.2.2.0-viennaltexx.img.tar and flashed by Odin, but twrp doesn't installed. In Developer settings I have not OEM unlock option.
what can I do?
uzzi78 said:
Hi, I've downloaded twrp-3.2.2.0-viennaltexx.img.tar and flashed by Odin, but twrp doesn't installed. In Developer settings I have not OEM unlock option.
what can I do?
Click to expand...
Click to collapse
What is your actual stock firmware on it?
You can try latest official .tar and then work your way up to this.
bmwdroid said:
What is your actual stock firmware on it?
You can try latest official .tar and then work your way up to this.
Click to expand...
Click to collapse
Now I've Android 5.0.2
LRX22G.P905XXSABQB1
@uzzi78 so you have the latest bootloader installed.
That's good.
Btw afaik/remember there is no unlock option.
Try other TWRPs as a. m.
I tought of having lost my phone so I did a remote wipe through google my devices... the phone was rooted with TWRP recovery.
After the remote wipe now has no rom... at boot first shows the oem unlock warning, then TWRP starts, and that's it... since the remote wipe deleted everything including storage I can't restore a backup.
I downloaded the latest signed flashable zip from here, copied it on a USB stick, and connected it to the OP5T. Then from TWRP mounted the USB Storage, and did a rom install from it. Problem is... nothing changed. Still at boot it return in TWRP instead of booting the OS :crying:
Any idea how to solve this?
adri72 said:
I tought of having lost my phone so I did a remote wipe through google my devices... the phone was rooted with TWRP recovery.
After the remote wipe now has no rom... at boot first shows the oem unlock warning, then TWRP starts, and that's it... since the remote wipe deleted everything including storage I can't restore a backup.
I downloaded the latest signed flashable zip from here, copied it on a USB stick, and connected it to the OP5T. Then from TWRP mounted the USB Storage, and did a rom install from it. Problem is... nothing changed. Still at boot it return in TWRP instead of booting the OS :crying:
Any idea how to solve this?
Click to expand...
Click to collapse
Download latest oos and sideload it via twrp /adb...
Sent from my ONEPLUS A5010 using Tapatalk
ahepas said:
Download latest oos and sideload it via twrp /adb...
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Did that already -- didn't succeed.
In the end I tollowed this guide -- took a couple of hours just because I could't see the "unknown device" when connecting it in Qualcomm download mode. Turns out for some reason I already had the driver installed on my pc and didn't need to install anything.
In TWRP go to wipe, then format data and type in yes. Then download, transfer and flash dm-verity zip for the oneplus 5 (it's the same for both phones). Then reboot recovery and try installing the rom again.
This unbrick tool is your best friend
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unbricking-tool-confirmation-t3733012
Just flash latest firmware zip then flash a custom rom lol. With twrp, theres always a way around a soft brick.
I had this problem too. Everytime when i installed the rom and rebooted the phone, there was a message no os installed. This did it work.
1- wipe everything. Then use format data (not wipe).
2- install the rom.
3- select reboot from receovery menu and select reboot to recovery.
4- install the rom again.
5- reboot the device normally.
Hope this will help.
Sent from my OnePlus 5T using XDA Labs
I realized the link I meant to post in my reply above didn't come across.
I did solve the problem with this guide:
https://forums.oneplus.com/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-5t.751497/
I hope that someone here can help me rescue to rescue my data.
I was on the AOSiP build from september and than decided to encrypt my device. That worked perfectly. Now I wanted to install the latest update. The internal updater didn't work (just booted into TWRP recovery without further action, so I moved the update file to microsd and than updated manually by flashing the zip file via TWRP). Prior to the whole action, I updated TWRP through the app to the latest version.
Now my phone doesn't boot anymore, it is stuck in the AOSiP boot animation. Reverting to a previous TWRP version (3.2.3.2) didn't help, also flashing the september build again didn't help.
In TWRP I was unable to decrypt data, because TWRP keeps asking me for a password (but I don't remember putting a password in the first place). Therefor I switched from TWRP to OrangeFox recovery. Here decryption worked, put still after flashing the phone doesn't boot.
Anyone that has further ideas how to fix this without loosing all my data? Any help appreciated!
Have you tried installing another kernel?
kotobodj said:
Have you tried installing another kernel?
Click to expand...
Click to collapse
No, but as my system was running before without problems I don't expect the kernel to be the problem .. Or why would that make sense?
SOLVED: I noticed that flashing the update manually didn't automatically flash Gapps right afterwards. So flashing the Gapps helped and the phone now boots normally!
Hello,
I've got a Joyeuse and I am stuck at flashing any kind of ROM. I'm on MIUI 12.0.1.0.QJZEUXM (global) and have tried the following steps:
* fastboot flash recovery TWRP
* boot into TWRP
* format all partitions
* adb push Havoc-OS-v4.6-20210619-joyeuse-Official.zip (or other ROMs like DerpFest-11-Official-Beta-miatoll-20210628-1634.zip, etc.)
* reboot system
After that the phone always and over and over again shows the title screen from Xiaomi and then reboots and does that again.
I also tried flashing fw_joyeuse_miui_JOYEUSEEEAGlobal_V12.0.1.0.RJZEUXM_7e06178ca4_11.0.zip or fw_curtana_miui_CURTANAEEAGlobal_V12.0.2.0.RJWEUXM_3c6c129fe8_11.0.zip but same happens. No difference.
Also tried with 4.14.237-Yuki-Kernel-Redmi-Note-9s-Pro-AOSP-R-2021-06-17.zip but no help.
Also flashed stock MIUI back and tried TWRP without wiping any partition.
Is there anything I have to do before flashing a custom ROM and booting to it?
After flashing the ROM did you format the data?
try another recovery, use orangefox 11 stable
if you moving from MIUI:
you should format data then reboot recovery
flash any joyeuse or miatoll rom. don't flash curtana only rom. it will hard brick your device (since you are at joyeuse forum, i guest you have joyeuse, not curtana)