I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This recovery was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
Instructions
Install zip using an existing custom recovery
Work
Everything works as in the original version + otg and mtp.
Links
2. 20180708: 3.2.2-0 version:
from recovery: https://drive.google.com/file/d/1v5KlNFjaQqpyml7TotbleIvsGhITyYFk/view?usp=sharing
from odin: https://drive.google.com/file/d/1RMqFJ7uXVwttxu5dmYarQLcAi56g2seh/view?usp=sharing
1. 20171006: 3.1.1-0: https://drive.google.com/file/d/0B-6nm7Jks0W5MHlwTUxlUDFiOWc/view?usp=sharing
Sources
TWRP: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Device: twrp branch: https://github.com/Valera1978/android_device_samsung_viennalte
i m on official twrp and i m not able to install magisk (image cant get compressed to size of 10mb boot, always 10.4)
will this inofficial twrp build help to get magisk installed
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This frecovery was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
Instructions
Install zip using an existing custom recovery
Work
Everything works as in the original version + otg and mtp.
Links
1. 20171006: 3.1.1-0: https://drive.google.com/file/d/0B-6nm7Jks0W5MHlwTUxlUDFiOWc/view?usp=sharing
Sources
TWRP: https://github.com/omnirom/android_bootable_recovery
Kernel: https://github.com/Valera1978/android_kernel_samsung_lt03lte
Click to expand...
Click to collapse
For some reason this recovery causes facebook and facebook messenger apps to continuously crash over and over, other than that so far everything is great!
@Valera1978
Amazing! Thanks for sharing with us!
@Valera1978
Sooooooo cool! :good:
....and.....while not using F*ckbook, I don't care about crashing messengers and so on. :evel:
I installed this recovery and everything is ok except when trying to restore modem
I backed up my system to install official firmware to test some stuff
Then i reinstalled the recovery and tried to restore my backup but it was failing when restoring the modem
I deselected the modem and restored everything else and all ok
Same here. Failing restoring the modem.
The latest official Version doesn't work either (crash):
twrp-3.2.1-0-viennaltexx
The latest working version for my p905 is:
twrp-3.0.2-0-viennaltexx
https://twrp.me/samsung/samsunggalaxynotepro122qcom.html
i flashed twrp recovery sucessfully thru odin..but when i tried to boot to recovery it's still stock firmware recovery not twrp recovery please help
The bootloader is unlooked?
Could you start into the bootloader?
If yes, you can flash the recovery via fastboot
after five times I have managed
My big problem now is how do I activate HDMi?
have a MHL cable micro usb to HDMi when I plug it in nothing happens
Thanks a lot for this TWRP 3.2.2-0 it works nice with SM-P905, and Valera1978 Android 9 Pie ROM.
Easy install, Valera1978 TWRP 3.2.2-0 img from Official TWRP 3.0.2-0 viennalte.
Format f2fs, And latest magisk
risant said:
i flashed twrp recovery sucessfully thru odin..but when i tried to boot to recovery it's still stock firmware recovery not twrp recovery please help
Click to expand...
Click to collapse
Successfully TWRP flash thru Odin, observe the progress in Odin left bottom corner and prepare for this; "directly" when flash finished "force recovery start" (volume up home and startbutton until recovery starts)
Not fast enough" stock recovery autorestore ! Doitagain.
About bootloader (4.4.2 KK)
Hi,
I've just got a SM-P905 on 4.4.2 kitkat (stock). I'd like to flash one of your ROM (probably the LOS 17.1) and this recovery first.
Should I just flash it through Odin or do I need to unlock the bootloader? In that case, could you please drive me to a tutorial? I've searched a lot on this forum on howto unlock the SM-P905 bootloader (or just if it comes -the 4.4.2 version at least- with an unlocked one already) but I haven't found anything on it.
Thanks in advance
SYS2048 said:
Hi,
Should I just flash it through Odin or do I need to unlock the bootloader?
Click to expand...
Click to collapse
Flash TWRP only, through Odin.
Then flash ROM, GApps, and optional Magisk, through TWRP.
Magisk needed for root-apps, or to hide root.
(flash bootloader and modem not needed, only sometime later, if your modem are to old, and SIM not working)
KjellO said:
Flash TWRP only, through Odin.
Then flash ROM, GApps, and optional Magisk, through TWRP.
Magisk needed for root-apps, or to hide root.
(flash bootloader and modem not needed, only sometime later, if your modem are to old, and SIM not working)
Click to expand...
Click to collapse
Done a couple of days after my post. Forgot to report. Then flashed LOS 17, gapps (pico) and Magisk. Everything's ok.
Thanks for your answer.
Anyway, now it can be said that the P905 with stock 4.4.2 KK has the bootloader unlocked.
Hi, I've downloaded twrp-3.2.2.0-viennaltexx.img.tar and flashed by Odin, but twrp doesn't installed. In Developer settings I have not OEM unlock option.
what can I do?
uzzi78 said:
Hi, I've downloaded twrp-3.2.2.0-viennaltexx.img.tar and flashed by Odin, but twrp doesn't installed. In Developer settings I have not OEM unlock option.
what can I do?
Click to expand...
Click to collapse
What is your actual stock firmware on it?
You can try latest official .tar and then work your way up to this.
bmwdroid said:
What is your actual stock firmware on it?
You can try latest official .tar and then work your way up to this.
Click to expand...
Click to collapse
Now I've Android 5.0.2
LRX22G.P905XXSABQB1
@uzzi78 so you have the latest bootloader installed.
That's good.
Btw afaik/remember there is no unlock option.
Try other TWRPs as a. m.
Related
Good morning,
I'm sure it's something I'm missing. I had my tablet unlocked and running fine with TWRP. I went to Omni then to Preview 2. All was well.
Last night I decided to try SuperSU 2.72. I factory reset my Pixel C by installing the latest firmware. I then used fastboot to flash TWRP. It goes into TWRP fine but now it will not boot system any longer. It goes directly into TWRP when I have it boot system. Is this an encryption problem. I've tried both TWRP versions and same behavior.
Any idea what I'm doing wrong?
Thanks!
if you have 3.0.2 i think there was a problem with early build causing this. there was a link posted for the new one that supposedly fixed it. or just use the 3.0.0 build.
Mike02z said:
Good morning,
I'm sure it's something I'm missing. I had my tablet unlocked and running fine with TWRP. I went to Omni then to Preview 2. All was well.
Last night I decided to try SuperSU 2.72. I factory reset my Pixel C by installing the latest firmware. I then used fastboot to flash TWRP. It goes into TWRP fine but now it will not boot system any longer. It goes directly into TWRP when I have it boot system. Is this an encryption problem. I've tried both TWRP versions and same behavior.
Any idea what I'm doing wrong?
Thanks!
Click to expand...
Click to collapse
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
followmsi said:
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
Click to expand...
Click to collapse
Thanks guys! I did go back to 3.0.0-0 and it now boots into system. I'll also try your repackaged version of 3.0.2-0. I'm on my work PC but I don't see a link to your version. Is my work PC just hiding it or can I find it somewhere else? Thanks again!
Mike02z said:
Thanks guys! I did go back to 3.0.0-0 and it now boots into system. I'll also try your repackaged version of 3.0.2-0. I'm on my work PC but I don't see a link to your version. Is my work PC just hiding it or can I find it somewhere else? Thanks again!
Click to expand...
Click to collapse
Here is the direct link for TWRP_dragon_3.0.2.0.img:
https://onedrive.live.com/?authkey=...&id=479EB75F5DD9DA59!131&cid=479EB75F5DD9DA59
Here is the complete folder: (TWRP flashable stock kernel)
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Cheers
Well in case of "recovery bootloop" start your device in bootloader mode and type "fastboot reboot" in command shell. That works mostly. No need to flash another recovery.
redukt said:
Well in case of "recovery bootloop" start your device in bootloader mode and type "fastboot reboot" in command shell. That works mostly. No need to flash another recovery.
Click to expand...
Click to collapse
And connect everytime with PC to do a manual reboot via fastboot .. seems a little bit too much for a simple reboot. At least for me
A proper TWRP with proper vboot will boot always correctly, like the one from xceed.
Did you ever had to do a manual reboot on his version ?
Should be fixed at the root cause .. Hope you agree ?
Cheers
I think there´s a little missunderstanding
The fastboot command helps you to get out of "recovery bootloop". After this you can reboot your device how offen you want without issues.
And yes with all existing TWRP versions I had some reboot hickups and have solved it with the fastboot method...
redukt said:
I think there´s a little missunderstanding
The fastboot command helps you to get out of "recovery bootloop". After this you can reboot your device how offen you want without issues.
And yes with all existing TWRP versions I had some reboot hickups and have solved it with the fastboot method...
Click to expand...
Click to collapse
Interesting .. I did not have any reboot issues with xceed TWRP versions .. I had to use the fix fastboot option once, but this is another topic.
But thanks for your information ...
followmsi said:
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
Click to expand...
Click to collapse
Hi.. after installing TWRP my phone nokia 3 TA-1020 I only booted to system once, when I restarted it later it does not boot the system but boots to TWRP. what can I do so that it will be rebooting to system instead of TWRP your help will be highly appreciated, thanks in advance.
Annan Denis said:
Hi.. after installing TWRP my phone nokia 3 TA-1020 I only booted to system once, when I restarted it later it does not boot the system but boots to TWRP. what can I do so that it will be rebooting to system instead of TWRP your help will be highly appreciated, thanks in advance.
Click to expand...
Click to collapse
Wrong device thread .. anyway just restore "stock" ROM/recovery to make it working again.
Good luck !
Hello, I had some trouble after a CM Update. It was only possible to boot in FastBoot, now I'm a bit further and can go to Recovery and also install ROMs.
But I'm not able to boot to the system, everytime I reboot I get into recovery, does anyone has a hint for me? What to do in this case?
Right now I have this version of twrp installed: https://forum.xda-developers.com/devdb/project/dl/?id=21835
But with the officiall one from here: https://dl.twrp.me/oneplus3/twrp-3.0.2-1-oneplus3.img.html
I can still only go to fastboot and not to recovery, I just have no idea why...
Thanks for help allready
GrayGhost93 said:
Hello, I had some trouble after a CM Update. It was only possible to boot in FastBoot, now I'm a bit further and can go to Recovery and also install ROMs.
But I'm not able to boot to the system, everytime I reboot I get into recovery, does anyone has a hint for me? What to do in this case?
Right now I have this version of twrp installed: https://forum.xda-developers.com/devdb/project/dl/?id=21835
But with the officiall one from here: https://dl.twrp.me/oneplus3/twrp-3.0.2-1-oneplus3.img.html
I can still only go to fastboot and not to recovery, I just have no idea why...
Thanks for help allready
Click to expand...
Click to collapse
Download https://www.androidfilehost.com/?fid=385035244224394867 to your PC.
Reboot into fastboot. Flash via fastboot (fastboot flash recovery twrp....img). Reboot into recovery. Reboot to system ... should work now, hopefully.
Keep me posted.
Download Official Recovery from OP home page and flash it
fastboot flash recovery OFFICIALRecovery.img
into Official Recovery, Flash OOS.
After booting Reboot Fastboot again.
and flash twrp, on twrp you can flash Roms.
CM14 need newest firmware and modem...
Sorry my English...
Had the same problem after I appplied the ota. I was on twrp. What I did was adb sideloaded the OOS 4 then I was able to boot to system.
Download https://www.androidfilehost.com/?fid=385035244224394867 to your PC.
Reboot into fastboot. Flash via fastboot (fastboot flash recovery twrp....img). Reboot into recovery. Reboot to system ... should work now, hopefully.
Keep me posted.
Click to expand...
Click to collapse
Did it, but same issue...
Download Official Recovery from OP home page and flash it
fastboot flash recovery OFFICIALRecovery.img
into Official Recovery, Flash OOS.
After booting Reboot Fastboot again.
and flash twrp, on twrp you can flash Roms.
CM14 need newest firmware and modem...
Click to expand...
Click to collapse
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
Had the same problem after I appplied the ota. I was on twrp. What I did was adb sideloaded the OOS 4 then I was able to boot to system.
Click to expand...
Click to collapse
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Got it a bit further, could start it by simply reboot and now I am in the system, which was installed (LineageOS 14.1) - seems to work now, thanks a lot guys!!!
GrayGhost93 said:
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Click to expand...
Click to collapse
Download the official recovery here:
http://oneplusroms.s3.amazonaws.com...694615&Signature=1Momnxm8gHWw03D401Oof5YxnE4=
What is the exact output if you do
Code:
fastboot flash recovery recovery_OBT7.img
OOS4 is the stable release. I would strongly recommend it over cm right now. It's actually quite polished.
You can download the official full zip here:
http://otafsc.h2os.com/patch/amazon...en_16_OTA_035_all_1612310359_e10cadfb2af7.zip
GrayGhost93 said:
Did it, but same issue...
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Got it a bit further, could start it by simply reboot and now I am in the system, which was installed (LineageOS 14.1) - seems to work now, thanks a lot guys!!!
Click to expand...
Click to collapse
Flash TWRP 3.0.2-22 (download available in other questions. Wait a bit will link it.
Edit: https://forum.xda-developers.com/attachment.php?attachmentid=3971072&d=1481920669 )
See if you can boot into recovery. If you can. Flash whatever rom you have or nandroid backup.
Also are you sure you're using the correct modem and firmware version? Download those recommended in the rom you're using and flash those along with the rom.
http://forum.xda-developers.com/one...dem-collection-flashable-zips-t3468628/page23
Recently I couldn't boot after flashing different firmware, same with different rom without its firmware and modem.
Recently I flashed through TWRP Resurrection Remix new 7.1.1 Nougat on my Tmobile Note3. Was working great. I had the newest twrp 3.0. I was looking at a custom ROM that said I would need CWM so I downloaded CWM from Google play and I ran it. I decided to back up through CWM and it rebooted my phone. My phone rebooted into recovery, and is stuck in recovery bootloop now. It keeps rebooting into recovery. I tried to fix by taking out battery for a long time but when I turn it on againit goes back to recovery in the loop. It can power into download mode. I don't know what to do in that mode though. Please help me. If I'm to use a computer to flash a different OS please include all links to find the downloads as well as the links for finding the usb drivers. Anyone know what I'm to do?
pax216 said:
Recently I flashed through TWRP Resurrection Remix new 7.1.1 Nougat on my Tmobile Note3. Was working great. I had the newest twrp 3.0. I was looking at a custom ROM that said I would need CWM so I downloaded CWM from Google play and I ran it. I decided to back up through CWM and it rebooted my phone. My phone rebooted into recovery, and is stuck in recovery bootloop now. It keeps rebooting into recovery. I tried to fix by taking out battery for a long time but when I turn it on againit goes back to recovery in the loop. It can power into download mode. I don't know what to do in that mode though. Please help me. If I'm to use a computer to flash a different OS please include all links to find the downloads as well as the links for finding the usb drivers. Anyone know what I'm to do?
Click to expand...
Click to collapse
Hello,
I will move your thread to the correct section, whereas experts there might be able to assist you.
Regards
Vatsal,
Forum Moderator.
pax216 said:
Recently I flashed through TWRP Resurrection Remix new 7.1.1 Nougat on my Tmobile Note3. Was working great. I had the newest twrp 3.0. I was looking at a custom ROM that said I would need CWM so I downloaded CWM from Google play and I ran it. I decided to back up through CWM and it rebooted my phone. My phone rebooted into recovery, and is stuck in recovery bootloop now. It keeps rebooting into recovery. I tried to fix by taking out battery for a long time but when I turn it on againit goes back to recovery in the loop. It can power into download mode. I don't know what to do in that mode though. Please help me. If I'm to use a computer to flash a different OS please include all links to find the downloads as well as the links for finding the usb drivers. Anyone know what I'm to do?
Click to expand...
Click to collapse
I find it odd that you would find a ROM that suggests CWM instead of TWRP, but the way I see it is you go back to Resurrection Remix or try to flash the new ROM you found with TWRP (2.8.7 is recommended)
You can download the .tar file for TWRP 2.8.7 here: https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.img.tar.html
For clearer instructions, you can visit this post: https://forum.xda-developers.com/showthread.php?t=2672393
These are instructions to flash back to stock, root and install TWRP 2.8.7
I suggest right after doing this, you flash the ROM you want, that will guarantee a "cleaner" installation of the ROM
Good luck!
ShaDisNX255 said:
I find it odd that you would find a ROM that suggests CWM instead of TWRP, but the way I see it is you go back to Resurrection Remix or try to flash the new ROM you found with TWRP (2.8.7 is recommended)
You can download the .tar file for TWRP 2.8.7 here: https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.img.tar.html
For clearer instructions, you can visit this post: https://forum.xda-developers.com/showthread.php?t=2672393
These are instructions to flash back to stock, root and install TWRP 2.8.7
I suggest right after doing this, you flash the ROM you want, that will guarantee a "cleaner" installation of the ROM
Good luck!
Click to expand...
Click to collapse
Thank you for your help. I did all the clear instructions from the thread. I couldn't get the CF auto root to stick. Also couldn't find a surfboard for TWRP 2.8.7, they only have 2.8.0 on the TWRP site, or TWRP 3.0. Ultimately I've got my original factory stock lollipop back. I'm no longer rooted. I had rooted before through KingRoot. I tried again and it says that I'm out on a list for root for my phone. So my phone works again. I guess I should be happy with that.
If you want to root, you could try flashing cfautoroot with Odin.
audit13 said:
If you want to root, you could try flashing cfautoroot with Odin.
Click to expand...
Click to collapse
I did try to flash CF auto root with Odin after I flashed back to the stock ROM. But it didn't work. It stayed stuck on the T mobile screen for a very long time. So I just gave up trying to root again and stayed with the stock ROM without root. Thanks. Maybe I'll try again and see if it'll work next time.
Flashing twrp with Odin and flashing supersu from twrp had always worked for me.
audit13 said:
Flashing twrp with Odin and flashing supersu from twrp had always worked for me.
Click to expand...
Click to collapse
Will that root my device?
Yes. When I want root with stock recovery, I use cfautoroot. When I want a custom recovery and root, I flash twrp and supersu.
audit13 said:
Yes. When I want root with stock recovery, I use cfautoroot. When I want a custom recovery and root, I flash twrp and supersu.
Click to expand...
Click to collapse
OK. Thanks. Also, which version of TWRP? I can't seem to find a download for 2.8.7.0, only for 2.8.0.0 and 3.0 on the official TWRP site. Also where can I find SuperSu? Do I flash SuperSU with TWRP once TWRP is on phone? I read somewhere that the best version for TWRP is 2.8.7.0, but I can't find it anywhere.
Twrp for T-Mobile note 3: https://dl.twrp.me/hltetmo/
Flash twrp using Odin. Olen Odin, do not check anything except f reset time. Flash twrp. When you see the word reset in the status window, remove USB cable from phone, remove battery, replace battery, use button combination to boot into recovery, connect to computer, copy supersu to phone memory, flash supersu from twrp.
Supersu: https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
audit13 said:
Twrp for T-Mobile note 3: https://dl.twrp.me/hltetmo/
Flash twrp using Odin. Olen Odin, do not check anything except f reset time. Flash twrp. When you see the word reset in the status window, remove USB cable from phone, remove battery, replace battery, use button combination to boot into recovery, connect to computer, copy supersu to phone memory, flash supersu from twrp.
Supersu: https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Click to expand...
Click to collapse
OK. Thank you. I will get to this next time my friend is available with the computer.
I've got a rooted phone w/ an unlocked bootloader.
I've installed TWRP using ADB.
When I try to get into recovery (by using the physical buttons while booting) nothing happens. When I try to get into recovery via ADB, I get "no devices found"
What am I doing wrong?
Some background:
I flashed KK 4.4 using Flashtool.
Then I successfully installed and accessed TWRP. I tried and failed to install a custom ROM (AICP), but couldn't get it to sideload.
At that point, my device had no OS, so I re-flashed KK4.4, hoping that I could get the ADB sideload to work if I started from the beginning.
But now I'm back at the beginning, and I can't even get into recovery.
When I flash TWRP via fastboot, it successfully writes. But I can't boot into recovery.
Please help!
Disregard. I was able to access TWRP after I flashed the boot.img that came in the original platform tools.
It goes without saying that once I flash that boot.img, I'm unable to get into KK 4.4. I am, however, able to get back to TWRP, where hopefully I'll be able to flash a ROM.
Once again, however, I'm not able to flash AICP. It fails every single time.
mulcahey said:
Disregard. I was able to access TWRP after I flashed the boot.img that came in the original platform tools.
It goes without saying that once I flash that boot.img, I'm unable to get into KK 4.4. I am, however, able to get back to TWRP, where hopefully I'll be able to flash a ROM.
Once again, however, I'm not able to flash AICP. It fails every single time.
Click to expand...
Click to collapse
You can try to pull boot img from aicp and flash it in two, then try to flash the rom, but not sure. You may have to flash LP first, just use a prf. Also, if you use Emma to update bootloader, (if you didn't already), then you can use real recovery, (twrp 3+), and it should work.
mulcahey said:
Disregard. I was able to access TWRP after I flashed the boot.img that came in the original platform tools.
It goes without saying that once I flash that boot.img, I'm unable to get into KK 4.4. I am, however, able to get back to TWRP, where hopefully I'll be able to flash a ROM.
Once again, however, I'm not able to flash AICP. It fails every single time.
Click to expand...
Click to collapse
I just finished process myself, just to test, and works fine-
1. Download Emma
2. Download twrp3
3. Download Kingroot
4. Download Rashr
Plug phone into computer in flash mode after starting Emma, and you'll see option to flash newest fw. After flashing, restart and install Kingroot. After rooting, use Rashr to flash twrp3. Then power off, and hold power and volume down to enter recovery.
I just finished process myself, just to test, and works fine-
1. Download Emma
2. Download twrp3
3. Download Kingroot
4. Download Rashr
Click to expand...
Click to collapse
THANK YOU! I'm not sure what prf or Emma are, but I'll find out on my own.
Is there any way to do this that doesn't involve KingRoot? The whole "sends your info to a Chinese IP" aspect of KingRoot creeps me out.
mulcahey said:
Is there any way to do this that doesn't involve KingRoot? The whole "sends your info to a Chinese IP" aspect of KingRoot creeps me out.
Click to expand...
Click to collapse
two ways:
1) after you install the rom using EMMA connect the phone in fastboot mode and flash Advanced Kernel 18.1. it comes with its own twrp recovery. then boot to recovery and flash SuperSU zip.
2) after you install the rom using EMMA connect the phone in fastboot mode and flash TWRP recovery, then boot to recovery and flash SuperSU zip.
karamancho said:
two ways:
1) after you install the rom using EMMA connect the phone in fastboot mode and flash Advanced Kernel 18.1. it comes with its own twrp recovery. then boot to recovery and flash SuperSU zip.
2) after you install the rom using EMMA connect the phone in fastboot mode and flash TWRP recovery, then boot to recovery and flash SuperSU zip.
Click to expand...
Click to collapse
Thank you!!! Eager to try these.
Is SuperSU zip secure? Do we know that it's not Chinese malware?
Can't get into recovery -z1c (amami)
I unlocked bootloader, have installed TWRP 3, then LineageOS through TWRP. But now i can't access recovery (twrp).
-Phone powers up
-pink light
-immediately i press volume up (volume down doesn't do anything)
-orange light shows for a second
-phone restarts normally
----------------------
So how can i access twrp recovery mode?
a-ha said:
I unlocked bootloader, have installed TWRP 3, then LineageOS through TWRP. But now i can't access recovery (twrp).
-Phone powers up
-pink light
-immediately i press volume up (volume down doesn't do anything)
-orange light shows for a second
-phone restarts normally
----------------------
So how can i access twrp recovery mode?
Click to expand...
Click to collapse
Haven't tried Lineage yet, but with CM, they had their own recovery which had to be overwritten after flash. Boot up, install Rashr, flash TWRP IMG with Rashr, then try again.
Also, real recovery is a good idea, if you don't have it yet. You need to flash stock with Sony Emma tool, then you have ta update, with real recovery capability.
mulcahey said:
Thank you!!! Eager to try these.
Is SuperSU zip secure? Do we know that it's not Chinese malware?
Click to expand...
Click to collapse
It's fine.
a-ha said:
I unlocked bootloader, have installed TWRP 3, then LineageOS through TWRP.
Click to expand...
Click to collapse
Has Lineage been released for Amami? I don't see it on the downloads page.
mulcahey said:
Has Lineage been released for Amami? I don't see it on the downloads page.
Click to expand...
Click to collapse
Unofficial - https://forum.xda-developers.com/sony-xperia-z1-compact/general/z1c-nougat-roms-t3460868
My phone is rooted with magisk and i have twrp recovery..
I am getting latest miui OTA update i want to update my phone but I don't wanna lose my all data is there any way to update miui without losing data on rooted phone ....
What i have?
1. Rooted
2.TWRP RECOVERY
What i don't want to lose?
1. My current Data
2. Magisk root...
Thanks...
Create backup, flash FULL OTA (not incremental) and flash magisk, wipe caches (recommended) and reboot.
If you'd like OTA support you can switch to supporting recovery like redwolf. Read the forums.
If i do what you have mentioned above , so there is no issue of a data loss ?? Or i have to use another recovery?
Hi,
firstly I am sorry for reviving an old thread, but I could not find any answer to this question. Also I am a new member and this is my first post (sorry, if I make any mistakes).
So how do I update my MIUI in the correct way and easily without any dataloss? A step-by-step guide would be very nice.
I have MIUI Global 10.3.2.0 Stable and want to update to MIUI Global 11.0.3.0 Stable.
"Normally" (before my device was rooted) I would directly update via system-update, but I am kind of scared since my phone is rooted now. It is the first time I have rooted my device, so I am new to this topic. I have used Redwolf to root my RN5P, but without flashing it as my recovery (just "fastboot boot redwolf.img", the normal TWRP did not work, since it always asked for password), also I have Magisk 20.1 (Stable) and cam2api installed.
Hope someone can help me. Thanks ahead.
yasin0005 said:
If i do what you have mentioned above , so there is no issue of a data loss ?? Or i have to use another recovery?
Click to expand...
Click to collapse
No data loss happen for me.. Like as you mine was rooted and twrp.. Just flash full recovery rom zip flash with latest version twrp( Not ota)
---------- Post added at 05:22 PM ---------- Previous post was at 05:18 PM ----------
mitu725 said:
No data loss happen for me.. Like as you mine was rooted and twrp.. Just flash full recovery rom zip flash with latest version twrp( Not ota)
Click to expand...
Click to collapse
Yes you lost magisk root... Just flash after, like as you did before
I am waiting since two weeks. Please someone answer/help me. Thanks.
- Get the recovery ROM from https://forum.xda-developers.com/redmi-note-5-pro/how-to/received-9-5-17-ota-update-t3813192
- fastboot into custom recovery, if not already permanently installed
- flash the ROM
- re-install Magisk through recovery
- re-install camera2api
Other possibility, since you have only rooted your device, but haven't installed any custom recovery
- use the builtin update from MIUI
- fastboot any custom recovery
- re-install Magisk
- re-install camera2api
Neither way any data will be lost, nor will any app be de-installed
Tischbein said:
- Get the recovery ROM from https://forum.xda-developers.com/redmi-note-5-pro/how-to/received-9-5-17-ota-update-t3813192
- fastboot into custom recovery, if not already permanently installed
- flash the ROM
- re-install Magisk through recovery
- re-install camera2api
Other possibility, since you have only rooted your device, but haven't installed any custom recovery
- use the builtin update from MIUI
- fastboot any custom recovery
- re-install Magisk
- re-install camera2api
Neither way any data will be lost, nor will any app be de-installed
Click to expand...
Click to collapse
Thank you for your reply. But in both ways I have to install custom recovery. That is not what I want (else I would have done it earlier in the frist place when I have rooted my phone). I want to keep the original MIUI recovery and "everything original/stock as possible" (that's the reason I stick to MIUI and do not use any custom rom).
Mura1 said:
Thank you for your reply. But in both ways I have to install custom recovery. That is not what I want (else I would have done it earlier in the frist place when I have rooted my phone). I want to keep the original MIUI recovery and "everything original/stock as possible" (that's the reason I stick to MIUI and do not use any custom rom).
Click to expand...
Click to collapse
Read it properly.. In the second method its written that we should fastboot any recovery not flash(install) it.. I hope your problem is solved now:good:
My question is i have orange fox recovery installed. How do I install ota ? Is just flashing the full rom zip enough? I want to preserve data.
@Mura1 you should only fastboot into any custom recovery. This you must have done in the past to root your device. It's the same way.
@Anymeofyou yes this should work. It's the same way I upgrade the device. Afterwards I flash the custom recovery and magisk as well, but that may be only a precausion. In the past I had to fastboot TWRP and flash TWRP once again within TWRP to have it installed. OrangeFox should keep the custom cevoery after an update, but since its only a few seconds to flash OF once again, it doesn't hurt me.
Till now no loss of data recognized.
Ah, thank you @Anymeofyou, know I got it and big thanks to @Tischbein in the first place . Sorry, for having to reading it multiple times (my bad).
I have updated now successfully. Have a nice day.
Tischbein said:
@Mura1 you should only fastboot into any custom recovery. This you must have done in the past to root your device. It's the same way.
@Anymeofyou yes this should work. It's the same way I upgrade the device. Afterwards I flash the custom recovery and magisk as well, but that may be only a precausion. In the past I had to fastboot TWRP and flash TWRP once again within TWRP to have it installed. OrangeFox should keep the custom cevoery after an update, but since its only a few seconds to flash OF once again, it doesn't hurt me.
Till now no loss of data recognized.
Click to expand...
Click to collapse
Thanks @Tischbein