Related
I have tried several pc and cable, mtp is activated, driver installed.... The pc is not detecting the phone ( also in download mode), only charge it, lg have changed the usb board but no succes... Someone have an idea?
paplam said:
I have tried several pc and cable, mtp is activated, driver installed.... The pc is not detecting the phone ( also in download mode), only charge it, lg have changed the usb board but no succes... Someone have an idea?
Click to expand...
Click to collapse
Does it show up in the device manager when you connect it?
no
archie87 said:
Does it show up in the device manager when you connect it?
Click to expand...
Click to collapse
Please, i need help!
paplam said:
Please, i need help!
Click to expand...
Click to collapse
Which windows are you using? I use win xp and my pc can't detect the phone but on my win 8 laptop, it works.
tried xp, seven 32 and 64, osx...
its a problem with the phone, not a pc problem...
galeonui9590 said:
Which windows are you using? I use win xp and my pc can't detect the phone but on my win 8 laptop, it works.
Click to expand...
Click to collapse
i assume you are still able to charge your phone? do you have a custom rom installed? reinstall latest proper drivers. i would try a factory reset or a hard reset. if that does not work it may be a hardware issue.
http://www.lg.com/ca_en/support-mobile/lg-LGE973#pcsync
have tried lot of rom, the phone charge, proper driver reinstalled, how to do a hard reset?
gentledroid17 said:
i assume you are still able to charge your phone? do you have a custom rom installed? reinstall latest proper drivers. i would try a factory reset or a hard reset. if that does not work it may be a hardware issue.
http://www.lg.com/ca_en/support-mobile/lg-LGE973#pcsync
Click to expand...
Click to collapse
paplam said:
have tried lot of rom, the phone charge, proper driver reinstalled, how to do a hard reset?
Click to expand...
Click to collapse
Turn phone completely off. Hold down power and volume down. Follow onscreen instructions.
Sent from my LG-E973 using xda app-developers app
i have do the hard reset with no sucess, phone wont connect to pc...:crying:
gentledroid17 said:
Turn phone completely off. Hold down power and volume down. Follow onscreen instructions.
Sent from my LG-E973 using xda app-developers app
Click to expand...
Click to collapse
any way to convert a stock kdz to a .bin file, maybe it can resolve my problem?
Nope,no way.
If you have a wireless network home,you can always use airdroid to transfer files to/from phone.
Sent from LG E975 pwd by CarbonRom
I had this issue, had to RMA it.
Most likely, the device is still covered by manufacturer's waranty, use it!
Have done this and they changed the usb port on the phone but that didnt solve the problem, after, the guy at the cellstore said me that because i have changed the rom they cannot send it again to lg...
t1mman said:
I had this issue, had to RMA it.
Most likely, the device is still covered by manufacturer's waranty, use it!
Click to expand...
Click to collapse
paplam said:
Have done this and they changed the usb port on the phone but that didnt solve the problem, after, the guy at the cellstore said me that because i have changed the rom they cannot send it again to lg...
Click to expand...
Click to collapse
Indeed, unless you can go back to stock... Which is kinda hard without USB :|
Anyway to return stock without usb?
do you have 32 or 64bit Windows?
tried another usb port and maybe another cable if you ain't using the stock LG OEM USB cable.
if it don't wanna get detected on your pc try a friends pc or laptop see if that work.
32 & 64, osx , ubuntu all tried with different pc and cable.
puma99dk| said:
do you have 32 or 64bit Windows?
tried another usb port and maybe another cable if you ain't using the stock LG OEM USB cable.
if it don't wanna get detected on your pc try a friends pc or laptop see if that work.
Click to expand...
Click to collapse
paplam said:
32 & 64, osx , ubuntu all tried with different pc and cable.
Click to expand...
Click to collapse
that sounds weird then because last time i had this problem it was the cable i used on my own pc it didn't work here, but it did on my dad's laptop.
it was when i found out that the original lg oem usb cable couldn't charge my phone anymore, but data works fine.
I went to a cellphone reparation shop, they tested it and tell me that it must be an hardware or firmware issus with the phone...
..
puma99dk| said:
that sounds weird then because last time i had this problem it was the cable i used on my own pc it didn't work here, but it did on my dad's laptop.
it was when i found out that the original lg oem usb cable couldn't charge my phone anymore, but data works fine.
Click to expand...
Click to collapse
First of all my english is terrible
I downloaded and successfully installed the kasha malaga android into my nokia x,I opened it and tried to open the play store but it keeps force closing i tried everything the internet said but nothing worked so i decided to try reinstalling it. i went to the setting and factory reset my nokia x. when i turn on my phone it of course let me to the setup wizard.but when i accepted to choose English as my primary language and press next and then a pop up comes out saying that setup wizard has stopped working and then it restart the setup wizard process so basically im stuck there. the only way i can acess my setting is open wifi let it sense and then press the available wifi network. then it takes me to wifi setting from there i can back and be at the settings!i even tried hard reset that didn't work..... and the worst part is my computer cannot sense my phone through usb cable. Pls help im desperate!
try this
you can follow the steps here http://forum.xda-developers.com/showthread.php?t=2668005
files are here http://forum.xda-developers.com/showthread.php?t=2779284
bryanjay420 said:
you can follow the steps here http://forum.xda-developers.com/showthread.php?t=2668005
files are here http://forum.xda-developers.com/showthread.php?t=2779284
Click to expand...
Click to collapse
that was my answer to all.. but my phone can't detect my computer or any computer. Is there a way to flash using the sd card on the normal recovery that nokia gave?
Whiteshockwave said:
that was my answer to all.. but my phone can't detect my computer or any computer. Is there a way to flash using the sd card on the normal recovery that nokia gave?
Click to expand...
Click to collapse
use updated usb driver by dom at the general thread. then flash stock rom by using nokia x flasher. maybe it should work
Whiteshockwave said:
that was my answer to all.. but my phone can't detect my computer or any computer. Is there a way to flash using the sd card on the normal recovery that nokia gave?
Click to expand...
Click to collapse
i also having problem with the usb drivers. in the device manager i cant install updated drivers for my xl (it shows Exclamation point) but nokia x flasher can detect it in fastboot mode (holding power button + volume down for 15 seconds) then i connect my phone to my pc
hard reset
You can try hard reset by hard key
none of the above worked. Looks like my phone is a goner
Don't be so negative. I has bricked my phone but I recovered it and its fully working now. Just flash your phone with stock rom via nokia care suite and your phone will be as good as new.
Sent from my Nokia_XL using Tapatalk
anubhav_143 said:
Don't be so negative. I has bricked my phone but I recovered it and its fully working now. Just flash your phone with stock rom via nokia care suite and your phone will be as good as new.
Sent from my Nokia_XL using Tapatalk
Click to expand...
Click to collapse
and dont forget to make backup always...almost bricked my phone lot of times by installing custom rom but still managed to recover by flashing backups from different recoveries of it that didnt work flash with stock rom
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
mohamed_ragab09 said:
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
Click to expand...
Click to collapse
Can you get into download mode?
i tried to press power + volume uo or down but nothing happen
mohamed_ragab09 said:
i tried to press power + volume uo or down but nothing happen
Click to expand...
Click to collapse
Press voulme up and connect to pc.
is there a way to get into fastboot other than power+volume down ?
via adb or something ?
mohamed_ragab09 said:
i tried to press power + volume uo or down but nothing happen
Click to expand...
Click to collapse
Try volume up+connect phone to PC. If it isn't detected try charging it for 30 minutes and then the same thing. If that doesn't work try a different USB cable and/or different USB port on your PC.
i will try and get back to you .. thank you so much i appreciate your help
mohamed_ragab09 said:
i will try and get back to you .. thank you so much i appreciate your help
Click to expand...
Click to collapse
Any news?
NeptunePH said:
Try volume up+connect phone to PC. If it isn't detected try charging it for 30 minutes and then the same thing. If that doesn't work try a different USB cable and/or different USB port on your PC.
Click to expand...
Click to collapse
i tried with no luck the phone cant be detected although it was being detected before the failed flashing attempt .. can windows 10 64 bit be the problem here ? what else can i do to unbrick the phone ?
and i get a message that the usb not recognized or malfunctioned
mohamed_ragab09 said:
and i get a message that the usb not recognized or malfunctioned
Click to expand...
Click to collapse
That sounds exactly like the situation I had. Your motherboard is probably fried. Get it to your service center. Especially if you have the warranty.
NeptunePH said:
That sounds exactly like the situation I had. Your motherboard is probably fried. Get it to your service center. Especially if you have the warranty.
Click to expand...
Click to collapse
im out of warranty .. is there is another way ? what did you do ?
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
mohamed_ragab09 said:
im out of warranty .. is there is another way ? what did you do ?
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
Click to expand...
Click to collapse
I was in the same situation. For me sometimes I got port 9008 and sometimes USB device not recognized. However every time I got a Sahara Fail. Keep trying to flash the s288 row with different cables/ports. That's all I can think of.
NeptunePH said:
I was in the same situation. For me sometimes I got port 9008 and sometimes USB device not recognized. However every time I got a Sahara Fail. Keep trying to flash the s288 row with different cables/ports. That's all I can think of.
Click to expand...
Click to collapse
what exactly did work for you ?
mohamed_ragab09 said:
what exactly did work for you ?
Click to expand...
Click to collapse
I tried every method possible but nothing worked. Since I was under warranty I took it to a service center where they told me the Motherboard was fried.
Oppssss mother board fried.... Im listening this first time.
he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help
hi can you be speciific
mohamed_ragab09 said:
he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help
Click to expand...
Click to collapse
HI.. can you get from your friend a step by step guide so that it can be useful for everyone facing the same problem..??
venkat7117 said:
HI.. can you get from your friend a step by step guide so that it can be useful for everyone facing the same problem..??
Click to expand...
Click to collapse
he just said he heated on the memory chips or something like that .. apparently the flashing problem was my win 10 device . because once the phone show 9008 com on flashing software the flash process went ok on his win 7 device
There's another thing that I would like to add. When the flashing fails and phone becomes dead(seems dead), it is not in a powered off state i.e. it actually is in a dormant state in some occasions. That is, it doesn't respond to any actions performed like plugging to pc, plugging charger e.t.c.
For older phones with a removable battery, we could simply remove the battery and turn the phone off completely before trying to flash again.
But since newer phones like our Vibe P1 doesn't have a removable battery, we need to switch the phone off manually.
There is a method for that given in this link.
I was doing some experiment with DriveDroid and now I am in big mess.
I think I messed up with drivedroid settings and I was not able to see my phone (oneplus 3 rooted LOS 15.1 ) on my computers.
I have tried different computers but all cant detect my phone.
I have tried drivedroid wizard, different usb systems, different usb settings and no luck.
I have tried uninstalling the drivedroid and still no luck.
The phone was going in charging mode only. Its was not going to MTP mode so I can see the phone internal storage in computer
I have tried to do factory reset also but no luck.
Now I mistakenly wiped data partition also and now the phone is with
No OS
No USB detection on phone while in TWRP
No OTG detection
No any ROM.zip file in phone memory.
When I am on TWRP and connect my phone in computer I am seeing same error message and cant see my phone interenal storage.
Now what to do? Any way to flash ROM ?
I am in big mess, and I dont want to spend money on new phone as of now
I hope someone will be my angle and suggest me something to recover and save me from this mess...
Crying out loud now...
Hi, i think you can use adb sideload with twrp
Uruloki64 said:
Hi, i think you can use adb sideload with twrp
Click to expand...
Click to collapse
Phone is not recognized in computer while in twrp mode so it is not able to connct to adb via USB.
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
aj141 said:
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
Click to expand...
Click to collapse
Ya.. going there tomorrow. Lets see what they say about it.
amit3880 said:
Ya.. going there tomorrow. Lets see what they say about it.
Click to expand...
Click to collapse
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Hayatzada said:
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
amit3880 said:
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
Click to expand...
Click to collapse
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
tnsmani said:
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
Click to expand...
Click to collapse
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Hayatzada said:
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Click to expand...
Click to collapse
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
reviewed post
tnsmani said:
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
Click to expand...
Click to collapse
tried to follow the unbrick guide on windows 10 but phone is not seen as QSBULK device in device manager.
I am going to try on windows 7 as few post said that windows 7 would be better for unbricking than windows 10.
finger crossed, right now flashing windows 7 live iso on USB.
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
amit3880 said:
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
Click to expand...
Click to collapse
So sorry about that .... Sad news
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
BADA 187 said:
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
Click to expand...
Click to collapse
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
amit3880 said:
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
Click to expand...
Click to collapse
damn sorry to hear man.
BADA 187 said:
damn sorry to hear man.
Click to expand...
Click to collapse
Got 6T yesterday.... .. Yay!!
Couldnt find other phone competative in the price range.
Time to change the xda signature...
Although I bought 6T now and am kind of happy with that, but I am still missing my oneplus 3 and want to experiment on getting it revived.
By any chance someone can help me answering my doubts.. I would be greatful..
1. Is it ok to replace oneplus3's motherboard with oneplus 3t motherboard ? If by any chance i get any resell op3 or op3t in dirt cheap price I want to know if its ok to use 3T's motherboard.
2. Is there any way I can turn on the wifi from within TWRP and so I can connect to phone via adb over wifi/tcpip ??
Thank you all in advance.