Related
Hi XDA,
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
SuperUub said:
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
Click to expand...
Click to collapse
If not even adb detects it, i'm pretty sure you're buggered, mate.
did you try and leave the battery out for some 10 min or more?
If adb does not detect the phone after that, then it seems to be a brick for real.
Is your phone stop at the "samsung" when you turn on your phone?
If is this,it's very easy to unbrick
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
+
Yes this way usually works. I've tested this way.
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Odin to detect
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
I had my mainboard replaced at a service center... Probably not the news you would have liked, but I'm afraid that's your next step as well.
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
This worked for me too, try to charge your battery in another phone if possible
bobcota said:
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
Click to expand...
Click to collapse
same problem
same problem here
voetbalremco said:
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Click to expand...
Click to collapse
i also have the same prblem here just now , i tried to flash this ROM but i forgot to wipe data/factory reset the phne and i unintentionally flashed the rom without wiping it :'( and now, dont boot at all but can still turned on and ended up just "samsung" appearing on the screen . please help :crying::crying:
I've bricked my Galaxy Gio when i flashed a custom kernel.
Hi There I also have the same problem. I installed Galaxy Ace's Kernel onto my Galaxi Gio, Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
S[B said:
[/B]uperUub;20668671]Hi XDA!
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Click to expand...
Click to collapse
Not either going to Download Mode
trackIDtracker said:
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Click to expand...
Click to collapse
I had just unrooted my android in order to solve storage memory issue, because i didn´t rooted my Android using clockwork mod, I simply used a Rar that I place in the SD card called RootGalaxyGio that granted me the root the easy way. I unrooted my mobile yesterday and wiped data/ restore factory settings. The problem that I encountered was that I lost wi fy connectivity om my Android. Tried everything. So I decide to flash it via Odin_Multi_Downloader_v4.42. I download the GIO_v1.0.ops and the "one package" S5660XXKTK_S5660TCLKT1_TCL_vodafone.
Odin went on for 30 minutes to try to install the firmware and it wasn´t budging, so in my despair and ignorance I unplugged it. My Gio doesn´t start, shows an icon simbolizing a broken connection between the computer and the android, yet the download mode still functions. I don´t know what went wrong I follow all the steps in the tutorial I read. I´ve tried 4 times to flash it with odin and a first problem that occured in the first place repeats it self.
Can anyone help me sort this trouble out or will I have to try my luck with samsung?
Flashing gio with odin should take only 5 minutes? have you taken out sd card and your sim card before flashing? did you get any message like <Added!!> after you connected your phone to pc while in download mode? if you still can access download mode then you still got chance and be sure you got drivers installed to pc
Some computers can't flash with Odin, try another computer. The same thing happened to me while using the family computer with Odin, it didn't work. But on my own it works fine.
Sent from my Nexus 7
tico96 said:
Flashing gio with odin should take only 5 minutes? have you taken out sd card and your sim card before flashing? did you get any message like <Added!!> after you connected your phone to pc while in download mode? if you still can access download mode then you still got chance and be sure you got drivers installed to pc
Click to expand...
Click to collapse
I did all the procedures, no SD card, no sim card. It did show added on odin. The android was detected. I had usb samsung mobile driver installed. The only thing I didn´t have was kies. I thought that the usb driver was enough. Could the issue have happened due to that?
Should I keep on trying to fix my droid with Odin or switch to unbrickable methods?
Robotechvfx said:
I did all the procedures, no SD card, no sim card. It did show added on odin. The android was detected. I had usb samsung mobile driver installed. The only thing I didn´t have was kies. I thought that the usb driver was enough. Could the issue have happened due to that?
Should I keep on trying to fix my droid with Odin or switch to unbrickable methods?
Click to expand...
Click to collapse
Read the post above you.
Sent from my.... Actually, who needs to know anyway?
Problem solved my Gio is back from the dead
iok1 said:
Some computers can't flash with Odin, try another computer. The same thing happened to me while using the family computer with Odin, it didn't work. But on my own it works fine.
Sent from my Nexus 7
Click to expand...
Click to collapse
You were right the problem was my laptop. The funny thing is that I switched from my house HP laptop to my work HP laptop, that has inferior hardware, and it solved my issue. Did it all with Odin, didn´t have to resourt to unbrick software...
Thank you for all your help and remenber: the simplest answer is always the best one!!!
Robotechvfx said:
You were right the problem was my laptop. The funny thing is that I switched from my house HP laptop to my work HP laptop, that has inferior hardware, and it solved my issue. Did it all with Odin, didn´t have to resourt to unbrick software...
Thank you for all your help and remenber: the simplest answer is always the best one!!!
Click to expand...
Click to collapse
Glad it went well
Sent from my Nexus 7
Hey all,
Yesterday I was about to flash a new ROM on my wifes Xperia S. She had an old ICS rom and I decided to go for the PAC MAN JB 4.2.2 ROM. Seemed ok.
I own a SGS2 myself so I consider myself a total noob when it comes to the Sony.
I know CWM works on on the XS and I am pretty sure I installed it when I romed it last time. Although I didn't remember how to enter CWM mode so I installed it again through that .bat file that comes with it.
I downloaded the ROM and the GAPPS and copied both to the phone. And now I thought I was set and went for it. Of course I did a Nandroid backup before and also from within the phone a full backup in Backup & Restore. Bootloader is unlocked by the way.
So now I boot into CWM and I do a full wipe/factory reset. I clear the cache and dalvik and also I format the system as he guides us to do in his installation video.
I then installed the rom or at least tried. Got the status 7 together with some error I can't remember.
I read then that people had issues downloading the rom with google chrome which sounds pretty far fetched but I decided to do what other did and downloaded the rom from firefox.
Then within CWM I thought to start the USB and copy it directly in CWM since I already had reset the phone and didn't want to go through the "new phone" routine. But the USB in CWM didn't work so I had to restart the phone.
It then got stuck on the initial SONY logo screen and I'm stuck there now.
I have installed the Flash tool from SONY coz I read in another thread that the only way out is to install stock rom. However when I connect the phone holding volume down windows 8 always say that the USB device is not recognized. I have of course rebooted the PC after.
I'm going to try this on my Windows 7 PC as well later after work but I dread I will be stuck there as well.
Can anyone shed some light on how I can get my wifes Xperia S to be recognized by her Windows 8 laptop? Or have I bricked her phone?
I have thought many times that I bricked my SGS2 but always came out on top, I don't want to lose this battle either.
if it says "Unknown Devices" when you plug the phone to the computer, try change an USB line or change a computer
if it says "Unable to install the driver" or another something like this when you plug the phone to the computer, try install the Flashtool driver
...any screenshots?
Windows 8 gives a balloon tip saying exactly "USB Device not recognized". And I did install the Flashtool to get the driver but I guess I still miss the correct driver here.
I will do some more troubleshooting after work. I just thought maybe someone had similar problem and had a quick and easy solution.
It also happend to me, just turn it off and flash stock firmware with flashtool (select all under wipe)
Sent from my LT26i using xda app-developers app
Gripa98 said:
It also happend to me, just turn it off and flash stock firmware with flashtool (select all under wipe)
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
The issue is not actually the "stuck on SONY logo". The issue is that the computer wont recognize the phone when I connect through USB.
What did you use to get the correct driver?
Ok I actually managed to get it connected on my Windows 7 PC.
I installed Emma (Flashtool) and it installed something but I'm not sure really what happened to be honest. Light on the phone was green and it installed 4.0.4 ICS.
It was a success after about 217 seconds but after that the phone didn't do anything. Stayed with green light and when I disconnected it it could not be started at all.
Maybe it doesn't have enough power to start up. It is on 220V charge now so lets see what will happen with it.
Bergaliden said:
The issue is not actually the "stuck on SONY logo". The issue is that the computer wont recognize the phone when I connect through USB.
What did you use to get the correct driver?
Click to expand...
Click to collapse
I just installed pc companion
Sent from my LT26i using xda app-developers app
Good news y'all.
All it needed after using Emma was some juice. Now it is back to it's normal self. And I'm not going to ROM it anymore. Soon JB will be officially out for XS.
True!! When I was a noob, I tried to flash cyanogrnmod on my galaxy ace (it was a year ago) and I stuck in bootloop. Idk what to do and I regret it, from that day I never flash any rom. But this year I flash xzxperience on acro s and it works but not so happy and then I flash stock firmware to normal. And I regret because i ve unlocked bootloader!! And now BE is not working anymore.
Sent from my LT26w using xda premium
So by the heading you guys must know I have messed up pretty badly.
Let me tell you first, I have done my research. Tried each and every thing possible (AFAIK) but it just wont boot into recovery.
FLASHBACK: ( I have Sff) (Volume button is broken).
1) Did a clean wipe ( Cache, Dalvik, System),
2) Installed Ignorance V4, ( I thought the kernel must be in the zip, so didnt flash the kernel)
3) Phone booted and stuck in splashscreen. ( Ignorance)
4) Connected it to Laptop via USB. Checked ADB. Device not found.
5) Switched off device, connected to laptop, checked ADB, Device not found.
6) Checked through device manager, and device manager recognizes the phone. All drivers are installed and updated. Windows Vista.
Now, what to do? Is there any way I can get into recovery or even Hboot so that I can flash kernel?.
Need help
Owner of a messed up V.
Vickrant.
myhtconeV said:
So by the heading you guys must know I have messed up pretty badly.
Let me tell you first, I have done my research. Tried each and every thing possible (AFAIK) but it just wont boot into recovery.
FLASHBACK: ( I have Sff) (Volume button is broken).
1) Did a clean wipe ( Cache, Dalvik, System),
2) Installed Ignorance V4, ( I thought the kernel must be in the zip, so didnt flash the kernel)
3) Phone booted and stuck in splashscreen. ( Ignorance)
4) Connected it to Laptop via USB. Checked ADB. Device not found.
5) Switched off device, connected to laptop, checked ADB, Device not found.
6) Checked through device manager, and device manager recognizes the phone. All drivers are installed and updated. Windows Vista.
Now, what to do? Is there any way I can get into recovery or even Hboot so that I can flash kernel?.
Need help
Owner of a messed up V.
Vickrant.
Click to expand...
Click to collapse
Which recovery u have ??
If you have Cwm...Let ua battery drain completely and then put in on charge, it will boot into cwm directly. That's the only option.
If you have TWRP, lol..I'd Suggest you torepair your Vol Buttons
red de0392 said:
Which recovery u have ??
If you have Cwm...Let ua battery drain completely and then put in on charge, it will boot into cwm directly. That's the only option.
If you have TWRP, lol..I'd Suggest you torepair your Vol Buttons
Click to expand...
Click to collapse
Thanks for replying ya
Unfortunately I have TWRP. So my one v is going for repairs :crying::crying:. Still not given up...trying it on my other lappy, lets see if adb picks it up there.
myhtconeV said:
Thanks for replying ya
Unfortunately I have TWRP. So my one v is going for repairs :crying::crying:. Still not given up...trying it on my other lappy, lets see if adb picks it up there.
Click to expand...
Click to collapse
Don't Sweat too Much Mate. It Won't boot into recovery.
Well My Vol Buttons are Dying As well...Will flash CWM Now
We should Learn from other
red de0392 said:
Don't Sweat too Much Mate. It Won't boot into recovery.
Well My Vol Buttons are Dying As well...Will flash CWM Now
We should Learn from other
Click to expand...
Click to collapse
:good: what if i try that with mine?
Downloading HTC Sync Manager. Hope the updated drivers work. Called up my IT guy. He is giving me a quote on repairs tomorrow. Come to think of it, my one v was bound to end like this. Screen broken and shattered at 2 places, headphone jack socket gone, volume buttons gone.
Now upgrading to...........................wait for it............................ Nokia 1100.
myhtconeV said:
:good: what if i try that with mine?
Downloading HTC Sync Manager. Hope the updated drivers work. Called up my IT guy. He is giving me a quote on repairs tomorrow. Come to think of it, my one v was bound to end like this. Screen broken and shattered at 2 places, headphone jack socket gone, volume buttons gone.
Now upgrading to...........................wait for it............................ Nokia 1100.
Click to expand...
Click to collapse
Hahahah...That's a Beast
myhtconeV said:
So by the heading you guys must know I have messed up pretty badly.
Let me tell you first, I have done my research. Tried each and every thing possible (AFAIK) but it just wont boot into recovery.
FLASHBACK: ( I have Sff) (Volume button is broken).
1) Did a clean wipe ( Cache, Dalvik, System),
2) Installed Ignorance V4, ( I thought the kernel must be in the zip, so didnt flash the kernel)
3) Phone booted and stuck in splashscreen. ( Ignorance)
4) Connected it to Laptop via USB. Checked ADB. Device not found.
5) Switched off device, connected to laptop, checked ADB, Device not found.
6) Checked through device manager, and device manager recognizes the phone. All drivers are installed and updated. Windows Vista.
Now, what to do? Is there any way I can get into recovery or even Hboot so that I can flash kernel?.
Need help
Owner of a messed up V.
Vickrant.
Click to expand...
Click to collapse
Recently I have seen one interesting issue that might appear like solution to your problem. According to the description you may try turning off your phone and plugging in a charger. If you will have the same behaviour your phone should start into recovery mode. =)
Edited: Doh! TWRP...
You may try All-In-One-Kit as well. It has high level interface to run adb commands (including Boot into Recovery). Yeah yeah, I've seen your note that adb does not recognize your device, anyway...
Stupid answer from me....... Op are both your volume buttons broken?
Sent from my Nexus 7 using Tapatalk
heavy_metal_man said:
Stupid answer from me....... Op are both your volume buttons broken?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yes.
I have given it for repairs.I have decided not to sell or dispose it.
Its only sometime before I buy a moto g or xperia device. Waiting for my new credit card :fingers-crossed:
which phone would you suggest?
Vickrant.
If you are good with 16gb storage better buy Moto G if not there are a few options like Xperia M , Canvas series and all..
Sorry to be so late to the party, but in case other people get this issue. ADB will often work just after the kernel finishes loading, before it gets shut off. So between the htc boot screen and when the boot anim starts you have a window to commit abd commands. I often use this to save time when flashing kernels etc, notably because my WIP roms rarely make it past bootanim!
red de0392 said:
Which recovery u have ??
If you have Cwm...Let ua battery drain completely and then put in on charge, it will boot into cwm directly. That's the only option.
If you have TWRP, lol..I'd Suggest you torepair your Vol Buttons
Click to expand...
Click to collapse
You sure about this?i am stuck there and i have cwm recovery installed,will it switch itself straight to recovery after the battery is dried up?i am using sony xperia c
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip