Develop Bugs

Help Needed Please , Urgent

Hello ,
i have tried to flash CWM (file founded in this section)
After reboot , i have this message
Enter the fastboot ..
enter the fastboot..
Long time no see!
And the phone stuck at LG Logo , i tried to reboot many time its stuck at this .
also i can't go to download mode !!! is my phone Breaked ??
Please Help Me !!

EDIT
now i can go to download mode , i start Upgrading KDZ file , hope this gonna work .
I will keep you in touch
-- Edit
That's work , i ve use the same way to unbrick LG Nitro and it's worked for me , of course ive used Img and boot file of LU6200
Thanks again Xda

Good job fixing it! And you did it all before anyone else could reply. haha

AllstarE4 said:
Good job fixing it! And you did it all before anyone else could reply. haha
Click to expand...
Click to collapse
Hehe yeah, sometimes you just need the feeling that someone is there. :laugh:
Congrat's aymen_ben_ammar for getting your phone back out the black zone.

[Q] Is my phone bricked or could it be saved ?

I flashed a rom to my device from needrom website. It was a custom rom based on the latest test version b116 with samsung s4 UI. After the device rebooted itself the vibration started and never stopped since then. .The phone booted but screen is used upside down I mean for the button at the bottom you need to touch at the top of the screen etc. I tried updating with official b111 using sdcard but it doesnt work. The recovery starts but it fails everytime ı try it. I just bought the phone 3 days ago and now ı can not use it anymore it is very annoying. Can anyone please help me ??

semihgumusay said:
I flashed a rom to my device from needrom website. It was a custom rom based on the latest test version b116 with samsung s4 UI. After the device rebooted itself the vibration started and never stopped since then. .The phone booted but screen is used upside down I mean for the button at the bottom you need to touch at the top of the screen etc. I tried updating with official b111 using sdcard but it doesnt work. The recovery starts but it fails everytime ı try it. I just bought the phone 3 days ago and now ı can not use it anymore it is very annoying. Can anyone please help me ??
Click to expand...
Click to collapse
I cnt get u people u are messin with your phones .. u ar crazy .. what the hell u want some crappy s4 rom ? so go and buy galaxy s4 then .. ?
jesus ..

GalaxySIIII said:
I cnt get u people u are messin with your phones .. u ar crazy .. what the hell u want some crappy s4 rom ? so go and buy galaxy s4 then .. ?
jesus ..
Click to expand...
Click to collapse
It is not a s4 rom. ıt is just a customized rom based on original p6 rom. ıf you can not help me please do not "mess up" the forum. ı am lookin for someone who can help me !!!

If the ROM is based on B116, try putting the official B116 firmware on your SD-card (via another phone, flashcard reader, whatever) and try reflashing the phone that way. Reflashing obviously done by holding volume UP + DOWN keys pressed, turning the phone on while keeping UP and DOWN pressed, and letting the phone force-flash that firmware.
Let me know if it helped.

semihgumusay said:
It is not a s4 rom. ıt is just a customized rom based on original p6 rom. ıf you can not help me please do not "mess up" the forum. ı am lookin for someone who can help me !!!
Click to expand...
Click to collapse
am not messing up nothing .. u messed up your phone .. why u not just satisfied what u got ..
do u have recovery in the phone ? u need to copy official rom and flash it via cwm ..

right now ı am downloading b116 but i think it will take more than 2 hours maybe because of the overload on the server it is being downloaded. ı was gonna try that but ı am not sure if it works but ı will try. unfortunately I don't have cwm installed on the device. and in the recovery mode ı can not do anything with the buttons

btw thank you so much Bakpoeder for you help. ı will definitely let u know about if it works . now ı am waiting for the download to be finished. and the problem ı faced while trying to update with a lower version is that even though ı put the update package into dload folder in sdcard it says no update package is it possible if the device can not read the sdcard ?

semihgumusay said:
btw thank you so much Bakpoeder for you help. ı will definitely let u know about if it works . now ı am waiting for the download to be finished. and the problem ı faced while trying to update with a lower version is that even though ı put the update package into dload folder in sdcard it says no update package is it possible if the device can not read the sdcard ?
Click to expand...
Click to collapse
if u doing it via recovery u need zip file i suppose .

Thank u guys for ur help. ı think ı will try to flash/update it tomorrow because the download speed is very slow. ı will let u know if any of these method works. btw if there is anyone with a different idea ı would appreciate it. ıf none of these method work ı think ı will have to go to service center

ı have a big problem now
ı tried to apply update from sdcard but the phone doesn't recognize the sdcard. and now ı have another problem ı can not recharge the battery ı will go to service center hopefully they fix the device

Same Problem
Hi there what hapend with your P6 mate??
i have the same prob here.. i try to put new firmware and at 50% of updating the phone shutdown and now when i turn it on just only vibrates all the time and the touchscreen doesn't works only the side buttons
i tryied to install new firmware ( P6_firmware(P6-U06,Android_4.2,Emtion_UI,V100R001C00B111,Nornal,05011RJP) but when i press update from sd card i cant see what inside...
anyone help?

Absolut22 said:
Hi there what hapend with your P6 mate??
i have the same prob here.. i try to put new firmware and at 50% of updating the phone shutdown and now when i turn it on just only vibrates all the time and the touchscreen doesn't works only the side buttons
i tryied to install new firmware ( P6_firmware(P6-U06,Android_4.2,Emtion_UI,V100R001C00B111,Nornal,05011RJP) but when i press update from sd card i cant see what inside...
anyone help?
Click to expand...
Click to collapse
You should send it to the service center. I tried everything but ı couldn't fix it. Now the device is in the service cervice it's been couple of days and still waiting. I hope the warranty covers it :crying:

sames its happen to me ! but its the recovery has been deleted for me !

[Q]problem with charging after trying to update version

A few days ago i tried to update my htc one x version to the new one ..
apparently something went wrong after i got to the last part where you need to reboot your phone after you did everything you need (delete the cache and some other things i don't remember) it started to reboot every time .
i found something that i think can fix it that is called jbwflasher , it makes all the steps and its very easy , also it works something that didn't happened before (by works i mean that it shows the gray htc logo and it asks me if i wanna unlock the htc something that didn't happened before)
Now , the problem is that in the jbwflasher there is a part where it needs to copy some files into the phone , but theres a problem , theres not inuff battery and also the phone dosent charge i dont know why .
another detail , i cant accses the files in the phone memory , i dont have back up(it doesnt work i dont know why) and i dont know what to do ..
please help me :crying:

gaston1800 said:
A few days ago i tried to update my htc one x version to the new one ..
apparently something went wrong after i got to the last part where you need to reboot your phone after you did everything you need (delete the cache and some other things i don't remember) it started to reboot every time .
i found something that i think can fix it that is called jbwflasher , it makes all the steps and its very easy , also it works something that didn't happened before (by works i mean that it shows the gray htc logo and it asks me if i wanna unlock the htc something that didn't happened before)
Now , the problem is that in the jbwflasher there is a part where it needs to copy some files into the phone , but theres a problem , theres not inuff battery and also the phone dosent charge i dont know why .
another detail , i cant accses the files in the phone memory , i dont have back up(it doesnt work i dont know why) and i dont know what to do ..
please help me :crying:
Click to expand...
Click to collapse
1 download this fastboot with ONEXCHARGE.bat go in fastboot with Volume down + Power button and connect the phone to computer start file ChargeONEX.bat the phone will start to restart a lot of times leave it for 3-4 hours to charge.
2 Go to http://htcdev.com and unlock your bootloader(you must to register) after this flash this recovery and go in fastboot connect the phone again and use command fastboot flash recovery recovery.img and mount the sd card
3 Install custom rom or stock it is your decision.

thx
Tnx A lot man i will try it !

it doesnt charge
Bro it doesnt charge the phone ..
i left it like 6 hours and it was rebooting all the time and the battery is still low what should i do ??

You have to wait and let it reboot still in charge.
After few times, message "battery too low..." will dissapear then you'll be able to unlock phone and install recovery.
You'll have to be fast in doing that.
Had this pb too, was near the good "less charge" and had to wait a lot (for only some mA missing).
At each reboot, you can read the mA amount, it must grow little by little.
Good luck
Franky
---------- Post added at 11:54 AM ---------- Previous post was at 11:49 AM ----------
THIS
http://forum.xda-developers.com/showpost.php?p=25586660&postcount=36
worked for me.

...
It reaches to 3568mv ..
how much do i need for it to work ?
if it is how much i need then it still says low battery when i try to unlock it ..

gaston1800 said:
It reaches to 3568mv ..
how much do i need for it to work ?
if it is how much i need then it still says low battery when i try to unlock it ..
Click to expand...
Click to collapse
As said to the link I gave you
...you will have enough power(~3.68mv) to unlock it...
You're near the good value, but takes time...

gaston1800 said:
It reaches to 3568mv ..
how much do i need for it to work ?
if it is how much i need then it still says low battery when i try to unlock it ..
Click to expand...
Click to collapse
Are everything is OK now. Must to wait long time to charge in this way. This evening try to do the rest of the things. If you unlock and flash recovery you can put the phone in recovery and charge to full, but only if you unlock and flash this recovery where I give you in my post.

Tnx !
fgth90 said:
As said to the link I gave you
...you will have enough power(~3.68mv) to unlock it...
You're near the good value, but takes time...
Click to expand...
Click to collapse
Thanks a lot man i hope it will work

tnx
Thant said:
Are everything is OK now. Must to wait long time to charge in this way. This evening try to do the rest of the things. If you unlock and flash recovery you can put the phone in recovery and charge to full, but only if you unlock and flash this recovery where I give you in my post.
Click to expand...
Click to collapse
ok bro tnx alot !!
but the keyboard in the phone doesnt work ?
what can i do ?
i installed google apps.

tnx!
fgth90 said:
As said to the link I gave you
...you will have enough power(~3.68mv) to unlock it...
You're near the good value, but takes time...
Click to expand...
Click to collapse
ok bro tnx alot !!
but the keyboard in the phone doesnt work ?
what can i do ?
i installed google apps.
and another things , i can see the bootloader screen in the background , its barely visible but its annoying.
and the home button doesnt work

gaston1800 said:
ok bro tnx alot !!
but the keyboard in the phone doesnt work ?
what can i do ?
i installed google apps.
and another things , i can see the bootloader screen in the background , its barely visible but its annoying.
and the home button doesnt work
Click to expand...
Click to collapse
What rom you installed?

nvm
Thant said:
What rom you installed?
Click to expand...
Click to collapse
Never mind , i fixed it .
but now my phone doesnt charge when its on , i can only charge it when its off ..

gaston1800 said:
Never mind , i fixed it .
but now my phone doesnt charge when its on , i can only charge it when its off ..
Click to expand...
Click to collapse
This is really strange

Thant said:
This is really strange
Click to expand...
Click to collapse
so what should i do ?

gaston1800 said:
so what should i do ?
Click to expand...
Click to collapse
What rom you install????? Try erase cashe (fastboot erase cache) and wipe dalvik cache and battery stats from recovery if nothing help. Try change the rom.

Thant said:
What rom you install????? Try erase cashe (fastboot erase cache) and wipe dalvik cache and battery stats from recovery if nothing help. Try change the rom.
Click to expand...
Click to collapse
now im installing cm RC2 something like that

gaston1800 said:
now im installing cm RC2 something like that
Click to expand...
Click to collapse
I not working with this try sense rom Viper or ARHD or something else

Soft Bricked Xolo Q1000 after flashing with SP Flash tool

My phone refuses to boot after I flashed stock Rom through SP Flash Tool. I didn't get any error during flashing. but as soon as I powered on the device I could see nothing but a black screen with hazy lines, after few seconds or so phone is getting restart.
I have tried different Roms and versions of SP Flash tool but with no success.
Tried both Roms from: http://www.needrom.com/download/xolo-q1000
Please help!

gladiator9120 said:
i m facing the same carbon copy issue, please let me know if u find any solution for this.
Click to expand...
Click to collapse
Yes, I got it fixed now. Used the SP Flash Tool v3.1316.0.150 and Rom downloaded from http://www.needrom.com/download/xolo-q1000
In the link given above there are two roms available. first try to flash First(file name: XOLO-Q1000_FlashTool) rom. If still your phone doesn't bootup, you might need to first flash the Second rom(file name: Xolo Q1000 M001 25-09-2013), then after flash certain parts(I unchecked, PRELOADER and ANDROID before flashing it) from the First rom.

gladiator9120 said:
you are a life savior man, finally i saw the home screen, just one small problem i have now, that all IMEI no. are gone and so my sim is not being detected, am currently searching the net for the same, but if you have any idea please guide me. . .
And THANK YOU SOOOOOOOOOOOOO MUCH. . . .
Click to expand...
Click to collapse
Yes, I faced the same problem and eventually got it fixed too.
If you've backed up your IMEI numbers via Mobile Uncle app, you can easily get it back by simply restoring the backup file from the mobile uncle app. Otherwise, you need to push your IMEI manually.
Go to mobile uncle -> Engineer Mode -> Engineer Mode (MTK) -> slide right to Connectivity tab -> select CDS information -> Radio Information -> Phone 1
There you'll find a text field pre-filled with "A+", type AT+EGMR=1,7,"<FIRST_IMEI_NO>" without the angular brackets
Press the "SEND AT COMMAND" button. You'll get a toast message. Restart the phone and if IMEI is restored for phone 1, repeat the process for Phone 2 as well... This time select AT+EGMR=1,10,"<SECOND_IMEI_NO>".
As a precaution for next time, take a backup of the IMEI
You can get IMEI numbers from back panel after removing the battery.

Also, after flashing I couldn't get to Stock recovery and unable to flash it by Mobile Uncle. Then, I had to flash custom recovery(CWM) by the same SP Flash Tool.
As of now, everything is just working fine.

I m using q1000 only ....i was using different rom developed by ramrazj.
But; before some daes i flashed new rom ..n that got some conflict and it was restarting continually . than i tried to flash stock rom by using sp flash tool but my phone doesn't accepting fastboot mode command.
So i have flashed now one stock modified rom.
N during that conflict ; right now my phone is not detecting sim card..
I m tired now crying ......plzzz need big help from all you developers.

Ty for solution .
I tried this process but when i m sending .it is showing At command is failed to sand.
Plzzzz.... Give other solution according to u .
Thank you so much.

try these methods
dhairya. said:
Ty for solution .
I tried this process but when i m sending .it is showing At command is failed to sand.
Plzzzz.... Give other solution according to u .
Thank you so much.
Click to expand...
Click to collapse
I had the same problem but I realized that I insered the sim upside down..
Check if u Insered correctly And check your simcard on othermobile to check if the simcard working correcty
Try to install remzeej rom
http://forum.xda-developers.com/xol...nofficial-cherry-mobile-omega-hd-2-0-t3048883
Using sp flash tools.. And dont try to install any custom recovery after that
---------- Post added at 04:26 PM ---------- Previous post was at 04:14 PM ----------
dhairya. said:
Ty for solution .
I tried this process but when i m sending .it is showing At command is failed to sand.
Plzzzz.... Give other solution according to u .
Thank you so much.
Click to expand...
Click to collapse
Advance methods
http://forum.xda-developers.com/xolo-q1000/help/flashing-stock-rom-sp-flash-tool-sim-t2932733
Just check that

dhairya. said:
Ty for solution .
I tried this process but when i m sending .it is showing At command is failed to sand.
Plzzzz.... Give other solution according to u .
Thank you so much.
Click to expand...
Click to collapse
No it is actually neither of those problems. You only have to do one thing, when you type put a space between at and +
eg: - in line ""AT +EGMR=1,7,"IMEI_1" YOU MUST ENTER SPACE BETWEEN AT and +, so not AT+EG... but AT +EG.
I just now did this and fixed my IMEI got it working

My xolo Q1000 is not botting to any mode n not even showning any sort of light.......plz help me to fix it

Subhanku said:
My xolo Q1000 is not botting to any mode n not even showning any sort of light.......plz help me to fix it
Click to expand...
Click to collapse
Try Connecting it to your PC. Let me know if it Shows any kind of activities.
Check if SP flash tool is detecting your phone or not.
If it is still Detected by Flash tool, you have a chance of Recovering it. Otherwise, The phone is Hard bricked.
Most Probably Their are less chances Hard brick and you can recover it back.
Let me know if you see some results.

1.29.401.5 update problem

does anyone in Europe got the 1.29.401.5 update ?
i have a problem .. i've downloaded the update like 10 time .. every single time the update starts .. my phone boots to the recovery .. and suddenly a red triangle appears and the phone restarts after 10 seconds.. any solution ?
my phone is htc desire 820 single sim .. and my software number is 1.21.401.1
plz help

Do you have the original recovery? I managed to install this update without any problems.

yup.. i have the original one...
deadpolska said:
Do you have the original recovery? I managed to install this update without any problems.
Click to expand...
Click to collapse
the problem is .. when i bought the device it had a heating issue ... so i took it back and they told me that its a software prob! :/
maybe they changed something .. idk .. any ideas what can i do to get this update .. coz when lollipop comes ,, i dont want to get stuck again ! :/