Related
Hi my Wave s8500 hang on the bada logo when start..It has been flashed using jtag because previously it had a dead boot problem. Now, I am again able to install firmwares successfully using multiloader but the phone freezed on the bada logo while booting. Please can somebody help...
try other firmware
hello
what's your firmware version and csc you try to install ?
Hello
I have tried several firmwares...It still hang at bada logo..This problem arise only after the phone has been repaired using jtag. The phone went into dead boot after I once trying to update the firmware(read my introduction above). A technician managed to revived the phone but now it boot and hang at the bada logo despite trying several firmwares(1.0,1.2,2.0)..Can any expert please help me out?Thanks in advance.
Strange.
Maybe it is the same problem than here?
Check if you don't forget something.
You can try to pull battery out too, sometimes it helps.
Nothing happens. I have tried
Do you have a riff box?
No I dnt have..I am no technician dude.
Did you save your NAND image before overwriting?
No..I just flashed.
Did you manage to fix your device ?
If you haven't any other alternative you can try the Unbrickable mod.
But before doing this you should be sure that you can't do anything else because you may definitely kill your device. So wait a bit.
As you are able to get the boot logo it should be fixable in some way.
If someone see what goes wrong the problem...
rey2012 said:
Hi my Wave s8500 hang on the bada logo when start..It has been flashed using jtag because previously it had a dead boot problem. Now, I am again able to install firmwares successfully using multiloader but the phone freezed on the bada logo while booting. Please can somebody help...
Click to expand...
Click to collapse
hi, few days back , i was also facing such problems, don't worry its curable ,
try latest Multiloader v5.67 , (dont try older versions)
download Multiloader v5.67 from here http://www.mediafire.com/?s59s0xq99uj5bq7
dont flash boot file and other file from firmware at same time, step by step process is given here http://forum.xda-developers.com/showthread.php?t=1661002
hope it can help you out, it worked for me, hope works for you too.....
TC
Always do good things in this world.....JMK...
Hello
The multiloader 5.7 interface is not correct..Please check
you need JTAG boot again but with riff box becuse JTAG ORT-BOx OR other give that problem ... this was happen to me and i fix my phone With RIFF
Sorry
Thanks for ur advice. I dnt have this equipment. The phone still have this problem. I need to show it to a professional which is very rare here.
I flashed a rom to my device from needrom website. It was a custom rom based on the latest test version b116 with samsung s4 UI. After the device rebooted itself the vibration started and never stopped since then. .The phone booted but screen is used upside down I mean for the button at the bottom you need to touch at the top of the screen etc. I tried updating with official b111 using sdcard but it doesnt work. The recovery starts but it fails everytime ı try it. I just bought the phone 3 days ago and now ı can not use it anymore it is very annoying. Can anyone please help me ??
semihgumusay said:
I flashed a rom to my device from needrom website. It was a custom rom based on the latest test version b116 with samsung s4 UI. After the device rebooted itself the vibration started and never stopped since then. .The phone booted but screen is used upside down I mean for the button at the bottom you need to touch at the top of the screen etc. I tried updating with official b111 using sdcard but it doesnt work. The recovery starts but it fails everytime ı try it. I just bought the phone 3 days ago and now ı can not use it anymore it is very annoying. Can anyone please help me ??
Click to expand...
Click to collapse
I cnt get u people u are messin with your phones .. u ar crazy .. what the hell u want some crappy s4 rom ? so go and buy galaxy s4 then .. ?
jesus ..
GalaxySIIII said:
I cnt get u people u are messin with your phones .. u ar crazy .. what the hell u want some crappy s4 rom ? so go and buy galaxy s4 then .. ?
jesus ..
Click to expand...
Click to collapse
It is not a s4 rom. ıt is just a customized rom based on original p6 rom. ıf you can not help me please do not "mess up" the forum. ı am lookin for someone who can help me !!!
If the ROM is based on B116, try putting the official B116 firmware on your SD-card (via another phone, flashcard reader, whatever) and try reflashing the phone that way. Reflashing obviously done by holding volume UP + DOWN keys pressed, turning the phone on while keeping UP and DOWN pressed, and letting the phone force-flash that firmware.
Let me know if it helped.
semihgumusay said:
It is not a s4 rom. ıt is just a customized rom based on original p6 rom. ıf you can not help me please do not "mess up" the forum. ı am lookin for someone who can help me !!!
Click to expand...
Click to collapse
am not messing up nothing .. u messed up your phone .. why u not just satisfied what u got ..
do u have recovery in the phone ? u need to copy official rom and flash it via cwm ..
right now ı am downloading b116 but i think it will take more than 2 hours maybe because of the overload on the server it is being downloaded. ı was gonna try that but ı am not sure if it works but ı will try. unfortunately I don't have cwm installed on the device. and in the recovery mode ı can not do anything with the buttons
btw thank you so much Bakpoeder for you help. ı will definitely let u know about if it works . now ı am waiting for the download to be finished. and the problem ı faced while trying to update with a lower version is that even though ı put the update package into dload folder in sdcard it says no update package is it possible if the device can not read the sdcard ?
semihgumusay said:
btw thank you so much Bakpoeder for you help. ı will definitely let u know about if it works . now ı am waiting for the download to be finished. and the problem ı faced while trying to update with a lower version is that even though ı put the update package into dload folder in sdcard it says no update package is it possible if the device can not read the sdcard ?
Click to expand...
Click to collapse
if u doing it via recovery u need zip file i suppose .
Thank u guys for ur help. ı think ı will try to flash/update it tomorrow because the download speed is very slow. ı will let u know if any of these method works. btw if there is anyone with a different idea ı would appreciate it. ıf none of these method work ı think ı will have to go to service center
ı have a big problem now
ı tried to apply update from sdcard but the phone doesn't recognize the sdcard. and now ı have another problem ı can not recharge the battery ı will go to service center hopefully they fix the device
Same Problem
Hi there what hapend with your P6 mate??
i have the same prob here.. i try to put new firmware and at 50% of updating the phone shutdown and now when i turn it on just only vibrates all the time and the touchscreen doesn't works only the side buttons
i tryied to install new firmware ( P6_firmware(P6-U06,Android_4.2,Emtion_UI,V100R001C00B111,Nornal,05011RJP) but when i press update from sd card i cant see what inside...
anyone help?
Absolut22 said:
Hi there what hapend with your P6 mate??
i have the same prob here.. i try to put new firmware and at 50% of updating the phone shutdown and now when i turn it on just only vibrates all the time and the touchscreen doesn't works only the side buttons
i tryied to install new firmware ( P6_firmware(P6-U06,Android_4.2,Emtion_UI,V100R001C00B111,Nornal,05011RJP) but when i press update from sd card i cant see what inside...
anyone help?
Click to expand...
Click to collapse
You should send it to the service center. I tried everything but ı couldn't fix it. Now the device is in the service cervice it's been couple of days and still waiting. I hope the warranty covers it :crying:
sames its happen to me ! but its the recovery has been deleted for me !
Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Explain here... You'll get your phone unbricked. Never say die
Sent from my P6-U00 using XDA Premium HD app
PulseDroid said:
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Click to expand...
Click to collapse
Well , I was trying to flash the CleanRom project , I'have made a post about that to ,
The Instructions were wery clear to me i followed them exactly how it was writen in tutorial.
I have an international verzion of P6 and according to that turorial , ( http://forum.xda-developers.com/showthread.php?t=2625680 )
in order to flash that room i moust firstly flash an Chineze verzion which comes with unlocked bootloader , then i did that
I downloaded the rom put it on phone flashed via setteings update software , then everything went fine the process it seelf showd me
completed 100% and in the end sayd OK , then my phone turned off, and it's never been on eversince :A
As of now the phone is totally dead black screen , I've tryed everything it doesent go in any mode
When i plug in the power cord it only shows a red light indicator.
I belive this is a Hard Brick , not soft brick .
Warranty? Did the same to mine got I repared for free...
jagwar1 said:
Warranty? Did the same to mine got I repared for free...
Click to expand...
Click to collapse
nope , no warranty
Nexhmedin said:
nope , no warranty
Click to expand...
Click to collapse
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
rupro327 said:
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
Click to expand...
Click to collapse
Yes i did brick my P6 and nope I aint gona tell them Im a noob :A
The thing here is to get help in here is not about send it back to china so if you have any other idea , your welcome to share.
I have no warranty , even if it had this phone is buyed in china , and traveled to the otherside of the world :it would cost as mouch as the phone itseelf to send it back to service.
Try flashing the latest TWRP, it has off mode charging. Can you put your phone in fastboot mode via adb ?
Not Hard Brick!
Happened to me before and guess what? Tried very simple thing - and it worked.
Take your sdCard out of the phone.
Replace the dload folder with the extraction from either the B111 from the Huawei site or the B125 from here on xda
Reinsert card and press all buttons down till phone goes into internal recovery.
Your main problem will be having enough battery to get you twenty minutes.
If your red light is functioning, you probably haven't blown your motherboard.
Sent from my LG-D802 using XDA Premium HD app
Nexhmedin said:
Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
Click to expand...
Click to collapse
you device boot an loop in huawei screen.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Nexhmedin said:
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Click to expand...
Click to collapse
Only solution for that is to take your phone to local service. I am talking from experience.
Sent from my ME371MG using xda app-developers app
Can you check if you plug it into you computer that your computer connects to it or makes a sound? That can probably prove that the motherboard is fine and maybe your LCD is broken or has loose connection.
Happened to me before. Black screen, only red led, nothing else working. It happened that I got scammed by a seller.
What I ended up doing was taking apart the phone and I found that the LCD connection was loose. Fixed that, then I saw that the phone wouldn't boot. Loaded B111, B118, nothing worked. I then got B125, and it miraculously worked.
You could try what I did, but it is quite risky and I was very lucky.
I have to agree with goce. Unless you are experienced and willing to mess around with things, you should go find local service.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
What can I do on my phone just flashes the red light and include only the logo of huawei.
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
gurvinder76 said:
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
Click to expand...
Click to collapse
I think you should download the TWRP recovery for jelly bean from surdu and flash it from bootloader. If you are on the international this is the method for unlocking bootloader:
http://forum.xda-developers.com/showthread.php?t=2666116
Flash a custom rom next
Sent from my P6-U06 using XDA Premium 4 mobile app
hi everyone
i have htc one x with android revolution hd
the phone is rooted
the phone worked fine
but now i have a big probleme : the phone turn off randomly without any error massages or something
even when i dont use my phone
I found in Somme thread that I should back to stock rom actually I did it but after 1 day I have the same problem he still turning off without any reason
The crazy thing is when I boot to bootloader (safe mode) the phone dosn't turn off I have no problem in sefe mode he still on
But when go to recovery or to boot into the system the phone after 10mints turn off automatically no reason
The question is that problem is a software problem or hardware? ??
I really need help
sorry for my baaad english
thank you in advance
Hi,
This thread is being moved to your own dedicated forum , where the experts may be able to help you better.
Good luck!
Taha.ineflass said:
hi everyone
i have htc one x with android revolution hd
the phone is rooted
the phone worked fine
but now i have a big probleme : the phone turn off randomly without any error massages or something
even when i dont use my phone
I found in Somme thread that I should back to stock rom actually I did it but after 1 day I have the same problem he still turning off without any reason
The crazy thing is when I boot to bootloader (safe mode) the phone dosn't turn off I have no problem in sefe mode he still on
But when go to recovery or to boot into the system the phone after 10mints turn off automatically no reason
The question is that problem is a software problem or hardware? ??
I really need help
sorry for my baaad english
thank you in advance
Click to expand...
Click to collapse
Try changing rom and deleting some app.I think there is a app that is causing it
Noobdead said:
Try changing rom and deleting some app.I think there is a app that is causing it
Click to expand...
Click to collapse
hi
thank you for reply
yesterday I install cm11
but after few minutes the phone turn off
Hi Everyone , I need help to bring up Cardinal Aosp and few other roms for Gx8 . Since i dint own a Gx8 its quite harder to maintain a build . After request from my friend , am here with a test build . Though this is a test build it will not brick or doesnt harm your device in what so ever manner .
SO ,Here is the Build .
This may or may not boot as i dint tested [as mentioned above i dint own a gx8] .
If it boots and if found some bug , comeup with appropriate logs so that we can raise multiple roms back to back in development section .
i can help in whatever way you'd need.
redbeard1083 said:
i can help in whatever way you'd need.
Click to expand...
Click to collapse
Yeah , I need someone to test this build before I make a thread . have u tried flashing this one ?
gopinaidu77 said:
Yeah , I need someone to test this build before I make a thread . have u tried flashing this one ?
Click to expand...
Click to collapse
okay so i tried to test it out , flashed it and then reboot i got stuck at the huaewi logo screen , then i tried flashing a brand new boot.img and still got the same result , i wiped every single partion and tried to install it too. still never got past the boot screen , i am using a rio-l01 (dual sim ) middle east version , ill keep trying to find whats going on so i can finally boot it
Twig.hat said:
okay so i tried to test it out , flashed it and then reboot i got stuck at the huaewi logo screen , then i tried flashing a brand new boot.img and still got the same result , i wiped every single partion and tried to install it too. still never got past the boot screen , i am using a rio-l01 (dual sim ) middle east version , ill keep trying to find whats going on so i can finally boot it
Click to expand...
Click to collapse
Thanks , we will have a new build by the end of the day .
Yey , can't wait to try it