Samsung Wave S8500 hang on bada logo - Bada Software and Hacking General

Hi my Wave s8500 hang on the bada logo when start..It has been flashed using jtag because previously it had a dead boot problem. Now, I am again able to install firmwares successfully using multiloader but the phone freezed on the bada logo while booting. Please can somebody help...

try other firmware

hello
what's your firmware version and csc you try to install ?

Hello
I have tried several firmwares...It still hang at bada logo..This problem arise only after the phone has been repaired using jtag. The phone went into dead boot after I once trying to update the firmware(read my introduction above). A technician managed to revived the phone but now it boot and hang at the bada logo despite trying several firmwares(1.0,1.2,2.0)..Can any expert please help me out?Thanks in advance.

Strange.
Maybe it is the same problem than here?
Check if you don't forget something.
You can try to pull battery out too, sometimes it helps.

Nothing happens. I have tried

Do you have a riff box?

No I dnt have..I am no technician dude.

Did you save your NAND image before overwriting?

No..I just flashed.

Did you manage to fix your device ?
If you haven't any other alternative you can try the Unbrickable mod.
But before doing this you should be sure that you can't do anything else because you may definitely kill your device. So wait a bit.
As you are able to get the boot logo it should be fixable in some way.
If someone see what goes wrong the problem...

rey2012 said:
Hi my Wave s8500 hang on the bada logo when start..It has been flashed using jtag because previously it had a dead boot problem. Now, I am again able to install firmwares successfully using multiloader but the phone freezed on the bada logo while booting. Please can somebody help...
Click to expand...
Click to collapse
hi, few days back , i was also facing such problems, don't worry its curable ,
try latest Multiloader v5.67 , (dont try older versions)
download Multiloader v5.67 from here http://www.mediafire.com/?s59s0xq99uj5bq7
dont flash boot file and other file from firmware at same time, step by step process is given here http://forum.xda-developers.com/showthread.php?t=1661002
hope it can help you out, it worked for me, hope works for you too.....
TC
Always do good things in this world.....JMK...

Hello
The multiloader 5.7 interface is not correct..Please check

you need JTAG boot again but with riff box becuse JTAG ORT-BOx OR other give that problem ... this was happen to me and i fix my phone With RIFF

Sorry
Thanks for ur advice. I dnt have this equipment. The phone still have this problem. I need to show it to a professional which is very rare here.

Related

Please help my JasJar is dead

I tried to flash WM 6.1
and then Give me Error and now i have a black screen
any one can help me please!!!!
this would help
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
best of luck..
i tried all of that but not working
What error is it ?
i treid to upgrade to windows 6.1 , while i'm updating gives me error and i tried to restart my mobile but nothing at all even i can not access the bootloader
Is your computer recognizin' your PDA. What happens when you connect it to the USB port ? Also, try after removin' SIM and the SD.
P.S: And you still need to tell me, what error msgs do ya get ?
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
I presume that you are tryin' to install the ROM designed for Universal
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
try this, or search xda-developers usin' google, you may find the solution.
Error code 101 is actually connection error.
hey, are you usin' Windows Vista
no XP SP2 , but as i told you i think i installed rom not for universal
also my screen is dead nothing at all only black no serial or usb on the screen
aahmed12 said:
no XP SP2 , but as i told you i think i installed rom not for universal
Click to expand...
Click to collapse
Oh man,
you have screwed up your phone big time. Post a thread in General Discussion> Upgrading, Modifying and Unlocking. Someone there might b able to help you out on this.
All the best.
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Isaygarcia said:
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Click to expand...
Click to collapse
hey bro, error 112 actually denotes ROM update error.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
follow Method 2 , if it doesn't work, then follow Method 1, mtty may prove useful in this situation.
Good Luck..
thanks !
i havent tried the method 2.. but method 1 doesnt seem to work..
many thanx..
ok that methods doesnt work.. im stucked not in bootloader... i can exit bootloader but the system doesnt start... when i press the reset button it just keeps white screen (w/o backlit) and nothing happens.. if i connect the phone in that state just unrecognizes it and if i press the light and power buttons (without resset) it starts the bootloader.. its not reading the rom
every time that i try to flash a rom on it just fails, and it gets the error 112, on every 7%... how can i fix it?
Oops! I omitted the quote
aahmed12 said:
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
Click to expand...
Click to collapse
I have the same problem. I mistakenly flashed the wm6.1 rom meant for BA. I dont think there is any remedy for this problem because the unit is not coming on and so cannot enter bootloader. The only sign of life is the red led which means the unit is not seeing the power supply ie it does not recognise that a battery is instaaled. No one has ever come up with a solution. The unit is bricked fullstop. I am already bidding on another unit on ebay.
i did chat with imate support and they advice me to go to any service center and they will fix it.
i tried many kind of solutions but it does not work so my last choise is to send it to imate service center.

HELP PLEASE! i780 dead!

Hi everyone!
I really need help!
my samsung i780 is dead after i flashed the boot part with the eboot from DXHC4!
I already tried everything!
i flashed de boot part with E1, flashed the three parts with the c4 and e1 rom and nothing! the flash process always complete without errors!!
I can acess bootloader without problems, i can also entre the hard reset menu pressing the green , red and power button but when i press space to performe the hard reset nothing happens and i tried to wait several minutes!
when I power on the phone it doens't even show the samsung logo! Just black screen!
I would really apreciate some help!
thank you!
A good challenge for the I780 Specialists
I bet that the solution would be very easy
All the best to you
There are quite a number of answers posted. EFN had already explained too many times. He had said that the bootloader works fine, that's a good start.
Just get the necessary rom from EFN thread, phone rom PUHE1 and the pda rom DXHE1. There is even a tutorial on this in EFN thread (1st post).
g00ndu can you please help find the thread/topic where EFN explaines it, i'm having a hard time finding it!
thank you
I think he is talking about this:
http://forum.xda-developers.com/showthread.php?t=409258&highlight=EFN+PUHE1+DXHE1
download Flashing Guide Tutorial - at the bottom of the 1st post
did exactly as said in the tutorial....
nothing... it seems that the eboot is always the same.....
i don't know what else to do!
g00ndu i can't find the thread you are talking about....
where does EFN talks about the bootloader or a problem like mine??
could you please help me!
thanks!
hellboss said:
g00ndu i can't find the thread you are talking about....
where does EFN talks about the bootloader or a problem like mine??
could you please help me!
thanks!
Click to expand...
Click to collapse
Okay step by step:
Did you downloaded the russian rom i780PUHE1 (eboot+phone+pda)?
Did you downloaded the i780DXHE1 (pda only)?
Follow the tutorial, assuming step 1 to 4 had already been done.
(5) Launch Mirage updater. Select MIRAGE LV image as the profile
(6) Select EBOOT+PDA+PHONE and select the extracted RUSSIAN .img file
(7) Click on DETECT
(8) Switch on the phone while holding the ENTER and FUNCTION buttons (ALT BUTTON)
(9) After the system DETECT message appears, connect the phone via USB to your PC
(10) Wait until the image is written.
Before flashing to the DXHE1 rom first, please try to boot up and see if it works. If it is successful, you will see plenty of gibberish characters. This is EXPECTED, as the rom is russian.
If it doesn't boot up, then I am sorry I won't be able to help you.
Try the above first. Point to note is to choose eboot+phone+pda. Always press detect first before going through the enter+function+power on process.
If it works, please let me know.
g00ndu, thank you very much, but i already done that several times step by step....
but, unfortunately it stays the same....when i power it on it turns on the backlight but the screen remains black and nothing happens...
but thank you very much anyway!
hellboss, I'm sorry about your device. Perhaps it might be a hardware issue. I'm not sure.
While the device may have a black screen, you could try to see if the LED lights work, whether there is a sound after the system boot up. These are important clues to see if it is really hardware issue.
Once again, I wish you could find a solution to your problem.
Hi, i would like to know if it is possible to discover which ROM is installed in the equipment... I mean, the samsung doens't start i can only go into emergency mode,,, is it possible through the pc to discover which ROM is installed on it??
thank you!
hellboss said:
Hi, i would like to know if it is possible to discover which ROM is installed in the equipment... I mean, the samsung doens't start i can only go into emergency mode,,, is it possible through the pc to discover which ROM is installed on it??
thank you!
Click to expand...
Click to collapse
I'm not really sure, but have you try to dump your rom using pdocread, one of the itsutilsbin tools? Meaning get the Part00, Part01 and Part02 raw files which is your rom dump?
If i were you I will try most official rom to rescue the device first. like i780XHC4 that one has all three (healthy and normal) parts.
dogmood i already tried.... but still nothing...
g00ndu , to dump the ROM don't i need to change some values on some key at the pocket pc registry?? if so i can't because the pda doens't start....
P.S-the first time i flashed it i did it on a pc with windows xp but all the time the process was incomplete and i need to turn off the phone and restart the phone, and at the second time was succesful, now i'm doing it on a virtual machine running windows xp pro sp2,,,,, can my problem be related to that??
thank you!
I use a VM for the flashing myself, so this shouldnt cause problems.
If flashing the official rom (EBOOT & Phone & PDA) doesnt work for u then you have to consider the fact that your i780 busted on the hardware level.
The best thing to do now is to claim for warranty and make sure u sent them beack with official rom in your phone (HC4)
Hi EFN,
well I've considered that, and I think that my next move is going to be warranty
but unfortunately the ROM that came with the PDA was not the DXHC4, i bought my samsung in Portugal.
my problem now is that the PDA became dead when i flashed it with the DXHC4 eboot, and now that i can't flash any other ROM i can't put the original ROM, which i have a dump, on it....
so i think that is not going to be accepted on warranty....
honestly i can't discover what went wrong.... I followed every single step of the tutorial to revive a dead i780....
thanks!
P.S-> EFN, I'm a great admirer of your work (samsung i780 ROMs), unfortunately I'm not going to be able to try them......but... anyway keep up the good work!
I believe for as long as the rom on your i780 is an official one (regardless of version), Samsung will honor the warranty. You have to try to know. And of course dont tell them that you have been messing up with flashing this and that
well i think so, if the rom is an official one they will honor the warranty...
that's the why of my question about a way to know the version of the ROM installed on the PDA, but i haven't discover anything...
i guess will just try my luck and send it to warranty!
thanks!

Bricked Asus p320

I flashed my Asus p320 with win mobile 6.5 it worcked but the first time i reset the phone it got stuck in bootloader..
i already tried reflashing with original rom and some cooked roms but stil wont boot...
i need some advise please
is my phone dead? what should i do to get it to boot?
check the hardware buttons..may be one of the buttons have problems
hello
i hv a p320.
it shows a booting screen with btlr 3.1 only.
it is also not possible to update the rom from memory card as it shows 3 images found and then does nothing.
plz help.
hdubli said:
check the hardware buttons..may be one of the buttons have problems
Click to expand...
Click to collapse
Hello,
I'm a user from bangalore, actually i'd been using hdubli's custom rom, but when i was flashing, suddenly the phone got hung, and it doesn't go any further.
so i went to asus service center and checked wit them, they tell me that board is screwed, its now showing only bltr 3.1 and it doesn't go any further......
Please wn\oul'd any one tell the solution for this?
Thanks!

[Q] Bricked , any way to unbrick !

Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Explain here... You'll get your phone unbricked. Never say die
Sent from my P6-U00 using XDA Premium HD app
PulseDroid said:
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Click to expand...
Click to collapse
Well , I was trying to flash the CleanRom project , I'have made a post about that to ,
The Instructions were wery clear to me i followed them exactly how it was writen in tutorial.
I have an international verzion of P6 and according to that turorial , ( http://forum.xda-developers.com/showthread.php?t=2625680 )
in order to flash that room i moust firstly flash an Chineze verzion which comes with unlocked bootloader , then i did that
I downloaded the rom put it on phone flashed via setteings update software , then everything went fine the process it seelf showd me
completed 100% and in the end sayd OK , then my phone turned off, and it's never been on eversince :A
As of now the phone is totally dead black screen , I've tryed everything it doesent go in any mode
When i plug in the power cord it only shows a red light indicator.
I belive this is a Hard Brick , not soft brick .
Warranty? Did the same to mine got I repared for free...
jagwar1 said:
Warranty? Did the same to mine got I repared for free...
Click to expand...
Click to collapse
nope , no warranty
Nexhmedin said:
nope , no warranty
Click to expand...
Click to collapse
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
rupro327 said:
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
Click to expand...
Click to collapse
Yes i did brick my P6 and nope I aint gona tell them Im a noob :A
The thing here is to get help in here is not about send it back to china so if you have any other idea , your welcome to share.
I have no warranty , even if it had this phone is buyed in china , and traveled to the otherside of the world :it would cost as mouch as the phone itseelf to send it back to service.
Try flashing the latest TWRP, it has off mode charging. Can you put your phone in fastboot mode via adb ?
Not Hard Brick!
Happened to me before and guess what? Tried very simple thing - and it worked.
Take your sdCard out of the phone.
Replace the dload folder with the extraction from either the B111 from the Huawei site or the B125 from here on xda
Reinsert card and press all buttons down till phone goes into internal recovery.
Your main problem will be having enough battery to get you twenty minutes.
If your red light is functioning, you probably haven't blown your motherboard.
Sent from my LG-D802 using XDA Premium HD app
Nexhmedin said:
Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
Click to expand...
Click to collapse
you device boot an loop in huawei screen.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Nexhmedin said:
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Click to expand...
Click to collapse
Only solution for that is to take your phone to local service. I am talking from experience.
Sent from my ME371MG using xda app-developers app
Can you check if you plug it into you computer that your computer connects to it or makes a sound? That can probably prove that the motherboard is fine and maybe your LCD is broken or has loose connection.
Happened to me before. Black screen, only red led, nothing else working. It happened that I got scammed by a seller.
What I ended up doing was taking apart the phone and I found that the LCD connection was loose. Fixed that, then I saw that the phone wouldn't boot. Loaded B111, B118, nothing worked. I then got B125, and it miraculously worked.
You could try what I did, but it is quite risky and I was very lucky.
I have to agree with goce. Unless you are experienced and willing to mess around with things, you should go find local service.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
What can I do on my phone just flashes the red light and include only the logo of huawei.
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
gurvinder76 said:
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
Click to expand...
Click to collapse
I think you should download the TWRP recovery for jelly bean from surdu and flash it from bootloader. If you are on the international this is the method for unlocking bootloader:
http://forum.xda-developers.com/showthread.php?t=2666116
Flash a custom rom next
Sent from my P6-U06 using XDA Premium 4 mobile app

Could anyone help me please ? :)

Hello guys.. I have some problems about my samsung wave 2.. I think it is bricked but i m not sure.. Here you are some information about my problem:
-when i take charge to phone sometimes it says "file not found" or nothing happend..
- i tried to flash or something but nothing happend again
I read about jtag or something else but i could not understand my problem yet. Could any one help me about this case what is my phones problem how can i fix it? thank you..
mehmetdyn said:
Hello guys.. I have some problems about my samsung wave 2.. I think it is bricked but i m not sure.. Here you are some information about my problem:
-when i take charge to phone sometimes it says "file not found" or nothing happend..
- i tried to flash or something but nothing happend again
I read about jtag or something else but i could not understand my problem yet. Could any one help me about this case what is my phones problem how can i fix it? thank you..
Click to expand...
Click to collapse
Wave is hard to brick.
File not found means Fota try to find an android kernel somewhere. (I guess you had badadroid or stuff like that).
Either put a valid android kernel at the good place (depend of the fota you are using), then install android.
Or boot in download mode and flash a FULL bada firmware (one containing Bootfiles and Fota).
BenzoX said:
Wave is hard to brick.
File not found means Fota try to find an android kernel somewhere. (I guess you had badadroid or stuff like that).
Either put a valid android kernel at the good place (depend of the fota you are using), then install android.
Or boot in download mode and flash a FULL bada firmware (one containing Bootfiles and Fota).
Click to expand...
Click to collapse
But it doesn't work imm how can i say i could not start it. Yeah i had badadroid in phone micro sd. Coud you help me about fixing it ? Just say me what i should do step by step again thank you
Sometimes when i putcharging it says like that
now after some trying to get download mode it just open for a sec i see "download mode" and it turns off again..
mehmetdyn said:
now after some trying to get download mode it just open for a sec i see "download mode" and it turns off again..
Click to expand...
Click to collapse
Maybe battery empty...
Try to charge Battery...
I mean in working handset or in other ways...
Google... how to charge battery without handset or check this thread...
http://forum.xda-developers.com/showthread.php?t=2365748
Best Regards
adfree said:
Maybe battery empty...
Try to charge Battery...
I mean in working handset or in other ways...
Google... how to charge battery without handset or check this thread...
http://forum.xda-developers.com/showthread.php?t=2365748
Best Regards
Click to expand...
Click to collapse
Thanks to all i fix it finally

Categories

Resources