Soft Bricked Xolo Q1000 after flashing with SP Flash tool - Xolo Q1000

My phone refuses to boot after I flashed stock Rom through SP Flash Tool. I didn't get any error during flashing. but as soon as I powered on the device I could see nothing but a black screen with hazy lines, after few seconds or so phone is getting restart.
I have tried different Roms and versions of SP Flash tool but with no success.
Tried both Roms from: http://www.needrom.com/download/xolo-q1000
Please help!

gladiator9120 said:
i m facing the same carbon copy issue, please let me know if u find any solution for this.
Click to expand...
Click to collapse
Yes, I got it fixed now. Used the SP Flash Tool v3.1316.0.150 and Rom downloaded from http://www.needrom.com/download/xolo-q1000
In the link given above there are two roms available. first try to flash First(file name: XOLO-Q1000_FlashTool) rom. If still your phone doesn't bootup, you might need to first flash the Second rom(file name: Xolo Q1000 M001 25-09-2013), then after flash certain parts(I unchecked, PRELOADER and ANDROID before flashing it) from the First rom.

gladiator9120 said:
you are a life savior man, finally i saw the home screen, just one small problem i have now, that all IMEI no. are gone and so my sim is not being detected, am currently searching the net for the same, but if you have any idea please guide me. . .
And THANK YOU SOOOOOOOOOOOOO MUCH. . . .
Click to expand...
Click to collapse
Yes, I faced the same problem and eventually got it fixed too.
If you've backed up your IMEI numbers via Mobile Uncle app, you can easily get it back by simply restoring the backup file from the mobile uncle app. Otherwise, you need to push your IMEI manually.
Go to mobile uncle -> Engineer Mode -> Engineer Mode (MTK) -> slide right to Connectivity tab -> select CDS information -> Radio Information -> Phone 1
There you'll find a text field pre-filled with "A+", type AT+EGMR=1,7,"<FIRST_IMEI_NO>" without the angular brackets
Press the "SEND AT COMMAND" button. You'll get a toast message. Restart the phone and if IMEI is restored for phone 1, repeat the process for Phone 2 as well... This time select AT+EGMR=1,10,"<SECOND_IMEI_NO>".
As a precaution for next time, take a backup of the IMEI
You can get IMEI numbers from back panel after removing the battery.

Also, after flashing I couldn't get to Stock recovery and unable to flash it by Mobile Uncle. Then, I had to flash custom recovery(CWM) by the same SP Flash Tool.
As of now, everything is just working fine.

I m using q1000 only ....i was using different rom developed by ramrazj.
But; before some daes i flashed new rom ..n that got some conflict and it was restarting continually . than i tried to flash stock rom by using sp flash tool but my phone doesn't accepting fastboot mode command.
So i have flashed now one stock modified rom.
N during that conflict ; right now my phone is not detecting sim card..
I m tired now crying ......plzzz need big help from all you developers.

Ty for solution .
I tried this process but when i m sending .it is showing At command is failed to sand.
Plzzzz.... Give other solution according to u .
Thank you so much.

try these methods
dhairya. said:
Ty for solution .
I tried this process but when i m sending .it is showing At command is failed to sand.
Plzzzz.... Give other solution according to u .
Thank you so much.
Click to expand...
Click to collapse
I had the same problem but I realized that I insered the sim upside down..
Check if u Insered correctly And check your simcard on othermobile to check if the simcard working correcty
Try to install remzeej rom
http://forum.xda-developers.com/xol...nofficial-cherry-mobile-omega-hd-2-0-t3048883
Using sp flash tools.. And dont try to install any custom recovery after that
---------- Post added at 04:26 PM ---------- Previous post was at 04:14 PM ----------
dhairya. said:
Ty for solution .
I tried this process but when i m sending .it is showing At command is failed to sand.
Plzzzz.... Give other solution according to u .
Thank you so much.
Click to expand...
Click to collapse
Advance methods
http://forum.xda-developers.com/xolo-q1000/help/flashing-stock-rom-sp-flash-tool-sim-t2932733
Just check that

dhairya. said:
Ty for solution .
I tried this process but when i m sending .it is showing At command is failed to sand.
Plzzzz.... Give other solution according to u .
Thank you so much.
Click to expand...
Click to collapse
No it is actually neither of those problems. You only have to do one thing, when you type put a space between at and +
eg: - in line ""AT +EGMR=1,7,"IMEI_1" YOU MUST ENTER SPACE BETWEEN AT and +, so not AT+EG... but AT +EG.
I just now did this and fixed my IMEI got it working

My xolo Q1000 is not botting to any mode n not even showning any sort of light.......plz help me to fix it

Subhanku said:
My xolo Q1000 is not botting to any mode n not even showning any sort of light.......plz help me to fix it
Click to expand...
Click to collapse
Try Connecting it to your PC. Let me know if it Shows any kind of activities.
Check if SP flash tool is detecting your phone or not.
If it is still Detected by Flash tool, you have a chance of Recovering it. Otherwise, The phone is Hard bricked.
Most Probably Their are less chances Hard brick and you can recover it back.
Let me know if you see some results.

Related

Alcatel OT-918 (Without D/M/N) Backup

Hi everyone,
I have Alcatel OT-918(Without D/M or N) I messed up my system and it is not working now.
It was running Android 2.3.6 Gingerbread.
If anyone has access to this stock ROM please post the link..
ELSE
If some has a phone like mine and I a kindly requesting that you back it up for me(minus your sensitive data of course) and post it.
I will be grateful.
I have tried all approaches including One-touch Upgrade but it just says my phone is up to date.
Thanks all
LEARNING NEVER STOPS
kippsoft said:
Hi everyone,
I have Alcatel OT-918(Without D/M or N) I messed up my system and it is not working now.
It was running Android 2.3.6 Gingerbread.
If anyone has access to this stock ROM please post the link..
ELSE
If some has a phone like mine and I a kindly requesting that you back it up for me(minus your sensitive data of course) and post it.
I will be grateful.
I have tried all approaches including One-touch Upgrade but it just says my phone is up to date.
Thanks all
LEARNING NEVER STOPS
Click to expand...
Click to collapse
I found THE solution of our problem man !!!!!
I found it !
I assume you have already Flash Tools and One Touch Upgrade 1.8.2
Step 1 : Download the file '2.3.5_Europe.zip' (file attachement)
Step 2 : Open Flash Tool
- Option --> Check USB MODE
- Option --> Backup Restore NVRAM --> Check Backup --> .....
- Scater-loading File --> "MT6573_Android_scatter.txt" (in 2.3.5_Europe)
- Click DOWNLOAD
Step 3 : Wait up to the end.
When it's finished, open One Touch Upgrade and do an Upgrade
It works very well now !!
Bye !
[email protected] (french developper)
marcorennes said:
I found THE solution of our problem man !!!!!
I found it !
I assume you have already Flash Tools and One Touch Upgrade 1.8.2
Step 1 : Download the file '2.3.5_Europe.zip' (file attachement)
Step 2 : Open Flash Tool
- Option --> Check USB MODE
- Option --> Backup Restore NVRAM --> Check Backup --> .....
- Scater-loading File --> "MT6573_Android_scatter.txt" (in 2.3.5_Europe)
- Click DOWNLOAD
Step 3 : Wait up to the end.
When it's finished, open One Touch Upgrade and do an Upgrade
It works very well now !!
Bye !
[email protected] (french developper)
Click to expand...
Click to collapse
Thanks for sharing marcorennes,
I have a 918d with android 2.3.5.
Your zip file is named "2.3.5_Europe.zip", does this mean that preloader and dsp_bl in this file are from android 2.3.5?
The reason I ask is that I dont seem to be able to 'read back' preloader and dsp_bl from a working phone (with SP Flash Tool), something wrong wih the file header in both files.
So it would be nice if I can use your preloader and dsp_bl...
Thanks in advance.
Loksman said:
Thanks for sharing marcorennes,
I have a 918d with android 2.3.5.
Your zip file is named "2.3.5_Europe.zip", does this mean that preloader and dsp_bl in this file are from android 2.3.5?
The reason I ask is that I dont seem to be able to 'read back' preloader and dsp_bl from a working phone (with SP Flash Tool), something wrong wih the file header in both files.
So it would be nice if I can use your preloader and dsp_bl...
Thanks in advance.
Click to expand...
Click to collapse
Hi,
This is a zip file extract from an OT 918d in 2.3.5.
So I think you can take these ones.
I you use it, don't forget to use One Touch Upgrage after.
I used it for my OT 918 (without m/n/d) and it worked very well.
marcorennes said:
Hi,
This is a zip file extract from an OT 918d in 2.3.5.
So I think you can take these ones.
I you use it, don't forget to use One Touch Upgrage after.
I used it for my OT 918 (without m/n/d) and it worked very well.
Click to expand...
Click to collapse
Merci Marco,
It worked like a charm.
I still wonder why I cant extract a valid preloader and dsp_bl from my working phone, did you extract them with SP Flash Tool?
I compared your preloader and mine and they are completely different.
Un grand merci.
Loksman said:
Merci Marco,
It worked like a charm.
I still wonder why I cant extract a valid preloader and dsp_bl from my working phone, did you extract them with SP Flash Tool?
I compared your preloader and mine and they are completely different.
Un grand merci.
Click to expand...
Click to collapse
I found this archive on Chinese forum which posted a Russian link (maybe the 42 nd page on google search ) ...
It was hard !! (thank you google translate :laugh: )
I'm glad to hear that it's work for you !
KENAVO !!
hi I had a problem with my alcatel, bad file has loaded when installing the new firmware. I wrote up for service, and told him to repeat the operation of removing the battery, and if it does not work so I gave it wanted to guarantee. phone when connected to the ot the firmware upgrade does not install because it showed there is an updated, did not even turn on. after using your phone card is alive, it's much better than before, and finally I have the language of his country, thanks kippsoft :good:
marcorennes said:
I found THE solution of our problem man !!!!!
I found it !
I assume you have already Flash Tools and One Touch Upgrade 1.8.2
Step 1 : Download the file '2.3.5_Europe.zip' (file attachement)
Step 2 : Open Flash Tool
- Option --> Check USB MODE
- Option --> Backup Restore NVRAM --> Check Backup --> .....
- Scater-loading File --> "MT6573_Android_scatter.txt" (in 2.3.5_Europe)
- Click DOWNLOAD
Step 3 : Wait up to the end.
When it's finished, open One Touch Upgrade and do an Upgrade
It works very well now !!
Bye !
[email protected] (french developper)
Click to expand...
Click to collapse
Hey dude I used your method to flash my Alcatel One Touch 918N with 2.3.6 Gingerbread but now the phone is not booting. Earlier it was just rebooting in loop. Please give any solution. :crying:
HellRocker™ said:
Hey dude I used your method to flash my Alcatel One Touch 918N with 2.3.6 Gingerbread but now the phone is not booting. Earlier it was just rebooting in loop. Please give any solution. :crying:
Click to expand...
Click to collapse
i think you need to update using the update manager, not tried it myself coz my phone has never had that problem..
my bro got the alcatel ot918 but its sim-network locked, will flashing the rom again get rid of it?
got no much experience with alcatels!
query
HellRocker™ said:
Hey dude I used your method to flash my Alcatel One Touch 918N with 2.3.6 Gingerbread but now the phone is not booting. Earlier it was just rebooting in loop. Please give any solution. :crying:
Click to expand...
Click to collapse
Hi Bro, got same problem with u, did u get any solution already? please share i f u do..
---------- Post added at 12:02 PM ---------- Previous post was at 11:58 AM ----------
ruftas said:
i think you need to update using the update manager, not tried it myself coz my phone has never had that problem..
Click to expand...
Click to collapse
nid help, what particular update manager bro.? can u share a link? thanks much in advance..
glenb0y said:
Hi Bro, got same problem with u, did u get any solution already? please share i f u do..
---------- Post added at 12:02 PM ---------- Previous post was at 11:58 AM ----------
nid help, what particular update manager bro.? can u share a link? thanks much in advance..
Click to expand...
Click to collapse
Having the same problem. phone wont even be detected to try an upgrade. please help!!
Bricked phone
I bricked my phone after using the flashtool and 2.3.5_Europe file.
It wont even power on , i dont know what to do.
can anyone help me
Possible Solution
boban984 said:
I bricked my phone after using the flashtool and 2.3.5_Europe file.
It wont even power on , i dont know what to do.
can anyone help me
Click to expand...
Click to collapse
Ok well first off i would tell you to charge your phone for a hour or two, then try to boot to Recovery Mode, power + volume up, load a custom rom for your device, then use alcatel's upgrade software tool to update back to stock rom. This worked for my 918 Mix (without d/m/n).
A custom rom for the 918 is the Gingerblaze, you can google it, its gingerbread 2.3.5 so you will be upgraded by alcatel's servers to 2.3.6.
boban984 said:
I bricked my phone after using the flashtool and 2.3.5_Europe file.
It wont even power on , i dont know what to do.
can anyone help me
Click to expand...
Click to collapse
I thought I also bricked by phone and almost gave up. After flashiing 2.3.5_europe it wouldn't even power on. Not even to recovery. No activity at all when pressing the power switch. So I tried to do an OTU using v1.8.2 and the OTU successfully completed. After that, ok na!
benjieg said:
I thought I also bricked by phone and almost gave up. After flashiing 2.3.5_europe it wouldn't even power on. Not even to recovery. No activity at all when pressing the power switch. So I tried to do an OTU using v1.8.2 and the OTU successfully completed. After that, ok na!
Click to expand...
Click to collapse
Tried OTU using 1.8.3 to no avail. Any other solutions?
No need otu u just needed ah custom room just put into you sdcard and goto recovery install from sdcard.. tjen wait until finish and done
Sent from my ALCATEL ONE TOUCH 918D using Tapatalk 2
Alcatel One Touch 918 Bricked/Not Powering after Root
I had Alcatel One Touch 918 with android 2.3.6 on it and tried to root It. It installed, but stuck at booting, at the android logo.Then i tried to restore, using first the partial backup that i did, then with "Smart Phone Flash tool".I did a format : "Auto Format Nand Flash" "Format all flash".It`s connects to the phone and it formatted.
But when i try to Download something (F9) it`s only giving error and says : "SP Flash tool error (9100)
[Android USB] Can not find USB Port.
For formatting it can find.I tried removing the battery and tring after, but it`s not working.The phone can not even power on. I tried even using one touch upgrade tool, But still says my phone has the latest ROM.Once i connect it to a PC I can here the PC detect is by the USB connect sound but doesnt show its charging. Someone help on how to recover the original ROM or even how to get my phone working
Alcatel 918N stuck on idea logo
marcorennes said:
I found THE solution of our problem man !!!!!
I found it !
I assume you have already Flash Tools and One Touch Upgrade 1.8.2
Step 1 : Download the file '2.3.5_Europe.zip' (file attachement)
Step 2 : Open Flash Tool
- Option --> Check USB MODE
- Option --> Backup Restore NVRAM --> Check Backup --> .....
- Scater-loading File --> "MT6573_Android_scatter.txt" (in 2.3.5_Europe)
- Click DOWNLOAD
Step 3 : Wait up to the end.
When it's finished, open One Touch Upgrade and do an Upgrade
It works very well now !!
Bye !
[email protected] (french developper)
Click to expand...
Click to collapse
hello sir.. alcatel 918n stuck on idea logo after hard reset.. one touch upgrade is not having 918n model.. i tried connecting by 918 but its nt connecting.. help me please if possible give me ur mail id..
thanku
Stocl Rom for OT918 2.3.6
kippsoft said:
Hi everyone,
I have Alcatel OT-918(Without D/M or N) I messed up my system and it is not working now.
It was running Android 2.3.6 Gingerbread.
If anyone has access to this stock ROM please post the link..
ELSE
If some has a phone like mine and I a kindly requesting that you back it up for me(minus your sensitive data of course) and post it.
I will be grateful.
I have tried all approaches including One-touch Upgrade but it just says my phone is up to date.
Thanks all
LEARNING NEVER STOPS
Click to expand...
Click to collapse
Hello kippsoft,
I have the same phone as you OT918 without D/M or N with 2.3.6
I've bricked my phone and I try to find the stock ROM.
I 've used One-touch Upgrade but now my phone is a OT918D with a dual SIM and android 2.3.5
I have some problem with the gps. It switch off the phone.
So I want to re install the original ROM in 2.3.6
Could you help me please ?
Ricky
---------- Post added at 09:39 AM ---------- Previous post was at 09:34 AM ----------
Loksman said:
Merci Marco,
It worked like a charm.
I still wonder why I cant extract a valid preloader and dsp_bl from my working phone, did you extract them with SP Flash Tool?
I compared your preloader and mine and they are completely different.
Un grand merci.
Click to expand...
Click to collapse
Hello Loksman,
I have the OT918 without D/M or N with 2.3.6
I've bricked my phone and I try to find the stock ROM.
I 've used One-touch Upgrade but now my phone is a OT918D with a dual SIM and android 2.3.5
I have some problem with the gps. It switch off the phone.
So I want to re install the original ROM in 2.3.6
Could you help me please ?
Ricky

[Q] HOW TO RECOVER -Xperia Play if fail on custom ROM

Hello there,
I need Help from you all.
I've been searching and google for a long time for how to make my phone alive back T.T
I'm using Xperia Play.
recently, i'm trying to change my phone ROM.
But maybe of my mistake i end-up by my phone stuck after SONY ERICSSON logo.
It become Black screen after that ..
so many time i try to make it into cwm but it fail .. i even try pressing vol down , vol up . back , and many other ..
but it wont go to cwm again .
What i do?[when i in cwm to flash rom]
1. i have clear [dalvik,cache,data, and anything that must clear]
2. i mount /system
3. flash rom
4. flash g-apps
5. flash hotspot [fix]
6.reboot
and then . This What Happen.
The worst .
when i plug my phone to pc . The pc can't detect usb debugging [WHEN BLACK SCREEN]
i even not backup anything .. [That is the worst]
OK here the recent try that i done
->>> I try to make my phone into fastboot and it work [by pressing search key then connect to pc /flashtool]
then i pick that thunder image and take fastboot.
I'm trying to flash kernel by this LuPuS_zeus_Stock-gB+iCsv7-full and it said that my phone is UNROOT!!!
*I got some idea: is there some way to make debugging turn on [in fastboot,cmd command,application or anything when it stuck after the sony ericsson logo .coz flashtool said that i can connect but my debugging is off and it not in mass storage state ...
Is there is still hope to make it live back?
I really love That phone . I really love it .
pls help me
As i see it, your bootloader is locked, you have (had) recovery for locked bootloader and you tried to flash custom rom and custom kernel. "it won't work" is short description, long description is your entire first post.
You have two options:
A) Unlock your bootloader and try flash kernel and rom again (you didn't say what model you have, so it might not be even possible)
B) flash stock firmware (ftf) with flashtool or even better, use pc companion to get your phone back to life
Sent from my C6502 using XDA Free mobile app
Bakisha said:
As i see it, your bootloader is locked, you have (had) recovery for locked bootloader and you tried to flash custom rom and custom kernel. "it won't work" is short description, long description is your entire first post.
You have two options:
A) Unlock your bootloader and try flash kernel and rom again (you didn't say what model you have, so it might not be even possible)
B) flash stock firmware (ftf) with flashtool or even better, use pc companion to get your phone back to life
Sent from my C6502 using XDA Free mobile app
Click to expand...
Click to collapse
You giving me a hope .. i can see how it end ..Thank you so much .
btw . i find this article http://forum.xda-developers.com/xperia-z/development/noobs-guide-create-stock-firmware-ftf-t2188129
can i use this way to make my phone alive?
Nazimiboy said:
You giving me a hope .. i can see how it end ..Thank you so much .
btw . i find this article http://forum.xda-developers.com/xperia-z/development/noobs-guide-create-stock-firmware-ftf-t2188129
can i use this way to make my phone alive?
Click to expand...
Click to collapse
i has done all the thing in that link .. at the end . my phone cant even load the sony ericsson logo .
if i push power button . it will vibrate and on the power there got green light but just in split second ..
the screen just black and nothing happen .
when i'm flash it into my phone at the end . i got this message from flash tool
13/033/2014 21:33:41 - ERROR - (X10flash.java:523) - Error in processHeader : 22 : The device does not recognize the command.
13/033/2014 21:33:41 - ERROR - (X10flash.java:524) - Error flashing. Aborted
hmm now it getting complicated .. T.T
idk what the problem .
i'm still noob
Nazimiboy said:
hmm now it getting complicated .. T.T
idk what the problem .
i'm still noob
Click to expand...
Click to collapse
I can't help you much because you decided to complicate things.
Just download Pc companion and repair your phone.
Sent from my C6502 using XDA Free mobile app
http://forum.xda-developers.com/showthread.php?t=2184897
You can find a ton of stuff here ^^
So find your stock ftf file (depending on what version of phone you have) and flash it via flashtool. Hopefully you still can. Give Google a shot if you need instructions.
Or go here -> http://forum.xda-developers.com/showthread.php?t=2054486
PLEASE USE THE PROPER FIRMWARE FOR YOUR PHONE. You may cause irreparable damage to your phone if you flash the wrong firmware.
Sorry for the all caps, but I just want to make sure that I helped and didn't cause any more issues. Best of luck for you.
Sent from my XT1058 using XDA Free mobile app
thatdude02 said:
http://forum.xda-developers.com/showthread.php?t=2184897
You can find a ton of stuff here ^^
So find your stock ftf file (depending on what version of phone you have) and flash it via flashtool. Hopefully you still can. Give Google a shot if you need instructions.
Or go here -> http://forum.xda-developers.com/showthread.php?t=2054486
PLEASE USE THE PROPER FIRMWARE FOR YOUR PHONE. You may cause irreparable damage to your phone if you flash the wrong firmware.
Sorry for the all caps, but I just want to make sure that I helped and didn't cause any more issues. Best of luck for you.
Sent from my XT1058 using XDA Free mobile app
Click to expand...
Click to collapse
I try flash the FTF R800i_4.0.2.A.0.58_Enhanced.ftf[/SIZE]
i use that ... and my phone still wont turn on . it just vibrate .T.T
Nazimiboy said:
I try flash the FTF R800i_4.0.2.A.0.58_Enhanced.ftf[/SIZE]
i use that ... and my phone still wont turn on . it just vibrate .T.T
Click to expand...
Click to collapse
ok .. i have make something ...
i flash the ftf and i INCLUDE THE KERNAL AND NOW MY PHONE CAN TURN ON .
BUT..
it shut down when it want to home screen.
i noticed it write ANDROID SYSTEM and then it shut down . [on top of screen]
updated [GOOD news!! my phone is back!! it can on now ...]
god thanks .. T.T <-- tear of happiness!!!!!
Nazimiboy said:
Hello there.
I need your help since you are using xperia play
recently , i make a modification at my phone . i change the rom (i forgot what there rom name)
you can read here for information http://forum.xda-developers.com/xperia-play/help/how-to-recover-xperia-play-fail-custom-t2814347/post54169071#post54169071
right now .. my phone still wont turn on . it just vibrate and green blink just once when i press power button.
i hope you can help me .. If you want to ask anything . i will answer you as long as i know ..
you the only hope. T.T
Click to expand...
Click to collapse
Please don't use BIG FONT SIZE'S
well i would have came here and posted the same stuff already said... please don't PM members who no longer own this phone asking (well begging) for help. i no longer support Xperia Play and from what i can tell you fixed it using my guide anyway.
I SUGGEST YOU VISIT THIS LINK - http://bit.ly/xda965 - AND LEARN!
fma965 said:
Please don't use BIG FONT SIZE'S
well i would have came here and posted the same stuff already said... please don't PM members who no longer own this phone asking (well begging) for help. i no longer support Xperia Play and from what i can tell you fixed it using my guide anyway.
I SUGGEST YOU VISIT THIS LINK - http://bit.ly/xda965 - AND LEARN!
Click to expand...
Click to collapse
alright . thank you well .. srry for the big font . XD i just want it easy to read . XD yeah sorry sorry .. .

Help!!! Android One Hard bricked!!

First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB
GokulNC said:
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB
Click to expand...
Click to collapse
I did it same problem...
KrishuFC said:
I did it same problem...
Click to expand...
Click to collapse
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.
GokulNC said:
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.
Click to expand...
Click to collapse
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //
KrishuFC said:
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //
Click to expand...
Click to collapse
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there
GokulNC said:
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there
Click to expand...
Click to collapse
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??
KrishuFC said:
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??
Click to expand...
Click to collapse
Sorry, but I no longer have that phone
Just ask someone else.
GokulNC said:
Sorry, but I no longer have that phone
Just ask someone else.
Click to expand...
Click to collapse
Ok then! it seems nobody is gonna help me
KrishuFC said:
Ok then! it seems nobody is gonna help me
Click to expand...
Click to collapse
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them
GokulNC said:
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them
Click to expand...
Click to collapse
I'm trying!! lets hope
I also have same problem.. can anyone provide a solution
KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]
Sagar Kapasi said:
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]
Click to expand...
Click to collapse
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...
KrishuFC said:
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...
Click to expand...
Click to collapse
So You Are Saying You Left That Phone Dead?
Sagar Kapasi said:
So You Are Saying You Left That Phone Dead?
Click to expand...
Click to collapse
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...
KrishuFC said:
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...
Click to expand...
Click to collapse
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!
Sagar Kapasi said:
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!
Click to expand...
Click to collapse
Yes give it a try why not you should go...

Need modified .tot for LS980

Hi everybody, is there any one who can give me a link of .tot modified file with hex editor, I flashed my phone (LS980) with wrong firmware (D802) and when I try to flash it with the right file wich is destined for LS980 the flash tool consider the phone as a D802 model, I tried all methods I found on XDA to restore my phone but nothing done, my phone still brick, and the only way to flash it now is to modify the .tot file with a hex editor soft, if there is someone who can give me a link to that file, or to show me the exact line to modify in the file and which hex soft to use it will be a great help for me.
Thank you in advance (Please try to give the help I demand, because I tried every methods)
Hello kakah2011, First of all i'd tell you to calm down its gonna be alright. secondly can you explain briefly the previous version of software you were running. Android version and the software version, if you could mention would be of great help. And did you flash D802 rom yourself, as if it were running LS980 previously or did you buy the phone already flashed with a fake D802 rom. I can guide and provide you on how to resolve the issue but first i need to make sure which partitions are flashed to your phones memory currently.
just relax. i had exactly the same issue and it got sorted out. My phone(hardware ls980) came with a fake 802 software on it. So i assumed its a 802 and flashed 802 roms on it till it completely got screwed up. the touch went crazy and the phone got into a auto restart loop.
I have the edited file, but i dont know how to give you a 2.5 gb file. Any ideas how it can be shared.
I edited the original file using flexhex. You just need to change the first instance of the word LS980 to D802. the trick here is that in hex editor format when we replace L with D , S with 8, 9 with 0, 8 with 2,0 we replace with a spacebar. The last parts a mistake. 0 should be replaced by a blank and not a spacebar. Copy a blank from nearby and insert it. or try a 00 value. I dont remember exactly what i did. but my mistake was that i was replacing the 0 with a space bar.
after the format, my phone stopped getting into the download mode. Instead i got stuck in some fastboot mode which was getting activated by using the volume up key while inserting the wire(before this, i was getting download mode in volume down+usb wire insertion). had to struggle a bit to get the phone back to download mode. I used something called adb tools to get this done. If you konw these tools, its just a 2 min job.
After that i reflashed the original tot file of ls980 and the phone started working great.
if you need anyhelp, call me if you are from india on 9700000678. Else pm here or email on [email protected]
dont forget to thank me.
megasamsid8 said:
Hello kakah2011, First of all i'd tell you to calm down its gonna be alright. secondly can you explain briefly the previous version of software you were running. Android version and the software version, if you could mention would be of great help. And did you flash D802 rom yourself, as if it were running LS980 previously or did you buy the phone already flashed with a fake D802 rom. I can guide and provide you on how to resolve the issue but first i need to make sure which partitions are flashed to your phones memory currently.
Click to expand...
Click to collapse
Thak you Mr, I think that the previous Firmware before I flash it was a LS980 (4.4.2 or 4.2.2), and I think that the version that I flashed the phone with is 16GB, and I can't use adb fastboot with PC to because it don't recorgnize the IMEI and the only way to restore it is the download mode (No Philz recovery) and I must notice that the screen is not normal (when I push it in an area it moves in another), I think that it's bricked for ever!!!!???
krunalkamdar said:
just relax. i had exactly the same issue and it got sorted out. My phone(hardware ls980) came with a fake 802 software on it. So i assumed its a 802 and flashed 802 roms on it till it completely got screwed up. the touch went crazy and the phone got into a auto restart loop.
I have the edited file, but i dont know how to give you a 2.5 gb file. Any ideas how it can be shared.
I edited the original file using flexhex. You just need to change the first instance of the word LS980 to D802. the trick here is that in hex editor format when we replace L with D , S with 8, 9 with 0, 8 with 2,0 we replace with a spacebar. The last parts a mistake. 0 should be replaced by a blank and not a spacebar. Copy a blank from nearby and insert it. or try a 00 value. I dont remember exactly what i did. but my mistake was that i was replacing the 0 with a space bar.
after the format, my phone stopped getting into the download mode. Instead i got stuck in some fastboot mode which was getting activated by using the volume up key while inserting the wire(before this, i was getting download mode in volume down+usb wire insertion). had to struggle a bit to get the phone back to download mode. I used something called adb tools to get this done. If you konw these tools, its just a 2 min job.
After that i reflashed the original tot file of ls980 and the phone started working great.
if you need anyhelp, call me if you are from india on 9700000678. Else pm here or email on [email protected]
dont forget to thank me.
Click to expand...
Click to collapse
Thank you Mr, If you can share the file it will be great, if you can't I will try to edit the file as you say, maybe it's the trick that I missed, will try it and tell you the result.Thank you Mr
krunalkamdar said:
just relax. i had exactly the same issue and it got sorted out. My phone(hardware ls980) came with a fake 802 software on it. So i assumed its a 802 and flashed 802 roms on it till it completely got screwed up. the touch went crazy and the phone got into a auto restart loop.
I have the edited file, but i dont know how to give you a 2.5 gb file. Any ideas how it can be shared.
I edited the original file using flexhex. You just need to change the first instance of the word LS980 to D802. the trick here is that in hex editor format when we replace L with D , S with 8, 9 with 0, 8 with 2,0 we replace with a spacebar. The last parts a mistake. 0 should be replaced by a blank and not a spacebar. Copy a blank from nearby and insert it. or try a 00 value. I dont remember exactly what i did. but my mistake was that i was replacing the 0 with a space bar.
after the format, my phone stopped getting into the download mode. Instead i got stuck in some fastboot mode which was getting activated by using the volume up key while inserting the wire(before this, i was getting download mode in volume down+usb wire insertion). had to struggle a bit to get the phone back to download mode. I used something called adb tools to get this done. If you konw these tools, its just a 2 min job.
After that i reflashed the original tot file of ls980 and the phone started working great.
if you need anyhelp, call me if you are from india on 9700000678. Else pm here or email on [email protected]
dont forget to thank me.
Click to expand...
Click to collapse
Thank you Mr I will try this trick and tell you if it work.Thinx
kakah2011 said:
Thank you Mr I will try this trick and tell you if it work.Thinx
Click to expand...
Click to collapse
It's a great trick that show me, but the problem now is that the phone stay on the LG logo, and not detected by fastboot tool on my pc (I installed drivers for adb), I think that the serial number is lost, and I can't start the phone normaly.
Any help thank you
kakah2011 said:
It's a great trick that show me, but the problem now is that the phone stay on the LG logo, and not detected by fastboot tool on my pc (I installed drivers for adb), I think that the serial number is lost, and I can't start the phone normaly.
Any help thank you
Click to expand...
Click to collapse
I done as you said, the phone is detected on the PC but the problem is that I don't know which part must I flash in order to get back the "Download Mode", can you help me ? Thank you
Follow this tutorial to flash all your partitions..
http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
erasing and flashing these files will make download mode work again.
Keep us updated with the progress.
Goodluck
Btw g2 never gies its a tough champ keep your hopes high
megasamsid8 said:
Follow this tutorial to flash all your partitions..
http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
erasing and flashing these files will make download mode work again.
Keep us updated with the progress.
Goodluck
Btw g2 never gies its a tough champ keep your hopes high
Click to expand...
Click to collapse
Is there any method to flash the .tot file firmware using fastboot? because there is no more download mode after flashing the modified firmware using FlexHex. Any suggestion ?
kakah2011 said:
Is there any method to flash the .tot file firmware using fastboot? because there is no more download mode after flashing the modified firmware using FlexHex. Any suggestion ?
Click to expand...
Click to collapse
The .tot can only be flashed in download mode, on a serious note i'd suggest you here to give your phone to some expert it wouldn't cost you much. But if you'd like to follow.. download mode can easily be restored using the method in the link i just provided earlier. When you get into download mode only then your rom can be restored.. btw please follow as instructed cause if something wrong goes here eg flashing wrong image in fastboot or wiping all at once.. could lead the phone to hard brick and would cost you double as much later to get it fixed. My personal suggestion is to pay $15-30 for this operation and get it over with.. do you have any suitable repair shops in your area?
When I attempt to flash some parts of the downloaded ZVE partition file it gives me an that there is an error in the partition
kakah2011 said:
When I attempt to flash some parts of the downloaded ZVE partition file it gives me an that there is an error in the partition
Click to expand...
Click to collapse
First I want to thank every one who helped me to restore my G2(especially Krunal Jain who shows me the first step which is the key), finally you've just to download the LAF file and flash it in order to get back download mode then you can flash the .tot firmware of the LS980.
The prbleme now is that there is no more adresse MAC when entering to Wifi settings, and also Cellular network, I guess that these two things need a lot of search to restore them !! Any suggestion??? THANK YOU GUYS
kakah2011 said:
First I want to thank every one who helped me to restore my G2(especially Krunal Jain who shows me the first step which is the key), finally you've just to download the LAF file and flash it in order to get back download mode then you can flash the .tot firmware of the LS980.
The prbleme now is that there is no more adresse MAC when entering to Wifi settings, and also Cellular network, I guess that these two things need a lot of search to restore them !! Any suggestion??? THANK YOU GUYS
Click to expand...
Click to collapse
So is your device powered on now ? CHEERS... and yes LS980 is sprint locked so you've to follow the unlock method to get gsm on your phone. its easy.. good job mate.. Root your phone and follow here to network unlock ZVE .. should work on ZVE http://forum.xda-developers.com/showthread.php?t=2655133
Goodluck
I need some help also
My lg g2 was also a refurbished one and comes with fake d802 software which make a mes for me. As i flash lollipop from offcial lg flashtool. The screen goes erratic but then i discovered it is a refurbished model and brought my phone to shop for repair. Person thier flash ls980 rom as the model is ls980 from board. touch screen start working but no sim. When i insert sim it gives error com.phone.android stopped.and the person who flashed rom says that your emmc is damaged.what to do now guys plz help and the messaging app also give force close error
megasamsid8 said:
So is your device powered on now ? CHEERS... and yes LS980 is sprint locked so you've to follow the unlock method to get gsm on your phone. its easy.. good job mate.. Root your phone and follow here to network unlock ZVE .. should work on ZVE http://forum.xda-developers.com/showthread.php?t=2655133
Goodluck
Click to expand...
Click to collapse
Is it normal that when I press *#06# it shows anything ? but when I go to settings I find the IMEI!!!
Before I proceed to Unlock I must fix the IMEI, and in order to fix it I need root, I tried ioroot but it shows many errors !!!
Thank you
kakah2011 said:
Is it normal that when I press *#06# it shows anything ? but when I go to settings I find the IMEI!!!
Before I proceed to Unlock I must fix the IMEI, and in order to fix it I need root, I tried ioroot but it shows many errors !!!
Thank you
Click to expand...
Click to collapse
When I enter "About Phone", "Status" it shows ICCID and IMSI "Unknown" is there any solution to fix it ?
Thank you guys
hello kakah i had the same issue few hours ago with my LS980, cant access download mode cz i flashed wronge fal, aboot & boot , of d802
now im stuck on bootloop
could you help me please
i'm from Staoueli -ALgiers
thanks in advance
nadjib_unreal said:
hello kakah i had the same issue few hours ago with my LS980, cant access download mode cz i flashed wronge fal, aboot & boot , of d802
now im stuck on bootloop
could you help me please
i'm from Staoueli -ALgiers
thanks in advance
Click to expand...
Click to collapse
holla amigo im from algeria to
now i have the same prob as u ! so could we help each other to get it worked again :/
benniche farid said:
holla amigo im from algeria to
now i have the same prob as u ! so could we help each other to get it worked again :/
Click to expand...
Click to collapse
Hello brother
I fixed mine yesterday, i ll tell what to do
If you want to get access to download mode, just remove the buttons connector ,then that metalic plat that its glued in just to get access tothe ic chip and motherboard , of course to do this u need to takr off the baterry and all connectors, once u takr off yhe buttons reconnect every connwctor except the one of buttons and baterry
Thrn connect the the phone to the pc by using a usb (without baterry) then u need a liyyle screw driver or a wire to short the capacitor c5000 and c5004, keep trying till u heard thr pc detect new device named qhusb
Great , for that you need to download srk tool 2.1 just google it
Then selectfix utility then unbrick qhusb and select the correct drive
It will flash : haf, boot , aboot
Thats good for now ur download mode is back to life
Then for ls980 u need to install stock tot file (ls890zv7.tot) flash it with lg flash tool use manual mode u need a dll file (lgls980_20130904_lgflashv151.dll) download it on google... i ll send you links later hiw to do this,im using my phone
Once finished , ur phone is back to life but no signal
Easy ,just need to root. Then install twrp recovery
After that u need to install via recovery mode the (ls980stockuniversal to d802.zip)
And u re phone is getting signal and being fixed
edit: here the tutorial links that helps ya how to do everything
1- to get your phone alive ( to be detected as qusb_bulk)
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
2- this to fix the qusb issue & download mode back to life
https://www.youtube.com/watch?v=ERZvlJIC9dE
3- to install the stock tot rom , Root , then install twrp recovery mode , & then full unlock you cell phone
https://www.youtube.com/watch?v=FGQ2aGlumWs
http://forum.xda-developers.com/sprint-g2/general/sprint-lg-g2-ls980-100-unlock-tm-att-t3188248

Zenfone2 ZE550ML Z008 No Sound call &Flash image failure (FAILED (wrong image format)

Zenfone2 ZE550ML Z008 No Sound call &Flash image failure (FAILED (wrong image format)
OK, after some search and trying, i really need more help from xda community, especially asus zenfone 2 ZE550ML user and developer and others too
so, this is whats happen so far:
i got this phone from my sister, asus zenfone 2 ZE550ML Z008 2GB memory with weird problem...
the phone cannot send/receive sound from phone calling.
the call can be made, but not any sound can be heard, in and out...
well, maybe the mic and speaker broken, i found that it is not the case...
why? because any messenger apps (Whatsapp, BBM, IMO, Line) which have voice call, worked just fine, no problem at all
i tried self test (using calulator .12345+= trick) everything working just fine too.
it happen too even when using earphone (which i already tested again worked fine with Whastapp, BBM, Line, IMO, maybe other apps too). the earphone is fine, normal and working OK
i tried doing factory reset, failed, after some search, for anything that can be done, it said disable ok google detection, turn ON dial pad, update asus call screen, etc,
let me know if there is more things to try...
i also already try wipe factory reset and cache from recovery mode, still no luck...
i also find that the SIM2 IMEI is unknown/null, but SIM 1 IMEI still normal...
tried changing to SIM 2, and as expected, it didnt get any signal, so cannot be used
i tried all OTA update to the latest update, and the problem still exist
so i think i should flash using Asus Flash Tools (AFT) using flash raw file so it can fix this problem, to make the phone really like new again...
but, another problem arise...
i already prepare all driver and AFT and raw file...
in device manager, everything fine, no any yellow/red mark to any device...
boot to fastboot mode, connect the usb cable, detected in AFT and status is connected with blue circle.
but i cannot flash when i click start, after a while, yellow circle, then red circle with note "Flash image failure (FAILED (wrong image format))"
it failed and not flash the phone, the phone can still be used normal like nothing
happen (but still with the problem i mention )
OK, maybe, the file i downloaded corrupted, so i download again few times, but it keep showing the same error
"Flash image failure (FAILED (wrong image format))"
i tried download other version, and error still the same
i also tried different version of AFT from 1.0.0.14 until the latest one, 1.0.0.55 , and still same error...
i am sure my phone is ZE550ML since in the back of the phone there is written Model : ASUS_Z008, or am i wrong??
after that, i tried flash using ADB and zip file from asus site, with the most older file, which is "UL-Z008-WW-2.12.40.9-user.zip" but cannot be done, it is said cannot flash with older version than the current firmware
so i download the latest firmware "UL-Z008-WW-4.21.40.191-user.zip" which is marsmellow, hoping my problem can be fix
but, the problem still exist...really exactly the same way...really confusing
tried self test again, yup, 100% still the same problem...
so now, i need advice and any info, how to flash using AFT and raw file...??
or how to fix the "Flash image failure (FAILED (wrong image format))" error.
FYI, this phone still not root or unlock bootloader (i suppose, because my sister just use it as it is)
but i notice in fastboot mode, the "BOOTLOADER VERSION - Unknown" is it mean it already unlock or what??
Please help me, any advice, suggestion or info highly appreciated...
thx, and sorry for the poor english writing
kim7tng said:
OK, after some search and trying, i really need more help from xda community,
especially asus zenfone 2 ZE550ML user and developer and others too
so, this is whats happen so far:
i got this phone from my sister, asus zenfone 2 ZE550ML Z008 2GB memory with weird
problem...
the phone cannot send/receive sound from phone calling.
the call can be made, but not any sound can be heard, in and out...
well, maybe the mic and speaker broken, i found that it is not the case...
why? because any messenger apps (Whatsapp, BBM, IMO, Line) which have voice call,
worked just fine, no problem at all
i tried self test (using calulator .12345+= trick) everything working just fine too.
i tried doing factory reset, failed, after some search, for anything that can be
done, it said disable ok google detection, turn ON dial pad, update asus call screen,
etc,
let me know if there is more things to try...
i also already try wipe factory reset and cache from recovery mode, still no luck...
i also find that the SIM2 IMEI is unknown/null, but SIM 1 IMEI still normal...
tried changing to SIM 2, and as expected, it didnt get any signal, so cannot be used
i tried all OTA update to the latest update, and the problem still exist
so i think i should flash using Asus Flash Tools (AFT) using flash raw file so it can
fix this problem, to make the phone really like new again...
but, another problem arise...
i already prepare all driver and AFT and raw file...
in device manager, everything fine, no any yellow/red mark to any device...
boot to fastboot mode, connect the usb cable, detected in AFT and status is connected
with blue circle.
but i cannot flash when i click start, after a while, yellow circle, then red
circle with note "Flash image failure (FAILED (wrong image format))"
it failed and not flash the phone, the phone can still be used normal like nothing
happen (but still with the problem i mention )
OK, maybe, the file i downloaded corrupted, so i download again few times, but it
keep showing the same error
"Flash image failure (FAILED (wrong image format))"
i tried download other version, and error still the same
i also tried different version of AFT from 1.0.0.14 until the latest one, 1.0.0.55 ,
and still same error...
i am sure my phone is ZE550ML since in the back of the phone there is written Model :
ASUS_Z008, or am i wrong??
after that, i tried flash using ADB and zip file from asus site, with the most older
file, which is "UL-Z008-WW-2.12.40.9-user.zip" but cannot be done, it is said cannot
flash with older version than the current firmware
so i download "UL-Z008-WW-4.21.40.191-user.zip" which is marsmellow, hoping my
problem can be fix
but, the problem still exist...really exactly the same way...really confusing
tried self test again, yup, 100% still the same problem...
so now, i need advice and any info, how to flash using AFT and raw file...??
or how to fix the "Flash image failure (FAILED (wrong image format))" error.
FYI, this phone still not root or unlock bootloader (i suppose, because my sister
just use it as it is)
but i notice in fastboot mode, the "BOOTLOADER VERSION - Unknown" is it mean it
already unlock or what??
Please help me, any advice, suggestion or info highly appreciated...
thx, and sorry for the poor english writing
Click to expand...
Click to collapse
are you on M firmware ?
If yes ,factory reset in settings first
Then search ASUS support for downgrade to LP firmware for Z008(whatever that is)
put on internal sd or dload straight there. Remove ext sd btw before and
Reboot
See if that fixes your probs
edit just seen you cannot factory reset. What does work , lets start with that ?
What firmware are you currently on ?
Date build etc ?
Stock recovery installed ?
timbernot said:
are you on M firmware ?
If yes ,factory reset in settings first
Then search ASUS support for downgrade to LP firmware for Z008(whatever that is)
put on internal sd or dload straight there. Remove ext sd btw before and
Reboot
See if that fixes your probs
edit just seen you cannot factory reset. What does work , lets start with that ?
Click to expand...
Click to collapse
yes, i am on M firmware now
since i cannot flash using AFT, i tried using adb fastboot mode, and now i am on Marshmellow...
i can do factory reset, i do it few times already in backup setting and also in recovery mode...
it just that my problem/issue with No Sound when calling is still happening.
and the IMEI on SIM 2 also still unknown/null, altough this is less priority than the first problem
kim7tng said:
yes, i am on M firmware now
since i cannot flash using AFT, i tried using adb fastboot mode, and now i am on Marshmellow...
i can do factory reset, i do it few times already in backup setting and also in recovery mode...
it just that my problem/issue with No Sound when calling is still happening.
and the IMEI on SIM 2 also still unknown/null, altough this is less priority than the first problem
Click to expand...
Click to collapse
Can you factory reset in settings
Have you got stock recovery ??
You have to bare with me , my pc is upgrading and it has all my links on it
---------- Post added at 11:54 AM ---------- Previous post was at 11:42 AM ----------
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE550ML/UL-Z008-WW-52.20.40.156-user.zip
If you have stock recovery.
Download this to ext sd .
In file manager , click rename and add an extra .zip on the end ,save and reboot phone
Eg>
UL-WW- bla bla user.zip.zip
timbernot said:
What firmware are you currently on ?
Date build etc ?
Stock recovery installed ?
Click to expand...
Click to collapse
i am on stock rom, android version 6.0.1
security pacth level January 1, 2017
Baseband 1603_5.0.68.9_0810
kernel version 3.10.72-x86_64_moor-gc9c9751
build number MMB29P.WW-ASUS_Z008-4.21.40.191_20161216_7769_user060020736_201603210001
still in stock recovery because i wanna make this still just like new without any mod
kim7tng said:
i am on stock rom, android version 6.0.1
security pacth level January 1, 2017
Baseband 1603_5.0.68.9_0810
kernel version 3.10.72-x86_64_moor-gc9c9751
build number MMB29P.WW-ASUS_Z008-4.21.40.191_20161216_7769_user060020736_201603210001
still in stock recovery because i wanna make this still just like new without any mod
Click to expand...
Click to collapse
Then do as advised earlier , I linked downgrade version for you
timbernot said:
Can you factory reset in settings
Have you got stock recovery ??
You have to bare with me , my pc is upgrading and it has all my links on it
---------- Post added at 11:54 AM ---------- Previous post was at 11:42 AM ----------
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE550ML/UL-Z008-WW-52.20.40.156-user.zip
If you have stock recovery.
Download this to ext sd .
In file manager , click rename and add an extra .zip on the end ,save and reboot phone
Eg>
UL-WW- bla bla user.zip.zip
Click to expand...
Click to collapse
yes, i think i am on stock recovery, since i never flash anything except file from asus.com named "UL-Z008-WW-4.21.40.191-user.zip"
i am downloading it, using my PC.
isnt it already in .zip files?? do i need add to become "UL-Z008-WW-52.20.40.156-user.zip.zip" ??
kim7tng said:
yes, i think i am on stock recovery, since i never flash anything except file from asus.com named "UL-Z008-WW-4.21.40.191-user.zip"
i am downloading it, using my PC.
isnt it already in .zip files?? do i need add to become "UL-Z008-WW-52.20.40.156-user.zip.zip" ??
Click to expand...
Click to collapse
yes >
UL-Z008-WW-52.20.40.156-user.zip.zip
Is how it should read in file manager , you can add the .zip from pc on sd before inserting in phone too .
Reboot
timbernot said:
yes >
UL-Z008-WW-52.20.40.156-user.zip.zip
Is how it should read in file manager , you can add the .zip from pc on sd before inserting in phone too .
Reboot
Click to expand...
Click to collapse
isnt this firmware files to downgrade to Lollipop again from MM??
after downgrade, what should i do?? because i am guessing it will be the same one too...
but still i was hoping it can fix my problem...so ill do it anyway...
i thinking that flashing using AFT is the things that (maybe) can fix my problem...
kim7tng said:
isnt this firmware files to downgrade to Lollipop again from MM??
after downgrade, what should i do?? because i am guessing it will be the same one too...
but still i was hoping it can fix my problem...so ill do it anyway...
i thinking that flashing using AFT is the things that (maybe) can fix my problem...
Click to expand...
Click to collapse
Hows it going ?
You had probs flashing in AFT according to OP
timbernot said:
Hows it going ?
You had probs flashing in AFT according to OP
Click to expand...
Click to collapse
sorry for late update, have to do other things first...
so after i rename it to "UL-Z008-WW-52.20.40.156-user.zip.zip" and put in SD card,
when i turn it on, it tell me there is update from that file. well, so i OK'ed it and then it is "installing system update"
now it go back to android lollipop...and my problem still exist the exact same way...
still cannot hear sound in and out
SIM 2 IMEI still null/unknown
so, what should i do??
what is OP?? original poster, right?? thats me
btw, after updating back to lollipop, the phone still saying there is update
kim7tng said:
sorry for late update, have to do other things first...
so after i rename it to "UL-Z008-WW-52.20.40.156-user.zip.zip" and put in SD card,
when i turn it on, it tell me there is update from that file. well, so i OK'ed it and then it is "installing system update"
now it go back to android lollipop...and my problem still exist the exact same way...
still cannot hear sound in and out
SIM 2 IMEI still null/unknown
so, what should i do??
what is OP?? original poster, right?? thats me
btw, after updating back to lollipop, the phone still saying there is update
Click to expand...
Click to collapse
I think you can now rule out it being a software problem now
``btw, after updating back to lollipop, the phone still saying there is update``
Yes , is that the same file you just downgraded to or update to M ?
timbernot said:
I think you can now rule out it being a software problem now
``btw, after updating back to lollipop, the phone still saying there is update``
Yes , is that the same file you just downgraded to or update to M ?
Click to expand...
Click to collapse
so it is hardware problem??
but how?? the mic and speaker still can be use in Whatsapp, BBM and other chat apps just fine when voice call...
in selftest, i confirm it can pass, since i hear from speaker and speak through the mic just fine too...
and also i found that, if i record the call, it file cannot be played back, and yet i can record when not calling using sound recording and the file can played to just fine...
it only cannot hear or receive sound when in calling...
now, the things i not done is flashing using AFT, which cannot be done because the wrong image error...
i wonder, why?? there must be something i miss out
kim7tng said:
so it is hardware problem??
but how?? the mic and speaker still can be use in Whatsapp, BBM and other chat apps just fine when voice call...
in selftest, i confirm it can pass, since i hear from speaker and speak through the mic just fine too...
and also i found that, if i record the call, it file cannot be played back, and yet i can record when not calling using sound recording and the file can played to just fine...
it only cannot hear or receive sound when in calling...
now, the things i not done is flashing using AFT, which cannot be done because the wrong image error...
i wonder, why?? there must be something i miss out
Click to expand...
Click to collapse
AFAIK -- you would not be allowed to downgrade if something was a miss with current software(pre-flash) of the downgrade version.
Although , i would try 1.17 AFT in my unbrick thread in my signature below -- and check that you are flashing in AFT correctly by checking unbrick video from 2:17 mins in where AFT flash begins .
I did read in another thread that you stated your serial number is OK .
When you connect in AFT if serial is corrected you flash once.
If serial is 0-F, this is incorrect and you need to do a 2 part flash in AFT to correct it.
Watch the video carefully from 2:17 mins see if you are not doing something right !
Ps , are you flashing a raw file in AFT ?
Out of curiosity, what was the file you tried to flash with the asus flash tool? Was it a raw file?
Sent from my ASUS_Z00A using Tapatalk
timbernot said:
AFAIK -- you would not be allowed to downgrade if something was a miss with current software(pre-flash) of the downgrade version.
Although , i would try 1.17 AFT in my unbrick thread in my signature below -- and check that you are flashing in AFT correctly by checking unbrick video from 2:17 mins in where AFT flash begins .
I did read in another thread that you stated your serial number is OK .
When you connect in AFT if serial is corrected you flash once.
If serial is 0-F, this is incorrect and you need to do a 2 part flash in AFT to correct it.
Watch the video carefully from 2:17 mins see if you are not doing something right !
Ps , are you flashing a raw file in AFT ?
Click to expand...
Click to collapse
sorry, i kinda not understand by that...so if i can downgrade, what does that mean??
is flashing using AFT and adb sideload the same?...i though that AFT flashing flash more deeper than adbsideload or using recovery
(i mean is that AFT do flash more things than adb sideload or OTA update, )
just like XFSTK downloader that looked wayyy more deeper flash using AFT...
i said normal, because it is not "0123456789ABCDF" but "F7AZGF00N937" (which also showed in AFT)
but, after i looked closely, its SN for a brief moment, show "0123456789ABCDF" about 2-3 seconds, i dont know whats that mean...i though just a refresh...
let me show you with a video what i mean here:
https://youtu.be/ksjVDFD2V-A
i record just now, after i press power + vol up to enter fastboot mode
yes, i tried Flash rawfile in AFT...
i download few raw files like
WW_ZE550ML_2.20.40.92_20150918.raw
WW_ZE550ML_2.20.40.156_20160815.raw
WW_ZE550ML_2.20.40.155_20160713.raw
all raw file i get from here
https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966
kenbo111 said:
Out of curiosity, what was the file you tried to flash with the asus flash tool? Was it a raw file?
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
i tried flash raw file i get from here
https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966
the one from "ZF2 5,5" ZE550ML"
or maybe there another raw file i should try??
oh, i rememeber a little details
so, when i tried flash using adb side load,
when i type "adb devices" in CMD directed to specified folder it show like this:
List of devices attached
0123456789ABCDEF sideload
and yet, flashing using adb sideload finish normally without any error...(but still with the same "cant hear calling" problem )
how come it not read my correct serial number??
kim7tng said:
sorry, i kinda not understand by that...so if i can downgrade, what does that mean??
is flashing using AFT and adb sideload the same?...i though that AFT flashing flash more deeper than adbsideload or using recovery
(i mean is that AFT do flash more things than adb sideload or OTA update, )
just like XFSTK downloader that looked wayyy more deeper flash using AFT...
i said normal, because it is not "0123456789ABCDF" but "F7AZGF00N937" (which also showed in AFT)
but, after i looked closely, its SN for a brief moment, show "0123456789ABCDF" about 2-3 seconds, i dont know whats that mean...i though just a refresh...
let me show you with a video what i mean here:
https://youtu.be/ksjVDFD2V-A
i record just now, after i press power + vol up to enter fastboot mode
yes, i tried Flash rawfile in AFT...
i download few raw files like
WW_ZE550ML_2.20.40.92_20150918.raw
WW_ZE550ML_2.20.40.156_20160815.raw
WW_ZE550ML_2.20.40.155_20160713.raw
all raw file i get from here
https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966
Click to expand...
Click to collapse
Check you have driver >
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
When you press vol+ serial is corrected and you only need to flash once in AFT
AFT flash is fastboot mode flash .
Have you checked the video ? highlighted (clicked on ) your serial number, it turns blue ? before flashing
Use the AFT i have in my unbrick thread .
Also , tick erase data in AFT before hitting start :good:
AFT >
http://www.mediafire.com/file/sm76jyyz8t1axmz/AsusFlashToolInstaller_1.0.0.17.rar
Video of AFT settings and flash procedure from 2;17 mins in
https://www.youtube.com/watch?v=PmbRaJijIBs&feature=youtu.be
Note.....
If this above is done correctly then you should be-able to flash it in AFT
Downgrading from M to LP which you succeeded with checks everything re software is OK before flashing , which you succeeded with.
I notice you were worried IF the bootloader was unlocked previously in the other thread and that this maybe affecting the AFT flash .
You said you got this phone off your sister ? Does she know if she unlocked bootloader ?.
source >
https://forum.xda-developers.com/ze...ool-failed-t3574763/post71516049#post71516049
"...........
in fastboot mode, my serial number is looks normal but "bootloader version - unknown"...
i wonder if the phone bootloader have been unlock, so it cannot be flash using AFT. ..........."
Heres , what i suggest might have happened although NOT too sure.
Someone previous bricked the device.
Didnt flash or succeed to restore serial correctly ... Then used other software to create a serial number which did`nt correspond with the imei .
This is the only thing i can think of .
This doesnt explain how downgrade version succeeded though .
timbernot said:
Check you have driver >
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
When you press vol+ serial is corrected and you only need to flash once in AFT
AFT flash is fastboot mode flash .
Have you checked the video ? highlighted (clicked on ) your serial number, it turns blue ? before flashing
Use the AFT i have in my unbrick thread .
Also , tick erase data in AFT before hitting start :good:
AFT >
http://www.mediafire.com/file/sm76jyyz8t1axmz/AsusFlashToolInstaller_1.0.0.17.rar
Video of AFT settings and flash procedure from 2;17 mins in
https://www.youtube.com/watch?v=PmbRaJijIBs&feature=youtu.be
Note.....
If this above is done correctly then you should be-able to flash it in AFT
Downgrading from M to LP which you succeeded with checks everything re software is OK before flashing , which you succeeded with.
I notice you were worried IF the bootloader was unlocked previously in the other thread and that this maybe affecting the AFT flash .
You said you got this phone off your sister ? Does she know if she unlocked bootloader ?.
source >
https://forum.xda-developers.com/ze...ool-failed-t3574763/post71516049#post71516049
"...........
in fastboot mode, my serial number is looks normal but "bootloader version - unknown"...
i wonder if the phone bootloader have been unlock, so it cannot be flash using AFT. ..........."
Heres , what i suggest might have happened although NOT too sure.
Someone previous bricked the device.
Didnt flash or succeed to restore serial correctly ... Then used other software to create a serial number which did`nt correspond with the imei .
This is the only thing i can think of .
This doesnt explain how downgrade version succeeded though .
Click to expand...
Click to collapse
Yes, i have watch the video...
and yes, the State is blue circle just like in the video...
the different is that after i click start, it turns yellow for few seconds and afterthat, show red circle with error "Flash image failure (FAILED (wrong image format))"
i will show u the video when i got time to do it...but maybe tommorow, since now i got something to do...
i am not in a hurry after all, and i really thankfull you helping me sharing your knowledge...
i wonder because the the stock bootloader version said unknown...i am guessing, with normal phone everything should have some status or whatever, right?? maybe some number or code...
what is the status with normal phone looked like?? or is it normal for un-mod phone to have bootloader version unknown??
i cannot compare to other phone, because i only got this 1 phone...
can you show me what the normal fastboot mode looked like?? with all other status, so i can get more picture of it
yes, i got this from my sister...and i believe she doesnt know anything like this...she is just pure user type, know what i mean, right...
but i dont know if she ever bring this phone to the service or not, i gonna ask her next time i meet her...she is not in the same house with me...
and she bought this phone brandnew from official store, i believe...
and the serial number detected on AFT is the same as number in the back of the phone, which is "F7AZGF00N937"
and also, as far as i know, this phone never bricked (this bricked mean you cannot enter the OS to use the phone, right? like bootloop or cannot start at all)

Categories

Resources