Is there a way to get the Sony walkman EQ working with spotify on the OP3?, im running on Community build 3.5.3 with root and Xposed.
Also, I got V4A running and working but I get these anoying sound pops and cracks whenever the phone is under minimum load and it gets worse when on heavier load (Using fingerprintscanner, opening apps, playing videos) It doesn't occur when the phone is stand-by, anyone know how to fix this?
Thanks in advance!
Anthony1396 said:
Is there a way to get the Sony walkman EQ working with spotify on the OP3?, im running on Community build 3.5.3 with root and Xposed.
Also, I got V4A running and working but I get these anoying sound pops and cracks whenever the phone is under minimum load and it gets worse when on heavier load (Using fingerprintscanner, opening apps, playing videos) It doesn't occur when the phone is stand-by, anyone know how to fix this?
Thanks in advance!
Click to expand...
Click to collapse
Where did you find the Sony Walkman with its EQ for our device?
I did not, that's why I'm curious if it's even possible
Anthony1396 said:
I did not, that's why I'm curious if it's even possible
Click to expand...
Click to collapse
Well in the good old days there was a version from @ibanez7 that was working fine on my Nexus 5...but unfortunately it's outdated...then there is a version from @androidexpert35 http://forum.xda-developers.com/android/software/mod-xperia-x-premium-walkman-clearaudio-t3373553 but unfortunately for me it never worked on any device...now all the sound mod developers claim that there are Sony Libraries in a lot of mods (particularly based on V4A) but unfortunately i never "heard" again the real clear audio like @ibanez7 version...
I had the same problem. Just install kernel audiutor and put the minimum cpu frequency to 480mhz and also apply the settings on boot.
Anthony1396 said:
Is there a way to get the Sony walkman EQ working with spotify on the OP3?, im running on Community build 3.5.3 with root and Xposed.
Also, I got V4A running and working but I get these anoying sound pops and cracks whenever the phone is under minimum load and it gets worse when on heavier load (Using fingerprintscanner, opening apps, playing videos) It doesn't occur when the phone is stand-by, anyone know how to fix this?
Thanks in advance!
Click to expand...
Click to collapse
Are you using standalone v4a or some mod like divine beats/arise. On the latter two, turn off Dolby Atmos app and you won't get crackling. Tested myself
Or you can use ondemand governor instead of interactive. That will also solve the issue.
androidexpert35 said:
Hey guys! Can you tell me what's the problem of my Walkman port on your OP3? I don't own the device so I couldn't test it well.
Inviato dal mio E6653 utilizzando Tapatalk
Click to expand...
Click to collapse
I actually haven't installed it, I wil probably try it if I can't get v4a working properly
ungeeked said:
Are you using standalone v4a or some mod like divine beats/arise. On the latter two, turn off Dolby Atmos app and you won't get crackling. Tested myself
Or you can use ondemand governor instead of interactive. That will also solve the issue.
Click to expand...
Click to collapse
I will try those solutions immediately at the gym, I will let you know if it works!
Anthony1396 said:
I will try those solutions immediately at the gym, I will let you know if it works!
Click to expand...
Click to collapse
Unfortunately both options did not work, I changed my governor to ondemand in kernel aduitor and turned Dolby Atmos off in Settings-Apps-Dolby Atmos-force stop and disable.
I'm using the divine version of v4a I think
lansyer said:
I had the same problem. Just install kernel audiutor and put the minimum cpu frequency to 480mhz and also apply the settings on boot.
Click to expand...
Click to collapse
This didn't work unfortunately...
Anthony1396 said:
This didn't work unfortunately...
Click to expand...
Click to collapse
Which ROM/kernel are you using?
I have tested divine beats 7.5 on stock 3.2.6 and it worked fine on several music players. I don't know about the latest 8.0 though.
Currently I'm using ARISE Deuteronomy but that won't work on stock kernel.
Try dirty flashing your ROM which will remove all sound mods. See if the problem persists. Then flash Divine and test again with only Dolby or only viper app turned on
ungeeked said:
Which ROM/kernel are you using?
I have tested divine beats 7.5 on stock 3.2.6 and it worked fine on several music players. I don't know about the latest 8.0 though.
Currently I'm using ARISE Deuteronomy but that won't work on stock kernel.
Try dirty flashing your ROM which will remove all sound mods. See if the problem persists. Then flash Divine and test again with only Dolby or only viper app turned on
Click to expand...
Click to collapse
Im running stock kernel with community build 3.5.3
Anthony1396 said:
Im running stock kernel with community build 3.5.3
Click to expand...
Click to collapse
It is possible that CB could cause the problem. CB have different kernels than stock ROMs. But it is highly unlikely.
Anyways try dirty flashing CB again and see
ungeeked said:
It is possible that CB could cause the problem. CB have different kernels than stock ROMs. But it is highly unlikely.
Anyways try dirty flashing CB again and see
Click to expand...
Click to collapse
I won't lose any data right?
Anthony1396 said:
I won't lose any data right?
Click to expand...
Click to collapse
Apps and data will remain. You'll lose root, xposed and anything you have flashed.
Still it's a good idea to backup anything important.
Install busybox before flashing sound mod
ungeeked said:
Apps and data will remain. You'll lose root, xposed and anything you have flashed.
Still it's a good idea to backup anything important.
Install busybox before flashing sound mod
Click to expand...
Click to collapse
I got the 3.5.4 ota update, I will let you know it is works
ungeeked said:
Apps and data will remain. You'll lose root, xposed and anything you have flashed.
Still it's a good idea to backup anything important.
Install busybox before flashing sound mod
Click to expand...
Click to collapse
Just dirty flashed 3.5.4 and now v4a isn't working at all, updated the app and reinstalled de driver but nothing seems to work...
Anthony1396 said:
Just dirty flashed 3.5.4 and now v4a isn't working at all, updated the app and reinstalled de driver but nothing seems to work...
Click to expand...
Click to collapse
Go to TWRP. Wipe > advanced wipe > and wipe system, dalvik and cache.
This will remove the ROM, any system apps or previous mods etc. Your apps are in data partition and images videos etc are internal storage partition. Don't wipe them.
Dirty flash ROM and reboot. You will have to go through the setup and fill in data for Google accounts just like after factory reset. However all your apps and data will be there. Check if there is any v4a/Dolby app. Uninstall it.
Reboot to twrp and install SuperSU 2.78. Reboot to system. Go to play store and download busybox. Open the app and install busybox.
Reboot to recovery and flash divine beats.
Reboot to system. You'll have Dolby Atmos and v4a apps. Enable either one of them and you should be fine
ungeeked said:
Go to TWRP. Wipe > advanced wipe > and wipe system, dalvik and cache.
This will remove the ROM, any system apps or previous mods etc. Your apps are in data partition and images videos etc are internal storage partition. Don't wipe them.
Dirty flash ROM and reboot. You will have to go through the setup and fill in data for Google accounts just like after factory reset. However all your apps and data will be there. Check if there is any v4a/Dolby app. Uninstall it.
Reboot to twrp and install SuperSU 2.78. Reboot to system. Go to play store and download busybox. Open the app and install busybox.
Reboot to recovery and flash divine beats.
Reboot to system. You'll have Dolby Atmos and v4a apps. Enable either one of them and you should be fine
Click to expand...
Click to collapse
Thanks you so much, it works perfect now, sounds crystal clear without the pops and crackles!
Related
Hello
I flashed on my N5X stock images of January upadte and tried to root and install xposed. So i flashed franco.kernel r2, rooted systemlessly with no proble, no FCs. And then when I flashed xposed got I FCs on Calc, Downloads and Bluetooth. It'đ normal (I hope no ) Had anyone problem like me?
domicq said:
Hello
I flashed on my N5X stock images of January upadte and tried to root and install xposed. So i flashed franco.kernel r2, rooted systemlessly with no proble, no FCs. And then when I flashed xposed got I FCs on Calc, Downloads and Bluetooth. It'đ normal (I hope no ) Had anyone problem like me?
Click to expand...
Click to collapse
For me xposed is a hit and miss. But I blame the modules more then xposed itself. It always boot up fine by itself. I guess it is just the modules that needs to be made working better with 6.0.1
Clearing cashe fixes the boot loop i get stuck in some times. Other times I need to disable the xposed conf file. and it boots up again with no active modules.
No FC.
frewys said:
For me xposed is a hit and miss. But I blame the modules more then xposed itself. It always boot up fine by itself. I guess it is just the modules that needs to be made working better with 6.0.1
Clearing cashe fixes the boot loop i get stuck in some times. Other times I need to disable the xposed conf file. and it boots up again with no active modules.
No FC.
Click to expand...
Click to collapse
I just installed Xposed, without any module active and i have those FCs.
domicq said:
I just installed Xposed, without any module active and i have those FCs.
Click to expand...
Click to collapse
I am running stock with no FC.
Make a clean redo.
Preferably flash the clean install straight from google with all the right updated radio and vendor etc and try again.
frewys said:
I am running stock with no FC.
Make a clean redo.
Preferably flash the clean install straight from google with all the right updated radio and vendor etc and try again.
Click to expand...
Click to collapse
I do clean install two times have you encrytped data?
domicq said:
I do clean install two times have you encrytped data?
Click to expand...
Click to collapse
Not encrypted. But I think it should work anyway.
Try without.
Are you flashing through ADB or through recovery?
frewys said:
Not encrypted. But I think it should work anyway.
Try without.
Are you flashing through ADB or through recovery?
Click to expand...
Click to collapse
Rom through fastboot, anything else through recovery.
Gesendet von meinem Nexus 5X mit Tapatalk
N5X encrypted running the latest image + xposed v79. No issues at all. I would advise clearing cache/dalvik via recovery to force recompiling of the apps.
Calculator was crashing for me, so I believe I finally just deleted it from /system/app, reinstalled it, and it's been fine ever since.
C3C076 said:
N5X encrypted running the latest image + xposed v79. No issues at all. I would advise clearing cache/dalvik via recovery to force recompiling of the apps.
Click to expand...
Click to collapse
Omg man! i was clearing cache and dalvik but before installing xposed, i was stupid. nvm. thank you:good:
I've been trying to get Viper4Android driver installed but it keeps failing.
I've tested CM11 and Stock but no go when I hit install driver. I'm guessing it may have something to do with SE Linux as I have to set it to permissive but haven't had any luck with trying to change it as apps do not detect it.
Just looking to see if anyone else had any luck with the app on their Fire Phone?
I had it working without problems on CM-11. SELinux is disabled on that ROM, so no drawback here, no need to change anything...
Before I annoy you with more stories, tell us which file you used exactly to install V4A on your device.
I had to use SELinuxModeChanger on other devices (they used "enforcing") because they didn't offer a setting to change the SELinux mode.
Bingo Bronson said:
I had it working without problems on CM-11. SELinux is disabled on that ROM, so no drawback here...
Before I annoy you with more stories, tell us which file you used exactly to install V4A on your device.
Click to expand...
Click to collapse
I've reviewed the following thread
http://forum.xda-developers.com/showthread.php?t=2191223
I've tested 2.4.0.1 & 2.3.4.0 but can't install the driver. I have BusyBox Pro installed and running and reviewed the logs in SuperSU but i have no idea whats going on when I try the driver install.
Screenshot of Super SU Log: http://postimg.org/image/wdhvthr73/
I am currently back on CM-11 if you have any steps for me to try...
Kerrona said:
I have BusyBox Pro installed and running [...] I am currently back on CM-11 if you have any steps for me to try...
Click to expand...
Click to collapse
Hm, well that's interesting... I also used Stericson's busybox (non pro) and it worked right away... (I also used "ViPER4Android_FX_v2401_A4.x-A6.x.apk")
Maybe reinstall busybox... why isn't it able to find the "toolbox" / why is it calling the path with failsafe?
I see you have some security / privacy / permission tools running... can't really vouch for a hassle free install in such an environment.
You could try to flash this zip from safestrap recovery, this worked for me on other devices and the driver is already integrated, no need for a separate install from within the app.
This has something to do with superSU Binaries updated from normal method, if you have updated super su from playstore then you have to wipe the system partition reflash the rom and latest superSU zip. Otherwise you can flash the pre-build V4a zip as suggested above.
Thanks guys.
I got the driver installed and enabled now with the flash version.
Will probably wipe and start fresh and try the apk again.
Hey All,
I was messing around with V4A and now the BoomSound toggle in settings does not work. After installing V4Android, I decided to uninstall it as it just seemed too complicated and cumbersome. After uninstalling with Titanium backup and rebooting, I found that the boomsound feature no longer does anything when I toggle between theater mode and music mode. The status changes, but the sound stays the same. Is there an apk floating around that I can flash to restore this function?
AliLaPointe said:
Hey All,
I was messing around with V4A and now the BoomSound toggle in settings does not work. After installing V4Android, I decided to uninstall it as it just seemed too complicated and cumbersome. After uninstalling with Titanium backup and rebooting, I found that the boomsound feature no longer does anything when I toggle between theater mode and music mode. The status changes, but the sound stays the same. Is there an apk floating around that I can flash to restore this function?
Click to expand...
Click to collapse
Try reflashing rom.
schmeggy929 said:
Try reflashing rom.
Click to expand...
Click to collapse
Schmeggy to the rescue! Looks like you keep bailing me out of crazy situations. I'm currently on the stock rom after taking the 1.8 update. Is there a way to dirty flash over my current setup and keep my data?
AliLaPointe said:
Schmeggy to the rescue! Looks like you keep bailing me out of crazy situations. I'm currently on the stock rom after taking the 1.8 update. Is there a way to dirty flash over my current setup and keep my data?
Click to expand...
Click to collapse
yes download one of the stock roms from http://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257.
Just flash in recovery no wipe.
schmeggy929 said:
yes download one of the stock roms from http://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257.
Just flash in recovery no wipe.
Click to expand...
Click to collapse
These are all for the sprint variant though. I'm on the Unlocked US version.
Found the fix - restored stock system.
As title says, anyone get viper4android installed and working with the OP3 and OOS 3.1.3?
I keep getting crashes and system lock ups after flashing Viper4Android 5.4 stock. I soft bricked it once and had to flash stock once when my prior Nandroid Backup failed. So hopefully someone gotten it to work.
vision33r said:
I keep getting crashes and system lock ups after flashing Viper4Android 5.4 stock. I soft bricked it once and had to flash stock once when my prior Nandroid Backup failed. So hopefully someone gotten it to work.
Click to expand...
Click to collapse
Yeah, same here. I am playing with it now. Not sure if I will figure anything out...
vision33r said:
I keep getting crashes and system lock ups after flashing Viper4Android 5.4 stock. I soft bricked it once and had to flash stock once when my prior Nandroid Backup failed. So hopefully someone gotten it to work.
Click to expand...
Click to collapse
Can you try this (I am not available to test it right now). Install Busy Box (https://play.google.com/store/apps/details?id=ru.meefik.busybox&hl=fi) and ensure that you install Busy Box via the app. Then flash the attached zip. It *should* work...
dustintinsley said:
Can you try this (I am not available to test it right now). Install Busy Box (https://play.google.com/store/apps/details?id=ru.meefik.busybox&hl=fi) and ensure that you install Busy Box via the app. Then flash the attached zip. It *should* work...
Click to expand...
Click to collapse
I just tried, my phone rebooted 30 seconds after the boot.
I could go into Viper and it wasn't working, still "abnormal".
All the applications that use the audio are now lagging and FCing...
Audio doesn't work anymore , I restore my backup ^^
Letin69 said:
I just tried, my phone rebooted 30 seconds after the boot.
I could go into Viper and it wasn't working, still "abnormal".
All the applications that use the audio are now lagging and FCing...
Audio doesn't work anymore , I restore my backup ^^
Click to expand...
Click to collapse
Well that stinks. I will keep playing around with it once I get home...
dustintinsley said:
Well that stinks. I will keep playing around with it once I get home...
Click to expand...
Click to collapse
Okay, tell me if you want that I test it
Letin69 said:
Okay, tell me if you want that I test it
Click to expand...
Click to collapse
Found a missing file, maybe this will work if you can test
I had bootloop by flashing V4A.zip...tried to install V4A.apk along with viper fix.apk and works flawlessly
I'll definitely try it out tomorrow. Done wiping my phone over and over. Did Nandroid backup twice and both restores failed. There's something about the Oxygen OS that is checking and is not backed up. Flashing the stock rom fixes it but loses root.
I did have BusyBox installed when I flashed V4A 5.4 stock and boot looped. I will try the V4A fix. The only thing is that if you flash V4A.zip, it causes the phone to become unstable.
Do I flash the V4A Fix after V4A.zip or boot into rom then apply the apk??
hunhool said:
I had bootloop by flashing V4A.zip...tried to install V4A.apk along with viper fix.apk and works flawlessly
Click to expand...
Click to collapse
Where is this v4a fix? can you post it here?
http://forum.xda-developers.com/showthread.php?t=3403304
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
vision33r said:
I'll definitely try it out tomorrow. Done wiping my phone over and over. Did Nandroid backup twice and both restores failed. There's something about the Oxygen OS that is checking and is not backed up. Flashing the stock rom fixes it but loses root.
I did have BusyBox installed when I flashed V4A 5.4 stock and boot looped. I will try the V4A fix. The only thing is that if you flash V4A.zip, it causes the phone to become unstable.
Do I flash the V4A Fix after V4A.zip or boot into rom then apply the apk??
Click to expand...
Click to collapse
Letin69 said:
Okay, tell me if you want that I test it
Click to expand...
Click to collapse
One more test. Made a small change. Also, once you install, you will get the initial freeze after boot up. I got a prompt asking me to wait or stop process. i stopped the process. once system is somewhat stable, install the viper fix.apk, restart and let me know. it seems to be working on mine....
dustintinsley said:
One more test. Made a small change. Also, once you install, you will get the initial freeze after boot up. I got a prompt asking me to wait or stop process. i stopped the process. once system is somewhat stable, install the viper fix.apk, restart and let me know. it seems to be working on mine....
Click to expand...
Click to collapse
tested on mine. didn't work. Thanks for your effort to fix it for us, though.
OK, I got viper working just fine. At first I thought it was my SuperSU version, so I downgraded to 2.67 (which did fix my es file explorer root issue). However, the driver would never install. What did work, was my selinux mode. After changing to permissive, viper works perfectly. So this is an issue with the app itself. I'm sure there are other work arounds with enforced mode, but I don't care. Lol. Also, I simply installed the apk directly from vipers page, enabled the driver, reboot, and voila! No flashing anything, or messing with anything other than the selinux mode. And I am on stock oxygenOS
Viper apk: http://vipersaudio.com/swupdate/viper4android/download.html
Selinux mode changer: http://forum.xda-developers.com/showthread.php?t=2524485
js042507 said:
OK, I got viper working just fine. At first I thought it was my SuperSU version, so I downgraded to 2.67 (which did fix my es file explorer root issue). However, the driver would never install. What did work, was my selinux mode. After changing to permissive, viper works perfectly. So this is an issue with the app itself. I'm sure there are other work arounds with enforced mode, but I don't care. Lol. Also, I simply installed the apk directly from vipers page, enabled the driver, reboot, and voila! No flashing anything, or messing with anything other than the selinux mode. And I am on stock oxygenOS
Viper apk: http://vipersaudio.com/swupdate/viper4android/download.html
Selinux mode changer: http://forum.xda-developers.com/showthread.php?t=2524485
Click to expand...
Click to collapse
I got it to install using this but it does not work as far as i can tell. is it actually working for you?
vision33r said:
I keep getting crashes and system lock ups after flashing Viper4Android 5.4 stock. I soft bricked it once and had to flash stock once when my prior Nandroid Backup failed. So hopefully someone gotten it to work.
Click to expand...
Click to collapse
Letin69 said:
I just tried, my phone rebooted 30 seconds after the boot.
I could go into Viper and it wasn't working, still "abnormal".
All the applications that use the audio are now lagging and FCing...
Audio doesn't work anymore , I restore my backup ^^
Click to expand...
Click to collapse
Letin69 said:
Okay, tell me if you want that I test it
Click to expand...
Click to collapse
vision33r said:
I'll definitely try it out tomorrow. Done wiping my phone over and over. Did Nandroid backup twice and both restores failed. There's something about the Oxygen OS that is checking and is not backed up. Flashing the stock rom fixes it but loses root.
I did have BusyBox installed when I flashed V4A 5.4 stock and boot looped. I will try the V4A fix. The only thing is that if you flash V4A.zip, it causes the phone to become unstable.
Do I flash the V4A Fix after V4A.zip or boot into rom then apply the apk??
Click to expand...
Click to collapse
Ok, I think this is it! Reworked the entire package, updated the audio effects. This should be working now. Please let me know. This should work after flash and installing the drivers.
dustintinsley said:
Ok, I think this is it! Reworked the entire package, updated the audio effects. This should be working now. Please let me know. This should work after flash and installing the drivers.
Click to expand...
Click to collapse
Those who tested, still getting a boot loop or is it working?
dustintinsley said:
Ok, I think this is it! Reworked the entire package, updated the audio effects. This should be working now. Please let me know. This should work after flash and installing the drivers.
Click to expand...
Click to collapse
I get an error 6 when i try to install via TWRP.
rm5 said:
I get an error 6 when i try to install via TWRP.
Click to expand...
Click to collapse
well, that's no good i will take a look at the updater script. do you get any output before the error? i installed manually so trying to figure out the script error
I am not responsible for any bricked devices. Install at your own risk!
This is experimental so please post any bugs you find.
SCREENSHOTS
What doesn't work:
I haven't found anything so far that seems to be broken. Doesn't mean it's bug-free though.
How to install:
1. Factory Reset
2. Format Data
3. Flash rom <-- Download
4. Flash GAPPS
5. Flash Magisk [optional]
6. Reboot to system
Enjoy.
I tried to install the ROM to my SM-T560NU, it boots with no issues. It's very laggy to use, so I mess around with crDroid settings and I changed the scrolling cache setting (Settings->crDroid Settings->User Interface->Animations->Scrolling Cache) from Default enable to Default disable, it fixed the laggy issue.
I also tried to flash Vince2678's overclock kernel and it boots with no issues.
This is the Bomb. I have a Tab E TM-560NU. I failed miserably trying to install other roms. But yours went in 1st shot. Nice work!
Question is I'm thinking about putting Magisk, But do I really need it? Is that like SU? Probably a very dumb question.
This rom is for Android 7?
zeovani said:
This rom is for Android 7?
Click to expand...
Click to collapse
>Android Pie
Sorry bud this an android 9 rom lol
edwardnizz said:
This is the Bomb. I have a Tab E TM-560NU. I failed miserably trying to install other roms. But yours went in 1st shot. Nice work!
Click to expand...
Click to collapse
I've experience of flashing my tablet so I can flash my tablet without issues. Since it's too laggy to use, so I switched to LightningFastROM 17.1, for now.
If you had issues of flashing the ROM, I recommend to use this version of TWRP:
https://msm8916.com/?view=downloads&dist_name_short=TWRP&codename=gtelwifiue
edwardnizz said:
Question is I'm thinking about putting Magisk, But do I really need it? Is that like SU? Probably a very dumb question.
Click to expand...
Click to collapse
It's your choice whenever you want to use Magisk or not. If you want Busybox, ViPER4Android FX,etc... or other apps that requires root then you'll need to flash Magisk in order to use it.
Tickbaby said:
I am not responsible for any bricked devices. Install at your own risk!
This is experimental so please post any bugs you find.
SCREENSHOTS
What doesn't work:
I haven't found anything so far that seems to be broken. Doesn't mean it's bug-free though.
How to install:
1. Factory Reset
2. Format Data
3. Flash rom <-- Download
4. Flash GAPPS
5. Flash Magisk [optional]
6. Reboot to system
Enjoy.
Click to expand...
Click to collapse
download link for the rom is broken :/
Fruse said:
I've experience of flashing my tablet so I can flash my tablet without issues. Since it's too laggy to use, so I switched to LightningFastROM 17.1, for now.
If you had issues of flashing the ROM, I recommend to use this version of TWRP:
https://msm8916.com/?view=downloads&dist_name_short=TWRP&codename=gtelwifiue
It's your choice whenever you want to use Magisk or not. If you want Busybox, ViPER4Android FX,etc... or other apps that requires root then you'll need to flash Magisk in order to use it.
Click to expand...
Click to collapse
I just installed liightningfast. It turns out, I forgot to wipe data the first time i tried. Thanks a bunch. Now i have a few choices! Dude your the BOMB!!
One Questions Dev's and Fellow members Can this rom be flashed on SM T561 too ?
running on the sm-t560nu well. no lag issues, doesn't pass safety net though. not that big of deal, was just hoping magisk hide worked. Did you by chance add in the patch (or is this even applicable) found here: https://github.com/kdrag0n/safetynet-fix/tree/master/patches/9/sys
malfuncion said:
running on the sm-t560nu well. no lag issues, doesn't pass safety net though. not that big of deal, was just hoping magisk hide worked. Did you by chance add in the patch (or is this even applicable) found here: https://github.com/kdrag0n/safetynet-fix/tree/master/patches/9/sys
Click to expand...
Click to collapse
i used super su to root
I have found a bug. When using stock screen recorder with puting only record internal audio, if u have headphones connected it freaks out. Plz don't mind the video, I clicked on it for representation of the issue.