Hello
I flashed on my N5X stock images of January upadte and tried to root and install xposed. So i flashed franco.kernel r2, rooted systemlessly with no proble, no FCs. And then when I flashed xposed got I FCs on Calc, Downloads and Bluetooth. It'đ normal (I hope no ) Had anyone problem like me?
domicq said:
Hello
I flashed on my N5X stock images of January upadte and tried to root and install xposed. So i flashed franco.kernel r2, rooted systemlessly with no proble, no FCs. And then when I flashed xposed got I FCs on Calc, Downloads and Bluetooth. It'đ normal (I hope no ) Had anyone problem like me?
Click to expand...
Click to collapse
For me xposed is a hit and miss. But I blame the modules more then xposed itself. It always boot up fine by itself. I guess it is just the modules that needs to be made working better with 6.0.1
Clearing cashe fixes the boot loop i get stuck in some times. Other times I need to disable the xposed conf file. and it boots up again with no active modules.
No FC.
frewys said:
For me xposed is a hit and miss. But I blame the modules more then xposed itself. It always boot up fine by itself. I guess it is just the modules that needs to be made working better with 6.0.1
Clearing cashe fixes the boot loop i get stuck in some times. Other times I need to disable the xposed conf file. and it boots up again with no active modules.
No FC.
Click to expand...
Click to collapse
I just installed Xposed, without any module active and i have those FCs.
domicq said:
I just installed Xposed, without any module active and i have those FCs.
Click to expand...
Click to collapse
I am running stock with no FC.
Make a clean redo.
Preferably flash the clean install straight from google with all the right updated radio and vendor etc and try again.
frewys said:
I am running stock with no FC.
Make a clean redo.
Preferably flash the clean install straight from google with all the right updated radio and vendor etc and try again.
Click to expand...
Click to collapse
I do clean install two times have you encrytped data?
domicq said:
I do clean install two times have you encrytped data?
Click to expand...
Click to collapse
Not encrypted. But I think it should work anyway.
Try without.
Are you flashing through ADB or through recovery?
frewys said:
Not encrypted. But I think it should work anyway.
Try without.
Are you flashing through ADB or through recovery?
Click to expand...
Click to collapse
Rom through fastboot, anything else through recovery.
Gesendet von meinem Nexus 5X mit Tapatalk
N5X encrypted running the latest image + xposed v79. No issues at all. I would advise clearing cache/dalvik via recovery to force recompiling of the apps.
Calculator was crashing for me, so I believe I finally just deleted it from /system/app, reinstalled it, and it's been fine ever since.
C3C076 said:
N5X encrypted running the latest image + xposed v79. No issues at all. I would advise clearing cache/dalvik via recovery to force recompiling of the apps.
Click to expand...
Click to collapse
Omg man! i was clearing cache and dalvik but before installing xposed, i was stupid. nvm. thank you:good:
Related
Yesterday I installed Xposer Framework, everything ok. then I installed a module wanam xpose, everything ok then I tried xBackground everything ok with that too but today I was playing with xBackground (changing options,apply, rebooting) one moment the phone stopped working, not opening apps so I rebooted it but after a couple of minutes after booting stops working again this all over again.
So I did a wipe cache/ data reset then the phone works but after 2-3 hours it keep stopping nothing works this all over again and again.
Please tell me how to fix this
manuel1992 said:
Yesterday I installed Xposer Framework, everything ok. then I installed a module wanam xpose, everything ok then I tried xBackground everything ok with that too but today I was playing with xBackground (changing options,apply, rebooting) one moment the phone stopped working, not opening apps so I rebooted it but after a couple of minutes after booting stops working again this all over again.
So I did a wipe cache/ data reset then the phone works but after 2-3 hours it keep stopping nothing works this all over again and again.
Please tell me how to fix this
Click to expand...
Click to collapse
install the rom you are using again with full wipe
or
flash stock rom (reboot)> flash custom recovery > install desired rom and take care how are you playing with wanam
cosmyndemeter said:
install the rom you are using again with full wipe
or
flash stock rom (reboot)> flash custom recovery > install desired rom and take care how are you playing with wanam
Click to expand...
Click to collapse
ok thank you I installed again the stock rom with odin, now root is broken the procedure to re-root is still the same?.
You think wanam was the cause of that problem?
manuel1992 said:
ok thank you I installed again the stock rom with odin, now root is broken the procedure to re-root is still the same?.
You think wanam was the cause of that problem?
Click to expand...
Click to collapse
yes, procedure to root is the same
i can't say that the wanam was the problem, i only ask you to be attention with the modifications you make
read more about wanam here
cosmyndemeter said:
yes, procedure to root is the same
i can't say that the wanam was the problem, i only ask you to be attention with the modifications you make
read more about wanam here
Click to expand...
Click to collapse
I think the cause was the xbackground cause I used wanam for 1 day and nothing happened (I kinda liked the different design of my notification).
To be sure now I will do a nandroid backup with TWRP
Thank you
As title says, anyone get viper4android installed and working with the OP3 and OOS 3.1.3?
I keep getting crashes and system lock ups after flashing Viper4Android 5.4 stock. I soft bricked it once and had to flash stock once when my prior Nandroid Backup failed. So hopefully someone gotten it to work.
vision33r said:
I keep getting crashes and system lock ups after flashing Viper4Android 5.4 stock. I soft bricked it once and had to flash stock once when my prior Nandroid Backup failed. So hopefully someone gotten it to work.
Click to expand...
Click to collapse
Yeah, same here. I am playing with it now. Not sure if I will figure anything out...
vision33r said:
I keep getting crashes and system lock ups after flashing Viper4Android 5.4 stock. I soft bricked it once and had to flash stock once when my prior Nandroid Backup failed. So hopefully someone gotten it to work.
Click to expand...
Click to collapse
Can you try this (I am not available to test it right now). Install Busy Box (https://play.google.com/store/apps/details?id=ru.meefik.busybox&hl=fi) and ensure that you install Busy Box via the app. Then flash the attached zip. It *should* work...
dustintinsley said:
Can you try this (I am not available to test it right now). Install Busy Box (https://play.google.com/store/apps/details?id=ru.meefik.busybox&hl=fi) and ensure that you install Busy Box via the app. Then flash the attached zip. It *should* work...
Click to expand...
Click to collapse
I just tried, my phone rebooted 30 seconds after the boot.
I could go into Viper and it wasn't working, still "abnormal".
All the applications that use the audio are now lagging and FCing...
Audio doesn't work anymore , I restore my backup ^^
Letin69 said:
I just tried, my phone rebooted 30 seconds after the boot.
I could go into Viper and it wasn't working, still "abnormal".
All the applications that use the audio are now lagging and FCing...
Audio doesn't work anymore , I restore my backup ^^
Click to expand...
Click to collapse
Well that stinks. I will keep playing around with it once I get home...
dustintinsley said:
Well that stinks. I will keep playing around with it once I get home...
Click to expand...
Click to collapse
Okay, tell me if you want that I test it
Letin69 said:
Okay, tell me if you want that I test it
Click to expand...
Click to collapse
Found a missing file, maybe this will work if you can test
I had bootloop by flashing V4A.zip...tried to install V4A.apk along with viper fix.apk and works flawlessly
I'll definitely try it out tomorrow. Done wiping my phone over and over. Did Nandroid backup twice and both restores failed. There's something about the Oxygen OS that is checking and is not backed up. Flashing the stock rom fixes it but loses root.
I did have BusyBox installed when I flashed V4A 5.4 stock and boot looped. I will try the V4A fix. The only thing is that if you flash V4A.zip, it causes the phone to become unstable.
Do I flash the V4A Fix after V4A.zip or boot into rom then apply the apk??
hunhool said:
I had bootloop by flashing V4A.zip...tried to install V4A.apk along with viper fix.apk and works flawlessly
Click to expand...
Click to collapse
Where is this v4a fix? can you post it here?
http://forum.xda-developers.com/showthread.php?t=3403304
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
vision33r said:
I'll definitely try it out tomorrow. Done wiping my phone over and over. Did Nandroid backup twice and both restores failed. There's something about the Oxygen OS that is checking and is not backed up. Flashing the stock rom fixes it but loses root.
I did have BusyBox installed when I flashed V4A 5.4 stock and boot looped. I will try the V4A fix. The only thing is that if you flash V4A.zip, it causes the phone to become unstable.
Do I flash the V4A Fix after V4A.zip or boot into rom then apply the apk??
Click to expand...
Click to collapse
Letin69 said:
Okay, tell me if you want that I test it
Click to expand...
Click to collapse
One more test. Made a small change. Also, once you install, you will get the initial freeze after boot up. I got a prompt asking me to wait or stop process. i stopped the process. once system is somewhat stable, install the viper fix.apk, restart and let me know. it seems to be working on mine....
dustintinsley said:
One more test. Made a small change. Also, once you install, you will get the initial freeze after boot up. I got a prompt asking me to wait or stop process. i stopped the process. once system is somewhat stable, install the viper fix.apk, restart and let me know. it seems to be working on mine....
Click to expand...
Click to collapse
tested on mine. didn't work. Thanks for your effort to fix it for us, though.
OK, I got viper working just fine. At first I thought it was my SuperSU version, so I downgraded to 2.67 (which did fix my es file explorer root issue). However, the driver would never install. What did work, was my selinux mode. After changing to permissive, viper works perfectly. So this is an issue with the app itself. I'm sure there are other work arounds with enforced mode, but I don't care. Lol. Also, I simply installed the apk directly from vipers page, enabled the driver, reboot, and voila! No flashing anything, or messing with anything other than the selinux mode. And I am on stock oxygenOS
Viper apk: http://vipersaudio.com/swupdate/viper4android/download.html
Selinux mode changer: http://forum.xda-developers.com/showthread.php?t=2524485
js042507 said:
OK, I got viper working just fine. At first I thought it was my SuperSU version, so I downgraded to 2.67 (which did fix my es file explorer root issue). However, the driver would never install. What did work, was my selinux mode. After changing to permissive, viper works perfectly. So this is an issue with the app itself. I'm sure there are other work arounds with enforced mode, but I don't care. Lol. Also, I simply installed the apk directly from vipers page, enabled the driver, reboot, and voila! No flashing anything, or messing with anything other than the selinux mode. And I am on stock oxygenOS
Viper apk: http://vipersaudio.com/swupdate/viper4android/download.html
Selinux mode changer: http://forum.xda-developers.com/showthread.php?t=2524485
Click to expand...
Click to collapse
I got it to install using this but it does not work as far as i can tell. is it actually working for you?
vision33r said:
I keep getting crashes and system lock ups after flashing Viper4Android 5.4 stock. I soft bricked it once and had to flash stock once when my prior Nandroid Backup failed. So hopefully someone gotten it to work.
Click to expand...
Click to collapse
Letin69 said:
I just tried, my phone rebooted 30 seconds after the boot.
I could go into Viper and it wasn't working, still "abnormal".
All the applications that use the audio are now lagging and FCing...
Audio doesn't work anymore , I restore my backup ^^
Click to expand...
Click to collapse
Letin69 said:
Okay, tell me if you want that I test it
Click to expand...
Click to collapse
vision33r said:
I'll definitely try it out tomorrow. Done wiping my phone over and over. Did Nandroid backup twice and both restores failed. There's something about the Oxygen OS that is checking and is not backed up. Flashing the stock rom fixes it but loses root.
I did have BusyBox installed when I flashed V4A 5.4 stock and boot looped. I will try the V4A fix. The only thing is that if you flash V4A.zip, it causes the phone to become unstable.
Do I flash the V4A Fix after V4A.zip or boot into rom then apply the apk??
Click to expand...
Click to collapse
Ok, I think this is it! Reworked the entire package, updated the audio effects. This should be working now. Please let me know. This should work after flash and installing the drivers.
dustintinsley said:
Ok, I think this is it! Reworked the entire package, updated the audio effects. This should be working now. Please let me know. This should work after flash and installing the drivers.
Click to expand...
Click to collapse
Those who tested, still getting a boot loop or is it working?
dustintinsley said:
Ok, I think this is it! Reworked the entire package, updated the audio effects. This should be working now. Please let me know. This should work after flash and installing the drivers.
Click to expand...
Click to collapse
I get an error 6 when i try to install via TWRP.
rm5 said:
I get an error 6 when i try to install via TWRP.
Click to expand...
Click to collapse
well, that's no good i will take a look at the updater script. do you get any output before the error? i installed manually so trying to figure out the script error
Is there a way to get the Sony walkman EQ working with spotify on the OP3?, im running on Community build 3.5.3 with root and Xposed.
Also, I got V4A running and working but I get these anoying sound pops and cracks whenever the phone is under minimum load and it gets worse when on heavier load (Using fingerprintscanner, opening apps, playing videos) It doesn't occur when the phone is stand-by, anyone know how to fix this?
Thanks in advance!
Anthony1396 said:
Is there a way to get the Sony walkman EQ working with spotify on the OP3?, im running on Community build 3.5.3 with root and Xposed.
Also, I got V4A running and working but I get these anoying sound pops and cracks whenever the phone is under minimum load and it gets worse when on heavier load (Using fingerprintscanner, opening apps, playing videos) It doesn't occur when the phone is stand-by, anyone know how to fix this?
Thanks in advance!
Click to expand...
Click to collapse
Where did you find the Sony Walkman with its EQ for our device?
I did not, that's why I'm curious if it's even possible
Anthony1396 said:
I did not, that's why I'm curious if it's even possible
Click to expand...
Click to collapse
Well in the good old days there was a version from @ibanez7 that was working fine on my Nexus 5...but unfortunately it's outdated...then there is a version from @androidexpert35 http://forum.xda-developers.com/android/software/mod-xperia-x-premium-walkman-clearaudio-t3373553 but unfortunately for me it never worked on any device...now all the sound mod developers claim that there are Sony Libraries in a lot of mods (particularly based on V4A) but unfortunately i never "heard" again the real clear audio like @ibanez7 version...
I had the same problem. Just install kernel audiutor and put the minimum cpu frequency to 480mhz and also apply the settings on boot.
Anthony1396 said:
Is there a way to get the Sony walkman EQ working with spotify on the OP3?, im running on Community build 3.5.3 with root and Xposed.
Also, I got V4A running and working but I get these anoying sound pops and cracks whenever the phone is under minimum load and it gets worse when on heavier load (Using fingerprintscanner, opening apps, playing videos) It doesn't occur when the phone is stand-by, anyone know how to fix this?
Thanks in advance!
Click to expand...
Click to collapse
Are you using standalone v4a or some mod like divine beats/arise. On the latter two, turn off Dolby Atmos app and you won't get crackling. Tested myself
Or you can use ondemand governor instead of interactive. That will also solve the issue.
androidexpert35 said:
Hey guys! Can you tell me what's the problem of my Walkman port on your OP3? I don't own the device so I couldn't test it well.
Inviato dal mio E6653 utilizzando Tapatalk
Click to expand...
Click to collapse
I actually haven't installed it, I wil probably try it if I can't get v4a working properly
ungeeked said:
Are you using standalone v4a or some mod like divine beats/arise. On the latter two, turn off Dolby Atmos app and you won't get crackling. Tested myself
Or you can use ondemand governor instead of interactive. That will also solve the issue.
Click to expand...
Click to collapse
I will try those solutions immediately at the gym, I will let you know if it works!
Anthony1396 said:
I will try those solutions immediately at the gym, I will let you know if it works!
Click to expand...
Click to collapse
Unfortunately both options did not work, I changed my governor to ondemand in kernel aduitor and turned Dolby Atmos off in Settings-Apps-Dolby Atmos-force stop and disable.
I'm using the divine version of v4a I think
lansyer said:
I had the same problem. Just install kernel audiutor and put the minimum cpu frequency to 480mhz and also apply the settings on boot.
Click to expand...
Click to collapse
This didn't work unfortunately...
Anthony1396 said:
This didn't work unfortunately...
Click to expand...
Click to collapse
Which ROM/kernel are you using?
I have tested divine beats 7.5 on stock 3.2.6 and it worked fine on several music players. I don't know about the latest 8.0 though.
Currently I'm using ARISE Deuteronomy but that won't work on stock kernel.
Try dirty flashing your ROM which will remove all sound mods. See if the problem persists. Then flash Divine and test again with only Dolby or only viper app turned on
ungeeked said:
Which ROM/kernel are you using?
I have tested divine beats 7.5 on stock 3.2.6 and it worked fine on several music players. I don't know about the latest 8.0 though.
Currently I'm using ARISE Deuteronomy but that won't work on stock kernel.
Try dirty flashing your ROM which will remove all sound mods. See if the problem persists. Then flash Divine and test again with only Dolby or only viper app turned on
Click to expand...
Click to collapse
Im running stock kernel with community build 3.5.3
Anthony1396 said:
Im running stock kernel with community build 3.5.3
Click to expand...
Click to collapse
It is possible that CB could cause the problem. CB have different kernels than stock ROMs. But it is highly unlikely.
Anyways try dirty flashing CB again and see
ungeeked said:
It is possible that CB could cause the problem. CB have different kernels than stock ROMs. But it is highly unlikely.
Anyways try dirty flashing CB again and see
Click to expand...
Click to collapse
I won't lose any data right?
Anthony1396 said:
I won't lose any data right?
Click to expand...
Click to collapse
Apps and data will remain. You'll lose root, xposed and anything you have flashed.
Still it's a good idea to backup anything important.
Install busybox before flashing sound mod
ungeeked said:
Apps and data will remain. You'll lose root, xposed and anything you have flashed.
Still it's a good idea to backup anything important.
Install busybox before flashing sound mod
Click to expand...
Click to collapse
I got the 3.5.4 ota update, I will let you know it is works
ungeeked said:
Apps and data will remain. You'll lose root, xposed and anything you have flashed.
Still it's a good idea to backup anything important.
Install busybox before flashing sound mod
Click to expand...
Click to collapse
Just dirty flashed 3.5.4 and now v4a isn't working at all, updated the app and reinstalled de driver but nothing seems to work...
Anthony1396 said:
Just dirty flashed 3.5.4 and now v4a isn't working at all, updated the app and reinstalled de driver but nothing seems to work...
Click to expand...
Click to collapse
Go to TWRP. Wipe > advanced wipe > and wipe system, dalvik and cache.
This will remove the ROM, any system apps or previous mods etc. Your apps are in data partition and images videos etc are internal storage partition. Don't wipe them.
Dirty flash ROM and reboot. You will have to go through the setup and fill in data for Google accounts just like after factory reset. However all your apps and data will be there. Check if there is any v4a/Dolby app. Uninstall it.
Reboot to twrp and install SuperSU 2.78. Reboot to system. Go to play store and download busybox. Open the app and install busybox.
Reboot to recovery and flash divine beats.
Reboot to system. You'll have Dolby Atmos and v4a apps. Enable either one of them and you should be fine
ungeeked said:
Go to TWRP. Wipe > advanced wipe > and wipe system, dalvik and cache.
This will remove the ROM, any system apps or previous mods etc. Your apps are in data partition and images videos etc are internal storage partition. Don't wipe them.
Dirty flash ROM and reboot. You will have to go through the setup and fill in data for Google accounts just like after factory reset. However all your apps and data will be there. Check if there is any v4a/Dolby app. Uninstall it.
Reboot to twrp and install SuperSU 2.78. Reboot to system. Go to play store and download busybox. Open the app and install busybox.
Reboot to recovery and flash divine beats.
Reboot to system. You'll have Dolby Atmos and v4a apps. Enable either one of them and you should be fine
Click to expand...
Click to collapse
Thanks you so much, it works perfect now, sounds crystal clear without the pops and crackles!
Looking for an root hide app that works on 4.0.1....
Caused a bootloop for me
kpmohamedhussain said:
Looking for an root hide app that works on 4.0.1....
Click to expand...
Click to collapse
I tried it with stock OOS 4.0.1 and FreedomOS 2.1.1 (based in 4.0.1). In both cases I got bootloop . So, it doesn't work at all.
I have tried all methods developed till now and there is only one which can work with 4.0.1 rom. This is installing Magisk v9.0 (v10.2 doesn't work) and Phh's Superuser. You can see here...
https://www.google.es/amp/www.thean...less-interface-android/amp/?client=ms-unknown
Using this method I passed SafetyNet but from that moment, Supersu didn't work correctly. I couldn't install Supersu binaries when it asked me. In any case, this method forces you to reboot your device everytime you need to hide the root so, that's not an easy way to pay by phone. Therefore, I restore my nandroid again. However, if you need it to play Pokémon, you can use it.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Crazyhat said:
I tried it with stock OOS 4.0.1 and FreedomOS 2.1.1 (based in 4.0.1). In both cases I got bootloop . So, it doesn't work at all.
I have tried all methods developed till now and there is only one which can work with 4.0.1 rom. This is installing Magisk v9.0 (v10.2 doesn't work) and Phh's Superuser. You can see here...
https://www.google.es/amp/www.thean...less-interface-android/amp/?client=ms-unknown
Using this method I passed SafetyNet but from that moment, Supersu didn't work correctly. I couldn't install Supersu binaries when it asked me. In any case, this method forces you to reboot your device everytime you need to hide the root so, that's not an easy way to pay by phone. Therefore, I restore my nandroid again. However, if you need it to play Pokémon, you can use it.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Click to expand...
Click to collapse
10.2 works for me with no problems and safetynet pass. I use phh su.
cohaolain said:
10.2 works for me with no problems and safetynet pass. I use phh su.
Click to expand...
Click to collapse
Hi, would you mind sharing your details and method used to achieve this. OS/Rom you're using etc...
I couldn't do it but I guess a stock system is necessary. I'd be very interested, thanx in advance.
kpmohamedhussain said:
Looking for an root hide app that works on 4.0.1....
Click to expand...
Click to collapse
It caused a bootloop. Restored to normal after flashing the "rm" version (removes the suhide).
cohaolain said:
10.2 works for me with no problems and safetynet pass. I use phh su.
Click to expand...
Click to collapse
Can you tell me please what's your rom and what steps did you take to make the installation?
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
FlyingMachete said:
Hi, would you mind sharing your details and method used to achieve this. OS/Rom you're using etc...
I couldn't do it but I guess a stock system is necessary. I'd be very interested, thanx in advance.
Click to expand...
Click to collapse
Crazyhat said:
Can you tell me please what's your rom and what steps did you take to make the installation?
Click to expand...
Click to collapse
Just flashed the file and it just worked. I'd been on an older version beforehand though. On Oxygen OS 4.0.1 currently, with phh su.
[/COLOR]
cohaolain said:
Just flashed the file and it just worked. I'd been on an older version beforehand though. On Oxygen OS 4.0.1 currently, with phh su.
Click to expand...
Click to collapse
Sorry, but that doesn't help us too much.
Can you describe step by step, how did you install Magisk and Phh SuperUser in rom 4.0.1?
I have done it in different ways and it fails in many cases so, it is not as easy as you say. We would need the details of a better explanation.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Crazyhat said:
[/COLOR]
Sorry, but that doesn't help us too much.
Can you describe step by step, how did you install Magisk and Phh SuperUser in rom 4.0.1?
I have done it in different ways and it fails in many cases so, it is not as easy as you say. We would need the details of a better explanation.
Click to expand...
Click to collapse
Would be more specific if I could mate, but I just flashed as I would any other zip. Using bluespark's latest TWRP (although it worked on others before) after a clean install (but has also worked for me if it wasn't a clean install).
I wiped data, system and cache, flashed oxygenos, flashed magisk (which automatically installs phh now), flashed some other mods I use (aptX, emojis). I rebooted and it worked fine.
Dm-verity might be causing you problems, but I don't know much about it and can't help you here. Mine has never been an issue because of whatever way I originally got to Nougat and rooted (with SuperSU I think). But try some of the dm-verity tutorials on here and see if they help. I think I read somewhere that it caused bootloops if TWRP was granted permission to modify the system partition. They will wipe your phone, however.
cohaolain said:
Would be more specific if I could mate, but I just flashed as I would any other zip. Using bluespark's latest TWRP (although it worked on others before) after a clean install (but has also worked for me if it wasn't a clean install).
I wiped data, system and cache, flashed oxygenos, flashed magisk (which automatically installs phh now), flashed some other mods I use (aptX, emojis). I rebooted and it worked fine.
Dm-verity might be causing you problems, but I don't know much about it and can't help you here. Mine has never been an issue because of whatever way I originally got to Nougat and rooted (with SuperSU I think). But try some of the dm-verity tutorials on here and see if they help. I think I read somewhere that it caused bootloops if TWRP was granted permission to modify the system partition. They will wipe your phone, however.
Click to expand...
Click to collapse
Ok, thank you so much, mate. Actually, I never got dm-verity issue. The only different thing I did regarding your method was a dirty installation instead of a clean installation of the rom. I suppose it was the cause of some problems I had with Supersu.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
I can't open the WeChat app with my phone. I'm running sultan kernel and have magisk flashed. I've tried downloading older APK but nothing seems to work
harryfornasier said:
I can't open the WeChat app with my phone. I'm running sultan kernel and have magisk flashed. I've tried downloading older APK but nothing seems to work
Click to expand...
Click to collapse
Did it work before you rooted?
Badger50 said:
Did it work before you rooted?
Click to expand...
Click to collapse
Yeah it did, I tried unlocking the bootloader setting it all up and then rooting but it still just doesn't open
harryfornasier said:
Yeah it did, I tried unlocking the bootloader setting it all up and then rooting but it still just doesn't open
Click to expand...
Click to collapse
What version of magisk are you using? There are some apps out there that don't play nice with root. You may also try clearing WeChat app cache and data. You have magisk hide enabled as well?
Badger50 said:
What version of magisk are you using? There are some apps out there that don't play nice with root. You may also try clearing WeChat app cache and data. You have magisk hide enabled as well?
Click to expand...
Click to collapse
It's version 16 and yeah I tried magisk hide and clearing cache before and it didn't seem to do anything, it just refuses to launch
harryfornasier said:
It's version 16 and yeah I tried magisk hide and clearing cache before and it didn't seem to do anything, it just refuses to launch
Click to expand...
Click to collapse
Try toggling magisk hide off then try your app again, or uninstall/reinstall your app, or try magisk 16.4 beta, or possibly a different kernel. You may have to flash the stock boot.img again to remove root to see if that brings the app functionality back. Then sign into the app(if necessary) then try magisk 16.4.
Badger50 said:
Try toggling magisk hide off then try your app again, or uninstall/reinstall your app, or try magisk 16.4 beta, or possibly a different kernel. You may have to flash the stock boot.img again to remove root to see if that brings the app functionality back. Then sign into the app(if necessary) then try magisk 16.4.
Click to expand...
Click to collapse
Can boot.img be flashed in twrp or do I need a computer?
harryfornasier said:
Can boot.img be flashed in twrp or do I need a computer?
Click to expand...
Click to collapse
You can flash it in twrp if you have extracted it from the factory image and transferred it to your phones internal storage.