Hello,
First, my note 2 stuck at boot logo.
When i try to enter recovery stuck about 15 seconds on logo after that says with red failed to mount /efs (no such file or directory) ; failed to mount /system (no such file or directory); failed to mount /cache (no such file or directory) ; failed to mount /cacahe/recovery/last_recovery (no such file or directory) ; failed to mount /data (no such file or directory).
I read that it would be something about a "rescue fireware" was a topic on the XDA forum but no link was not working.
Please help me fast!
Thx!
alex2003881 said:
Hello,
First, my note 2 stuck at boot logo.
When i try to enter recovery stuck about 15 seconds on logo after that says with red failed to mount /efs (no such file or directory) ; failed to mount /system (no such file or directory); failed to mount /cache (no such file or directory) ; failed to mount /cacahe/recovery/last_recovery (no such file or directory) ; failed to mount /data (no such file or directory).
I read that it would be something about a "rescue fireware" was a topic on the XDA forum but no link was not working.
Please help me fast!
Thx!
Click to expand...
Click to collapse
Same happened to my phone too and no luck. still stuck! Someone help please!
If you can boot into Odin mode, flash a stock rom from sammobile.com.
audit13 said:
If you can boot into Odin mode, flash a stock rom from sammobile.com.
Click to expand...
Click to collapse
I tryed this no result
What happened when you used Odin? Post the Odin log?
audit13 said:
What happened when you used Odin? Post the Odin log?
Click to expand...
Click to collapse
Nand write fail. Or Sometimes, complete write operation failed!
audit13 said:
What happened when you used Odin? Post the Odin log?
Click to expand...
Click to collapse
When i try to put rescue firware with odin says setup connection after that fail.
Tomorrow i'm going to samsung official service.
I'll comeback with edit!
karanvirkohli said:
Nand write fail. Or Sometimes, complete write operation failed!
Click to expand...
Click to collapse
What does the log actually say? It probably failed when trying to flash a certain file.
Did you try different USB cables and USB ports?
Flash repair firmware
4 file
Sent from my GT-N7100 using Tapatalk
Hey, sorry for hijacking your thread.
I have the same problem. I tried many different scenarios and I couldn't fix it. I gave up and went to Samsung and after 48hs I called finding out that they refused to fix it. Talked to the IT guy and he said he has no idea how to fix it and told me the only fix is to change the whole motherboard and he said its not suggested to do so as its expensive. I have no idea what I should do. I flashed custom recovery, stock recovery. Tried to separate the whole firmware and flash it piece by piece using the skipsoft tool. I tried flashing PIT files with custom recovery, stock recovery, stock rom I have tried multiple PIT files from multiple websites.
This happens when I try flashing stock rom downloaded by samfirm or sammobile.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100OJVFOD1_N7100XXUFOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
If I to flash a PIT file using any of the scenarios mentioned above I get this ( the 4 files repair rom in this example )
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
It will keep doing this forever until I unplug the cable. I'm running stock Kitkat 4.4.2 but all methods I find are for older versions with different bootloaders yet I still tried them as there are no recent fix from what I can find.
In the first situation, the sboot.bin causes an error because the bootloader in the ROM is older than the phone's current bootloader.
Did you try flashing the latest stock ROM from sammobile.com using Odin 3.07 in the PDA slot? Sammobile.com ROMs should only be unzipped once to yield a tar.md5 file and flashed in the PDA slot.
Tried different USB cables and USB ports?
audit13 said:
In the first situation, the sboot.bin causes an error because the bootloader in the ROM is older than the phone's current bootloader.
Did you try flashing the latest stock ROM from sammobile.com using Odin 3.07 in the PDA slot? Sammobile.com ROMs should only be unzipped once to yield a tar.md5 file and flashed in the PDA slot.
Tried different USB cables and USB ports?
Click to expand...
Click to collapse
Yes I did all that. Same error. If I extract the tar file and do another odin flashable tar using skipsoft tool it doesnt work, removing one file at a time didnt work either. I tried the latest on sammobile, the latest on sammobile for my country, and the latest from Samfirm for my country. I also tried using SmartSwitch and Kies recovery using the serial number and model number and they don't recognise the phone during downloading like about 60% of downloading it will show an error that it doesnt recognise it.
When flashing the sammobile.com tar.md5 file in Odin's PDA/AP slot, do you receive an error message? If yes, what is the error?
audit13 said:
When flashing the sammobile.com tar.md5 file in Odin's PDA/AP slot, do you receive an error message? If yes, what is the error?
Click to expand...
Click to collapse
Same exact error of post #10
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100OJVFOD1_N7100XXUFOA1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
The ROM being flashed has a bootloader that is too old or the ROM is not meant for the phone.
The model # for the phone has been confirmed as being a gt-n7100 on the Odin screen?
audit13 said:
The ROM being flashed has a bootloader that is too old or the ROM is not meant for the phone.
The model # for the phone has been confirmed as being a gt-n7100 on the Odin screen?
Click to expand...
Click to collapse
Odin screen that is in download mode ? Yes it says GT-N7100.
You're using the latest ROM for the phone? Which country?
audit13 said:
You're using the latest ROM for the phone? Which country?
Click to expand...
Click to collapse
Yes. Egypt. I have used both latest on sammobile and download by using samfirm. I have tried both of them. I have tried indian and few other countries all lead to the same error.
Are you using the original Samsung cable?
audit13 said:
Are you using the original Samsung cable?
Click to expand...
Click to collapse
It is not the one that came with the phone but it is one that I bought from Samsung. I also tried few other cables that came with LG and Asus phones.
Related
Hiii!!!
My Name is Adonis and i'm Italian Boy ^_^ Best fan for The GREAT JOB of This Site! i Vey Vey Love XDA! *_*
Mhhhh...but I try to ask your help..... :good: Pleasssseeeeee
I have the Some Problem with My NEW Samsung Galaxy Note 2....................
I recently installed a Root Permissions on Original Firmware, and I then installed a Custom Rom (I am Italian so I chose an Italian ROM COOKED ^ _ ^) of cis80. Up to yesterday's .. All okay!
For a Stroke, unfortunately, the phone started to reboot without any reason, and the last time it was restarted .. in a like Boot Loop... O_O The Phone Locked on screen "Samsung Galaxy Note 2 N7100" Without going on Next Logo of Loading (As Default What Samsung).
I've tried EVERYTHING .. but really .. I say to ALL! But nothing to do ..... What is the only one that I can to enter into "Download Mode" .. with Odin I've tried everything but everything I always returns "FAIL" or "Error Pit" & more .... or another Error. Also NAND Erase, nothing nothing... :_(
AIUTOOOOO!! I do not know Do! I have the Note 2 to 10 days c.a. ... and now I can't use it ..... My Beast is Down...
First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya
Kashamalaga said:
First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya
Click to expand...
Click to collapse
Ok Thanks.
But i Try....and i don't have any solution.
i tried load a Stock ROM with ODIN....but i have a Error....Because i have a "Error with a Table Partition"... "Error with Pit File"....i try load a Pit file, but not load anything.... can i do?
This is un example of report of ODIN:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXALIH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100OXXALJ1_BTU_CSC_factory.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Click to expand...
Click to collapse
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
Click to expand...
Click to collapse
Adonis4U said:
This is un example of report of ODIN:
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
Click to expand...
Click to collapse
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium
szymi22 said:
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...
Adonis4U said:
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...
Click to expand...
Click to collapse
Try 1.85 odin and if that wont help try to download non italian rom, uk one works for me before when i fixed my friend note 2
Sent from my GT-N7100 using xda premium
You try
1. download Stock ROM file
2. Use Odin 3.07 (recommend)
3. Open Odin (on computer use normal harddisk. Not solid stat drive,SSD) check Auto Reboot and F. rest Time and Nand Erase All OR Repartition (If you have PIT file)
4. Check PDA and select Stock ROM (your downloaded)
5. Start
6. Finished Flash Rom. You Remove USB and restart Your phone will stop at samsung logo. Never mine. You restart again (Hold power button). Enter stock recovery mode (Vol Up + Home + power button).Your Phone show error can't read data.
7. In stock recovery menu. You check wipe cache. and wipe cache+factory reset. and restart your phone.
8. Your phone may come back normal.
good luck.
So, my friend updated their S4 Mini GT-I9195 to Android version 4.4.2 Kitkat. The phone shut down twice after the update and is no longer able to boot up. So they gave me it to see what I can do. I've tried going to Odin mode, Recovery. But none of it works. I've also tried using QPST, but I'm unable to find .hex or .mbn file for it. So I tried the one for the required MSM8930 chipset. Sadly, the QPST cannot connect to my phone. Is there anything else I could do to revive it without having to JTAG it or something? Please help.
EDIT: I've managed to run it in Odin mode by using debrick.img flash into SD Card, however.. after trying to flash recovery. Odin returns:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1100)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010>
<ID:0/010> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Any ideas?
I tried to flash Samsung Galaxy note 2 Gt-N7100 firmware N7100XXUFNL1_N7100ODDFNI1_N7100DDUFND1_HOME.tar.md5 using odin version 1.85 ,3.07 , 3.09 , 3.12 .3 but i am getting Fail as odin status i found that i need to flash pit file so , i flashed pit PIT_N7100_16GB_20121102.pit along with it but still getting status as Fail .Then i tried flashing twrp too but still status is fail
odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I have TWRP recovery installed but i am unable to mount .
Internal storage , External sd card ,OTG are showing 0mb.When i boot into twrp a to3g window opens in to my laptop.
Please help me fix this.
Try flashing without pit file. Try different USB cables and USB ports.
audit13 said:
Try flashing without pit file. Try different USB cables and USB ports.
Click to expand...
Click to collapse
i have tried flashing without pit file , tried another usb cable and another ports too but still it's not working.Please help me
Bruh can your please share this topic with others too?
where you found that PIT file so i can try this too
janezz2 said:
where you found that PIT file so i can try this too
Click to expand...
Click to collapse
I googled "pit file for note 2 n7100" .
When you try to flash the phone with Odin and no pit file, what errors appear in the Odin log? Did you confirm the model # in download mode?
Post the Odin log when a flash fails. These logs can provide clues as to what's causing the problem.
audit13 said:
When you try to flash the phone with Odin and no pit file, what errors appear in the Odin log? Did you confirm the model # in download mode?
Post the Odin log when a flash fails. These logs can provide clues as to what's causing the problem.
Click to expand...
Click to collapse
odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try flashing without repartitioning.
Tried different USB cables and USB ports.
audit13 said:
Try flashing without repartitioning.
Tried different USB cables and USB ports.
Click to expand...
Click to collapse
how
Flash the stock rom from Sammobile.com using Odin without a pit file.
audit13 said:
Flash the stock rom from Sammobile.com using Odin without a pit file.
Click to expand...
Click to collapse
same error did not work
Hello,
I am unable to flash stock firmware back to my J200GU with Odin since it always gives me a fail.
So I was trying to flash directly on TWRP or ADB sideload but I always get an error with my zip firmwares.
Does anyone knows where to get the zip firmwares ready for ADB sideload or TWRP?
Sorry if it is a stupid question but I am really newb on this.
Thanks.
use noblerom/hydrarom meta-inf folder in your rom.
RevolverRz said:
use noblerom/hydrarom meta-inf folder in your rom.
Click to expand...
Click to collapse
I have tried what you recomended and TWRP proceeds to install hydrarom, however it is installed very fast and when it reboots i am stuck at bootloop. I believe it has sucessfully installed hydra but not the stock rom I wanted.
I have currently no OS on my phone or any firmaware so my guess is that to be able to install this custom roms (hydra and noble) i need to already have a stock firmware an this will be just an add on. Correct me if I am wrong.
Are the firmwares from SAMMOBILE ready to be used on TWRP? I am starting to think the are not to be used on TWRP but ODIN instead, but ODIN always gives me a fail. SO my question is: IS there a way to make roms downloaded from SAMMOBILE install on TWRP or adb sideload? Any guide about this?
Thanks. I appreciate any help since I have my J2 completly useless now
Can you post your Odin log?
or use the 4 files repair firmware.
https://www.androidfilehost.com/?fid=24407100847293886
RevolverRz said:
Can you post your Odin log?
or use the 4 files repair firmware.
https://www.androidfilehost.com/?fid=24407100847293886
Click to expand...
Click to collapse
Just tried the repair files and got this error on ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any more suggestions?
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
Means this rom is not for you j200gu.
Use the most recent version of rom from here..
http://updato.com/firmware-archive-select-model?q=SM-J200GU&rpp=15&order=date&dir=desc&exact=1
pic upload edit
This is my phone. It was bought in Thailand and its dual sim. I am not sure which is the correct firmware for my phone since its dual sim. Can anyone guide me?
RevolverRz said:
Can you post your Odin log?
or use the 4 files repair firmware.
https://www.androidfilehost.com/?fid=24407100847293886
Click to expand...
Click to collapse
Thank you! Finally!
I have tried flashing using just the AP file instead of all 4 files and it worked. When I tried to use the 4 files together in Odin it failed but instead using only the AP I was able to install the firmware and get a PASS.
Thanks alot for all the help in this forum
sushyoshi said:
Thank you! Finally!
I have tried flashing using just the AP file instead of all 4 files and it worked. When I tried to use the 4 files together in Odin it failed but instead using only the AP I was able to install the firmware and get a PASS.
Thanks alot for all the help in this forum
Click to expand...
Click to collapse
Glad to hear that
FRP/FAP Locked
RevolverRz said:
Glad to hear that
Click to expand...
Click to collapse
I accidentally turned off the oem unlocking in dev options(couple of hours earlier) and then when i tried to change my emoticon pack it says FAP Lock. Thank you so much!!! :good: :highfive: (I use Samsung J200GU)
using a note 2 today and it just decided to reboot on its own, and then never got passed the splash screen. i have twrp recovery installed. booted into recovery and couldnt do anything. couldn't mount anything, wipe anything, restore anything. all storage showed 0MB. kept giving errors that it couldn't mount any partitions (cache, system, etc.) something with error 16.
i tried flashing a stock rom with odin. that failed. just seems like it is totally corrupted and nothing can be written to it.
how does something like that happen just randomly???? any way back from the dead?
Is the phone an AT&T Note 2? Where did you find the stock ROM for Odin?
audit13 said:
Is the phone an AT&T Note 2? Where did you find the stock ROM for Odin?
Click to expand...
Click to collapse
yes AT&T note 2.
the stock rom i got from a link on this forum. i tried this one first, I317-UCUCNJ2-Stock.tar.md5, then this one I317-UCUCNE5-Stock.tar.md5
also tried re-partitioning after with this pit file, i317.pit
i tried using Odin v1.85 and Odin 3.07
What is the error message in the Odin log?
Tried using different usb cables and usb ports with Odin?
audit13 said:
What is the error message in the Odin log?
Tried using different usb cables and usb ports with Odin?
Click to expand...
Click to collapse
just tried it, same result. odin log? you mean the message output? here it is for when i tried with and without PIT file
Code:
[B]No pit file[/B]
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317-UCUCNE5-Stock.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
[B]With pit file[/B]
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317-UCUCNE5-Stock.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
Without the pit file, it's failing with the boot.img file and this may be fixed by using an oem Samsung cable or different usb 2.0 port. It could also be that the bootloader in the rom is not for the phone or the phone's current bootloader is newer than the bootloader being fished.
audit13 said:
Without the pit file, it's failing with the boot.img file and this may be fixed by using an oem Samsung cable or different usb 2.0 port. It could also be that the bootloader in the rom is not for the phone or the phone's current bootloader is newer than the bootloader being fished.
Click to expand...
Click to collapse
tried different cables and ports and another ROM, I317UCAMA4.. still fails.
i think it's a lost cause.
I'm sure you are correct but this phone shows up as an sgh-i317 in download mode?
Where did you get the ROMs? AT&T never released an Odin-flashable ROM after 4.1.2.
audit13 said:
I'm sure you are correct but this phone shows up as an sgh-i317 in download mode?
Where did you get the ROMs? AT&T never released an Odin-flashable ROM after 4.1.2.
Click to expand...
Click to collapse
yes it shows as sgh-i317 when in download mode
roms were gotten from wherever one gets roms i guess