So I have this Sprint Note 4. Haven't used it in forever since I got the Note 5. Anyway, so when I try to turn it on, it doesn't turn on, and the charging indicator doesn't turn on when plugged in. When I plug it in my PC it shows up as "Qualcomm HS-USB QDLoader 9008 (COM10)".... I read somewhere that apparently it's hard bricked and I need a debrick file to get it working again. Now I found some random files somewhere, so I decided to put them on the SD card. The phone vibrated, but didn't do anything, now it wont do anything anymore..
Can someone guide me and/or provide me with the proper debrick files for my Sprint Note 4?
Related
hello,
i flashed a custom kernel to my d855 that is on lollipop and everything went good until i wanted to reboot to twrp to flash a zip, it never turned back on... no led no logo nothing... only when i pull the battery out and i plug it to usb i get the battery missing logo. when i put the battery back it goes black screen,not even back lit, like it is turned off. when i plug it in my pc i get the "lge android net usb serial port" in devices manager, i tried to flash a kdz but it doesnt work, it gets stuck at 4 percent, and the tot file wont even start it gives me an error straight away.
i wanted to use QDLoader and boardiag to unbrick it but i never managed to get the driver working, i never get the qualcomm hs usb loader 9008 in device manager. what can i do ? i'm kinda stck this never happenend to me...
thank you
Plurant said:
hello,
i flashed a custom kernel to my d855 that is on lollipop and everything went good until i wanted to reboot to twrp to flash a zip, it never turned back on... no led no logo nothing... only when i pull the battery out and i plug it to usb i get the battery missing logo. when i put the battery back it goes black screen,not even back lit, like it is turned off. when i plug it in my pc i get the "lge android net usb serial port" in devices manager, i tried to flash a kdz but it doesnt work, it gets stuck at 4 percent, and the tot file wont even start it gives me an error straight away.
i wanted to use QDLoader and boardiag to unbrick it but i never managed to get the driver working, i never get the qualcomm hs usb loader 9008 in device manager. what can i do ? i'm kinda stck this never happenend to me...
thank you
Click to expand...
Click to collapse
What do you mean by you can't get the driver for Qualcomm 9008 mode?
Sent from my LG-D800 using Tapatalk
I have the same problem with my LG. It has red LDI, but I think that's the battery problem. Try to change it.
if you unplug the battery, and put it back in, then hold the up button while plugging in the usb cable, can you get into Qualcom mode? I bricked my phone last week and i was able to get into qualcom mode that way. I then also installed the qualcom drivers and rebooted my pc. I used boarddiag by Willcracker and was able to recover my phone to a boot loop which allowed me to get into Download mode, which I was able to recover the phone back to stock.
Not working for me, still LGE USB Net. When I test point my G3, Windows show notification 'Not recognized'
Hello
My galaxy (i9192) just went dead. No custom roms or anything. It was working ok until battery discharged. Now it has 2,8V and wont charge.
Ive tried debrick images found here but none of them worked. Only "life sign" form this phone is QHSUSB device that showed up as Qualcomm HS-USB QDLoader 9008 after drivers installation.
Do you have any suggestions what else i can try?
Thanks in advance
Maybe your emmc get corrupted
Just like that?
BTW: if ive got debrick img flashed on the sd card and battery is discharged how should i turn it on? Using wall charger or connect it to pc? Should i press some buttons combination or it should boot itself automatically?
If emmc is corrupted and phone finds boot on sd card shouldn't it boot anyway?
Hi,
My fiancé's s4 mini was found switched off about a week ago. Since then it will not charge or turn on - it always stays in black screen. Samsung support wants £125 to replace the motherboard and they say they cannot recover the data. I am more interested in recovering the contacts/any useful data from the phone rather than making it work again.
When connected to computer it will be detected as "relink hs-usb qdloader 9008". If an SD card is inserted with the various debrick images posted in the forums it will vibrate and boot, print REBOOTING after WRITE 139008 and it will keep rebooting and do the same all the time.
Phone was never rooted. It has received successfully all Samsung updates. QFIL detects the port but fails to flash the phone with 'Sahara fail' Samsung Kies / Odin do not detect the phone at all.
Any suggestions on how to proceed are greatly appreciated. I do suspect that perhaps I may need a more recent debrick.img but could be wrong. Or as Samsung says the motherboard is completely dead and unrecoverable..
Thanks!
One fine morning I woke up and found the S4 mini dead. I assumed it was just the battery discharged but it would not charge after plugging in.
When plugged in to USB it shows the QHSUSB_DLOAD so I installed the Qualcomm QDLoader drivers.
But I cannot get the device to Download mode.
JIG did not work, neither did the debrick image. The 3 key combination does not work either.
If I press the Power key when plugged in to USB, I can see the Qualcomm device getting disappear and reappears in a few seconds.
Any other suggestions to revive the phone?
Thanks.
Bump
Exactly the same problem happened to me yesterday
Mine is a I9195
Hi guys,
I am not sure what exactly happened. I was sitting around and listening to some music when my old Nexus 5X suddenly rebooted and stayed blank.
First guess - Battery. But that turned out to be quite wrong as I had charged it over night. Tried to get into fastboot mode or recovery mode; After the logo showing up and my beloved "This device isn't trusted" sign the screen went completely blank and that was the last sign of life. As it's got an USB port, I hooked the device up to a computer, found it to identify as "Qualcomm HS-USB QDLoader 9008".
Some research showed me that this is some kind of download mode, in terms of 'nothing works anymore' and you'd have to get your hands really dirty here to get at least somewhere.
So my educated guess would be bad memory or some corrupted filesystem and I'd have to reinitialize the phone to be able to fastboot or anything.
Tools already looked at:
LGUP - No joy; Device not found as this one requires something like a basic recovery mode which seems to be broken here
boarddiag - I was able to read from the memory using 'download' using a tot file I found somewhere online.
QPST - Found some prog_emmc_firehose_8992_lite_lge.mbn file, but I lack the patch and raw program files
Any ideas out there getting that bugger alive again?
Cheers
Rei
This is not a sign of download mode, your device hardbricked. As you have the firehose (I don't know if should work this) I found from another thread there the other files for QPST. I didn't tried that because this was released after I send my 5x to service (yes, for second time) due to hardbrick . https://drive.google.com/file/d/0B5EP5AzZNQxPcE52QWw2VloteUU/view