My Samsung galaxy s 4 mini bricked it self apparently. STOCK ROM 4.2.2
It was rooted nothing more, only some small mods for the framework.
put my phone to charge and went to sleep. was late to because the alarm didn't ring. i took my phone to check why it didn't ring, and nothing. no light, no sound nothing. i took out the battery put it back in try to start nothing.
Anyway it doesn't get detected by odin, can't access download mode nor recovery mode. Only thing when connected to pc is installs driver for QHSUSB_DLOAD. I have tried different ways to fix it and the only way without sending my phone somewhere to service is to boot the phone through sdcard.
http://forum.xda-developers.com/attachment.php?attachmentid=2541005&d=1390771555
ValenteL has provided a .zip file that you run in recovery either which one you have and it should give a .img file at the size of 128mb into your sdcard
Those who have the debrick.img file from a stock 9195 4.2.2, would you be kind and sen it to me so that i can try fix my s4 mini
also i have already tried a debrick.img but from a 9192 don't know the firmware version but it didn't do anything
Here you go. http://d-h.st/XK5V .. Extract the downloaded file and u will get img file in a folder.
sasank360 said:
Here you go. http://d-h.st/XK5V .. Extract the downloaded file and u will get img file in a folder.
Click to expand...
Click to collapse
Thanks for the debrick image but it seems my phone it totally bricked only JTAG or a real service could fix it. if you have any knowledge in this part could it be that the sdcard i used are too slow? i have used 16GB class 2 and a 8GB class 4, still no sign.
Edit: 16GB class 2 and 8GB class 4 works fine for boot through sdcard
I could say it has progressed a little i am using the 16GB class 2 sdcard and when i plug it to the computer the phone vibrates but no qhsusb_dload is detected and odin also finds nothing
Edit: When the phone vibrates it indicates that it is turned on, mine only took a little while to go to the boot recovery mode but failed to boot the os and switched mode to either factory mode or odin mode.
The Debrick.img worked fine just need to hold down power button for like 10-15 seconds. but it seems like my phone has a broken partition, i9195 connects to odin but cannot be flashed because of, false pit file? i have read that the pit file needs to correspond to the gb model the phone is and the firmware version for instance 16GB 4.2.2, so now i need a .pit file to be able to continue the recovering process of my phone.
It is better to use a class 10 sd card.
Check the general section for the thread that explains how to unbrick using pit file.
Hey my Phone just vibrates but there is nothing on the screen and my computer downst detect anything how did you get through that vibration
Link Down
Hey, could you please provide another link for the image? Dev-host won't work anymore...
DamnedSon said:
Hey, could you please provide another link for the image? Dev-host won't work anymore...
Click to expand...
Click to collapse
can someone send working debrick.img ??
i found one on net but not work for my i9195. I was trying with 16gb class 4 and 128gb XC 1 and different card adapters and no success. nothing to appear on my device, i was trying with power button and with USB JIG and nothing. When i plug device to PC nothing appears. but when I put it to PC without microsd appears qhsusb_dload. I dont uderstand why this not work for me.
Here are all events:
1) no microsd with battery => Qualcomm HS-USB QDLoader 9008 (COM4) and after 10 sec disconnect
2) no microsd without battery => USB Input Device and after 5 sec disconnect and than Qualcomm HS-USB QDLoader 9008 (COM4) and after 7 sec disconnect
3) with microsd with battery => nothing happen
4) with microsd without battery => USB Input Device and after 5 sec reconnect and again again again .... infinity...
this makes me crazy, what to do?? i am on windows 10
cro.dev said:
can someone send working debrick.img ??
i found one on net but not work for my i9195. I was trying with 16gb class 4 and 128gb XC 1 and different card adapters and no success. nothing to appear on my device, i was trying with power button and with USB JIG and nothing. When i plug device to PC nothing appears. but when I put it to PC without microsd appears qhsusb_dload. I dont uderstand why this not work for me.
Here are all events:
1) no microsd with battery => Qualcomm HS-USB QDLoader 9008 (COM4) and after 10 sec disconnect
2) no microsd without battery => USB Input Device and after 5 sec disconnect and than Qualcomm HS-USB QDLoader 9008 (COM4) and after 7 sec disconnect
3) with microsd with battery => nothing happen
4) with microsd without battery => USB Input Device and after 5 sec reconnect and again again again .... infinity...
this makes me crazy, what to do?? i am on windows 10
Click to expand...
Click to collapse
Hi
i've found this 2
- debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
- debrick.img 4.2.2 -> LINK (http://d-h.st/XK5V)
you can try them
i am in your same situation, i have 4.4.2 nobrand last Firmware I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar.md5
with bootloader CF-Auto-Root-serranolte-serranoltexx-gti9195.tar.md5
but noone of the 2 image make my phone boot again (i see it connect on USB if i dont have the SD CARD inserted)
i have tried some old SD CARD and the last ..i used a "modern" Sandisk Ultra 16GB HC I , and it is a 10 Class
but the recovey boot wont come on !!
and suggestions ?
maybe that 2 debrick img are fault , or it is needed a specific IMG ?
thank you for any help
updage.. i've found other brick images and then i were able to boot my phone ...here
https://www.youtube.com/watch?v=p5J9oW_BV5k
but the phone started to go on continuos reboot.... only once it got stoped on an error message and then i were able to connect wtih ODIN ,just for once to try to flas the boot loader but odin sent me an error of "pit missing" and the the phone got stucked
i could not connect once more becouse now it is again IN CONTINUOS REBOOT STATE during recovery from SD CARD
any one can help me to try to "fix" this ? or have maybe a better image file
thank you
lizthe said:
Hi
i've found this 2
- debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
- debrick.img 4.2.2 -> LINK (http://d-h.st/XK5V)
you can try them
i am in your same situation, i have 4.4.2 nobrand last Firmware I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar.md5
with bootloader CF-Auto-Root-serranolte-serranoltexx-gti9195.tar.md5
but noone of the 2 image make my phone boot again (i see it connect on USB if i dont have the SD CARD inserted)
i have tried some old SD CARD and the last ..i used a "modern" Sandisk Ultra 16GB HC I , and it is a 10 Class
but the recovey boot wont come on !!
and suggestions ?
maybe that 2 debrick img are fault , or it is needed a specific IMG ?
thank you for any help
updage.. i've found other brick images and then i were able to boot my phone ...here
https://www.youtube.com/watch?v=p5J9oW_BV5k
but the phone started to go on continuos reboot.... only once it got stoped on an error message and then i were able to connect wtih ODIN ,just for once to try to flas the boot loader but odin sent me an error of "pit missing" and the the phone got stucked
i could not connect once more becouse now it is again IN CONTINUOS REBOOT STATE during recovery from SD CARD
any one can help me to try to "fix" this ? or have maybe a better image file
thank you
Click to expand...
Click to collapse
which .img from link you used for successfull booting up? And which microsd you used? I still havent any success. Can you help me? Thanks
on that youtube page you can find an extenal link to a cloud space where you can find several image
i dont rember wich one worked for me ..i had to try some of them ...but anyway it doesnt matter becouse it depends on your mobile,firmware revision .etc ect
try some of them until you find one
lizthe said:
on that youtube page you can find an extenal link to a cloud space where you can find several image
i dont rember wich one worked for me ..i had to try some of them ...but anyway it doesnt matter becouse it depends on your mobile,firmware revision .etc ect
try some of them until you find one
Click to expand...
Click to collapse
I tried all of them and no one work. Which microsd card you used?
cro.dev said:
I tried all of them and no one work. Which microsd card you used?
Click to expand...
Click to collapse
16gb HC 10
---------- Post added at 04:52 PM ---------- Previous post was at 04:50 PM ----------
lizthe said:
16gb HC 10
Click to expand...
Click to collapse
if you have similar SD i suppose that you have a different BOOT ........and this is the reason you are not able to boot (i hope you "see" your phone connected to the pc in a way becouse i am supposing it ......otherwise your phone is death and nothing works)
lizthe said:
16gb HC 10
---------- Post added at 04:52 PM ---------- Previous post was at 04:50 PM ----------
if you have similar SD i suppose that you have a different BOOT ........and this is the reason you are not able to boot (i hope you "see" your phone connected to the pc in a way becouse i am supposing it ......otherwise your phone is death and nothing works)
Click to expand...
Click to collapse
I bought kingstone 16gb class 10 and tried all images and no success. again same results, if I use 9195l images pc recognize device like without sdcard, if I put 9195 images than pc dont recognize it, and without battery loop. I am not smart now what to do :/ how can I see what was firmware on my device? can i make some image of working s4 mini? because i have one which works. do you turned on device with usb-jig or just by pressing power?
J0SH1X said:
Hey my Phone just vibrates but there is nothing on the screen and my computer downst detect anything how did you get through that vibration
Click to expand...
Click to collapse
For who have same problem :
This means the phone's battery is low. Just charge the battery.
Do you guys have a debrick.img for galaxy s4 mini (19190) 4.2.2 jellybean version?
If you do have debrick.img for s4 mini (19190) 4.2.2 jellybean version pls can i have a link to that, my phone's been dead for over a year now and i can't find a working debrick.img for that model. Pls if you do have let me know. Thank you
link files img ???
Failed at downgrading before I knew it I was bricked so went ahead and used the Qualcomm method got it to show up in device manager. As I was setting everything up the battery fell out, now my device won't vibrate or boot for that matter. Beforehand it only vibrated when connecting a usb to it, Any tips bring it back to life?
(I heard you can boot the os from an SD card but I don't have the .img file for my device.)
Device: LG Verizon VS985 was running MM
bump?
With the d850 there is a trick to sort out the motherboard and get it to boot. If your battery is removable it sound with on yours. Try searching for unbricking. There should a tutorial on here.
So I have this Sprint Note 4. Haven't used it in forever since I got the Note 5. Anyway, so when I try to turn it on, it doesn't turn on, and the charging indicator doesn't turn on when plugged in. When I plug it in my PC it shows up as "Qualcomm HS-USB QDLoader 9008 (COM10)".... I read somewhere that apparently it's hard bricked and I need a debrick file to get it working again. Now I found some random files somewhere, so I decided to put them on the SD card. The phone vibrated, but didn't do anything, now it wont do anything anymore..
Can someone guide me and/or provide me with the proper debrick files for my Sprint Note 4?
Hi,
My fiancé's s4 mini was found switched off about a week ago. Since then it will not charge or turn on - it always stays in black screen. Samsung support wants £125 to replace the motherboard and they say they cannot recover the data. I am more interested in recovering the contacts/any useful data from the phone rather than making it work again.
When connected to computer it will be detected as "relink hs-usb qdloader 9008". If an SD card is inserted with the various debrick images posted in the forums it will vibrate and boot, print REBOOTING after WRITE 139008 and it will keep rebooting and do the same all the time.
Phone was never rooted. It has received successfully all Samsung updates. QFIL detects the port but fails to flash the phone with 'Sahara fail' Samsung Kies / Odin do not detect the phone at all.
Any suggestions on how to proceed are greatly appreciated. I do suspect that perhaps I may need a more recent debrick.img but could be wrong. Or as Samsung says the motherboard is completely dead and unrecoverable..
Thanks!
One fine morning I woke up and found the S4 mini dead. I assumed it was just the battery discharged but it would not charge after plugging in.
When plugged in to USB it shows the QHSUSB_DLOAD so I installed the Qualcomm QDLoader drivers.
But I cannot get the device to Download mode.
JIG did not work, neither did the debrick image. The 3 key combination does not work either.
If I press the Power key when plugged in to USB, I can see the Qualcomm device getting disappear and reappears in a few seconds.
Any other suggestions to revive the phone?
Thanks.
Bump
Exactly the same problem happened to me yesterday
Mine is a I9195