Develop Bugs

[Q] Gapps Won't Install on TWRP

Hi all,
I used GooManager to get TWRP installed and managed to successfully flash the lastest CM10 stable but TWRP will not flash any Gapps ZIP files, I've tried the latest and some older ones.
Every time I try and flash it fails in TWRP.
Any ideas?
Thanks.
SOLVED: Got this fixed, didn't realize the GAPPS download was bad. Got a good ZIP file and all is well. Feel free to delete.

After flashing TWRP, will not boot system

Good morning,
I'm sure it's something I'm missing. I had my tablet unlocked and running fine with TWRP. I went to Omni then to Preview 2. All was well.
Last night I decided to try SuperSU 2.72. I factory reset my Pixel C by installing the latest firmware. I then used fastboot to flash TWRP. It goes into TWRP fine but now it will not boot system any longer. It goes directly into TWRP when I have it boot system. Is this an encryption problem. I've tried both TWRP versions and same behavior.
Any idea what I'm doing wrong?
Thanks!

if you have 3.0.2 i think there was a problem with early build causing this. there was a link posted for the new one that supposedly fixed it. or just use the 3.0.0 build.

Mike02z said:
Good morning,
I'm sure it's something I'm missing. I had my tablet unlocked and running fine with TWRP. I went to Omni then to Preview 2. All was well.
Last night I decided to try SuperSU 2.72. I factory reset my Pixel C by installing the latest firmware. I then used fastboot to flash TWRP. It goes into TWRP fine but now it will not boot system any longer. It goes directly into TWRP when I have it boot system. Is this an encryption problem. I've tried both TWRP versions and same behavior.
Any idea what I'm doing wrong?
Thanks!
Click to expand...
Click to collapse
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !

followmsi said:
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
Click to expand...
Click to collapse
Thanks guys! I did go back to 3.0.0-0 and it now boots into system. I'll also try your repackaged version of 3.0.2-0. I'm on my work PC but I don't see a link to your version. Is my work PC just hiding it or can I find it somewhere else? Thanks again!

Mike02z said:
Thanks guys! I did go back to 3.0.0-0 and it now boots into system. I'll also try your repackaged version of 3.0.2-0. I'm on my work PC but I don't see a link to your version. Is my work PC just hiding it or can I find it somewhere else? Thanks again!
Click to expand...
Click to collapse
Here is the direct link for TWRP_dragon_3.0.2.0.img:
https://onedrive.live.com/?authkey=...&id=479EB75F5DD9DA59!131&cid=479EB75F5DD9DA59
Here is the complete folder: (TWRP flashable stock kernel)
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Cheers

Well in case of "recovery bootloop" start your device in bootloader mode and type "fastboot reboot" in command shell. That works mostly. No need to flash another recovery.

redukt said:
Well in case of "recovery bootloop" start your device in bootloader mode and type "fastboot reboot" in command shell. That works mostly. No need to flash another recovery.
Click to expand...
Click to collapse
And connect everytime with PC to do a manual reboot via fastboot .. seems a little bit too much for a simple reboot. At least for me
A proper TWRP with proper vboot will boot always correctly, like the one from xceed.
Did you ever had to do a manual reboot on his version ?
Should be fixed at the root cause .. Hope you agree ?
Cheers

I think there´s a little missunderstanding
The fastboot command helps you to get out of "recovery bootloop". After this you can reboot your device how offen you want without issues.
And yes with all existing TWRP versions I had some reboot hickups and have solved it with the fastboot method...

redukt said:
I think there´s a little missunderstanding
The fastboot command helps you to get out of "recovery bootloop". After this you can reboot your device how offen you want without issues.
And yes with all existing TWRP versions I had some reboot hickups and have solved it with the fastboot method...
Click to expand...
Click to collapse
Interesting .. I did not have any reboot issues with xceed TWRP versions .. I had to use the fix fastboot option once, but this is another topic.
But thanks for your information ...

followmsi said:
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
Click to expand...
Click to collapse
Hi.. after installing TWRP my phone nokia 3 TA-1020 I only booted to system once, when I restarted it later it does not boot the system but boots to TWRP. what can I do so that it will be rebooting to system instead of TWRP your help will be highly appreciated, thanks in advance.

Annan Denis said:
Hi.. after installing TWRP my phone nokia 3 TA-1020 I only booted to system once, when I restarted it later it does not boot the system but boots to TWRP. what can I do so that it will be rebooting to system instead of TWRP your help will be highly appreciated, thanks in advance.
Click to expand...
Click to collapse
Wrong device thread .. anyway just restore "stock" ROM/recovery to make it working again.
Good luck !

Rooting problem open beta 17

After Root open beta 17 stook on boot logo
Any solution

Amar5373 said:
After Root open beta 17 stook on boot logo
Any solution
Click to expand...
Click to collapse
Well is it really too hard to explain your problem in proper sentences? So you wanted to root your phone. What did you use? Magisk? SuperSU? Which version? I can't help you if you don't provide information..

I have the same problem. Neither SuperSu nor Magisk works.

persa2011 said:
I have the same problem. Neither SuperSu nor Magisk works.
Click to expand...
Click to collapse
supersu not working please help

Use SuperSu 2.82

2.82 works fine for me! Many thanks!

My Steps For Stock OB17 Zip *Same Steps for Magisk V12 Or SuperSu V2.82*
Code:
Flash latest TWRP From Blu_Spark V35 Or Stock TWRP
Format Data Reboot TWRP
Wipe All
Copy [URL="http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_openbeta_17/"]OB17[/URL], [URL="https://forum.xda-developers.com/devdb/project/dl/?id=25000"]TWRP V35[/URL], [URL="http://www.supersu.com/download"]SuperSU V2.82[/URL] To Internal Storage
Flash OB17
Select Flash IMG, Install TWRP Reboot TWRP (So Stock Rom Doesn't Replace With Stock Recovery)
Wipe Cache/Dalvik
Flash SuperSU
Reboot = Profit
*Optional*
Take A Backup Of Rooted Boot IMG (If You Flash A Custom Kernel And Run Into Issues You Can Restore Rooted Boot IMG With Ease)
Flash Kernel Of Choice (Beware Because Of No Source Code And Kernel Changes Might Be Some Issues With Custom Kernels)

TO root latest beta an stable version you can follow this guide:

S4 Mini Softbrick

First time flashing ROMs, installed resurrection remix tryed to install Gapps which failed, yet RR booted up on its own just fine. Then tried to flash a new recovery on it (TWRP 3.0) yet the phone would just never boot up to complete the recovery install. So now i have a phone which wont enter recovery mode and cannot complete the download of the new recovery.
TLDR: Phone wont boot into recovery as ROM is broken so download cant be fixed?
Previous: recovery TWRP 2.6
Phone: Samsung Galaxy S4 GT-19195
Any help would be really appreciated!
Thanks

Are you sure that you have flashed the right Recovery for your Phone.
Normally the way is.
Boot into Recovery
Install the Recovery .zip file
Reboot into Recovery.
Reboot into System ( ROM )
Can you post a link where you download the Recovery and which file.

bierma32 said:
Are you sure that you have flashed the right Recovery for your Phone.
Normally the way is.
Boot into Recovery
Install the Recovery .zip file
Reboot into Recovery.
Reboot into System ( ROM )
Can you post a link where you download the Recovery and which file.
Click to expand...
Click to collapse
That would only work from TWRP ver 2.8.4, I think you missed he is still on very old TWRP or maybe he edit later , he would have to install with Odin method
@Spec77
If you can boot into download mode you should be able to flash new recovery with Odin method (NOT use zip file).
As Bierma suggests maybe you flashed wrong TWRP does your phone have another letter and after gt-19195 if so it is a different phone & you need different TWRP. Or maybe you just tapped wrong link.

IronRoo said:
That would only work from TWRP ver 2.8.4, I think you missed he is still on very old TWRP or maybe he edit later , he would have to install with Odin method
@Spec77
If you can boot into download mode you should be able to flash new recovery with Odin method (NOT use zip file).
As Bierma suggests maybe you flashed wrong TWRP does your phone have another letter and after gt-19195 if so it is a different phone & you need different TWRP. Or maybe you just tapped wrong link.
Click to expand...
Click to collapse
This way works also if you come from a CWM or PhilzTouch Version.
If you come from TWRP =>2.8.4.0 than you can flash an *.IMG File ,but you can flash on all Versions a *.zip file.

Managed to fix the brick
Thanks for the help, I managed to fix it by installing TRWP 3.0 from ODIN, and now that i have that I'm fine
Thanks!

How to Update Rooted Oneplus 5T to 5.1.2?

I do have an idea on how to do it i just want some clarification.
I will lose the TWRP and Root on the process right? If so can someone tell me a step by step guide on updating? And dirty flashing at the same time? The do's and dont's. Thanks!

You are currently in which build? Beta to stable is not recommended.
Btw, I am using bluspark recovery and it survived dirty flashes for me. Else no worries after system boots, boot to bootloader later and flash twrp image again.

Im on stable build should i trust the OTA that has been downloaded on the phone update itself or just use the zip file and flash it via twrp instead? Thanks

Download zip file
Flash it in TWRP and DON'T REBOOT YET
flash Magisk in TWRP
Reboot
Done
At least that's what I did and the root is still here

Kartoflaszman said:
Download zip file
Flash it in TWRP and DON'T REBOOT YET
flash Magisk in TWRP
Reboot
Done
At least that's what I did and the root is still here
Click to expand...
Click to collapse
After flash magisk I flash twrp