hello guys! have anyone here expirience like this.?
i have SAMSUNG GALAXY TAB 3 LITE SM-T110, while i'm using it. it's automatically turn off and i think it's low batt so i charge it, when i open it. it cant, stuck on samsung logo and continiously reboot and i cant even go to recovery mode. so, i try to reflash the stock rom. i cant flash the stock rom, i extract the md5 file and i compress one by one to tar file. still cant flash but the system.img.tar the only that i can flash and still stuck on samsung logo and continiously reboot.
this is my question. why i cant flash the stuck rom even the one by one tar files except the system.img but still stuck?
sorry about my english guys, from ph here.
thank you!
no,you can't flash one by one,and take note,you dont have to extract the md5 file,it is signed zip
which mean,if you extract it, the signature are gonna break even though you put it in compressed form and it just not gonna flash,just flash the whole rom file.
Related
Hey guys i just flashed the 25/05/2012 build of cm9 and for some reason its stuck in the bootscreen and doesnt go past it, i can still go back into cwm recovery or fastboot but what do i do to get my phone working...?
iv been trying to get the new zip files to flash any rom onto it but cant get comp to reconise phone i hope someone can guide me to getting this working
iv tryed a few offical ruu roms and none of them are working aswell, i really dontknow why cm9 i installed how casued this bootloop shame i cant attempt to try the newly updated version for this loop...anyways is there a way to get my phone working
encryptioncsta said:
Hey guys i just flashed the 25/05/2012 build of cm9 and for some reason its stuck in the bootscreen and doesnt go past it, i can still go back into cwm recovery or fastboot but what do i do to get my phone working...?
iv been trying to get the new zip files to flash any rom onto it but cant get comp to reconise phone i hope someone can guide me to getting this working
Click to expand...
Click to collapse
Did you make a NAND backup of your previous ROM ? If so, restore it
Did you try to instal it again? Do it if not
And the last one, did you flash the boot.img ?
no i didnt make a backup and no i didnt have the boot.img file at the time
im super scared to what i can do now...
is there any way i can transfer files from my computer to my phone at this stage?
i have the boot.img and new cm9 files here now but dontknow if theres anyway to get these onto the phone in its current state
encryptioncsta said:
no i didnt make a backup and no i didnt have the boot.img file at the time
im super scared to what i can do now...
Click to expand...
Click to collapse
Dont panic, you dnt bricked it
OK, lets do your job ...
HERE is your boot.img for CM9...flash that first via fastboot and then flash the ROM via CWM.
---------- Post added at 03:43 AM ---------- Previous post was at 03:41 AM ----------
encryptioncsta said:
is there any way i can transfer files from my computer to my phone at this stage?
i have the boot.img and new cm9 files here now but dontknow if theres anyway to get these onto the phone in its current state
Click to expand...
Click to collapse
You dnt have to do that over the CWM, you do that over the fastboot comand: "fastboot flash boot boot.img"
encryptioncsta said:
is there any way i can transfer files from my computer to my phone at this stage?
i have the boot.img and new cm9 files here now but dontknow if theres anyway to get these onto the phone in its current state
Click to expand...
Click to collapse
go download latest recovery (test version) fastboot that. then you can copy a different rom to your storage.
crap...how do i flash it when i cant put it onto the phones internal sd card?
iv had a samsung for way too long its kinda hard so far getting used to htc lol
encryptioncsta said:
crap...how do i flash it when i cant put it onto the phones internal sd card?
iv had a samsung for way too long its kinda hard so far getting used to htc lol
Click to expand...
Click to collapse
You dnt put the boot.img on your phone, you put that file in the fastboot folder on your PC .
I think the kernel is incompatible. If that's not the case then the rom is at fault. It is after all... still in testing. So I recommend a 1 click install from Odin. I had worst before where it wouldn't let me even boot into recovery and the one clicker saved me
Sent from my SPH-D710 using xda premium
It could also be because u didn't properly wipe. And it overlapped the current from therefore giving u errors
Sent from my SPH-D710 using xda premium
i kls i flash the boot via cmd but so far still wont boot, where can i get the latest boot image that lets me use my pc as a storage device
also how do i flash using odin?
i cant get odin to reconise the htc one x but it will pickup my galaxy note
encryptioncsta said:
i kls i flash the boot via cmd but so far still wont boot, where can i get the latest boot image that lets me use my pc as a storage device
Click to expand...
Click to collapse
flash the ROM again and then the boot.img befor you let the ONE X boot ...
i just tryed flashing the rom again and then flashed the boot.img but still hangs at the bootloop
encryptioncsta said:
i just tryed flashing the rom again and then flashed the boot.img but still hangs at the bootloop
Click to expand...
Click to collapse
Did you look into the zip file ? Maybe you first had to extract it and then pic the right zip ? Open the zip on your PC and tell me the first 2 files you see there ...
dude, go here and get the test recovery http://forum.xda-developers.com/showthread.php?t=1594819
then get a different rom boot into recovery & connect your usb cord. when htc storage pops up on your pc put the new rom on your storage. flash it then boot to bootloader and flash its boot.img . this time check the md5 sum before you flash. the one you have now probably didn't download correctly.
what do u mean by md5?
i have given up with this cm9 crap already, i tryed trip version of cm9 but nothing with work as in no bluetooth no wifi no web broswer would work and even sound thats why i finally wanted to try this version over here at xda and now i cant seem to get any rom to work lol
encryptioncsta said:
what do u mean by md5?
i have given up with this cm9 crap already, i tryed trip version of cm9 but nothing with work as in no bluetooth no wifi no web broswer would work and even sound thats why i finally wanted to try this version over here at xda and now i cant seem to get any rom to work lol
Click to expand...
Click to collapse
md5 is a checksum to validate downloading wen't correctly. You might want to take a few min to calm down and do some reading on what your actually doing before messing with a $700 phone There are even threads here that show you how to flash roms correctly, How to recover from bad flashes etc. I'm not trying to be a ****, but Seriously there are 400 threads identical to this one & every one of them ends the same way. Plz follow the instructions given to you earlier & push the test recovery so you can mount your usb drive. then flash a different Rom, any rom. & you will be ok. Just don't freak out, I think we've all been in this position before. But there is always a way to recover.
i managed to flash trips version of cm9 back on it bit its really unstable and so many features dont work, so how should i go about installing either this cm9 version or another custom rom?
also whats the best rom available atm? i kinda prefere stock ics look but open minded as i just want all features working rather than caring about looks
Hello,
I am having a big serious problem with my Galaxy S2 SGH-T989. I have ColckWorkMod Recovery v6.0.4.3 that wont work at all, while i chose to Wipe Cache or Format or Install any zip file. So i cant even install a zip file. I have also my ROM ****ed up, my Room does not start at all. It stuck and reboot the phone every time it tries to open the system, stuck at Android logo. Please what i can do to turn my phone back to work ? :crying:
Try flashing twrp recovery using odin
Here's the. tar file:
http://techerrata.com/file/twrp2/hercules/openrecovery-twrp-2.6.1.0-hercules.tar
Here's the home page link:
http://teamw.in/project/twrp2
Good luck :thumbup:
sent from "Where Man has Never Gone Before" using Tapatalk Pro
Is your phone still boot looping? Can you stay in recovery mode or does it reboot again while you're in there? If so, you might have a sticky power button. Go here for the solution: http://forum.xda-developers.com/showthread.php?t=1931310
I literally just fixed my dad's s2 that was bootlooping. I'm on mobile right now, so sorry for not providing links, but I had to use odin to revert totally back to stock, then reroot. Hope this helps. I do have the files I used on his computer, lmk if you need.
Sent from my Nexus 5 using Tapatalk
i downloaded the stock rooted image from the development fourm witch was 1.4gb. how do i flash it with oden? oden does not recognize the zip file and if if extract it, it still doesnt recognize it.
deaken3 said:
i downloaded the stock rooted image from the development fourm witch was 1.4gb. how do i flash it with oden? oden does not recognize the zip file and if if extract it, it still doesnt recognize it.
Click to expand...
Click to collapse
The only way you can install the zip file is by using a custom recovery, here flash this using Odin:http://goo.im/devs/philz_touch/CWM_Advanced_Edition/p5110/philz_touch_6.12.8-p5110.tar.md5
but first you have to move/copy the zip file of the rom or whatever you want to install to your tablet or micro sd card. and when you done flashing the recovery file, you will have to boot your note in recovery mode, you can do it by pressing volume up and power button at the same time. then you can choose the zip you want to flash.
and if you want to go back and install the stock firmware here is a link of the note 8.0 4.2.2 official firmware US version:https://drive.google.com/file/d/0B9QvmNs9dpD-M21DaF95NWdNUW8/edit?usp=sharing
thanks a lot for the info!! i have got Clockwork Recovery 6.0.3.1 on it but i will flash it with the one you suggested. you have cleared things up for me and i appreciate it.:good: my tablet has been down for about a week now while i have been trying to figure it out, just going to a black screen after the samsung logo. what rom would you suggest for firmware 4.3? i know samsung does not have an official release yet.
Dear Friends,
I desperately need help to get my SGT SM-T211 to get to work. I recently flashed the stock rom to my device using ODIN 3.07 but accidently ticked the "Erase All Nand " and my device is now stuck on the Samsung startup swirl without booting into the system. After reading the web solutions I kinda figured out that I need to attach a .pitfile to restore the partitions. If anyone of you could help me with instructions or direct me to any links with the solution I will be very grateful.
Thank you in advance.
Are you sure that you are flacher The right Firmware version?
Have you uncheck The repartion in Odin ?
If not then you need The Pit.file.
1. Can you Boot into The recovery? If yes than male a factory reset.
2. Try again ,and flash The Stockfirmware with Odin.
Are you sure that you are flacher The right Firmware version?
Have you uncheck The repartion in Odin ?
If not then you need The Pit.file.
1. Can you Boot into The recovery? If yes than male a factory reset.
2. Try again ,and flash The Stockfirmware with Odin.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yes I used the firmware I got from the Samsung site.
1. I cannot Boot into recovery.
2. Flashed using Odin using stock firmware but doesn't go beyond the Samsung Logo.
See attached image.
buddyX said:
Are you sure that you are flacher The right Firmware version?
Have you uncheck The repartion in Odin ?
If not then you need The Pit.file.
1. Can you Boot into The recovery? If yes than male a factory reset.
2. Try again ,and flash The Stockfirmware with Odin.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yes I used the firmware I got from the Samsung site.
1. I cannot Boot into recovery.
2. Flashed using Odin using stock firmware but doesn't go beyond the
See attached image.
Click to expand...
Click to collapse
Your Tab i think is only softbricked.
In your Situation i will do following things.
Open your Tab , diconect the batterie, press for 20 sec. The power button.
Connect the batterie , abd boot up your tab.
1. Flash a Customrecory, i prefere CWM
2. Flash a stable Custumrom , for example Rockettab in the lite Version.
3. Flash a stable kernel, blackhawk 1.8
bierma32 said:
Your Tab i think is only softbricked.
In your Situation i will do following things.
Open your Tab , diconect the batterie, press for 20 sec. The power button.
Connect the batterie , abd boot up your tab.
1. Flash a Customrecory, i prefere CWM
2. Flash a stable Custumrom , for example Rockettab in the lite Version.
3. Flash a stable kernel, blackhawk 1.8
Click to expand...
Click to collapse
The tablet is stuck on the Samsung Screen with the Samsung Logo continuously illuminating without booting into the home screen.
How can I get the Samsung Galaxy Tab 3 &.0 SM-T211 into fastboot mode? Is it Power + Volume down + Home keys?
Appreciate any help on this because I really miss my tablet.
buddyX said:
The tablet is stuck on the Samsung Screen with thze Samsung Logo continuously illuminating without booting into the home screen.
How can I get the Samsung Galaxy Tab 3 &.0 SM-T211 into fastboot mode? Is it Power + Volume down + Home keys?
Appreciate any help on this because I really miss my tablet.
Click to expand...
Click to collapse
Yes, thats are the buttons to into dowmload mode
I've attached the Tab 3 7.0 PIT file, I believe it's universal between T210 & T211.
Try flashing your Stock ROM without it first, if that doesn't work try with the PIT.
I obtained it from a Stock T211 ROM archive, just unzip it to get the file to use with Odin.
Gilly10 said:
I've attached the Tab 3 7.0 PIT file, I believe it's universal between T210 & T211.
Try flashing your Stock ROM without it first, if that doesn't work try with the PIT.
I obtained it from a Stock T211 ROM archive, just unzip it to get the file to use with Odin.
Click to expand...
Click to collapse
Thank you very much for sharing the .Pit file from your rom, could you kindly share the stock kernel if you have it too.
Thanks in advance.
I Bought a AT&T Galaxy Note 2 SGH-I317 Rooted the told me he flashed the phone to stock firmware (Which I dont know if he did )
I activated the phone and it did an ota AT&T update the phone rebooted when it finished Updating but it stayed on the Samsung Galaxy Note 2 Boot logo. It wont boot into recovery but it will go into downloading mode :Note When i boot into Downloading mode in the top left corner it says odin mode in red letters /Product Name: SGH-I317/ Current Binary:Custom/ System:Custom /Knox Warrenty Void:1 / RP Swrev: A3
I've tried kies upgrade Initialisation it would download but when installing it'll get a error
I've tried alot of odin methods please help !!!!
Okay....
Deep breath....and here we go..
The Odin flashes you are attempting....are failing due too your updated bootloader....(the one you received when you took the official update)..
Nothing you can do about the bootloader now as it can't be reverted....but that's okay....
Here's the plan...
Load up odin and download the UCUCNJ1 rooted rom from the link below...http://forum.xda-developers.com/showthread.php?t=2973448
Boot the device into download mode and flash the above file...
If the device begins boot....pull the battery and put the phone into download mode ....and flash the same file again...
Once complete...allow the phone to boot and it should start normally...
If it does....then power off and boot into your stock recovery and wipe data then cache and boot again...
You should then have a rooted stock....UCUCNJ1 build...
The reason this works is because your rom image that you flashed does not contain a bootloader image....
Once you are back up and running....you'll need supersu....(the thread explains this in the first post)...
The process to get you going is pretty simple....you just need the right file to flash...
Read that first post....as everything you need is there....g
gregsarg said:
Okay....
Deep breath....and here we go..
The Odin flashes you are attempting....are failing due too your updated bootloader....(the one you received when you took the official update)..
Nothing you can do about the bootloader now as it can't be reverted....but that's okay....
Here's the plan...
Load up odin and download the UCUCNJ1 rooted rom from the link below...http://forum.xda-developers.com/showthread.php?t=2973448
Boot the device into download mode and flash the above file...
If the device begins boot....pull the battery and put the phone into download mode ....and flash the same file again...
Once complete...allow the phone to boot and it should start normally...
If it does....then power off and boot into your stock recovery and wipe data then cache and boot again...
You should then have a rooted stock....UCUCNJ1 build...
The reason this works is because your rom image that you flashed does not contain a bootloader image....
Once you are back up and running....you'll need supersu....(the thread explains this in the first post)...
The process to get you going is pretty simple....you just need the right file to flash...
Read that first post....as everything you need is there....g
Click to expand...
Click to collapse
The Odin Method You gave me did not work it still freezes on the galaxy note 2 boot is there any other methods you know ?
MrHooper0 said:
The Odin Method You gave me did not work it still freezes on the galaxy note 2 boot is there any other methods you know ?
Click to expand...
Click to collapse
follow my steps here >> http://forum.xda-developers.com/showpost.php?p=62565838&postcount=89