http://forum.xda-developers.com/showthread.php?t=3074586
I had been using it for the last 2 days with out any problems.
Same here!!
But when I install Smart Alarm Icon & XInstaller at the same time ,and I reboot to see if the two Xposed app works.
However, I got stuck on the boot screen.
Yet, I haven't tried to install each app at a time, so I dunno which app caused the problem...
jasonlee0315 said:
Same here!!
But when I install Smart Alarm Icon & XInstaller at the same time ,and I reboot to see if the two Xposed app works.
However, I got stuck on the boot screen.
Yet, I haven't tried to install each app at a time, so I dunno which app caused the problem...
Click to expand...
Click to collapse
I was running it on ARHD but got some weird ram overflow..
It just stacked my 3GB completely full untill the phone became unresponsive so I had to restore a nandroid to fix it..
Weird issue, it might have been one of the modules..
Just waiting till official 64bit version comes out I think...
Hi all
Would like to install exposed, any news on the 64bit version and or the bugs mentioned?
Cheers
blocka said:
Hi all
Would like to install exposed, any news on the 64bit version and or the bugs mentioned?
Cheers
Click to expand...
Click to collapse
If you are using 5.1 can find all info here, If you want to use Install xposed-v70-sdk22-arm64-by-romracer-20150808.zip is what you need and you can get the APK here
If using 5.0.2 use link in OP
thanks liam_davenport
I've been looking for a guide or instructions on how to recover from a boot loop but haven't been to successful in finding anything worthwhile. So wanted to ask here, if it does happen (not that it will) I just want to cover my bases and know beforehand how to recover from a boot loop. Obviously part of the recovery process would be to have taken a NAN backup prior to installing the xposed framework, to recover it's a process of booting into recovery and restoring the NAND?
Really looking forward to getting this on my phone.
Thanks guys.
There is an uninstaller zip available, flash it when you experience a bootloop ( http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979 ) . Otherwise just flash your rom new, that works as well. Then deactivate all your modules and start reactivating them one by one, you might have an incompatible module running,, which causes it
I've not gotten this to work so far. I'm on 5.1 stock rooted, s-on. Booted up successfully after installing the zip, but when I launched Amplify it says xposed isnt active.
When i went to check in xposed, it says romracer 71 active though. A little help anyone?
Sent from my HTC One M9 using Tapatalk
neverborn said:
I've not gotten this to work so far. I'm on 5.1 stock rooted, s-on. Booted up successfully after installing the zip, but when I launched Amplify it says xposed isnt active.
When i went to check in xposed, it says romracer 71 active though. A little help anyone?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Did you activate the module?
I did, yes. However, it does seem like Xposed just won't work with stock 5.1 / odex / S-OFF; bootloops abound.
I've resorted to ARHD 12 to get it to work.
neverborn said:
I did, yes. However, it does seem like Xposed just won't work with stock 5.1 / odex / S-OFF; bootloops abound.
I've resorted to ARHD 12 to get it to work.
Click to expand...
Click to collapse
It does work with rooted stock 5.1 s-on though. Sometimes it requires the 2 button reboot. It occasionally sticks at the splash screen but not often. I have used Greenify, Sense Toolbox for Sense 6 and 7 (which has lots of cool features like 12 mini quick toggles and status bar and notification hiding), Always Correct for password memory on my keyboard, YouTube Ad Away, X Hangouts which allows custom theming and features and YouTube Background Playback.. All working great here with the Romracer sdk22 arm64 5.1 framework zip and Xposed Installer 3.0 alpha 4
Sent from my M9 using Xparent Gray Tapatalk 2
Thanks for letting me know. On the other hand, i can stick with ARHD as it's been so stable so far.
Sent from my HTC One M9 using Tapatalk
There is an official 5.1 x64 version now..
oemfoefoee said:
There is an official 5.1 x64 version now..
Click to expand...
Click to collapse
True that, just flashed...first boot was not successful or maybe I wasn't patient enough but the second boot went fine..all working great.
I've installed the latest (v73) official xposed for android 5.1 over romracer's unofficial one and didn't have any issues. First boot, all good! All modules works great..
Same here all works fine
Powered by SkyDragon ROM
Ask working here in Leedroid with screen off animation and gfe
I can't get it to work. I installed the xposed.apk from the link http://forum.xda-developers.com/showthread.php?t=3034811 which is version 3 alpha 4 and then flashed the framework in TWRP, which is the xposed-v75-sdk22-arm64.zip file. I have an HTC One m9 running android 5.1. When I reboot, it shows that "version 75" is installed in xposed but when I try to run any xposed requiring app it doesn't work. For example, MinminGuard says "Xposed is not enabled".
Is there ANYTHING I can do??
Veraster said:
I can't get it to work. I installed the xposed.apk from the link http://forum.xda-developers.com/showthread.php?t=3034811 which is version 3 alpha 4 and then flashed the framework in TWRP, which is the xposed-v75-sdk22-arm64.zip file. I have an HTC One m9 running android 5.1. When I reboot, it shows that "version 75" is installed in xposed but when I try to run any xposed requiring app it doesn't work. For example, MinminGuard says "Xposed is not enabled".
Is there ANYTHING I can do??
Click to expand...
Click to collapse
Did you enable the module? Go to Xposed app - Modules - Click the tick boxes - Reboot
Yeah the modules were already enabled. I ended up finding what was causing the problem. I had to go into Super SU and change default access to "Grant" and checked the "Enable su during boot" box. That finally made it work.
Hey guys, just looking for some advice. Currently I am rooted on my LG G3. Im new to rooting and xposed and Android for that matter but managed to figure out the root and flashing roms and stuff. So when i download Xposed, then boot into recover and install the Arm 21 file, it installs fine but then i try and use my camera and it just has a black screen. Also the messenger apps dont work either. I am just wondering why this is happening when everything else is working just fine. I have tried downloading 3rd party camera and messaging apps and still the same thing happens. Any advice would be awesome! thanks.
P.s. I have unrooted and then re rooted and tried it all again and the same thing happens. So i removed Xposed and Arm21 file and then flashed CLOUDY and the camera and msg apps work again. I have not tried installing Xposed installer and the ARM21 file while having CLOUDY installed. Just dont want to ruin the camera from working .
Ok, just rooted my Samsung Glaxy Tab 3 SM-T210R android version 4.4.2. Used TWRP and SuperSU. Tablet seems to be running fine, it will connect to my wifi network but then it is super super slow, so slow it is unusable. Not sure what to do now. This is my first attempt at rooting anything.
The reason I rooted my tab was to be able to remove bloatware and move apps to external sd. So any help doing that would be appreciated as well. I can't download any apps to do thatuntil I fix the wifi problem
Please help!
Dorsant said:
Ok, just rooted my Samsung Glaxy Tab 3 SM-T210R android version 4.4.2. Used TWRP and SuperSU. Tablet seems to be running fine, it will connect to my wifi network but then it is super super slow, so slow it is unusable. Not sure what to do now. This is my first attempt at rooting anything.
The reason I rooted my tab was to be able to remove bloatware and move apps to external sd. So any help doing that would be appreciated as well. I can't download any apps to do thatuntil I fix the wifi problem
Please help!
Click to expand...
Click to collapse
Date and Time were changed after rooting my tab. Tried opening chrome and it gave me an error prompting me to update date and time. After doing this for whatever reason Play store is now working again and was able to download App Manager III (App 2 SD), will try that for moving apps.
Dorsant said:
Ok, just rooted my Samsung Glaxy Tab 3 SM-T210R android version 4.4.2. Used TWRP and SuperSU. Tablet seems to be running fine, it will connect to my wifi network but then it is super super slow, so slow it is unusable. Not sure what to do now. This is my first attempt at rooting anything.
The reason I rooted my tab was to be able to remove bloatware and move apps to external sd. So any help doing that would be appreciated as well. I can't download any apps to do thatuntil I fix the wifi problem
Please help!
Click to expand...
Click to collapse
same thing here. i am trying to figure out how to get it back to the stock rom unrooted. if you figure it out please post something.
i tried to flash older stock roms that i found but when i do the wifi just stops working. when i go to enable it it immediately turns off. also i will randomly get "process system isn't responding"
stuck with a tablet that i can't use now
so i got mine working again by installing the latest (T217SVPUBNK1) from sammobile http://www.sammobile.com/firmwares/download/40786/T217SVPUBNK1_T217SSPTBNK1_SPR/
via odin. it seems to be working fine once again
I have heard xposed having lag and battery issues with the grace UX. Anyone have xposed working fine?
Thanks
Brava27 said:
I have heard xposed having lag and battery issues with the grace UX. Anyone have xposed working fine?
Thanks
Click to expand...
Click to collapse
Not sure if Xposed is causing my lack of deep sleep (it wasnt linked to Xposed when I had the same problem after rooting my Note 5..), but everything else seems to be perfect. Mind you, I'm using the N930W8 with Sprint's userdebug, rooted, but all is good! Just have to pin down this battery draining problem.
Does anyone have root and xposed working fine on N930F or N930FD?
EasyWorld said:
Does anyone have root and xposed working fine on N930F or N930FD?
Click to expand...
Click to collapse
Nope hardly not, I tried more than 2 days on the N930F for Xposed (FD is same firmware apparently). Wanams, Official, Systemless Magick. I think it might have to do with Samsung's new OS Grace updates or the fact of encyption. Who knows? Unless someone makes special changes to Kernel or Wanam's Xposed, it will be very hard.
I'm not telling you this for simple fact, Hydra-Rom (Not sure) might be getting closer with own kernel and no doubt that at least some development will happen when Wanam and Chainfire get a Note 7. So my advice is to wait out, backup with titanium backup now that SuperSu works.
And wait until that sweet day or month comes and behold the glory. At least, it's not a Priv in security lockdowns.
EasyWorld said:
Does anyone have root and xposed working fine on N930F or N930FD?
Click to expand...
Click to collapse
Don't take me on my word for this but booting with the latest Hydra Rom 1.15 and it's kernel, Xposed at least so far works without lag and start boot optimization. (Wanam's and N390F)
Haven't fully test Kernel or Xposed Modules (Like 3+) but seems to be going better than super lag or battery death. (New Kernel disabled encryption)
Again, might be something looking into.
EDIT 1: Was working quite well, enabled some modules like Greenify and XinternalSD. Seems like bootloop now affecting my phone, either enabling one of these modules with some settings bootlooped my phone or xposed is simply not just ready yet. Either ways, the very fact that no optimization was needed at the start (Rebooted tons of times to make sure) is progress.
EDIT 2: Don't know what I did, but just manually shut down phone and Phone booted up. I sense some lag (Might be placebo) but Xposed is working. Along with more SuperSu apps not crashing, again I reckon because Kernel disable encryption allowing mounting of /data. If you have the time, try out the new rom with kernel, seems to be getting closer.
Hello guys
I'm experiencing the following issue:
I am trying to install the latest Oxygen OS update on my OP3 (talking about 3.2.8). I can do so and at first it works fine, but as soon as I activate Xposed (not the framework itself, that's no problem at all. It's appearently ANY module that needs to be activated) the booting process doesn't finish and I get stuck on boot-animation-screen. Has anybody experienced the same issue or even found a way to fix it?
Also, the Xposed Uninstaller ZIP doesn't seem to work on the OP3. It failes. And any time I want to try again I need to restore a hole Nandroid. Is that a known (or fixed) issue?
Here's some backround info:
- It's not just my phone, same issue on my sister's
- Root and Xposed framework themselves are no problem. Issue starts when activating any Xposed-module
- Xposed worked flawlessly on previous version
- I tried it several times
Would really appreciate any feedback, even just if it's a known issue!
Thanx
What xposed version are you using?
Use xposed v87 , it will work fine then
Or you can try the systemless xposed.