http://forum.xda-developers.com/showthread.php?t=3074586
I had been using it for the last 2 days with out any problems.
Same here!!
But when I install Smart Alarm Icon & XInstaller at the same time ,and I reboot to see if the two Xposed app works.
However, I got stuck on the boot screen.
Yet, I haven't tried to install each app at a time, so I dunno which app caused the problem...
jasonlee0315 said:
Same here!!
But when I install Smart Alarm Icon & XInstaller at the same time ,and I reboot to see if the two Xposed app works.
However, I got stuck on the boot screen.
Yet, I haven't tried to install each app at a time, so I dunno which app caused the problem...
Click to expand...
Click to collapse
I was running it on ARHD but got some weird ram overflow..
It just stacked my 3GB completely full untill the phone became unresponsive so I had to restore a nandroid to fix it..
Weird issue, it might have been one of the modules..
Just waiting till official 64bit version comes out I think...
Hi all
Would like to install exposed, any news on the 64bit version and or the bugs mentioned?
Cheers
blocka said:
Hi all
Would like to install exposed, any news on the 64bit version and or the bugs mentioned?
Cheers
Click to expand...
Click to collapse
If you are using 5.1 can find all info here, If you want to use Install xposed-v70-sdk22-arm64-by-romracer-20150808.zip is what you need and you can get the APK here
If using 5.0.2 use link in OP
thanks liam_davenport
I've been looking for a guide or instructions on how to recover from a boot loop but haven't been to successful in finding anything worthwhile. So wanted to ask here, if it does happen (not that it will) I just want to cover my bases and know beforehand how to recover from a boot loop. Obviously part of the recovery process would be to have taken a NAN backup prior to installing the xposed framework, to recover it's a process of booting into recovery and restoring the NAND?
Really looking forward to getting this on my phone.
Thanks guys.
There is an uninstaller zip available, flash it when you experience a bootloop ( http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979 ) . Otherwise just flash your rom new, that works as well. Then deactivate all your modules and start reactivating them one by one, you might have an incompatible module running,, which causes it
I've not gotten this to work so far. I'm on 5.1 stock rooted, s-on. Booted up successfully after installing the zip, but when I launched Amplify it says xposed isnt active.
When i went to check in xposed, it says romracer 71 active though. A little help anyone?
Sent from my HTC One M9 using Tapatalk
neverborn said:
I've not gotten this to work so far. I'm on 5.1 stock rooted, s-on. Booted up successfully after installing the zip, but when I launched Amplify it says xposed isnt active.
When i went to check in xposed, it says romracer 71 active though. A little help anyone?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Did you activate the module?
I did, yes. However, it does seem like Xposed just won't work with stock 5.1 / odex / S-OFF; bootloops abound.
I've resorted to ARHD 12 to get it to work.
neverborn said:
I did, yes. However, it does seem like Xposed just won't work with stock 5.1 / odex / S-OFF; bootloops abound.
I've resorted to ARHD 12 to get it to work.
Click to expand...
Click to collapse
It does work with rooted stock 5.1 s-on though. Sometimes it requires the 2 button reboot. It occasionally sticks at the splash screen but not often. I have used Greenify, Sense Toolbox for Sense 6 and 7 (which has lots of cool features like 12 mini quick toggles and status bar and notification hiding), Always Correct for password memory on my keyboard, YouTube Ad Away, X Hangouts which allows custom theming and features and YouTube Background Playback.. All working great here with the Romracer sdk22 arm64 5.1 framework zip and Xposed Installer 3.0 alpha 4
Sent from my M9 using Xparent Gray Tapatalk 2
Thanks for letting me know. On the other hand, i can stick with ARHD as it's been so stable so far.
Sent from my HTC One M9 using Tapatalk
There is an official 5.1 x64 version now..
oemfoefoee said:
There is an official 5.1 x64 version now..
Click to expand...
Click to collapse
True that, just flashed...first boot was not successful or maybe I wasn't patient enough but the second boot went fine..all working great.
I've installed the latest (v73) official xposed for android 5.1 over romracer's unofficial one and didn't have any issues. First boot, all good! All modules works great..
Same here all works fine
Powered by SkyDragon ROM
Ask working here in Leedroid with screen off animation and gfe
I can't get it to work. I installed the xposed.apk from the link http://forum.xda-developers.com/showthread.php?t=3034811 which is version 3 alpha 4 and then flashed the framework in TWRP, which is the xposed-v75-sdk22-arm64.zip file. I have an HTC One m9 running android 5.1. When I reboot, it shows that "version 75" is installed in xposed but when I try to run any xposed requiring app it doesn't work. For example, MinminGuard says "Xposed is not enabled".
Is there ANYTHING I can do??
Veraster said:
I can't get it to work. I installed the xposed.apk from the link http://forum.xda-developers.com/showthread.php?t=3034811 which is version 3 alpha 4 and then flashed the framework in TWRP, which is the xposed-v75-sdk22-arm64.zip file. I have an HTC One m9 running android 5.1. When I reboot, it shows that "version 75" is installed in xposed but when I try to run any xposed requiring app it doesn't work. For example, MinminGuard says "Xposed is not enabled".
Is there ANYTHING I can do??
Click to expand...
Click to collapse
Did you enable the module? Go to Xposed app - Modules - Click the tick boxes - Reboot
Yeah the modules were already enabled. I ended up finding what was causing the problem. I had to go into Super SU and change default access to "Grant" and checked the "Enable su during boot" box. That finally made it work.
Related
Here's the thing:
- I love Greenify and I really update mine regularly...so I tried to update whilst on Android ART
- I have the xposed framework at my disposal with my stock (rooted) Nexus 7 2013 4.4
- I updated and then I installed/update the thing in the first menu of the xposed framework and then from there I pressed "soft reboot"
Now it doesn't want to proceed to my launcher or anything. It's a soft-brick.
Any help/tip is appreciated.
Can you get into Safe Mode? If so you can try and remove the app, etc.
Can't post the link so:
Reboot to safe mode
If you’re experiencing issues - such as apps crashing, reboots, or fast battery drain - on your device, they could be caused by a third-party app. To check if this is the case, you can start up your device in safe mode, which temporarily disables third-party apps that you’ve installed.
Ensure your device's screen is on, then press & hold the Power button.
Touch & hold the Power off option in the dialog box.
Touch OK in the following dialog to start safe mode.
Try using your device in safe mode to see if the problem persists. If it doesn't, restart your device to get it out of safe mode and uninstall recently installed apps to see if you can pinpoint the one that’s causing the problem.
Xposed doesn't support KitKat yet. Sure you might be able to install the framework but modules have no effect. The developer is waiting for his N5 to arrive before working on a fix so sit tight and keep an eye on this thread for updates: http://forum.xda-developers.com/showthread.php?t=1574401
AlderCass said:
Xposed doesn't support KitKat yet. Sure you might be able to install the framework but modules have no effect. The developer is waiting for his N5 to arrive before working on a fix so sit tight and keep an eye on this thread for updates: http://forum.xda-developers.com/showthread.php?t=1574401
Click to expand...
Click to collapse
Even installing the framework makes my n7 hang on boot.
lastdeadmouse said:
Even installing the framework makes my n7 hang on boot.
Click to expand...
Click to collapse
I haven't tried it on the N7 but on the N4 it installed but no modules worked. But the solution for now is just don't use Xposed until a 4.4 version becomes available.
AlderCass said:
I haven't tried it on the N7 but on the N4 it installed but no modules worked. But the solution for now is just don't use Xposed until a 4.4 version becomes available.
Click to expand...
Click to collapse
Well according to the play store page of Greenify, the reason why i wanted to update is because they released a supposed to be new xposed patch for 4.4 android art users which is what i used. Had to dirty flash the rom to get this running again ugh. :/
Sent from my Nexus 7 using Tapatalk
Use the old version of Greenify...that's what I'm doing.
I also had to flash the ROM again.....lost my progress of lots of games.........:-/
I just bumped my lollipop rom and install xposed then I noticed that my phone shows out "android is upgrading" on every reboot. Is there any way to fix this as it is a little annoying...:crying:
Sorry for my broken English
+1 !
afaik its just a side effect of using the alpha build of xposed. sure, it can get annoying, but having xposed and this 'issue' is better than, well you know.
kp_q said:
afaik its just a side effect of using the alpha build of xposed. sure, it can get annoying, but having xposed and this 'issue' and better than, well you know.
Click to expand...
Click to collapse
This activity tends to get lengthier after every reboot. I've found that once it "seems" to loop in the "Android is upgrading" screen, to remove the battery, boot into recovery, wipe the Dalvik cache, and reboot. It will go through the lengthy procedure of updating software, but will boot a WHOLE lot faster after that.
There is a fix to that. I have the same problem that started after installing xposed on my s4 lollipop. I was able to get rid of the "androidis upgrading". the one that shows you how many apps are being installed. Now, it goes straight to "starting apps". This is not a complete fix though, since it should boot straight up but at least, it's a lot faster now. Use lucky patcher then use the option "remove all odex". That fixed the issue for me. Though not 100% fixed.
abbey666 said:
There is a fix to that. I have the same problem that started after installing xposed on my s4 lollipop. I was able to get rid of the "androidis upgrading". the one that shows you how many apps are being installed. Now, it goes straight to "starting apps". This is not a complete fix though, since it should boot straight up but at least, it's a lot faster now. Use lucky patcher then use the option "remove all odex". That fixed the issue for me. Though not 100% fixed.
Click to expand...
Click to collapse
I tried this method but it didn't work, and there are still 3 apps that are being "optimized" on every boot. Is there any way to find out which apps these are?
alqoshi4life said:
I tried this method but it didn't work, and there are still 3 apps that are being "optimized" on every boot. Is there any way to find out which apps these are?
Click to expand...
Click to collapse
Try to change the version of Xposed installer and see if that fixes the problem. By the way, the problem is 100% fixed now on my phone. I used lucky patcher to remove all odex files. I also installed another version of Xposed. The latest one did not work well so used an older version.
abbey666 said:
Try to change the version of Xposed installer and see if that fixes the problem. By the way, the problem is 100% fixed now on my phone. I used lucky patcher to remove all odex files. I also installed another version of Xposed. The latest one did not work well so used an older version.
Click to expand...
Click to collapse
Which Xposed version did you use? I'm on v68 right now which is the latest. I had v67 and it did the same thing.
V66. I tried2 later versions but this one worked for me.
I have a Oneplus One but I have the same issue. Every damn boot. Android is starting. optimizing app 1 of 121.
I also have the latest version of xposed.
I know not the forum for the OPO but just thought I'd let you guys know other phones face it too and hopefully find a solution to this.
I had to make a really important call and my phone restarted all on its own. That's bad enough but add to the random restart sitting for 5 minutes to wait for android to finish optimizing
abbey666 said:
V66. I tried2 later versions but this one worked for me.
Click to expand...
Click to collapse
I tried v66 like you recommended and the same thing happened. So it must be something else that solved your problem. I guess I can live with it though.
have the same problem with my g3.. everybody have data backup ? )
BlackGodRaven said:
have the same problem with my g3.. everybody have data backup ? )
Click to expand...
Click to collapse
Try the newest Xposed framework v69. Solved my problem completely after a dalvik cache wipe.
alqoshi4life said:
Try the newest Xposed framework v69. Solved my problem completely after a dalvik cache wipe.
Click to expand...
Click to collapse
l solved it too ) l transfer backup to sd card )
abbey666 said:
There is a fix to that. I have the same problem that started after installing xposed on my s4 lollipop. I was able to get rid of the "androidis upgrading". the one that shows you how many apps are being installed. Now, it goes straight to "starting apps". This is not a complete fix though, since it should boot straight up but at least, it's a lot faster now. Use lucky patcher then use the option "remove all odex". That fixed the issue for me. Though not 100% fixed.
Click to expand...
Click to collapse
Trying this now...my G3 crashes for whatever reason from time to time after my Tasker that disables bluetooth as soon as the USB power is disconnected from the car.
Currently on version 79. Patched it with Lucky Pater and removed all odex; rebooted (got stuck but battery out & booted normally).
I'll report if there are any further issues
Okay it's very odd it seems like there's an issue with my LG G3 disconnecting bluetooth from the stock head unit in '13 WRX. If I try pushing the power button off on the radio then shut off the engine (Tasker shuts down bluetooth) then I don't seem to have this issue with the phone crashing. I've yet to have the phone crash if it's on A/C power and Tasker performs the same function.
So this thread will be about the general state of Xposed on our shield TV's. If you have any questions or need help related to Xposed on the Shield TV, feel free to ask.
First Things First, Xposed does work on the 2.1 firmware. (If someone on the Vulcan preview could chime in about 3.0 that would be great.)
Steps to install Xposed on 2.1 (Assuming you already have a working recovery)
1) Download xposed-vXX-sdk22-arm64.zip and XposedInstaller_3.0_alpha4.apk from this thread.
either adb push it to /sdcard/ or use a thumb drive etc etc.
2) ADB reboot recovery
3) Preform a full backup IMPORTANT (I did 2 backups, one to internal storage, and another to external usb, better safe than sorry!)
4) Flash xposed-vXX-sdk22-arm64.zip (Wiping cache after is optional)
4) Reboot to system, Booting will take longer than usual, it took about 5 minutes on my 16gb, but could take longer.
5) Install XposedInstaller_3.0_alpha4.apk (ES file explorer works great for this, you can download it from playstore)
6) Open up Xposed installer once installed, select framework, and it should show Xposed framework version 80 is active. If not, repeat steps 1-4, If you're still having problems, ask here. From the installer you can install modules, just make sure to activate them and reboot!
Steps to install Xposed on 3.0 MM (with a working recovery)
1) Download xposed-vXX-sdk23-arm64.zip and XposedInstaller_3.0_alpha4.apk from this thread.
either adb push it to /sdcard/ or use a thumb drive etc etc.
2) ADB reboot recovery
3) Preform a full backup IMPORTANT (I did 2 backups, one to internal storage, and another to external usb, better safe than sorry!)
4) Flash xposed-vXX-sdk23-arm64.zip (Wiping cache after is optional)
4) Reboot to system, Booting will take longer than usual, it took about 5 minutes on my 16gb, but could take longer.
5) Install XposedInstaller_3.0_alpha4.apk (ES file explorer works great for this, you can download it from playstore)
6) Open up Xposed installer once installed, select framework, and it should show Xposed framework version 80 is active. If not, repeat steps 1-4, If you're still having problems, ask here. From the installer you can install modules, just make sure to activate them and reboot!
I've only tried 2 modules so far, one works, one doesn't. If You have tried a module and it does or doesn't work, please comment with the version and I'll add it to this list.
WORKING
NoSafeVolumeWarning V1.7 Stable (http://forum.xda-developers.com/xposed/modules/module-nosafevolumewarning-t2718933/)
App Settings (http://repo.xposed.info/module/de.robv.android.xposed.mods.appsettings) (Thanks Andy4Shurr)
Xprivacy http://forum.xda-developers.com/xposed/modules/xprivacy-ultimate-android-privacy-app-t2320783 (thanks Bradwatson and banderos101)
NOT WORKING
Youtube Adaway V3.1.1 (http://forum.xda-developers.com/xposed/modules/app-t2547316)
Reservado
happydish said:
Reservado
Click to expand...
Click to collapse
Also Reserved, just in case.
Hi,
Have you tried with shield 3.0? Does it works with systemless root?
Change in install procedure?
Thank you for your feedback
olivier.bossaer said:
Hi,
Have you tried with shield 3.0? Does it works with systemless root?
Change in install procedure?
Thank you for your feedback
Click to expand...
Click to collapse
Haven't tried it yet, been super busy with school, currently running 3.0 stock (not even rooted). If you try it, let me know if it works! I don't see why it shouldn't
olivier.bossaer said:
Hi,
Have you tried with shield 3.0? Does it works with systemless root?
Change in install procedure?
Thank you for your feedback
Click to expand...
Click to collapse
Nope, did not work for me
after flashing the zip it keeps booting forever
Arf!
I haven't time to test now.
But seems unfortunate...
Hope there will be a workaround!
Envoyé de mon Nexus 6 en utilisant Tapatalk
I installed Xposed on the 3.0 update. Had no issues. Also installed Xprivacy. Hoping to bypass mlb blackouts with mlb.TV.
I went through the standard process for installing it. Basically the exact steps of the OP but the newest version of the framework.
Sent from my XT1575 using Tapatalk
App Settings module works perfectly.
Xposed and root are working fine for me on 3.0 update, I'll write another guide maybe later today, but the steps are the same, just with the updated zip (SDK 23 for MM).
Brad, is Xprivacy working for you? Any problems?
happydish said:
Xposed and root are working fine for me on 3.0 update, I'll write another guide maybe later today, but the steps are the same, just with the updated zip (SDK 23 for MM).
Brad, is Xprivacy working for you? Any problems?
Click to expand...
Click to collapse
I can also confirm sucess with the sdk23 MM latest version and shield marshmellow
Xprivacy seems to be working well, except ondemand doesnt seem to pop up for any, or at least some, of the storage restrictions..........im not sure if xprivacy has been updated for marshmellow, so im not sure if storage restriction is working, i will pay attention next time i install an app from scratch........
Andy4Shurr said:
App Settings module works perfectly.
Click to expand...
Click to collapse
Andy can u help me.I have installed xposed and it says it is active.Than i instaled App Settings and when i try to change Dpi or other app setting nothing happens.(i have stock 6.0 ...3.0 rooted)
Installed root and xposed on 3.0 no problems, just needed to use pen stick because adaptive storage. Cannot seem to access the bootloader via hardware method (wait 3 secs then hold power button). I Tried many variations of it to no avail... Also I have to reflash the boot loader every time to access it. If I choose kernel recovery from bootloader it just shows the android with a warning / error.
Using Xposed mod Unbeloved Hosts and Lucky Patcher. Between the two I can filter 99% of all ads.
keep getting a error when tryin to flash with twrp on my nvidia shield tv whats is the corret zip for my device? Thanks all.
K I got Xposed installed MM 3.0 But when I use KODI if I have a stream playing it stops a few mins in, If I stop all of the modules in xposed and restart KODI Starts to work again, no probleems streaming. So it has to be Xposed or one of the modules I was using. Luck Patcher, App settings, Xprivecy, yourtube, MinGaurd (Not sure full name der) , YouTube AdAway.
Just installed the latest version of Xposed following the steps on the guide. I'm on 3.3 update, rooted. No problems so far. Will test some modules and report back.
joelcool69 said:
Just installed the latest version of Xposed following the steps on the guide. I'm on 3.3 update, rooted. No problems so far. Will test some modules and report back.
Click to expand...
Click to collapse
I finally unlocked my bootloader and rooted my Shield after using it for about a year. I use Xposed regularly on my Nexus 6P but wanted to know if anyone has information about Youtube Adaway Module working (or alternative). So far seems like it doesn't work everywhere.
Are there any other modules worth getting on Xposed for Android TV? Perhaps something for Xbox 360 Controllers?
Also would be very interested in Youtube HDR if anyone has a workaround seeing that it's supported officially by Youtube but their Youtube for Android TV app literally hasn't been updated since April so I take it we'll have to wait a few months. Not fun considering my 4K HDR tv has been waiting a year for this.
Thanks in Advance.
copticwalad said:
I finally unlocked my bootloader and rooted my Shield after using it for about a year. I use Xposed regularly on my Nexus 6P but wanted to know if anyone has information about Youtube Adaway Module working (or alternative). So far seems like it doesn't work everywhere.
Are there any other modules worth getting on Xposed for Android TV? Perhaps something for Xbox 360 Controllers?
Also would be very interested in Youtube HDR if anyone has a workaround seeing that it's supported officially by Youtube but their Youtube for Android TV app literally hasn't been updated since April so I take it we'll have to wait a few months. Not fun considering my 4K HDR tv has been waiting a year for this.
Thanks in Advance.
Click to expand...
Click to collapse
Well, Youtube Adaway Module it's working for me. About 1 hr of continuous playback and no one single ad. Xprivacy and Marshmallow SD Fix working too.
Now that Nougat has been out for months and Xposed not working on it, has anyone figured out a way to block Youtube ads? I know arter97 has patched youtube apks but nothing yet for the Shield.
Does Adguard work on Android TV?
https://www.google.com/amp/s/forum....ed/unofficial-systemless-xposed-t3388268/amp/
The thing is.... I went to the app to get the program and Magisk wouldn't install the program on it's end. Took a shot and installed the apk (SDK 25), then installed the 88.1 version shown in the picture (now 88.2) rebooted and waited to "upgrade" itself.... But here it is plain as day. I'm not saying you may get it running on yours but it worked for me. Happy testing y'all,
SykkNyzz
And apparently Gravity Box for Nougat just came out 2 days ago at the time of this post.
Just ticked to center the time. Perfecto.
Reboot and such work as well
Nav Bar as well (note swapped buttons and added menu)
Even the Expanded Desktop works.
I can't get any modules to install in magisk on this phone. Tried systemless Xposed and nothing. How did you install it?
That looks like system install. Systemless usually says it like in this screenshot.
Did you install magisk with the zip in recovery, or modified boot.img? Systemless Xposed would be nice, hoping to get working on mine.
madbat99 said:
I can't get any modules to install in magisk on this phone. Tried systemless Xposed and nothing. How did you install it?
That looks like system install. Systemless usually says it like in this screenshot.
Did you install magisk with the zip in recovery, or modified boot.img? Systemless Xposed would be nice, hoping to get working on mine.
Click to expand...
Click to collapse
I couldn't use the Magisk even to this moment. I just used the apk listed above and did it that way
SykkNyzz said:
I couldn't use the Magisk even to this moment. I just used the apk listed above and did it that way
Click to expand...
Click to collapse
OK. I got system install working on mine too. Yours looks like system install too, not systemless. The xposed app downloads normal system install. You should change the name of the thread since it's not actually systemless. Just to avoid confusion.
madbat99 said:
OK. I got system install working on mine too. Yours looks like system install too, not systemless. The xposed app downloads normal system install. You should change the name of the thread since it's not actually systemless. Just to avoid confusion.
Click to expand...
Click to collapse
Well, the app itself from the website is stated as such. As where I can see where you are coming from. Thank you for the heads up.
SykkNyzz said:
Well, the app itself from the website is stated as such. As where I can see where you are coming from. Thank you for the heads up.
Click to expand...
Click to collapse
I can't get any magisk modules to work either, I was genuinely hoping you had it here. I've noticed you're pretty active in the forums for this phone.
Glad you showed xposed working, it helped me decide to try it.
Hi all,
I have installed Magisk 16.0 based on Maik93's post, and Xposed Framework SDK27 90.2-beta3 (Systemless), through Magisk modules.
When I enable the Xposed module, the phone first shows endless boot animation, and when restarting it again, it boots, but the Xposed app seems not installed (not listed in Settings->Apps and its icon is not present in chooser), although, in Magisk, it is visible in the Modules and it's checkbox is checked.
Did anybody successfully installed Xposed with A2 Lite? What can be the problem?
Thanks a lot,
Circum
Did you install the apk of xposed?
---------- Post added at 11:51 PM ---------- Previous post was at 11:46 PM ----------
https://forum.xda-developers.com/attachment.php?attachmentid=4393082&d=1516301692
Here is the link from xda
No, sorry, I was not aware that it is a separate thing.
Now I have installed, but it says that no Xposed Framework is installed. If I try to install a framework from inside the installer (90-beta3), it -- obviously -- reports an error that /system/framework/XposedBridge.jar already exist...
Because of this, I cannot enable any module from Xposed Installer.
Any tips what do I do wrong?
I want to use Xposed too but we will have to wait for TWRP I guess.
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
mik.y said:
I want to use Xposed too but we will have to wait for TWRP I guess.
Click to expand...
Click to collapse
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
HoangP05 said:
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
Click to expand...
Click to collapse
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
mik.y said:
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
Click to expand...
Click to collapse
Not all are working apparently, but if it is bootloop, you so try to let it boot again, press power and volume down as the same time while it bootloop, the second boot always work for me
There is TWRP for Mi A2 Lite.
Search on google.
NOTICE: For now there isn't official TWRP. There'w unofficiak fork which can you install using fastboot. :good:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
HoangP05 said:
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
Click to expand...
Click to collapse
Xposed's Gravity box module works on Mi A2 lite?
Yes, GravityBox is working, although as I mentioned, there are issues with boot - I have to reboot several times until it succeeds...
performace drops significantly when i install the xposed module for magisk. i hope they fix it.
So far everything works fine on my end, I'm not noticing any performance drops in my day to day use. Then again I haven't used it much without Magisk + exposed but from what i'm seeing it's working well, no noticeable lag or stuttering.
I have gravity box, Amplify and Greenify modules running.
circum said:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
Click to expand...
Click to collapse
Magisk alone didnt give me boot problems. What rooting guide did you follow?
fake__knv said:
Magisk alone didnt give me boot problems. What rooting guide did you follow?
Click to expand...
Click to collapse
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
circum said:
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
Click to expand...
Click to collapse
I can assure you @BubuXP's guide is good. Used his rooting guide, followed the steps for updates and its good to go. I rooted my phone when Im on August update. Now Im in September update