Develop Bugs

Xposed for the one m9

http://forum.xda-developers.com/showthread.php?t=3074586
I had been using it for the last 2 days with out any problems.

Same here!!
But when I install Smart Alarm Icon & XInstaller at the same time ,and I reboot to see if the two Xposed app works.
However, I got stuck on the boot screen.
Yet, I haven't tried to install each app at a time, so I dunno which app caused the problem...

jasonlee0315 said:
Same here!!
But when I install Smart Alarm Icon & XInstaller at the same time ,and I reboot to see if the two Xposed app works.
However, I got stuck on the boot screen.
Yet, I haven't tried to install each app at a time, so I dunno which app caused the problem...
Click to expand...
Click to collapse
I was running it on ARHD but got some weird ram overflow..
It just stacked my 3GB completely full untill the phone became unresponsive so I had to restore a nandroid to fix it..
Weird issue, it might have been one of the modules..
Just waiting till official 64bit version comes out I think...

Hi all
Would like to install exposed, any news on the 64bit version and or the bugs mentioned?
Cheers

blocka said:
Hi all
Would like to install exposed, any news on the 64bit version and or the bugs mentioned?
Cheers
Click to expand...
Click to collapse
If you are using 5.1 can find all info here, If you want to use Install xposed-v70-sdk22-arm64-by-romracer-20150808.zip is what you need and you can get the APK here
If using 5.0.2 use link in OP

thanks liam_davenport
I've been looking for a guide or instructions on how to recover from a boot loop but haven't been to successful in finding anything worthwhile. So wanted to ask here, if it does happen (not that it will) I just want to cover my bases and know beforehand how to recover from a boot loop. Obviously part of the recovery process would be to have taken a NAN backup prior to installing the xposed framework, to recover it's a process of booting into recovery and restoring the NAND?
Really looking forward to getting this on my phone.
Thanks guys.

There is an uninstaller zip available, flash it when you experience a bootloop ( http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979 ) . Otherwise just flash your rom new, that works as well. Then deactivate all your modules and start reactivating them one by one, you might have an incompatible module running,, which causes it

I've not gotten this to work so far. I'm on 5.1 stock rooted, s-on. Booted up successfully after installing the zip, but when I launched Amplify it says xposed isnt active.
When i went to check in xposed, it says romracer 71 active though. A little help anyone?
Sent from my HTC One M9 using Tapatalk

neverborn said:
I've not gotten this to work so far. I'm on 5.1 stock rooted, s-on. Booted up successfully after installing the zip, but when I launched Amplify it says xposed isnt active.
When i went to check in xposed, it says romracer 71 active though. A little help anyone?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Did you activate the module?

I did, yes. However, it does seem like Xposed just won't work with stock 5.1 / odex / S-OFF; bootloops abound.
I've resorted to ARHD 12 to get it to work.

neverborn said:
I did, yes. However, it does seem like Xposed just won't work with stock 5.1 / odex / S-OFF; bootloops abound.
I've resorted to ARHD 12 to get it to work.
Click to expand...
Click to collapse
It does work with rooted stock 5.1 s-on though. Sometimes it requires the 2 button reboot. It occasionally sticks at the splash screen but not often. I have used Greenify, Sense Toolbox for Sense 6 and 7 (which has lots of cool features like 12 mini quick toggles and status bar and notification hiding), Always Correct for password memory on my keyboard, YouTube Ad Away, X Hangouts which allows custom theming and features and YouTube Background Playback.. All working great here with the Romracer sdk22 arm64 5.1 framework zip and Xposed Installer 3.0 alpha 4
Sent from my M9 using Xparent Gray Tapatalk 2

Thanks for letting me know. On the other hand, i can stick with ARHD as it's been so stable so far.
Sent from my HTC One M9 using Tapatalk

There is an official 5.1 x64 version now..

oemfoefoee said:
There is an official 5.1 x64 version now..
Click to expand...
Click to collapse
True that, just flashed...first boot was not successful or maybe I wasn't patient enough but the second boot went fine..all working great.

I've installed the latest (v73) official xposed for android 5.1 over romracer's unofficial one and didn't have any issues. First boot, all good! All modules works great..

Same here all works fine
Powered by SkyDragon ROM

Ask working here in Leedroid with screen off animation and gfe

I can't get it to work. I installed the xposed.apk from the link http://forum.xda-developers.com/showthread.php?t=3034811 which is version 3 alpha 4 and then flashed the framework in TWRP, which is the xposed-v75-sdk22-arm64.zip file. I have an HTC One m9 running android 5.1. When I reboot, it shows that "version 75" is installed in xposed but when I try to run any xposed requiring app it doesn't work. For example, MinminGuard says "Xposed is not enabled".
Is there ANYTHING I can do??

Veraster said:
I can't get it to work. I installed the xposed.apk from the link http://forum.xda-developers.com/showthread.php?t=3034811 which is version 3 alpha 4 and then flashed the framework in TWRP, which is the xposed-v75-sdk22-arm64.zip file. I have an HTC One m9 running android 5.1. When I reboot, it shows that "version 75" is installed in xposed but when I try to run any xposed requiring app it doesn't work. For example, MinminGuard says "Xposed is not enabled".
Is there ANYTHING I can do??
Click to expand...
Click to collapse
Did you enable the module? Go to Xposed app - Modules - Click the tick boxes - Reboot

Yeah the modules were already enabled. I ended up finding what was causing the problem. I had to go into Super SU and change default access to "Grant" and checked the "Enable su during boot" box. That finally made it work.

[Q] Fire Phone: SuperSU-me, Xposed Framework and other Issues

Hi,
I just got a fire phone and I'm facing multiple issues. It updated to 4.6.6.1 once i started it. Now I want it to act like a normal android phone so I installed google now launcher.
Next thing i wanted to do is to customize the laucher. So I did research how to root it. Did it with kingroot and afterwards followed various instructions to change to superSu. Non of them worked. Neither via adb nor SuperSU me nor the terminal version. only rooted when on kingsroot. SuperSU binaries also would never succesfuly update. Anyways.
So after I got the root, I wanted to install Xposed Framework to finally customize the launcher. Now xposed is saying, that it is not (yet) compatible wit the ANdorid SDK Version 19 or my Prozessor architecture. (armeabi-v7a)
I'm running the phone on german language. Don't know what to do anymore with both. SUpersu and Xposed. Appreciate any help.

So you already bought Super-Sume-Pro? Good, because removing / replacing Kingroot was possible even with the (early) free version of Super-Sume (9.1.6).
Download this old version* of Kinguser.
Yes, like always, it's classified as a virus / exploit / PUP, because it uses very aggressive methods of achieving root.
"But Bingo, this is only Kinguser, I need Kingroot."
No you don't. I used this combo many times, it always worked, from the latest version down to Fire OS 4.6.1 when I first tried it.
Uninstall your current version of Kingroot / Kinguser and remove the leftover folders from the internal storage.
Install the old version (disable auto update within in the app, it can be quite annoying), let it "achieve" root, disable WiFi if you want.
Run Super-Sume. It will have no problem replacing Kinguser with 2 steps.
Download this compatible version of the Xposed Installer.
Install framework, etc. You know the drill.
For BusyBox, I'd recommend either Stericson's version or Meefik's.
I tested one of my devices with 4.6.6.1 and the above mentioned customizations (mainly to enjoy microG on Fire OS ^^), so I can say it definitely works.
* Had to use OCH, because the "good guys" like Dropbox and Google Drive won't allow hosting / linking this file, since it's a bad azz virüs.

I always found W0lfdroid's script to be quite effective and efficient in removing Kingroot:
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html

Plonko said:
I always found W0lfdroid's script to be quite effective and efficient in removing Kingroot.
Click to expand...
Click to collapse
Ugh, so many letters, I'm so confused, please... no more, let's stay with "dumb it down". This saves time so I can roll around in my own feces. :victory:

Plonko said:
I always found W0lfdroid's script to be quite effective and efficient in removing Kingroot:
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
Click to expand...
Click to collapse
W0lfdorid was one of the versions i tried. no success. I can start the script but then it says failure and every single steps fails. I finally made it to the supersu installed, but it wont update the binaries. installation always failed

coolni said:
W0lfdorid was one of the versions i tried. no success. I can start the script but then it says failure and every single steps fails. I finally made it to the supersu installed, but it wont update the binaries. installation always failed
Click to expand...
Click to collapse
Hmmmm...I don't know what to say. I just used it today after returning a phone to stock Fire OS for my niece. The only thing I can think of is I'm using an earlier version of Kingroot? I'm using KingRoot-4.1.0.524.apk if that matters. I can try to PM it to you, but I'm not sure it will work because, as Bingo mentioned, it is seen as a virus by most servers.

Yup, I also used the oldest version I had on my PC, this way I can avoid the cat and mouse game between Kingroot and Super-Sume ^^ ... well, for the Fire Phone and some "older" KitKat devices that is.
But since 'coolni' popped his Fire Phone cherry just recently, he naturally went for a current version of Kingroot and he's also on the latest Fire OS release; thought process = better bring the big guns so that root is guaranteed.

Bingo Bronson said:
Yup, I also used the oldest version I had on my PC, this way I can avoid the cat and mouse game between Kingroot and Super-Sume ^^ ... well, for the Fire Phone and some "older" KitKat devices that is.
But since 'coolni' popped his Fire Phone cherry just recently, he naturally went for a current version of Kingroot and he's also on the latest Fire OS release; thought process = better bring the big guns so that root is guaranteed.
Click to expand...
Click to collapse
can anybody help to root 4.6.6.1 ?
Kingroot 4.0.0.233 from zip file did not work on my phone with 4.6.6.1.

Having problems on custom recovery
Hello sir I am using amazon 4.6.6.1 almost 1 year ago I have backed up my custom recovery from flashify and deleted accidentally now I need that but can't do anything I have tried most things to get back but can't and also can't root my phone with king root I am installing it but it's saying that app not installed any solution please my email is [email protected]

Specific Variant of Xposed works on Qualcomm's Perry ( APK Link in OP)

https://www.google.com/amp/s/forum....ed/unofficial-systemless-xposed-t3388268/amp/
The thing is.... I went to the app to get the program and Magisk wouldn't install the program on it's end. Took a shot and installed the apk (SDK 25), then installed the 88.1 version shown in the picture (now 88.2) rebooted and waited to "upgrade" itself.... But here it is plain as day. I'm not saying you may get it running on yours but it worked for me. Happy testing y'all,
SykkNyzz

And apparently Gravity Box for Nougat just came out 2 days ago at the time of this post.

Just ticked to center the time. Perfecto.

Reboot and such work as well

Nav Bar as well (note swapped buttons and added menu)

Even the Expanded Desktop works.

I can't get any modules to install in magisk on this phone. Tried systemless Xposed and nothing. How did you install it?
That looks like system install. Systemless usually says it like in this screenshot.
Did you install magisk with the zip in recovery, or modified boot.img? Systemless Xposed would be nice, hoping to get working on mine.

madbat99 said:
I can't get any modules to install in magisk on this phone. Tried systemless Xposed and nothing. How did you install it?
That looks like system install. Systemless usually says it like in this screenshot.
Did you install magisk with the zip in recovery, or modified boot.img? Systemless Xposed would be nice, hoping to get working on mine.
Click to expand...
Click to collapse
I couldn't use the Magisk even to this moment. I just used the apk listed above and did it that way

SykkNyzz said:
I couldn't use the Magisk even to this moment. I just used the apk listed above and did it that way
Click to expand...
Click to collapse
OK. I got system install working on mine too. Yours looks like system install too, not systemless. The xposed app downloads normal system install. You should change the name of the thread since it's not actually systemless. Just to avoid confusion.

madbat99 said:
OK. I got system install working on mine too. Yours looks like system install too, not systemless. The xposed app downloads normal system install. You should change the name of the thread since it's not actually systemless. Just to avoid confusion.
Click to expand...
Click to collapse
Well, the app itself from the website is stated as such. As where I can see where you are coming from. Thank you for the heads up.

SykkNyzz said:
Well, the app itself from the website is stated as such. As where I can see where you are coming from. Thank you for the heads up.
Click to expand...
Click to collapse
I can't get any magisk modules to work either, I was genuinely hoping you had it here. I've noticed you're pretty active in the forums for this phone.
Glad you showed xposed working, it helped me decide to try it.

magisk + xposed problem

Hi all,
I have installed Magisk 16.0 based on Maik93's post, and Xposed Framework SDK27 90.2-beta3 (Systemless), through Magisk modules.
When I enable the Xposed module, the phone first shows endless boot animation, and when restarting it again, it boots, but the Xposed app seems not installed (not listed in Settings->Apps and its icon is not present in chooser), although, in Magisk, it is visible in the Modules and it's checkbox is checked.
Did anybody successfully installed Xposed with A2 Lite? What can be the problem?
Thanks a lot,
Circum

Did you install the apk of xposed?
---------- Post added at 11:51 PM ---------- Previous post was at 11:46 PM ----------
https://forum.xda-developers.com/attachment.php?attachmentid=4393082&d=1516301692
Here is the link from xda

No, sorry, I was not aware that it is a separate thing.
Now I have installed, but it says that no Xposed Framework is installed. If I try to install a framework from inside the installer (90-beta3), it -- obviously -- reports an error that /system/framework/XposedBridge.jar already exist...
Because of this, I cannot enable any module from Xposed Installer.
Any tips what do I do wrong?

I want to use Xposed too but we will have to wait for TWRP I guess.

Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine

mik.y said:
I want to use Xposed too but we will have to wait for TWRP I guess.
Click to expand...
Click to collapse
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img

HoangP05 said:
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
Click to expand...
Click to collapse
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless

mik.y said:
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
Click to expand...
Click to collapse
Not all are working apparently, but if it is bootloop, you so try to let it boot again, press power and volume down as the same time while it bootloop, the second boot always work for me

There is TWRP for Mi A2 Lite.
Search on google.
NOTICE: For now there isn't official TWRP. There'w unofficiak fork which can you install using fastboot. :good:

Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
HoangP05 said:
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
Click to expand...
Click to collapse

Xposed's Gravity box module works on Mi A2 lite?

Yes, GravityBox is working, although as I mentioned, there are issues with boot - I have to reboot several times until it succeeds...

performace drops significantly when i install the xposed module for magisk. i hope they fix it.

So far everything works fine on my end, I'm not noticing any performance drops in my day to day use. Then again I haven't used it much without Magisk + exposed but from what i'm seeing it's working well, no noticeable lag or stuttering.
I have gravity box, Amplify and Greenify modules running.

circum said:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
Click to expand...
Click to collapse
Magisk alone didnt give me boot problems. What rooting guide did you follow?

fake__knv said:
Magisk alone didnt give me boot problems. What rooting guide did you follow?
Click to expand...
Click to collapse
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...

circum said:
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
Click to expand...
Click to collapse
I can assure you @BubuXP's guide is good. Used his rooting guide, followed the steps for updates and its good to go. I rooted my phone when Im on August update. Now Im in September update

Android Q: Viper4android compatible?

I've been trying to get viper4android working on Android q for quite some time but the module and the app itself does not want work at all. Plus when viper asks you to install the driver from the app it will end up in a bootloop. Has anybody found a temp workround for it?
Device: Pixel 2 XL Android version: Q Beta 3

I'm having a similar issue, only the driver install is asked again upon reboot ;_;

Thats only why i rollback from Q.
Total**** sound without

Ok, got it working on beta 3, using the apk 2.7.1.0 from XDA. It appears to install as a magisk module, along with AML. It didn't work on my first try, then all was good. I need to run it in compatibility mode from the menu. https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx

In android P what version did you use?

Always used the magisk repo version before- I tried this many times on Q, with and without AML, but always got the dreaded install driver dialogue. Also tried SE Linux permissive, but no luck. I've never used the apk before, but am sat here now listening to music quite happily. It's survived a couple of reboots (just checking).

1959best said:
Ok, got it working on beta 3, using the apk 2.7.1.0 from XDA. It appears to install as a magisk module, along with AML. It didn't work on my first try, then all was good. I need to run it in compatibility mode from the menu. https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Click to expand...
Click to collapse
Hm, I just tried that. I downloaded the one off XDA LABS and checked compatibility mode on the app. Still showing up as driver not installed. Viper4Android is literally the key element for my phones such a good module.

Try another reboot?

Knxed_ said:
Hm, I just tried that. I downloaded the one off XDA LABS and checked compatibility mode on the app. Still showing up as driver not installed. Viper4Android is literally the key element for my phones such a good module.
Click to expand...
Click to collapse
I just upgraded to Android 10 on my Pixel 2XL and have Viper running now. Download stable 2.7.1.0 from XDA Labs, grant root with Magisk. Check compatibility mode THEN install the driver. Restart, make changes, and then be sure to check "Attach audio effects" in settings once you make your changes.

ifellouttabed said:
I just upgraded to Android 10 on my Pixel 2XL and have Viper running now. Download stable 2.7.1.0 from XDA Labs, grant root with Magisk. Check compatibility mode THEN install the driver. Restart, make changes, and then be sure to check "Attach audio effects" in settings once you make your changes.
Click to expand...
Click to collapse
Mhh doesn't work for me this way.still asking for driver after reboot lol

Thanks. Worked for me on second try. Followed the instructions rebooted didn't work, installed drivers again rebooted and then it worked.

pa.pn2 said:
Mhh doesn't work for me this way.still asking for driver after reboot lol
Click to expand...
Click to collapse
Same here sadly...

sidhaarthm said:
Same here sadly...
Click to expand...
Click to collapse
Ok, here's what you gotta do to get it to work, this is the ONLY method I've had consistently work for me from beta 3-public release(did it an hour ago and worked perfectly)
First, uninstall any viper you have also make sure you completely uninstall audio modification library if you have it installed, not disable, uninstall it and reboot after uninstalling what I've listed.
After you're all booted back up, install viper from labs (link in this thread)(Also, forget about compatibility mode, don't use it) now open viper but do NOT install the driver yet, just open the application then go to magisk and install audio modification library but dont let magisk reboot the phone after it installs. Once installation completed, go back to viper and install the driver and let it reboot. Once booted, go straight to magisk and DISABLE audio modification library (uncheck the box next to it if you dont get what I mean) don't uninstall it. After disabling AML head back to viper and install the driver again. Now once rebooted is the moment of truth, if you open viper and its installed you're obviously done but if it's not installed you have to take this next step: don't install the driver just yet, go to magisk and re-enable AML then back to viper and install the driver. I don't see why this would not work for you guys, I know this isn't the easiest tutorial to follow but make sure you follow it to a T, if you mess any step up you need to start from scratch and uninstall both AML and viper and start again.
Good luck guys and may the audiophile Gods be on your side through this process!

1dopewrx05 said:
Ok, here's what you gotta do to get it to work, this is the ONLY method I've had consistently work for me from beta 3-public release(did it an hour ago and worked perfectly)
First, uninstall any viper you have also make sure you completely uninstall audio modification library if you have it installed, not disable, uninstall it and reboot after uninstalling what I've listed.
After you're all booted back up, install viper from labs (link in this thread)(Also, forget about compatibility mode, don't use it) now open viper but do NOT install the driver yet, just open the application then go to magisk and install audio modification library but dont let magisk reboot the phone after it installs. Once installation completed, go back to viper and install the driver and let it reboot. Once booted, go straight to magisk and DISABLE audio modification library (uncheck the box next to it if you dont get what I mean) don't uninstall it. After disabling AML head back to viper and install the driver again. Now once rebooted is the moment of truth, if you open viper and its installed you're obviously done but if it's not installed you have to take this next step: don't install the driver just yet, go to magisk and re-enable AML then back to viper and install the driver. I don't see why this would not work for you guys, I know this isn't the easiest tutorial to follow but make sure you follow it to a T, if you mess any step up you need to start from scratch and uninstall both AML and viper and start again.
Good luck guys and may the audiophile Gods be on your side through this process!
Click to expand...
Click to collapse
Take a bow good sir, it worked! Had to follow the steps to the end as first time around it didn't work. Now seems to be alright (see attached)
For anyone else wondering, I upgraded from Aug 9.0 build to Q (020) last night by flashing the factory ROM without wipe. Rooted, ads disabled and now ViperFX working. Life is goooood :angel:

sidhaarthm said:
Take a bow good sir, it worked! Had to follow the steps to the end as first time around it didn't work. Now seems to be alright (see attached)
For anyone else wondering, I upgraded from Aug 9.0 build to Q (020) last night by flashing the factory ROM without wipe. Rooted, ads disabled and now ViperFX working. Life is goooood :angel:
Click to expand...
Click to collapse
I think it also worked for me now but in your screeny it says not enabled.same with me.
But i have all the options for speaker headphones usb etc.think it worked

pa.pn2 said:
I think it also worked for me now but in your screeny it says not enabled.same with me.
But i have all the options for speaker headphones usb etc.think it worked
Click to expand...
Click to collapse
Ah yeah, it's probably because I hadn't enabled it until that time. Here's a fresh screenie

sidhaarthm said:
Ah yeah, it's probably because I hadn't enabled it until that time. Here's a fresh screenie
Click to expand...
Click to collapse
what do you mean with didnt enable it?
i did all the steps, i can adjust all settings but if i play something in g music it still says not enabled....what did i miss?

pa.pn2 said:
what do you mean with didnt enable it?
i did all the steps, i can adjust all settings but if i play something in g music it still says not enabled....what did i miss?
Click to expand...
Click to collapse
By enabling, I meant turning on the master limiter and other settings. I adjusted mine with a nice YouTube track playing in the background and it all worked a treat. Yet to do my Bluetooth earphones though

sidhaarthm said:
By enabling, I meant turning on the master limiter and other settings. I adjusted mine with a nice YouTube track playing in the background and it all worked a treat. Yet to do my Bluetooth earphones though
Click to expand...
Click to collapse
I switched on the master and now its working.awesome find

@1dopewrx05 I followed your mini tutorial to a T and it worked perfectly. Thank you for taking the time to do this, I really appreciate it. Just updated my old faithful to 10 earlier and gonna mess around with some of the neat features. I can't live without Viper, it's essential to me.