Develop Bugs

[SCRIPT][BATCH][TOOL]Motorola Moto 360 Super Tool bootloader unlock, root, & Restore

[SCRIPT][BATCH][TOOL]Motorola Moto 360 Super Tool bootloader unlock, root, & Restore
Motorola Moto 360 Super Tool
View attachment 2962247
View attachment 2962248
WARNING USE THIS TOOL AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR BRICKED DEVICES.
That Being said I have tested this on my device many times without any problems
Download the Super Tool HERE
Motorola Moto 360 Super Tool Options
1. Install adb and fastboot drivers from motorola and test them
2. unlock the bootloader of the watch
3. relock the bootloader of the watch
4. flash stock wear recovery image
5. flash stock wear boot image
6. restore your Moto 360 to stock KGW42N official
7. Root the Moto 360
8. flash TWRP recovery
9. boot to TWRP recovery from bootloader mode
VIDEO ON USING THIS TOOL
http://youtu.be/FMrywAnwqZ0
Latest Super Tool Version 5
CHANGE LOG
Version 1
based on KGW42N Firmware
Version 2
based on KGW42R Firmware
CLeaned up batch file script
Version 2.1
Added TWRP recovery
Added Lollipop Root with TWRP recovery and supersu.zip
Added boot to TWRP from Bootloader and removed boot to stock recovery from bootloader
Version 3
Based on LWX48T Firmware Lollipop android 5.0.1
Version 4
Based on LWX49L Firmware Lollipop android 5.0.2
Version 5
Based on LDZ22O Firmware Lollipop android 5.1.1
Requirements to use this Motorola Moto 360 Super tool
USB interface cable. if you need one watch this video on how to make it
Download the Super Tool HERE at RootJunkysdl.com
Know how to remove the watch band. check this VIDEO
May have a Video coming on how to use this tool soon

i downloaded version 2 and again it cannot send the boot.img
i tried to flash stock firmware and on the sending 'motoboot' it says FAILED data transfer failure (too many links)
The only thing i can do is lock and unlock the bootloader.

vincenzo697 said:
i downloaded version 2 and again it cannot send the boot.img
i tried to flash stock firmware and on the sending 'motoboot' it says FAILED data transfer failure (too many links)
Click to expand...
Click to collapse
It sounds like you didn't unlock your bootloader yet. That or your fastboot drivers are not installed. Run the driver test in the tool

The only thing i can do is lock and unlock my bootloader. Its weird because i follow all your steps

vincenzo697 said:
The only thing i can do is lock and unlock my bootloader. Its weird because i follow all your steps
Click to expand...
Click to collapse
I have a idea to clean up any problems you might be having. In my tool folder there is a program called rsdlite install it and then connect the device in bootloader / fastboot mode. Then it will show up in rsd lite. next select the XML file in the folder and flash the watch to factory. See if this fixes the problems

Tomsgt said:
I have a idea to clean up any problems you might be having. In my tool folder there is a program called rsdlite install it and then connect the device in bootloader / fastboot mode. Then it will show up in rsd lite. next select the XML file in the folder and flash the watch to factory. See if this fixes the problems
Click to expand...
Click to collapse
Thanks my friend. When I will go home I will try it and report back.

vincenzo697 said:
Thanks my friend. When I will go home I will try it and report back.
Click to expand...
Click to collapse
Good luck hopefully you have used rsd lite before.

Tomsgt said:
Good luck hopefully you have used rsd lite before.
Click to expand...
Click to collapse
I tried it but again it doesnt pass the first step. If you come with another idea please tell me.

Unfortunately, My comp doesnt reconize the watch. It just comes up with unreconized device. I have tried 2 diff cables, 3 diff comps, uninstalled, reinstalled drivers multiple times. ANY ideas what could be the issue??

suzook said:
Unfortunately, My comp doesnt reconize the watch. It just comes up with unreconized device. I have tried 2 diff cables, 3 diff comps, uninstalled, reinstalled drivers multiple times. ANY ideas what could be the issue??
Click to expand...
Click to collapse
manually install the motorola adb and fastboot drivers in device manager on the computer. the computer will say that they arent compatible but they will work.

Tomsgt said:
manually install the motorola adb and fastboot drivers in device manager on the computer. the computer will say that they arent compatible but they will work.
Click to expand...
Click to collapse
Well, where are the drivers????? I have the packages in the download, but there are no seperate drives. Thanks for the reply

suzook said:
Well, where are the drivers????? I have the packages in the download, but there are no seperate drives. Thanks for the reply
Click to expand...
Click to collapse
in device manager you will see update devices click it then click manually install. next look at both compatible and uncompatible drivers until you find the motorola drivers. then pick one if it works good and if not then try a different one.
Some times i have to install them manually like this. also make sure usb debugging is turned on on the moto 360 watch. the computer will not see it without this step.

Tomsgt said:
in device manager you will see update devices click it then click manually install. next look at both compatible and uncompatible drivers until you find the motorola drivers. then pick one if it works good and if not then try a different one.
Some times i have to install them manually like this. also make sure usb debugging is turned on on the moto 360 watch. the computer will not see it without this step.
Click to expand...
Click to collapse
Thanks, i have tried all that...im just about out of options.

suzook said:
Thanks, i have tried all that...im just about out of options.
Click to expand...
Click to collapse
Are you sure you are connecting the cable to the correct 4 pins on the watch? This can be confusing because if you flip it over to connect the cable the connections flip also.

Tomsgt said:
Are you sure you are connecting the cable to the correct 4 pins on the watch? This can be confusing because if you flip it over to connect the cable the connections flip also.
Click to expand...
Click to collapse
Yup, double checked wiring, pin, 3 diff comps, everything. Guess I wont have root if I can never get the proper drivers installed. Bummer, thanks for your time.

Hello
Download link is dead
upload new link pls

scumpicule said:
Hello
Download link is dead
upload new link pls
Click to expand...
Click to collapse
download link works fine try again

No more USB after Root??
I was able to unlock the BL and Root my Moto 360 with your tool, thank you very much for the "easy way"!! My concern is that now I cannot reconnect via USB. I have even made 2 more connectors and nothing, not even the USB connection sound. Is this a normal side effect? or did I screw it up? I'm leaning on user error because I was pulling the connector off the watch before unplugging it from the computer and it zapped, shut down the PC and rebooted the watch. Watch seems to be fine, no noticeable issues after it rebooted. So I dunno...

burkebacar said:
I was able to unlock the BL and Root my Moto 360 with your tool, thank you very much for the "easy way"!! My concern is that now I cannot reconnect via USB. I have even made 2 more connectors and nothing, not even the USB connection sound. Is this a normal side effect? or did I screw it up? I'm leaning on user error because I was pulling the connector off the watch before unplugging it from the computer and it zapped, shut down the PC and rebooted the watch. Watch seems to be fine, no noticeable issues after it rebooted. So I dunno...
Click to expand...
Click to collapse
you probably need to uninstall the device in device manager then let the drivers install again

Tomsgt said:
you probably need to uninstall the device in device manager then let the drivers install again
Click to expand...
Click to collapse
I'll give that a shot! Thanks
I'll report back with how it goes.

Can't use LG Flash tool

I tried to flash latest 10L firmware, but I always get the messages Problem with communication between cell phone and PC. I did everything as instructed, selected Normal flash, but it won't work. I installed needed drivers, but when I reboot to Downloading mode, there is Exclamation sign in device manager. What could be the problem?

Did you change the port to com41?
Also are you using windows 8? If you are you need to disable signature verification.

I don't know how to change port to com41. I am using Windows 7.

TwinHeadedEagle said:
I don't know how to change port to com41. I am using Windows 7.
Click to expand...
Click to collapse
It's in the guide that you said you followed. Open your device manager in windows and right click on the lg device that shows up. Next hut advanced and change the port to com41 and then click ok.

I did that, and it still shows the same message.

Bump
Sent from my LG G3 using Tapatalk

TwinHeadedEagle said:
I tried to flash latest 10L firmware, but I always get the messages Problem with communication between cell phone and PC. I did everything as instructed, selected Normal flash, but it won't work. I installed needed drivers, but when I reboot to Downloading mode, there is Exclamation sign in device manager. What could be the problem?
Click to expand...
Click to collapse
Hi did you fix it?
I encountered the same problem. Thanks.

I didn't fix it, problem is still there.
Sent from my LG G3 using Tapatalk

Please state the exact link to the guide you're using, your phone model number and windows version.

Thanks for responding.
I tried to follow several guides, but none of them works.
I think I tried this one first --> http://forum.xda-developers.com/showthread.php?t=2785089
LG G3 International 32gb D855
v10i currently installed
Phone rooted with Bump TWRP

Bump.

Did you install the latest LG drivers for your phone? I don't know why this didn't occur to me earlier but that plays a big part in the PC seeing your phone.

Yes, I have driver. PC Suite works, everything works, but Flash tool doesn't.
Sent from my LG G3 using Tapatalk

Could this be connected with bump twrp. Maybe it is blocking this somehow.
Sent from my LG G3 using Tapatalk

Problem solved, I was using different PC and it worked

TwinHeadedEagle said:
Thanks for responding.
I tried to follow several guides, but none of them works.
I think I tried this one first --> http://forum.xda-developers.com/showthread.php?t=2785089
LG G3 International 32gb D855
v10i currently installed
Phone rooted with Bump TWRP
Click to expand...
Click to collapse
You've got to boot into download mode and then use the LG FLash Tool 2014. There's one error stating there is an error with a connection, just ignore it and watch your phone screen! If it tells you stuff like the current version and the version it is about to install, just let it sit and wait till it reboots automatically.
The reason I am saying is because you say "Problem with communication between cell phone and PC" and it looks like the error that is supposed to show up.
Could you please re-do the process, maybe re-install the LG drivers and use LG FLash Tool again. If you encounter any error either make a screenshot or type the EXACT error message in here.
Good luck

I solved the problem.
Sent from my LG G3 using Tapatalk

For all who is experiencing the same thing problem is in 64bit OS but it is not a rule. People reported that they were succesfully flashed their devices on win7 x64. If you want to be sure use x86 windows and it should be working.

[Q] Help please.

So about a week ago I rooted my zenfone 2. Ive NEVER rooted a device before so I though it would be cool.
A few days after I had rooted my phone it requested to update. I updated my device and since then it has been stuck on the bootloader. I've tried doing factory resets and everything I could think of. I have looked up guides on how to flash it but none seem to help. I tried doing the adb or w/e it is but for some reason my computer doesn't read my device anymore so when i go to look up device via adb device non can be found. Any help would be grateful. I am new to this and its a really bad experience so far. Mostly my fault. Anyways any help would be great. Thanks in advance. Asus zenfone 2 ze551ml
Note i have downloaded the usb drivers from asus. which are zip files. Not exactly sure how to install, and my phone doesnt get picked up by my computer. (ive tried using different usb ports.)

itzMon said:
So about a week ago I rooted my zenfone 2. Ive NEVER rooted a device before so I though it would be cool.
A few days after I had rooted my phone it requested to update. I updated my device and since then it has been stuck on the bootloader. I've tried doing factory resets and everything I could think of. I have looked up guides on how to flash it but none seem to help. I tried doing the adb or w/e it is but for some reason my computer doesn't read my device anymore so when i go to look up device via adb device non can be found. Any help would be grateful. I am new to this and its a really bad experience so far. Mostly my fault. Anyways any help would be great. Thanks in advance. Asus zenfone 2 ze551ml
Note i have downloaded the usb drivers from asus. which are zip files. Not exactly sure how to install, and my phone doesnt get picked up by my computer. (ive tried using different usb ports.)
Click to expand...
Click to collapse
Here are drivers for zenfone 2 and it is executable file https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Here is the guide on how to install the above drivers https://software.intel.com/en-us/android/articles/installation-instructions-for-intel-android-usb-driver
And ur device got stuck in a boot-loop because u didn't un-root ur device before applying OTA... It is clearly mentioned in almost every thread to un-root first and then apply OTA...Plus you havent installed drivers on ur pc and thats why adb is not recognizing ur phone...
Please see this guide http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596... See Flashing Asus Zenfone 2 (#4) part in this thread.... Please read the guide carefully you will find everything in it...And install drivers first...

mhp1995 said:
Here are drivers for zenfone 2 and it is executable file https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Here is the guide on how to install the above drivers https://software.intel.com/en-us/android/articles/installation-instructions-for-intel-android-usb-driver
And ur device got stuck in a boot-loop because u didn't un-root ur device before applying OTA... It is clearly mentioned in almost every thread to un-root first and then apply OTA...Plus you havent installed drivers on ur pc and thats why adb is not recognizing ur phone...
Please see this guide http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596... See Flashing Asus Zenfone 2 (#4) part in this thread.... Please read the guide carefully you will find everything in it...And install drivers first...
Click to expand...
Click to collapse
Thanks a lot for reply! I did everything it said and worked. Thank you so much! the intel driver you linked me finally got my computer to read my phone. That was probably my main problem.

Help me root this thing PLEASE

So here's the thing: I've just gotten hands on my G4, and I've been sitting here for 6 HOURS straight trying to root it, so I could install TWRP and then install CM13. But it's being F***** IMPOSSIBLE, I've tried loads of guides and tools and all I've got so far was a soft brick (which I managed to fix after a hard reset) and a big headache. Also, is there anyway I could root it on Android 6.0? Because when I tried to root it earlier I had to download this 1.4GB file that would literally take 10 hours to download. NOPE. Either I root it on Android 6.0 or anyone links me someplace else to download it, or it's not gonna happen. So anyway, any good sould would PLEASE explain me step by step how to do this? I used to mod phones a lot back in 2014 but it's been a while since I did it. My G4 is the H815.

TheBloodEagle27 said:
So here's the thing: I've just gotten hands on my G4, and I've been sitting here for 6 HOURS straight trying to root it, so I could install TWRP and then install CM13. But it's being F***** IMPOSSIBLE, I've tried loads of guides and tools and all I've got so far was a soft brick (which I managed to fix after a hard reset) and a big headache. Also, is there anyway I could root it on Android 6.0? Because when I tried to root it earlier I had to download this 1.4GB file that would literally take 10 hours to download. NOPE. Either I root it on Android 6.0 or anyone links me someplace else to download it, or it's not gonna happen. So anyway, any good sould would PLEASE explain me step by step how to do this? I used to mod phones a lot back in 2014 but it's been a while since I did it. My G4 is the H815.
Click to expand...
Click to collapse
There is an excellent guide right here on the forums:
http://forum.xda-developers.com/g4/general/howto-complete-guide-to-unlock-twrp-t3370003

Vseprz said:
There is an excellent guide right here on the forums:
http://forum.xda-developers.com/g4/general/howto-complete-guide-to-unlock-twrp-t3370003
Click to expand...
Click to collapse
>fastboot oem device-id
> waiting for any device
And it just stays like that...

TheBloodEagle27 said:
>fastboot oem device-id
> waiting for any device
And it just stays like that...
Click to expand...
Click to collapse
Are you using the stock cable and a usb 2.0 port? Did you install the drivers linked to in the guide?

Vseprz said:
Are you using the stock cable and a usb 2.0 port? Did you install the drivers linked to in the guide?
Click to expand...
Click to collapse
1. Yes
2. Not sure, I think all my USB ports are 3.0
3. Yes, installed the 15 sec adb drivers
Also, running win 10 x64
Edit: Yep, no 3.0 ports on my pc: http://imgur.com/shDGoFb

TheBloodEagle27 said:
1. Yes
2. Not sure, I think all my USB ports are 3.0
3. Yes, installed the 15 sec adb drivers
Also, running win 10 x64
Click to expand...
Click to collapse
Look at the port. If it is blue it is a 3.0. Try to find one that is not.

Vseprz said:
Look at the port. If it is blue it is a 3.0. Try to find one that is not.
Click to expand...
Click to collapse
Still nothing, tried all my usb ports

I FIGURED IT OUT: I needed to disable windows 10 driver signature, I did this by clicking on the windows icon, holding shift and pressing restart. Then going into troubleshoot, startup and pressing the 7 key, BOOM, got the fastboot oem device-id command working. Now when I try to unlock the bootloader it says that the LGH815P is not supported? NO WAY

Help fix my only phone, please!

First, I wanna say sorry for if this is in the wrong spot, first time poster here.
Ok I have a S7 and I wanted to try to install lineage OS on it. I think I messed up because it will not get off the lineage os boot screen. So then I tried to restore a backup I created with TWRP using TWRP and that failed, so now the phone is stuck on the Galaxy S7 powered by android screen and I kew I have to use odin to flash firm. I got my official firm, but no matter how many times I install samsung usb drivers or samsung kies, Odin does not detect my phone... I tried installing the drivers with the phone in, then without, then without again and restarted the PC, nothing. Then I installed Kies with the phone not plugged in, restarted, Odin still cant detect phone. Its my only phone, please help. If I go to google about this I just get told to download drivers which I clearly stated I have. I even tried 3 different USB cords, yet I know the one I am using should work because I transferred data to and from the phone before!!!!
Thanks so much if I can get help... my only phone (((
Using Windows 10:
Edition Windows 10 Pro
Version 21H2
Installed on ‎8/‎3/‎2022
OS build 19044.1889
Experience Windows Feature Experience Pack 120.2212.4180.0

IWantMyPhoneWorkingAgain said:
First, I wanna say sorry for if this is in the wrong spot, first time poster here.
Ok I have a S7 and I wanted to try to install lineage OS on it. I think I messed up because it will not get off the lineage os boot screen. So then I tried to restore a backup I created with TWRP using TWRP and that failed, so now the phone is stuck on the Galaxy S7 powered by android screen and I kew I have to use odin to flash firm. I got my official firm, but no matter how many times I install samsung usb drivers or samsung kies, Odin does not detect my phone... I tried installing the drivers with the phone in, then without, then without again and restarted the PC, nothing. Then I installed Kies with the phone not plugged in, restarted, Odin still cant detect phone. Its my only phone, please help. If I go to google about this I just get told to download drivers which I clearly stated I have. I even tried 3 different USB cords, yet I know the one I am using should work because I transferred data to and from the phone before!!!!
Thanks so much if I can get help... my only phone (((
Using Windows 10:
Edition Windows 10 Pro
Version 21H2
Installed on ‎8/‎3/‎2022
OS build 19044.1889
Experience Windows Feature Experience Pack 120.2212.4180.0
Click to expand...
Click to collapse
Instead of Kies, install Samsung Smart Switch on your PC which will install the latest Samsung drivers:
Smart Switch | Apps & Services | Samsung Canada
Simple data transfers. Secure backups. Smart Switch is the app that moves content to your new Samsung Galaxy from your old device, whether it's an Android device or not.
www.samsung.com
Then you need to restart in download mode (Odin mode) in order to flash the ROM.

THAT WORKED!!! YOU ARE A LIFE SAVER!!! The phone is now detected by odin, and currently fleshing official firmware!!! Thank you so much!!! I even went to samsungs drivers download site and that didn't work. I forgot about Smart Switch. Thank you again, I honestly appreciate you!

I got into the welcome screen or whatever it is called. Again, thank you

IWantMyPhoneWorkingAgain said:
I got into the welcome screen or whatever it is called. Again, thank you
Click to expand...
Click to collapse
did you lost your data after or no after ?
i need to know before doing the same

ikre0 said:
did you lost your data after or no after ?
i need to know before doing the same
Click to expand...
Click to collapse
Yes in this process data wipe is reqiuered because of downgrading and going back to Samsung official software.

master373 said:
Yes in this process data wipe is reqiuered because of downgrading and going back to Samsung official software.
Click to expand...
Click to collapse
even while using home csc ?

ikre0 said:
even while using home csc ?
Click to expand...
Click to collapse
Yes because of the downgrade it will not boot