Related
Dear All,
After I did repartition sd-card with rom manager i can't boot my phone. I mean i can't even get to download or recovery mode. I think it also repartition internal sd too. Right now when I plug in to charge or usb even the red light does not turn on but windows 7 does recognize it as QHSUSB_DLOAD, if can find a driver I think I can flash it with odin but after several hours of searching I could not find any driver suitable for it. Can anybody help me with this?
Yep, odin is probably the right program to use
Here's another thread with the same story.
I know but as I don't have that weird driver Odin does not recognize phone. So I need the drivers called qhsusb_dload...
Actually I would only use Odin with Samsung...
I hope somebody can find solution to this problem, that we flash entire phone without recovery mode... if somebody has the driver please post it...
Ya, I have the same issue.
I wasn`t able to find the driver for my device too. Sad Panda!
...seems like there`s no solution right now. I ll give it to HTC this evening if noone could give THE advice to repair it on my own.
Does anyone know why the desire is crashing when trying to use ROM Manager to partition the sd-card?
Well, I think I will give it to HTC a few hours later today seems to me there is nothing we can do about it.
All the drivers that are needed are installed with HTC Sync. Odin won't find your DHD because it's meant for Samsung phones (and even they have to be turned on in download mode). As your phones won't boot to either recovery or bootloader there's not much you can do.
You are right, I already sent it to HTC. I hope they don't recognize that it's rooted. But as it has already repartitioned the sd-inside, I don't think they will try to recover any data and try to understand it.
xsdenied said:
You are right, I already sent it to HTC. I hope they don't recognize that it's rooted. But as it has already repartitioned the sd-inside, I don't think they will try to recover any data and try to understand it.
Click to expand...
Click to collapse
so what happened? did they replace it for you?????
was there ever a solution to this? did anyone have luck with htc?
Yes they give me new one 3 days later, so everything went ok.
duarab said:
was there ever a solution to this? did anyone have luck with htc?
Click to expand...
Click to collapse
yes there is a solution: go to your carrier and tell them my phone is NOT WORKING. they will keep you waiting for 2 weeks, then will give you a new phone. i did this and got my phone a new
I don't know if this helps anyone...... I found the drivers for "QHSUSB_DLOAD" but I haven't been able to do much else. If anyone else finds a way to recover the device please post.
Koush confirmed that this was an issue with older versions of ROM Manager and has since been fixed. However, this happened toe yesterday using the latest recovery and the latest ROM Manager. He hasn't responded to me as of this post. A new phone is on its way from tmobile.
vcglmcg143 said:
I don't know if this helps anyone...... I found the drivers for "QHSUSB_DLOAD" but I haven't been able to do much else. If anyone else finds a way to recover the device please post.
Click to expand...
Click to collapse
is this work for Motorola Arix...
thanks for advance ....
aaurnab said:
is this work for Motorola Arix...
thanks for advance ....
Click to expand...
Click to collapse
The device is bricked. The drivers don't help. The only fix it to send it back and get a new one.
Update: I can now repair the Desire HD with advanced JTAG recovery. If you need help with a bricked Desire HD, please PM me...
Riff Box Jtaging recovery im guessing.
Now i Dont have riff box, but I have x64 drivers installed and working for the qualcomm port, and QPST sees the phone properly. The only thing im missing are the files to flash.
Edit:
If anyone is needing them; Attached are the x64 drivers for "qhsusb dload"
You can't flash the phone when it's in CPU mode. The only devices that can really do that are the NVFlash units that are the Tegra 2 chipsets. From what I know, JTAG is required. And yes I use the RIFF box and advanced micro-soldering to recovery these particular models. The Desire HD is a very difficult phone to take apart and requires skill in small electronics to not damage components. Despite the build quality, HTC makes phones that are very difficult to dis-assemble.
EDIT: Alright I solved it. I had to install Gordon's Gate. Those were the correct drivers, the ones I had were not. You can get the drivers from Flash Tool, in the drivers folder.
Alright guys of xda, I've spent the last six hours trying to fix this myself but I just can not do it with my knowledge of the Xperia Play. I wanted to ask this in the dev section but you know I can't post there until I post ten times in here. Instead of spamming the forums I'll just ask here.
Starting off, I have an R800i model bought off Ebay brand new. I love the phone, though it has no warranty so if I can't fix this I'm out $410. It was 2.3.3 prior to this mess.
I used this guide to unlock the bootloader. Yes it is confirmed to be unlocked as I tried it again and it said that it was already unlocked. I proceeded to follow step 2 and flashed the play_modded.img to my Xperia Play. After that I unplugged the USB and tried turning the phone on. To my expectations, I was stuck in a bootloop.
I looked around and tried flashing stock ROMS via Flash Tool 3.0 and 2.9.1 Beta. Both said I must go and turn on Debugging through the Android System. The system I don't have on the phone.
I tried to flash stock ROMS with fastboot, though they are ftf files, which I am not familiar with. The prompt said that the files were too big.
Another method I tried was the clockwork recovery mod that is booted from fastboot. I tried recovering a stock NANDROID backup that Logseman posted right here but it freezes at the Sony Ericsson splash screen.
I have downloaded at least two gigs trying to fix this in the last six hours to no avail. So I don't know what to do. I'm sorry for posting this in the wrong section, I just don't have an option and this is my last day off this week. I need to fix it today. I'll be on the forums refreshing this thread for the next twelve hours or until I get the fixed. So I will be here and responding instantly.
Actually, you've posted this in the right section
1) Download Flashtool 0.2.9.1 (you have done it already, I guess). 0.3.0.0 DOESN'T WORK with Xperia Play.
2) Download the 4.0.A.368 FTF file and put it in the "firmwares" folder of the Flashtool folder (if you haven't done so already).
3) Switch off the phone.
4) Fire up Flashtool. Click on "Flash" and choose the 4.0.A386 ROM
5) Obey the on-screen instructions about connecting your phone.
Once it's finished, you don't have to do anything more save booting your phone and using it. Ignore those "switch on USB debugging and Unknown sources".
I tried that and this is what I get.
Then.try.again. There is only one way to use Flashtool, and it's the one I've described.
Logseman said:
Then.try.again. There is only one way to use Flashtool, and it's the one I've described.
Click to expand...
Click to collapse
I've never got any errors with flashtool, although some people don't seem to be able to use it
Trying again and again and again would never have worked. Brute force never does. I looked through the forums outside of the Xperia Play and I found a thread explaining how it was the drivers. I installed Gordon's Gate and it worked flawlessly the first time I tried, just as you described it.
It's not.about.brute force. It's about preparing the computer properly...
Logseman said:
It's not.about.brute force. It's about preparing the computer properly...
Click to expand...
Click to collapse
Well trying again and again isn't preparing the computer properly is it?
Either way your method did work and I greatly appreciate it. Thank you for the help.
Hey guys i've been looking through alot of google and can't seem to come up with anything so i turn to you awesome people.
My friend got a Galaxy Nexus GSM and he bought it with a boot loop problem. The phone is rooted and bootloader unlocked. I know because i can go to CWM recovery and also theres the unlock sign on it. However I can't get my computer to recognize it what so ever not even mount the storage. I figure i need to get the drivers to install but i need it to be recognized in device manager to do it through a rootkit. I tried to install the ADB drivers but also got no luck. I then tried to get to ODIN for it to work but ODIN won't recognize it either. Is there any way to install the drivers so i can put on a ROM on this. I think the person he bought it from formatted everything and messed it up. Is there anyway i can install the drivers without getting it to recognize first? I tried it in windows 7 and in windows 8. ANY HELP IS GREATLY APPRECIATED!!!
dnpmoney45 said:
Hey guys i've been looking through alot of google and can't seem to come up with anything so i turn to you awesome people.
My friend got a Galaxy Nexus GSM and he bought it with a boot loop problem. The phone is rooted and bootloader unlocked. I know because i can go to CWM recovery and also theres the unlock sign on it. However I can't get my computer to recognize it what so ever not even mount the storage. I figure i need to get the drivers to install but i need it to be recognized in device manager to do it through a rootkit. I tried to install the ADB drivers but also got no luck. I then tried to get to ODIN for it to work but ODIN won't recognize it either. Is there any way to install the drivers so i can put on a ROM on this. I think the person he bought it from formatted everything and messed it up. Is there anyway i can install the drivers without getting it to recognize first? I tried it in windows 7 and in windows 8. ANY HELP IS GREATLY APPRECIATED!!!
Click to expand...
Click to collapse
read the stickies
http://forum.xda-developers.com/showthread.php?t=1626895
Pay attention to Section A. Forget Odin, no need to be using that.
First off thanks so much for the reply and help it is very aprreciated!
Secondly i did come across this sticky however like i stated the phone is in a boot loop which means i cant get past the google logo in order to set it in developer mode and set usb-debugging neither can my computer recognize the phone when i plug it in, using the original cable i've tried every port there is on my desktop and laptop and nothing comes up in device manager. The phone is completely wiped and no OS is on it. Is there any way i can get a ROM on the phone?! This is one idea i have but i don't know if it'll work, I was thinking of buying a another working nexus install the drivers with that one and then i can get the bootloop one to get recognized? and return the new one. Will that work?
dnpmoney45 said:
First off thanks so much for the reply and help it is very aprreciated!
Secondly i did come across this sticky however like i stated the phone is in a boot loop which means i cant get past the google logo in order to set it in developer mode and set usb-debugging neither can my computer recognize the phone when i plug it in, using the original cable i've tried every port there is on my desktop and laptop and nothing comes up in device manager. The phone is completely wiped and no OS is on it. Is there any way i can get a ROM on the phone?! This is one idea i have but i don't know if it'll work, I was thinking of buying a another working nexus install the drivers with that one and then i can get the bootloop one to get recognized? and return the new one. Will that work?
Click to expand...
Click to collapse
You need to get adb to work with your device, which you can do in a custom recovery. You don't need to have USB debugging enabled, you would if you were booting into the OS, but not the recovery.
You can get drivers setup while in recovery or fastboot just as easy as if you were booted into the OS, so no you don't need another device.
cupfulloflol said:
You need to get adb to work with your device, which you can do in a custom recovery. You don't need to have USB debugging enabled, you would if you were booting into the OS, but not the recovery.
You can get drivers setup while in recovery or fastboot just as easy as if you were booted into the OS, so no you don't need another device.
Click to expand...
Click to collapse
thanks thats great news cause i dont have that kind of cash but how do i get ADB to work with the phone every installation guide i've looked at requires that i have the phone recognized om device manager. Is there anyway to install adb without having the device to recognize?
dnpmoney45 said:
thanks thats great news cause i dont have that kind of cash but how do i get ADB to work with the phone every installation guide i've looked at requires that i have the phone recognized om device manager. Is there anyway to install adb without having the device to recognize?
Click to expand...
Click to collapse
again, read the thread i gave you. if you're still asking this question, read it again.
Isn't that for the nexus 4? And I did pay attention to section A but it told me how to install the drivers which is the same way as every other tutorial I've looked at. My device doesn't show up on my computer and I can't install their way. As for the fastboot driver installation idk what their talking about. I followed the instructions though and got no results. I didn't do the whole thing cause for part C I need the original rom for galaxy nexus and also I don't know if the platform tools zip is for my device so I haven't gone through with it just yet. I'm sorry it's not my phone so I don't want to mess it up even further. I've read about the part with it being in recovery mode with the volume up + power option but I'm at work and haven't tried that yet but I doubt that will work since the phone is clean. Can u please be a little more specific there's 99 pages that I have to go through for that sticky. If u can't it's ok I'll just have to go through it next week. Once again thanks for pointing me in the right direction and giving me some hope.
Sent from my Nexus 4 using xda premium
WTF, how in the hell did that thread get here, sorry man
This is the right one
http://forum.xda-developers.com/showthread.php?t=1626895
a maguro wrote this.
Oh ok thanks this makes a lot more sense. Sorry for not telling u that earlier lol.
seriously thanks ill try it tonight.
Sent from my Nexus 4 using xda premium
ok so i tried the link but im always stuck with part A. When i go into fastboot and then try the command "fastboot devices" it hangs on waiting for the device. I can't see the device anywhere on my computer to install the fastboot drivers as instructed by 1wayjonny in this post http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1
Am i missing something here? i did everything in the other steps such as downloading all the files into the same directory and everything. Im using windows 7 and i updated all my drivers for usb and even tried different usb cables including the original and usb2.0 and 3,0 ports but still no dice. I also tried it on windows 8 and got the nada.
dnpmoney45 said:
I can't see the device anywhere on my computer to install the fastboot drivers as instructed by 1wayjonny in this post http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1
Click to expand...
Click to collapse
You reboot the device into bootloader/fastboot mode, then you connect the USB, and there's no sign at all that a USB device has been installed?
Remove all drivers, reboot, and start over. Get a tool for Windows that allows you to really dig on all of the installed drivers and remove all Nexus devices drivers permanently. Rant: Umm, Windows sucks bad. Thanks Linus!
bk201doesntexist said:
You reboot the device into bootloader/fastboot mode, then you connect the USB, and there's no sign at all that a USB device has been installed?
Remove all drivers, reboot, and start over. Get a tool for Windows that allows you to really dig on all of the installed drivers and remove all Nexus devices drivers permanently. Rant: Umm, Windows sucks bad. Thanks Linus!
Click to expand...
Click to collapse
I've done it both ways just to ensure it wasn't something that simple. I uninstalled all drivers i can possibly find theres non no where i used CC to look for more and device deview and even unistalled the java se and eclipse and android SDK and all the packages and installed them again and still nothing. My nexus 4 however recognizes both in adb and fastboot ......
Anything at all? Anyone?
Sent from my Nexus 4 using xda premium
dnpmoney45 said:
Anything at all? Anyone?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Well, maybe you could try omapflash. If you can't get several PCs to see the device, then something's wrong with the USB port?
Not even on Linux?
a manta wrote this.
bk201doesntexist said:
Well, maybe you could try omapflash. If you can't get several PCs to see the device, then something's wrong with the USB port?
Not even on Linux?
a manta wrote this.
Click to expand...
Click to collapse
I did a little looking up about omapflash and from what i can see so far there needs to be drivers installed first. I may be wrong but i have to do some more research on it and i dont have a linux pc my laptop is down thanks to a power pin connector pin being pulled out. and i dont know if the device port is good or bad i can get a charge but that doesnt mean its fine. What if i get another device and install drivers via that and then try to get it to recognize? would that work?
dnpmoney45 said:
What if i get another device and install drivers via that and then try to get it to recognize? would that work?
Click to expand...
Click to collapse
To really make sure that the issue isn't on the host side but rather the USB port on the device? Yeah, that would rule it out.
Also, I just remembered: you're not using the USB ports of your PC case are you? Make sure you're using the motherboards' own USB ports.
a maguro wrote this.
bk201doesntexist said:
To really make sure that the issue isn't on the host side but rather the USB port on the device? Yeah, that would rule it out.
Also, I just remembered: you're not using the USB ports of your PC case are you? Make sure you're using the motherboards' own USB ports.
a maguro wrote this.
Click to expand...
Click to collapse
Thats all it would do?! What about making me able to install the drivers and get the phone to be recognized? No wont work im dreaming?
And no im not using case ports at all i use them for charging and thats all i know at least that those arent reliable.
Windows 8 64-bit...drivers install...stuck
even I am stuck on the same roadblock. have my GNex stuck on the google logo. can access recovery mode though (TWRP 2.5.0.0). Now i just upgraded my PC to Windows 8 64-bit and cant seem to be able to install drivers.
the problem is that almost all the methods require:
1. GNex to be connected with USB Debugging ON
2. install ADB Drivers
3. get into Fastboot or Recovery
4. install Bootloader Drivers
since i cant get past the Google logo on my GNex...i cant perform Steps 1 & 2.
and if i directly try to install the bootloader drivers the OS returns an error (yellow exclamation next to the installed driver)
Added pictures to help explain better.
Thnx in advance.
rej_ares said:
even I am stuck on the same roadblock. have my GNex stuck on the google logo. can access recovery mode though (TWRP 2.5.0.0). Now i just upgraded my PC to Windows 8 64-bit and cant seem to be able to install drivers.
the problem is that almost all the methods require:
1. GNex to be connected with USB Debugging ON
2. install ADB Drivers
3. get into Fastboot or Recovery
4. install Bootloader Drivers
since i cant get past the Google logo on my GNex...i cant perform Steps 1 & 2.
and if i directly try to install the bootloader drivers the OS returns an error (yellow exclamation next to the installed driver)
Added pictures to help explain better.
Thnx in advance.
Click to expand...
Click to collapse
SOLVED (Dont know how but it worked):
1. Factory reset (TWRP)
2. Installed an old ROM which was already on the GNex
3. Restart...it gets stuck at the Google logo...remove battery
4. TWRP - Factory reset
5. reboot...
Hello there. I updated my Zenfone 2 ZE551ML to Android 6 as soon as it came out (download it manually from the official website) and now i am trying to do downgrade without sucess. I tried a bunch of things alredy but none of them works. All that need the ADB/Fastboot i get stuck in "waiting device". I installed the drivers, i rebooted my PC, my phone and soo on. The only thing i didnt tried yet is sideloading the Android 5 room.
I have a Win 10 and i am from Brazil (yes, the one place that the Android 6 updated made almost all the sensors stop working), idk if that changes anything.
rafaelloest said:
Hello there. I updated my Zenfone 2 ZE551ML to Android 6 as soon as it came out (download it manually from the official website) and now i am trying to do downgrade without sucess. I tried a bunch of things alredy but none of them works. All that need the ADB/Fastboot i get stuck in "waiting device". I installed the drivers, i rebooted my PC, my phone and soo on. The only thing i didnt tried yet is sideloading the Android 5 room.
I have a Win 10 and i am from Brazil (yes, the one place that the Android 6 updated made almost all the sensors stop working), idk if that changes anything.
Click to expand...
Click to collapse
Are you using the downgrade rom from asus?
Sent from my ASUS_Z00AD using Tapatalk
No. Is there one? Do you have a link? And what i should do with it?
kenbo111 said:
Are you using the downgrade rom from asus?
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Searched for it without luck
You tried to
download it manually from the official website.
Have you checked to see if it's there ?
timbernot said:
You tried to
download it manually from the official website.
Have you checked to see if it's there ?
Click to expand...
Click to collapse
Yes. No luck there. Only the usual ones, none to downgrade
Ok I will keep an eye out for you .
You can boot into system or are you bricked ?
rafaelloest said:
Hello there. I updated my Zenfone 2 ZE551ML to Android 6 as soon as it came out (download it manually from the official website) and now i am trying to do downgrade without sucess. I tried a bunch of things alredy but none of them works. All that need the ADB/Fastboot i get stuck in "waiting device". I installed the drivers, i rebooted my PC, my phone and soo on. The only thing i didnt tried yet is sideloading the Android 5 room.
I have a Win 10 and i am from Brazil (yes, the one place that the Android 6 updated made almost all the sensors stop working), idk if that changes anything.
Click to expand...
Click to collapse
I has the same problem as you, try connect your zenfone to the usb ports on the rear panel. Switch different usb ports and check for fastboot devices if it recognize your phone. Zenfones seems to not like all the usb ports, Zen max has this problem, too
timbernot said:
Ok I will keep an eye out for you .
You can boot into system or are you bricked ?
Click to expand...
Click to collapse
I can boot into the system, its just that most of the sensors dont worke and i have no idea when asus will patch it
Found this but you have to fully understand ..all your own risk too read the whole thread from beginning
http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=101490&extra=page=1&page=3&mobile=2
Hi,
I don't know how this happenned, but I bricked my phone. When I try to start it, it says cache/data/etc missing. I tried the MEGA UNBRICK guide found here, but it did not help, phone does not show up in the tool. I can still connect it to the computer and detect it with fastboot, ADB doesn't see the phone. Please help, thanks for replies.
vector88 said:
Hi,
I don't know how this happenned, but I bricked my phone. When I try to start it, it says cache/data/etc missing. I tried the MEGA UNBRICK guide found here, but it did not help, phone does not show up in the tool. I can still connect it to the computer and detect it with fastboot, ADB doesn't see the phone. Please help, thanks for replies.
Click to expand...
Click to collapse
Can i help you with the mega unbrick Guide?
Do you have TeamViewer for a remote session?
Just PM me if you are interested
Try the second method in this thread
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
EDIT: Sorry. Didn't read your problem in full
I had the same problem flashing freedomos/oxygenos, follow mega unbrick method using the full version of the tool (method 2). you go back to 6.0.1
I tried the second method, it did not work, thats the reason I am asking here ;(
vector88 said:
I tried the second method, it did not work, thats the reason I am asking here ;(
Click to expand...
Click to collapse
Like i said pm me if you want me to guide you through there.
Is that the first screen you are getting as soon as you boot
vector88 said:
Hi,
I don't know how this happenned, but I bricked my phone. When I try to start it, it says cache/data/etc missing. I tried the MEGA UNBRICK guide found here, but it did not help, phone does not show up in the tool. I can still connect it to the computer and detect it with fastboot, ADB doesn't see the phone. Please help, thanks for replies.
Click to expand...
Click to collapse
Method 2 has a folder with things containing these files, you can flash them manually with Fastboot. If you need help feel free to pm me ive been through this aswell.
vector88 said:
I tried the second method, it did not work, thats the reason I am asking here ;(
Click to expand...
Click to collapse
You may have to try repeatedly, using method 2. I have read about it working after a few repeated attempts.
Try this https://forum.xda-developers.com/showpost.php?p=68245482&postcount=111
Thanks, on third time, the second MEGA UNBRICK method worked. But to made sure, I have uninstalled all oneplus and android drivers, then that worked.
Thank you All
vector88 said:
Thanks, on third time, the second MEGA UNBRICK method worked. But to made sure, I have uninstalled all oneplus and android drivers, then that worked.
Thank you All
Click to expand...
Click to collapse
Glad you're back
it is better to take it to a oneplus service centre. i too had the same problem they fixed it within 10 mins.