Now i know theres hundreds of threads about 3G problems and im hoping this one doesnt get over looked . I recently in stalled two custom roms on my evo ( cyanogen 7.0.0 , and miui 1.1.25 ) wiped chaches factory resets etc. on first installations but for some reason my 3G is not being recognized or even showing up when i am using the custom roms. The only way i can use 3G is when i restore my phone back to my stock rom..... can anyone help me fixing the issue ....please. if i can get my 3G up and working while im running my custom roms it will make everything so much easier, instead of having to restore my stock rom when ever i want to do anything on my phone outside a wireless network
oh and kernals etc. are stocks that came with the roms.no customization has been done to the roms themselves.
has nothing to do with the kernels
you have to get msl reader and set your 3g up i think there is a thread in the developer section on it...let me see if i can find it
OK HERE IS THE FIX,
PHONE MUST BE ROOTED
PHONE MUST HAVE SENSE ROM ON IT TO FIX THE PROBLEM
download msl reader from market,
open msl reader,
write down msl code
open dialer
dial ##3282#
when asked for code or password enter the msl code you wrote down
select edit mode
select EVDO
select preferred mode,
set to automatic.
save exit reboot,
load rom of choice
and VIOLA YOU HAVE 3G
CHEERS AND GOOD LUCK
Well for CM7, are you sure you data is enabled? Sometimes tis off when you boot the rom. You can check in mobile data under wifi settings.
while that is true roxxors, since the OP stated two different roms giving him trouble and not having trouble with original load, the problem lies in how the roms read 3g...we all know that sprint roms LIE about 3g...and cyanogen actually reads actual signal...however until that EVDO change is done his phone will never get 3g on any of the cyanogen or miui or even aosp roms....
Ok, I've tried this a few times and am now frustrated.
I upgraded from CM 10 to CM 10.1. The phone appears to work correctly for an hour or two, and then I lose all cellular data connectivity on the phone. Going into the data configuration mode shows that it is configured for LTE, but is unable to even connect to GPRS. I flashed back to stock and everything works correctly. Re-install CM 10.1, same thing-- data for about an hour, then nothing. Flashed back to stock and then to a restored version of CM 10, everything works great.
I would like to move to CM 10.1, but I need data connectivity (I'm funny that way ). Anyone else have a similar experience? Any suggestions?
Thanks!
Jim
TDBearCT said:
Ok, I've tried this a few times and am now frustrated.
I upgraded from CM 10 to CM 10.1. The phone appears to work correctly for an hour or two, and then I lose all cellular data connectivity on the phone. Going into the data configuration mode shows that it is configured for LTE, but is unable to even connect to GPRS. I flashed back to stock and everything works correctly. Re-install CM 10.1, same thing-- data for about an hour, then nothing. Flashed back to stock and then to a restored version of CM 10, everything works great.
I would like to move to CM 10.1, but I need data connectivity (I'm funny that way ). Anyone else have a similar experience? Any suggestions?
Thanks!
Jim
Click to expand...
Click to collapse
ROMs have their own APN settings usually. I would delete what's in there and put it all back it manually.
Also try *#*#4636#*#* make sure that looks kosher in there.
And I just read this
SERVICE MENU
****************
*#197328640#
Code to remove Restriction: 11865
then
SERVICE MENU
****************
*#197328640#
Code to disable lte - 1187226
Code to re-enable - 118721
Sent from my SGH-I747 using xda premium
double check your imei too
I want this to be a thread dedicated to help others to flash the mentioned devices to Page Plus / Selectel / Next-G / Service in REAL 3G....
I have been flashing phones for a several years now as a hobby and want to pass on some of my knowledge and advice to others making this transition.
A few things I want to do when time allows as I work a full time job and have a family.. (Not to mention my Flashing Phone Hobby)
1. Keep a list of PRL's that work with Page Plus with no roaming symbol...
2. Maintain a summary of how to get into Diag Mode on all phones and methods to get your SPC/MSL on Sprint Phones......
3. Post useful Apks,, 16 Digit Passwords, and other instructions on flashing the phones.......
4. Maintain a Current List of Page plus Sids for Flashing..........
5. Make this a thread that people can come to and discuss issues etc....
Now I am not good at writing Guides and truthfully at this time have no desire to do so, but I will however try my best to help you along the way when my time is available. So please I ask do not flood my Inbox with request for a guide etc. (Post here so others can contribute and everyone can learn together)
One thing I have learned over the years of flashing devices is its better to think it through and work by trial and error so you can truly learn the skill of performing successful flashes.
(Please everyone keep it civil and make this a community effort to help each and everyone)
Current Status is that I can pull Keys/Passwords on Verizon S3 / S4 / S5 / Note 2 and 3, Sprint S2 / S3 /S4/S5 / Note 2 and 3, US Cellular S2 / S3 / S4/ S5 and Note 2 and 3 phones, Plus several other Phones and get REAL 3G with no donor on Page Plus / Selectel / Next-G....
(Again let me stress, please do not flood me with request to show you how to do this, as currently I will not post this information, I have my reasons and I hope you can respect that and use this thread for the other benefits you can get from it)
** Note: I did not include Verizon Prepaid or Straight Talk in this due to my beliefs that the cloning of esns/meids to obtain service is not LEGAL **
Viper
Page Plus Sid List
https://www.dropbox.com/s/o4yatnkv7g6lwm5/PagePlusSIDList.xls
16 Digit Passwords:
USCC S3 / S4 / S5 /Note 2 / Note 3 2010031619780721
USSC Note 3 (Kit Kat) 2013051320130909
Verizon S3 / S4 / S5/ Note 2 / Note 3 2009031920090615
Sprint S3 01F2030F5F678FF9 or 2012112120131219
Sprint S4 / S5 2012112120131219
Sprint Note 2 / Note 3 2012112120131219
Metro PCS S3 2FF811282FF9F323
Cricket S3: 2010031619780721
Cricket S4: 01F2030F5F678FF9
Alltel S3: 2013032720130712
Gusto (Friend) U365 2011101116083112
Gusto 3 U385 2013091220140410
Working PRL's by Original Carrier phone:
Sprint
60009 PRL Latest Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/i6659mf3vo1xbuy/60009.prl
60008 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/nnykb969xd9daz1/60008.prl
60007 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/7upnkzpi41u2kf1/60007.prl
65002 PRL Most Popular https://www.dropbox.com/s/hfw92t2r3i8icfn/65002.prl
52874 PRL https://www.dropbox.com/s/rrpkxqwhk5khtpw/52874-page-plus-sprint-phones.prl
52896 PRL https://www.dropbox.com/s/r47fa53i32c3596/52896-page-plus-sprint-phones.prl
59317 PRL https://www.dropbox.com/s/6svp8p8qcqhk5ea/59317 sprint modified.prl
65005 PRL Modded PRL https://www.dropbox.com/s/1mkxmv4mox6hzw0/65005.prl
53263 PRL Selectel Latest (Not Modded) https://www.dropbox.com/s/734mz0pj0wng0ws/53263Selectel.prl
53269 PRL Page Plus Latest (Not Modded) https://www.dropbox.com/s/fphctk79gf7k0cd/53269PPlus.prl
Verizon
60009 PRL Latest Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/i6659mf3vo1xbuy/60009.prl
60008 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/nnykb969xd9daz1/60008.prl
60007 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/7upnkzpi41u2kf1/60007.prl
65002 PRL Most Popular https://www.dropbox.com/s/hfw92t2r3i8icfn/65002.prl
53078 PRL https://www.dropbox.com/s/1nd3erjcpkym55v/53078.prl
53126 PRL https://www.dropbox.com/s/u1i4w9kqfj609fr/53126verizon.prl
53188 PRL https://www.dropbox.com/s/l9rqhbvrgqiochc/53188verizon.prl
53160 Selectel PRL https://www.dropbox.com/s/vc0i0pea8igr78d/53160.prl
65005 PRL Modded PRL https://www.dropbox.com/s/1mkxmv4mox6hzw0/65005.prl
53263 PRL Selectel Latest (Not Modded) https://www.dropbox.com/s/734mz0pj0wng0ws/53263Selectel.prl
53269 PRL Page Plus Latest (Not Modded) https://www.dropbox.com/s/b41fbuimja5dw9y/53269-page-plus-sprint-phones.prl
US Cellular
60009 PRL Latest Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/i6659mf3vo1xbuy/60009.prl
60008 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/nnykb969xd9daz1/60008.prl
60007 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/7upnkzpi41u2kf1/60007.prl
65002 PRL Most Popular https://www.dropbox.com/s/hfw92t2r3i8icfn/65002.prl
52874 PRL https://www.dropbox.com/s/rrpkxqwhk5khtpw/52874-page-plus-sprint-phones.prl
59317 PRL https://www.dropbox.com/s/6svp8p8qcqhk5ea/59317 sprint modified.prl
65005 PRL Modded PRL https://www.dropbox.com/s/1mkxmv4mox6hzw0/65005.prl
53263 PRL Selectel Latest (Not Modded) https://www.dropbox.com/s/734mz0pj0wng0ws/53263Selectel.prl
53269 PRL Page Plus Latest (Not Modded) https://www.dropbox.com/s/b41fbuimja5dw9y/53269-page-plus-sprint-phones.prl
What is a PRL and what it does:
PRL=(Preferred Roaming List)
The PRL is a list of information that resides in the memory of some kinds of digital phones. It lists the radio frequencies the phone can use in various geographic areas.
The part of the list for each area is ordered by the bands the phone should try to use first. Therefore it's a kind of priority list for which towers the phone should use.
The PRL helps determine which home-network towers to use, and also which towers belonging to other networks to use in roaming situations (areas where the home network
has no coverage.) When roaming, the PRL may instruct the phone to use the network with the best roaming rate for the carrier, rather than the one with the strongest signal at the moment.
Since a PRL tells the phone "where" to search for a signal, as carrier networks change over time, an updated PRL may be required for a phone to "see" all of the coverage that it should,
both with the home network and for roaming.
10.key if needed:
10.key https://www.dropbox.com/s/ybyi51lodiislt5/10.key
PagePlus APN:
https://www.dropbox.com/s/h81z8am5pk0tr7g/apnpageplus.zip
The Best MMS Apk by far fully Flash Compatible
Version 1.40: http://8s.ms/download/releases/8sms-1.40.apk
Read all about it: (I have tested works on all carrier phones)
http://8s.ms/
(Settings
Instructions Below:
Setup Instructions Below:
1) Launch 8sms app.
2) Press Menu button on your phone.
3) Choose Settings
4) Choose Multimedia (MMS) Messages
5) Press "MMS Settings"
6) Choose "MMSC"
6) Type in "http://mms.vtext.com/servlets/mms?X-VZW-MDN=Your Phone number including area code" do not include the double quotes. Press OK button. EXample: http://mms.vtext.com/servlets/mms?X-VZW-MDN=7792559415
7) Press "MMS PROXY".
8) Make it Blank
9) Press "MMS PORT".
10) Make it Blank
Press OK button.
Press the Phones Back Button
Choose Phone number under the extra settings and enter your 10 digit phone number then press the ok button.....
Restart the Phone.........
DONE..................
____________________________________________________________________________________________________________________
Working MMS Program:
USSC/Verizon MMS Messages (Must be on JB and up to use)
This MMS apk. will keep you from having the issue of when sending a MMS it showing up as the Phone Number on the Sim Card
https://www.dropbox.com/s/eclk63eyssz4to6/workingmms2.apk
When you install the apk and open, it will ask you the carrier you flashed the phone to, along with the phone number. It is very important that you fill this information in. If you fail to do so, the apk will not function.
Verizon Messages (Messaging Apk. for use with Flashed phones)
https://play.google.com/store/apps/details?id=com.verizon.messaging.vzmsgs
Slightly Themed Version of Verizon Messages:
https://www.dropbox.com/s/w9kmkyhpkj6ljnr/vzmThemed.apk
Voicemail Notification Apk for Flashed Phones (Does not suppose to have ads):
https://www.dropbox.com/s/32lvu0n7dlill84/voicemailnotifier.apk
DFS latest
http://cdmatool.com/downloadFiles/application/Setup DFS 14.04.16.0.zip
QPST 2.7.402
https://www.dropbox.com/s/4et0l079vnf0jir/QPST.2.7.402.msi
Hidden menu Apk:
https://www.dropbox.com/s/hefr96pykkuifj1/HiddenMenu_No_Root.apk
Samsung Drivers
http://www.samsung.com/us/support/owners/product/SCH-I545ZKAVZW#
Helpful Tips:
How to Enter Diag Mode by Carrier Phone:
Sprint SPH-L710 (Galaxy S III) and SPH-L900 (Note 2)
Open Dialer enter ##3424#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
____________________________________________________________________________________________________________________________________________________
Sprint SPH-L720 (Galaxy S4,S5)
There are two options to dial for diag menu on this phone
##3424# and *#7284#
One will ask for an SPC Code and One will Not
Use the one that does not ask for SPC Code
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
____________________________________________________________________________________________________________________________________________________
Verizon ]SPH-I535 (Galaxy S III) and SCH-I605 (Note 2) up to 4.2.2 Android Version
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial **87284
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
________________________________________________________________________________________________________________
Verizon ]SPH-I535 (Galaxy S III) and SCH-I605 (Note 2) 4.3 Android Version
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
____________________________________________________________________________________________________________________________________________________
Verizon SPH-I545/SM-G900F (Galaxy S4, S5) / Galaxy Stellar I200 4.1.2
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
____________________________________________________________________________________________________________________________________________________
USCellular SCH-R530 U (Galaxy S III) and SCH-R950 (Note 2) up to 4.1.2 Android Only
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial *#7284#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
____________________________________________________________________________________________________________________
USCellular SCH-R530 U (Galaxy S III) and SCH-R950 (Note 2) 4.3 Android Only
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
_______________________________________________________________________________________________________________________
USCellular SCH-R970 (Galaxy S4) under 4.3
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial *#0808#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
__________________________________________________________________________________________________________________________________________________
USCellular SCH-R970 (Galaxy S4, S5) 4.3
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
____________________________________________________________________________________________________________________________________________________
APK to Get SPC/MSL on Sprint Phones running 4.3 Android
https://www.dropbox.com/s/gy1729al1zn4hzg/SPCUtility .apk
_______________________________________________________________________________________________________________________
Utility to Get in Diag Mode.......
https://www.dropbox.com/s/555mcjdpcp3vem3/PhoneUtilss.apk
_______________________________________________________________________________________________________________________
How to Bypass Verizon S3 Activation Screen without Sim Card
While in Portrait Mode of the Languge Screen
- Tap below the last language, Left side - Right Side
- Left Side - Right Side
- Volume up Button.
____________________________________________________________________________________________________________________________________________________
YouTube Fix for Sprint Flashed Phones:
Dial ##3282#
Enter SPC (000000)
Look through Menus and find the options to change the below, and modify them to below settings
RSTP Proxy Port
0
RSTP Proxy Address
0.0.0.0
HTTP PD Proxy Port
0
HTTP PD Proxy Address
0.0.0.0
____________________________________________________________________________________________________________________________________________________
How to Reset a Sprint Samsung Phone back to Sprint
Open Dialer and dial ##RTN# then enter your MSL/SPC Code (Most likely is 000000 if it has been flashed before
You most likely will need to also put a Sprint PRL on the phone also if you are not using the Sprint Corporate PRL
If so you can use this one and it should work fine:
https://www.dropbox.com/s/frdvl985bsdfdt9/24006.prl
_______________________________________________________________________________________________________________________
Remove No Sim Card Icon from Taskbar
Must be Rooted
Use BuildProp Editor here to edit: https://www.dropbox.com/s/srnoi9qwzggujex/com.jrummy.apps.build.prop.editor-1.apk
Ad the Below line to Build Prop at the very bottom
ro.config.donot_nosim=true
Tap Save and reboot
_______________________________________________________________________________________________________________________
Verizon S3 i535 Casual Root/Unlock/Recovery
(THIS IS ONLY COMPATIBLE WITH FIRMWARES UP TO 4.1.2 MF1 if you try on any other versions you will BRICK your device)
Easy way to Root/Unlock/Install Recovery Verizon S3 Only
http://forum.xda-developers.com/showthread.php?t=2332825
**As always use at your own Risk... This is not my work.... Give credit and thanks to the developers of the methods please**
_______________________________________________________________________________________________________________________
How to Reset a Sprint Samsung Phone back to Sprint
Open Dialer and dial ##RTN# then enter your MSL/SPC Code (Most likely is 000000 if it has been flashed before
You most likely will need to also put a Sprint PRL on the phone also if you are not using the Sprint Corporate PRL
If so you can use this one and it should work fine:
https://www.dropbox.com/s/frdvl985bsdfdt9/24006.prl
_______________________________________________________________________________________________________________________
Android 4.3 Upgrade Methods for Verizon and Sprint Phones
DO NOT DOWNLOAD THESE FILES AND ATTEMPT UNLESS YOU ARE 100% SURE YOU KNOW WHAT YOU ARE DOING
THIS WILL LOCK YOUR BOOTLOADER FOREVER NO GOING BACK TO PREVIOUS VERSIONS EVER
Let me stress that anytime you flash either with ODIN or normal methods you take the chance of BRICKING your device.
SO be sure you know what you are doing as I am not responsible for anything that may go wrong.....
These will wipe your devices and bring the phone back to like is what was brand new, and should not affect your flash, but then again do at your own risk.....
______________________________________________________________________________________________________________________
ODIN 3.07 Program to use for the Update: https://www.dropbox.com/s/zjw7zhr9br...Odin_v3.07.rar
Flashing Firmware with Odin Instructions:
1. Put your phone into download mode. To do this turn the phone off and then press volume down+home button+power button at the same time. You will then get a warning saying press up to continue and down to cancel, press volume up and you are now in download mode
2. Start Odin
3.At this point please make sure that ONLY TWO OPTIONS TICKED are "Auto Reboot" and "F.Reset Time" (otherwise you could end up with a very expensive paperweight)
4. Select the PDA button in the Odin program: Direst it to the tar file that you are using to upgrade the one you downloaded for your device......
5. Plug your Phone into the computer, wait for the drivers to install and then wait for the ID:COM section to turn blue in ODIN.
7.Press start and the flash will begin, once this has started do not remove the usb cable or turn off your computer or the device (or you will have brick for sure) the phone will reboot once the flash has finished.
8. All Done Enjoy 4.3
______________________________________________________________________________________________________________________
SPRINT S3 ONLY 4.3 Jelly Bean L710VPUCMK3
You cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
Link 1:
http://terafile.co/243485193552/L710...UCMK3_HOME.zip
Link 2:
http://ul.to/q2tqpepc
Link 3:
http://rg.to/file/d084d17f683d047600...ginal.zip.html
__________________________________________________ __________________________________________________________________
Verizon S3 ONLY 4.3 Jelly Bean I535VRUCML1
You cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
Link:
http://www.androidfilehost.com/?fid=23269279319199798
_____________________________________________________________________________________________________________________
Verizon S4 ONLY 4.3 Jelly Bean I545VZWEMK2
You cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
Link:
http://terafile.co/99d3fb3e0855/VZW_I545VRUEMK2_I545VZWEMK2.zip
______________________________________________________________________________________________________________________
SAFEROOT
Safe Method to Root Only the Device: (This will work on other versions OF Android also) Does not include Custom Recovery (ROOT ONLY)
Will not trip KNOX for warranty purposes either:
Link:
http://forum.xda-developers.com/showthread.php?t=2565758&highlight=s3
Before you try using this rooting program, you'll need to have the USB drivers installed for your phone: (Linked Below)
Drivers Download: https://www.dropbox.com/s/8n1bl5uusy... (2).exe
Step 1 - Install Drivers Above
Step 2 - Enable USB Debugging
Step 3 - Unzip the saferoot.zip
Step 4 - Root your phone
Double click on the "install.bat" to run the root. It will root and reboot your phone. Once that's done, you're rooted!
(Follow Instructions that are included in exploit)
remember you cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
______________________________________________________________________________________________________________________
Things Not To Do With A Flashed Phone
1. NO OTA Android Updates Period (You will break your flash)
2. No OTA Programming *228, *22890, *22800, *22801 or any other Variants
3. Some Rom's do not play well with Flashed Phones do your research before flashing.
4. Never do a RTN (Return to Network) Reset ##786# on a Flashed Device (Most definitely will break your flash)
5. Some Radios/Modems cause issues if you flash (If the phone is working leave it be)
6. Factory Reset ( I recommend not to do this also, some versions of Android phones it will break things period)
7. PRLS ..... aww my favorite, everyone thinks these are the answer to all their prayers
a. If the phone is working leave it be (my personal stance)
b. Some PRL's are not EVDO or have not been Modded and will break your 3G or throw the Roaming Symbol
c. I have posted many PRL's above that will work with 3G (Latest one I modded is 60007 for all carrier phones)
8. No Phone Number Change (You change your carrier assigned number, you must reflash)
_______________________________________________________________________________________________________________________
Why Is My 3G Data Slow?
It's a complaint I hear everyday from people using flashed smartphones performed by them or another flashing provider...
Why are my speeds so slow and is it possible to improve the situation?
There are a variety of reasons why 3G data speeds may be less than stellar, and each one requires a different solution.
Before assuming there's a problem, though, make sure you understand the realistic capabilities of your service.
VERIZON/Page Plus/Selectel:
2G 1xRTT: 50-100kbps download and upload with bursts to 144 kbps
3G EVDO Rev-A: (shows up as "3G" on your phone): 600-1400kbps download with bursts to 3Mbps, 200-800kbps upload with bursts to 1.8Mbps
(Don't get to caught up in running speedtest as these can be very confusing and fool you at times into thinking you have a problem when actually
the way they test and the servers they use get congested also)
POTENTIAL PROBLEM #1: Weak signal
If you're too far away from the tower (or if there are a lot of obstructions/interference between you and the tower), your device won't be able
to pick up a strong signal and your performance will suffer.
Solution: Try other locations in your home or area you are in, some areas do not get great signal strength and this could be your issue.
POTENTIAL PROBLEM #2: Tower overcrowding (Network Congestion)
The bandwidth available from a cell tower is shared amongst all the users connecting to the tower. A cell tower can only provide so much bandwidth,
and the more users there are connecting to the tower, the slower everyone's speeds will be.
Is this YOUR problem? If you notice that your speeds tend to follow a pattern most days (for example, nice and fast late at night or early in the day but slower in the evening when everyone is home from work and school) and you've confirmed that the problem isn't signal-related (by testing your speeds at home and then again somewhere closer to the tower), you'll know your tower is simply being used by lots of other subscribers at the same time.
Solution: Unfortunately, there's nothing you can do about this (other than consider switching to a different provider who might have more capacity at their towers or isn't as oversold in your area).
POTENTIAL PROBLEM #3: Incorrectly Performed Flash
It's very common for flashed phones to have been done incorrectly.
Is this YOUR problem? This is very possibly the source of the problem if your flash was done incorrectly or you made changes to your setup recently.
Solution: You'll need to either troubleshoot the phone and or reflash the problem phone.
POTENTIAL PROBLEM #4: Tower issues
Providers periodically do maintenance or upgrade work on cell towers, which can disrupt service; other factors like severe weather occasionally damage cell towers and cause problems.
Is this YOUR problem? If your service suddenly degrades significantly and doesn't improve much during non-peak hours (which it would if the problem was overcrowding), and you've confirmed it's not a problem with your flash, the problem likely lies with the tower. The best way to confirm is to take your device several miles away where you'll be connecting to a different tower and test there — if everything works fine when connected to a different tower, you'll know something is amiss with your home tower.
Solution: Out of your control, bear with it until the provider finishes work and repairs.....
Potential Problem #5: Sprint and USSC Devices
I hate to say it but I have seen some Sprint/USSC phones have this issue, likely due to weaker radios and or hardware implemented in the device.
Is this YOUR problem? This is very possibly the source of the problem if your flash was done correctly and you verify that other devices on the network in the same location as yours get consistently better data speeds.
Solution: Verify flash is correct and that your connected at EVDO in settings and passwords have passed authentication. If so this most likely a Sprint/USSC device issue out of control by the user. Replace device with another Cellphone Carrier brand and most of the time problem will be solved. (I see this allot with some of the Samsung S3 Devices from Sprint/USSC, almost like certain lots had a weak radio for whatever reason)
In the end your speeds can be related to any or all of these issues, and a proper flash is key to performing at optimal speeds.
Sometimes as much as we hate to admit a professional flasher is needed to correct speed issues, you would not believe some of the poor flashes I see when I read preflashed phones everyday that so called professionals performed
Definitely keeping an eye on this thread! Thanks Viper for putting this together. As a current PP customer with a Sprint GS3, I'm interested in learning more.
I personally used DFS / QPST and a Fascinate to get mine working w/ 3G. A couple things I'd be interested in documenting / learning:
1) Updating the PRL on my GS3 (or other flashed Sprint phone). I currently have to activate my Fascinate, *22891, downloading PRL w/ DFS, loading it onto the GS3, then reactivating the GS3
2) The proper procedure to get AOSP roms to work 100% (MMS in particular) on flashed Sprint phones. I haven't tried yet, but I believe AOSP roms (vs TW) require some extra work to get full functionality.
dirkdigles said:
Definitely keeping an eye on this thread! Thanks Viper for putting this together. As a current PP customer with a Sprint GS3, I'm interested in learning more.
I personally used DFS / QPST and a Fascinate to get mine working w/ 3G. A couple things I'd be interested in documenting / learning:
1) Updating the PRL on my GS3 (or other flashed Sprint phone). I currently have to activate my Fascinate, *22891, downloading PRL w/ DFS, loading it onto the GS3, then reactivating the GS3
2) The proper procedure to get AOSP roms to work 100% (MMS in particular) on flashed Sprint phones. I haven't tried yet, but I believe AOSP roms (vs TW) require some extra work to get full functionality.
Click to expand...
Click to collapse
Yeah good questions, I want this to be a team effort with everyone helping and learning together......
Couple of comments on your questions..
..
1) Updating the PRL on my GS3 (or other flashed Sprint phone). I currently have to activate my Fascinate, *22891, downloading PRL w/ DFS, loading it onto the GS3, then reactivating the GS3
I am not clear on why you would need to reactivate to update PRL, What PRL are you using now?
2) The proper procedure to get AOSP roms to work 100% (MMS in particular) on flashed Sprint phones. I haven't tried yet, but I believe AOSP roms (vs TW) require some extra work to get full functionality.[/QUOTE]
This one hopefully some others can chime in as I run TW Roms myself, but this is exactly the things I want this thread to answer for ones needing help.....
Viper
Subscribing
Viper kicked @$$ and spent hours helping me til we got it down with my crap internet I had. Sure enough it auto pulled keys and boom! I had 3g and seen speeds up to 2.5mbps! Started out at 600kbps but picked up
Sent from my Galaxy Nexus using Xparent Skyblue Tapatalk 2
Have Stock ROM BLJ7
only thing that i change was SPC to 000000
Burnt
BurntBiscuits said:
Have Stock ROM BLJ7
only thing that i change was SPC to 000000
Burnt
Click to expand...
Click to collapse
Cool that will work send me your teamviewer info by PM, I will try to get freed up by 8:45 PM EST.......
Viper
Viper32 said:
Yeah good questions, I want this to be a team effort with everyone helping and learning together......
Couple of comments on your questions..
..
1) Updating the PRL on my GS3 (or other flashed Sprint phone). I currently have to activate my Fascinate, *22891, downloading PRL w/ DFS, loading it onto the GS3, then reactivating the GS3
I am not clear on why you would need to reactivate to update PRL, What PRL are you using now?
2) The proper procedure to get AOSP roms to work 100% (MMS in particular) on flashed Sprint phones. I haven't tried yet, but I believe AOSP roms (vs TW) require some extra work to get full functionality.
This one hopefully some others can chime in as I run TW Roms myself, but this is exactly the things I want this thread to answer for ones needing help.....
Viper
Click to expand...
Click to collapse
#1 - Right now I'm just using the Verizon PRL that was on my Fascinate when I got the 3G keys from it - 53022. To get rid of the roaming icon, I loaded eri.xml onto my phone and changed the carrier name to Page Plus (actually I'm not sure if this actually removed the roaming triangle, but I rarely see it anymore.)
I know there has been a VZW PRL update since then - It's something like 53078 or 53096 now. I'm in the Chicago area so the exact PRL number probably depends on that.
I'd like to update the PRL on my (sprint) GS3, however the only way I know how to do it is by reactivating the Fascinate on my account to get the newest PRL, then saving it w/ DFS, then loading it onto my GS3 using DFS (then of course reactivating the GS3).
I was under the impression that *22891 to update PRL doesn't work on flashed Sprint phones, unless I"m mistaken?
***
As for #2, I did ask xda member alphahere about getting MMS working on AOSP roms, as he had mentioned in one of the PagePlus threads that he had AOSP fully working on his Sprint GS3. He gave me the following advice (which I haven't tested yet):
/system/etc/apns-conf.xml changed to the following to fix MMS
<?xml version="1.0" encoding="utf-8"?>
<apns version="7">
<apn carrier="Verizon"
mcc="310"
mnc="004"
apn="internet"
type="default,supl,mms"
mmsc="http://mms.vtext.com/servlets/mms"
/>
</apns>
Click to expand...
Click to collapse
I believe you can do the *22890 option 2 new PRL
the problem is that when it reboots it will have a roaming unless you go into dfs/cdma and change the Preffered Settings
Sys Pref=.HomePref Pref Mode= CDMA_HDR Pref Serv =.SystemB Band Pref= Auto Roam Pref= Auto Analog=Dis
Thats is what I do
A way to tell which US Cellular S3s are unable to have keys/pass pulled?
Hi @Viper32 -
I have two quick questions:
You had written
Current Status is that I can pull keys/pass on ... Some US Cellular S3
Click to expand...
Click to collapse
. I'm looking to buy an S3 and was wondering if there was a way for me to determine if I could use your technique(s) to pull the keys/pass from a phone. Is there anything particular I can look for?
Lastly, I am wanting to flash the phone to Straight Talk and not Page Plus - do you know if I'll be able to get 3G with ST as well?
I greatly appreciate you sharing your thoughts and time here @Viper32 - huge thanks!
BurntBiscuits said:
I believe you can do the *22890 option 2 new PRL
the problem is that when it reboots it will have a roaming unless you go into dfs/cdma and change the Preffered Settings
Sys Pref=.HomePref Pref Mode= CDMA_HDR Pref Serv =.SystemB Band Pref= Auto Roam Pref= Auto Analog=Dis
Thats is what I do
Click to expand...
Click to collapse
I have to flash back to the LG2 radio to do this, correct? (To access the phone via DFS)
Bujjet said:
Hi @Viper32 -
I have two quick questions:
You had written . I'm looking to buy an S3 and was wondering if there was a way for me to determine if I could use your technique(s) to pull the keys/pass from a phone. Is there anything particular I can look for?
Lastly, I am wanting to flash the phone to Straight Talk and not Page Plus - do you know if I'll be able to get 3G with ST as well?
I greatly appreciate you sharing your thoughts and time here @Viper32 - huge thanks!
Click to expand...
Click to collapse
Page plus and straight run on same towers, so yeah, about the same process
Sent from my Galaxy Nexus using Xparent Skyblue Tapatalk 2
dirkdigles said:
I have to flash back to the LG2 radio to do this, correct? (To access the phone via DFS)
Click to expand...
Click to collapse
That is correct dirkdigles
I also believe that if your in a 4g area that it you may get a message saying " I'm sorry but we unable to program your phone at this time " when you attempt
I am in a 3g area so that might make a difference as well; since it not looking for 9900000000's to program to 4g
Burnt
and hedrids
Viper you are the man :good:
Some US Cellular
Does anyone know what @Viper32 is referring to when he says that only "Some US Cellular" phones are able to have pulled keys/pass?
I only have one chance at buying a phone, if it ends up being a no-go I'm out the $$$ - is there a way to know if this process will work with a particular US Cellular phone?
Bujjet said:
Does anyone know what @Viper32 is referring to when he says that only "Some US Cellular" phones are able to have pulled keys/pass?
I only have one chance at buying a phone, if it ends up being a no-go I'm out the $$$ - is there a way to know if this process will work with a particular US Cellular phone?
Click to expand...
Click to collapse
Well I quote that because I have only come across 2 US Cellular S3 phones, one I was able to pull keys/pass the other I was not. I would not personally run away from it if its a great deal.
Viper
Ok I am available this evening to help some out if needed......
Also I am looking for a file hosting site thats free, need recomendations? I want to put links to some different PRL's/ Programs etc. in the main Post.
Viper
Can you share your method of how to pull the aaa keys from the device?
I recently tried Slim Bean on my Epic 4G Touch. It is nice, but I get no data. I am flashed to Page Plus, so I know to expect oddities. I have tried a number of modems with no success. I checked my data settings with *#*#DATA#*#* but found that several values were not set. I wanted to try to reset them over diag mode, but unfortunately these scripts are not working for me. I also tried using the Edit button in the hidden menu, but the I receive a "Modem Exception occurs" error.
Does anyone have any helpful info? Some of the TouchWiz roms aren't bad, but I would like to be able to use AOSP and still have data.
Macadamia Daze said:
I recently tried Slim Bean on my Epic 4G Touch. It is nice, but I get no data. I am flashed to Page Plus, so I know to expect oddities. I have tried a number of modems with no success. I checked my data settings with *#*#DATA#*#* but found that several values were not set. I wanted to try to reset them over diag mode, but unfortunately these scripts are not working for me. I also tried using the Edit button in the hidden menu, but the I receive a "Modem Exception occurs" error.
Does anyone have any helpful info? Some of the TouchWiz roms aren't bad, but I would like to be able to use AOSP and still have data.
Click to expand...
Click to collapse
Use a cm10 rom from around March of last year. I use wild for the night by dastin.
Then there are scripts you can run in a terminal. That's how I always do it at least.
Sent from my SPH-D710 using XDA Premium 4 mobile app
Hey guys,
I am trying to get my Galaxy S3 working on the Freedompop network with BYOD.
I flashed to stock firmware:
MD4_update_FULL_Odex.zip
because the MSL code (##786#) that I was supposed to use to reconfigure the radio to Freedompop's network, did not work in CyanogenMod.
In the stock firmware, the code worked, and I got cellular data and voice. However, when I flashed back to CM, the Sprint icon is orange, and I don't have data connectivity any more.
This is the version of CM I flashed to:
cm-11-20140708-SNAPSHOT-M8-d2lte.zip
Any ideas for what could be wrong?
dezork said:
Hey guys,
I am trying to get my Galaxy S3 working on the Freedompop network with BYOD.
I flashed to stock firmware:
MD4_update_FULL_Odex.zip
because the MSL code (##786#) that I was supposed to use to reconfigure the radio to Freedompop's network, did not work in CyanogenMod.
In the stock firmware, the code worked, and I got cellular data and voice. However, when I flashed back to CM, the Sprint icon is orange, and I don't have data connectivity any more.
This is the version of CM I flashed to:
cm-11-20140708-SNAPSHOT-M8-d2lte.zip
Any ideas for what could be wrong?
Click to expand...
Click to collapse
Same with Carbon, but in carbon if the preferred network is 3G, or 1x, it will connect to those networks but it will not connect to LTE. I also noticed that in carbon it connects to LTE and 1xRTT instead of LTE and 1x800. Also does anyone know any possible way to go to 4.1.2 stock (from stock 4.4.2 KK)? I am also on FreedomPop btw.
Found A Fix
I searched a bit and found a fix, that didn't work at first but worked if you use it a specific way. It's the APN causing the issue. This was found out by user Merudo here on XDA. The fix is to do this:
1. Download a Ting APN fix .zip
2. Go on the ROM with working LTE (stock) and take it's apns-conf.xml (it's in /system/etc/) and copy it to the computer
3. Replace the apns-conf.xml in the Ting APN fix
4. Copy to phone with ROM and Gapps
5. Flash it in right after you flash your rom and gapps (e.g. 1st flash your rom then gapps then the APN fix)
6. Reboot and setup and it should work.
Again Kudos to Merudo for figuring this out.
Anyone get note 3 working on here? I'm on boost now with on 3g.. wondering if I can flash just a uicc card to freedom pop lte??