I unrooted my phone ages ago, havent done anything to it since, but yesterday my phone just decided to cut out, started with apps not loading, then my phone wouldn't turn on, now my phone just gets stuck into bootloop
How do I determine which stock firmware to go back to via Odin?
My phone is UK, and unlocked
When i try to go into recovery, I get the following
RECOVERY BOOTING....
SET Warranty Bit: Recovery
and it's driving me nuts, Ive tried installing a UK firmware that I believe might be the one, and Odin doesn't come back with any errors, but the same damn message applies, as far as I know, once you can get recovery working and clear cache, you should be fine, but I just cant get it to work
I've tried installed custom bootloaders, but same ol same message
Gimba89 said:
I unrooted my phone ages ago, havent done anything to it since, but yesterday my phone just decided to cut out, started with apps not loading, then my phone wouldn't turn on, now my phone just gets stuck into bootloop
How do I determine which stock firmware to go back to via Odin?
My phone is UK, and unlocked
When i try to go into recovery, I get the following
RECOVERY BOOTING....
SET Warranty Bit: Recovery
and it's driving me nuts, Ive tried installing a UK firmware that I believe might be the one, and Odin doesn't come back with any errors, but the same damn message applies, as far as I know, once you can get recovery working and clear cache, you should be fine, but I just cant get it to work
I've tried installed custom bootloaders, but same ol same message
Click to expand...
Click to collapse
Did you tried to make an custom ROM on your SD-Card?
Your right Firmware is on Sammobile by the way
Related
I was messing with my Gs2, trying out some new roms (it has been rooted and custom flashed since i got the phone a while ago) and ended up with a soft brick getting stuck at the Samsung screen during boot. No big deal I though (since this is my backup phone I didnt worry about it) and planned on flashing back to stock with Odin and starting over. I flashed the stock 4.1 via odin and it all seemed to go fine, but when it rebooted it got stuck at the same samsung screen. I left it there for like 20 minutes and it never booted. I then downloaded the stock 4.0 and same thing. I am about to try going back in time to the stock 2.3 and see if i can work my way forward from that, but if it doesnt work, what is the cause of the phone not being able to boot after all these stock flashes?
jay-red said:
I was messing with my Gs2, trying out some new roms (it has been rooted and custom flashed since i got the phone a while ago) and ended up with a soft brick getting stuck at the Samsung screen during boot. No big deal I though (since this is my backup phone I didnt worry about it) and planned on flashing back to stock with Odin and starting over. I flashed the stock 4.1 via odin and it all seemed to go fine, but when it rebooted it got stuck at the same samsung screen. I left it there for like 20 minutes and it never booted. I then downloaded the stock 4.0 and same thing. I am about to try going back in time to the stock 2.3 and see if i can work my way forward from that, but if it doesnt work, what is the cause of the phone not being able to boot after all these stock flashes?
Click to expand...
Click to collapse
Im stuck in the same boat with my S4
which ODIN version are you using and are you using the links from SAMMOBILE to get the firmware you need ? also what are your methods of procedure and is odin giving out any errors or saying pass and still no boot ?
Hello everyone, this is my first post and pretty much a cry for help.
So I'm not new to the whole rooting scene, as I did many things on my old S3, but I'm having a bit of trouble with my note 3.
I had rooted my device about a week after I got it to remove some bloatware. Flashed some ROMs to try out but ended up back on stock firmware which removed root but didn't really care. Tried to update yesterday and got the whole "you're device has been modified" thing. So I rooted again and downloaded xposed installer and that app to fake system to not get that message. Everything seemed fine, got the update and started downloading. Once it finished downloading and tried updating, I got a failed to update message then back to home screen. Went on some forums and read Kies was working for people who had rooted phones. Tested that out and started working. Download went fine, it started updating, all was good. Said update was complete and it was restarting..... Let the fun begin.
About 10 minutes later (I waited this long because I've flashed plenty of ROMs and I know the initial boot can take forever) and it was stuck at Samsung boot logo. On the top left there was a blue message saying "Recovery Rebooting." I restarted again, same thing. Did a battery pull waited a few minutes and still nothing. Wouldn't go into recovery mode, but it did go into download mode. Assumed something was wrong with the recovery so I flashed a custom one. Finally was able to go into recovery so I did factory reset/cache and rebooted. Phone was still stuck at boot logo but this time no blue message. I then found the 4.4.2 KK md5 file online so I flashed that through Odin but same story. Ended up flashing back to stock 4.3 and that's where I'm at now.
Any ideas? Am I stuck without KK forever? The only thing I think there's left to do is go completely stock by removing the Knox counter or whatever that's currently set to 0x1 on my phone. Doing the whole "Triangle away" thing but idk if that'll make a difference.
Sorry for the really long post but I'd prefer to explain everything I've tried so far.
You might have had a bad download from the odin.tar.md5 file redownload and flash again i have heard other pwople say they had to flash it 2 times for it to take and once u do the update to 4.4.2 you cannot revert back to 4.3
Sent from my SM-N900T using XDA Premium 4 mobile app
cvall91 said:
Hello everyone, this is my first post and pretty much a cry for help.
So I'm not new to the whole rooting scene, as I did many things on my old S3, but I'm having a bit of trouble with my note 3.
I had rooted my device about a week after I got it to remove some bloatware. Flashed some ROMs to try out but ended up back on stock firmware which removed root but didn't really care. Tried to update yesterday and got the whole "you're device has been modified" thing. So I rooted again and downloaded xposed installer and that app to fake system to not get that message. Everything seemed fine, got the update and started downloading. Once it finished downloading and tried updating, I got a failed to update message then back to home screen. Went on some forums and read Kies was working for people who had rooted phones. Tested that out and started working. Download went fine, it started updating, all was good. Said update was complete and it was restarting..... Let the fun begin.
About 10 minutes later (I waited this long because I've flashed plenty of ROMs and I know the initial boot can take forever) and it was stuck at Samsung boot logo. On the top left there was a blue message saying "Recovery Rebooting." I restarted again, same thing. Did a battery pull waited a few minutes and still nothing. Wouldn't go into recovery mode, but it did go into download mode. Assumed something was wrong with the recovery so I flashed a custom one. Finally was able to go into recovery so I did factory reset/cache and rebooted. Phone was still stuck at boot logo but this time no blue message. I then found the 4.4.2 KK md5 file online so I flashed that through Odin but same story. Ended up flashing back to stock 4.3 and that's where I'm at now.
Any ideas? Am I stuck without KK forever? The only thing I think there's left to do is go completely stock by removing the Knox counter or whatever that's currently set to 0x1 on my phone. Doing the whole "Triangle away" thing but idk if that'll make a difference.
Sorry for the really long post but I'd prefer to explain everything I've tried so far.
Click to expand...
Click to collapse
I thought rooted phones weren't allowed to update via Kies or OTA.
allenjthomsen said:
You might have had a bad download from the odin.tar.md5 file redownload and flash again i have heard other pwople say they had to flash it 2 times for it to take and once u do the update to 4.4.2 you cannot revert back to 4.3
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I guess I'll try to download it again and see if that works. Do you know if that's through Kies or through manually downloading it then using Odin?
Techngro said:
I thought rooted phones weren't allowed to update via Kies or OTA.
Click to expand...
Click to collapse
Well it seemed to update for me. At least the verification process went through. I used Wanam Xposed and had the fake system status thing checked. Either way something went wrong and didn't finish the updating process and got stuck at boot logo with no recovery options.
The OTA update did not work though. I was able to get the update downloading after Wanam, but once the download finished, the update failed before trying to install. Did not try OTA again though I just went to Kies, then Odin. But all 3 methods failed.
I ended up having to use CF auto-root, I was able to update cwm from within it.
After I tried rooting (didn't notice the guide I was using was 3 years old until it was too late) my phone got the "KERNEL IS NOT SEANDROID ENFORCING" and "SET WARRANTY BIT: KERNEL" . And it would not ****ing start up. My phone was 4.4.4 and I was trying to flash some 4.2.2 or later stuff onto it I guess, it messed my phone up. The only one and I mean ONLY one that would work was the 4.2.2 auto-root.
I was on kies before all of it and now kies won't even read my phone. Any way I can get my phone back to normal now, and possibly try the rooting again? It's slow and laggy now, my SD card won't be read, and my wifi doesn't work. I'm quite miserable but at least my phone works.. I have root access now so maybe I can fix it from within the phone? I appreciate the help!
EDIT: I tried getting cyanogen rom onto it and it got all messed up again after that, wouldn't get past cyanogen loading animation so I had to figure out how to fix it again for another 3 hours -.-
dameware said:
I ended up having to use CF auto-root, I was able to update cwm from within it.
After I tried rooting (didn't notice the guide I was using was 3 years old until it was too late) my phone got the "KERNEL IS NOT SEANDROID ENFORCING" and "SET WARRANTY BIT: KERNEL" . And it would not ****ing start up. My phone was 4.4.4 and I was trying to flash some 4.2.2 or later stuff onto it I guess, it messed my phone up. The only one and I mean ONLY one that would work was the 4.2.2 auto-root.
I was on kies before all of it and now kies won't even read my phone. Any way I can get my phone back to normal now, and possibly try the rooting again? It's slow and laggy now, my SD card won't be read, and my wifi doesn't work. I'm quite miserable but at least my phone works.. I have root access now so maybe I can fix it from within the phone? I appreciate the help!
EDIT: I tried getting cyanogen rom onto it and it got all messed up again after that, wouldn't get past cyanogen loading animation so I had to figure out how to fix it again for another 3 hours -.-
Click to expand...
Click to collapse
Go to this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Download the NH7 or NK2 firmware (both are 4.4.4) and flash it using ODIN. Not sure why Kies isn't seeing your phone, it should, but ODIN should work. You may have to flash, pull battery, flash again, all without rebooting, for it to take.
This will get you back to stock. Then, if you want to root, get the CFAutoRoot for the phone, this will flash a non-stock recovery to give you root. This will give you the SEANDROID messages you were seeing. Use Triangle Away, if you want to get rid of them.
Rob
rlichtefeld said:
Go to this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Download the NH7 or NK2 firmware (both are 4.4.4) and flash it using ODIN. Not sure why Kies isn't seeing your phone, it should, but ODIN should work. You may have to flash, pull battery, flash again, all without rebooting, for it to take.
This will get you back to stock. Then, if you want to root, get the CFAutoRoot for the phone, this will flash a non-stock recovery to give you root. This will give you the SEANDROID messages you were seeing. Use Triangle Away, if you want to get rid of them.
Rob
Click to expand...
Click to collapse
It won't read it because my phone is now too old of a device for the program (2.2.2 or whatever). Thank you very much I'm trying all this right now, finally a firmware download that doesn't take 6 hours because of horrible servers!
I will update on if this works or not, I'm guessing it will
I am having a similar situation. I used CM installer to root my S4 then the screen went white and the Installer stopped working. I tried to reset but only got the same Enforcing and warrant messages and the CyanogenMod loading screen.
I am trying to get to recovery mode by doing power+home+volume up button. I got into there and seeing a menu of commands. What should I do now? Will factory reset get me back into original state or I need to install a zip?
Lopakas said:
I am having a similar situation. I used CM installer to root my S4 then the screen went white and the Installer stopped working. I tried to reset but only got the same Enforcing and warrant messages and the CyanogenMod loading screen.
I am trying to get to recovery mode by doing power+home+volume up button. I got into there and seeing a menu of commands. What should I do now? Will factory reset get me back into original state or I need to install a zip?
Click to expand...
Click to collapse
EDIT:
Done and done! It all worked out, thank you thank you!
Now to try cyanogen and my device will be back to beast mode.
Just do what he says and you should be fine; factory reset never did anything for me :/
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
eousphoros said:
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
Click to expand...
Click to collapse
thank you so much for the quick reply, I ended up figuring out the solution while you were typing. sorry to pull you away from other tasks. I have several backups saved to my PC but thank you for the reminder!! :laugh::laugh:
kswa1987 said:
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
Click to expand...
Click to collapse
I had the same excat same thing happen when flashing this via Odin. I didnt need to Odin stock twice though . I just booted stock recovery and did a factory reset. After that I went ahead an powered down and rebooted . All good now
How long did you have to wait in the stock recovery to get past the "installing system update" screen? Mine just sits there and I'm unable to view other options in recovery.
EDIT for noobs (like me): wait 30 seconds on the "installing system update" screen.
I'm still stuck in boot loop
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Creel711 said:
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Click to expand...
Click to collapse
Looks here, may apply to your case. http://forum.xda-developers.com/showthread.php?p=63226466
Pp.
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Problem with Samsung Galaxy S4 Mini GT-I9195
Hi everyone
I'm new to the whole ROM flashing and using Odin. I had a bootloop problem and recovery mode showed all the options but has a green android man laying down with red icon above him and No Command below the android man. Tried the factory wipe and cache wipe but it gives some red writing with the word failed in the coding and the word error under the android man. Tried to flash a stock ROM from sammobile using Odin. Odin gives a pass but the same problems persist. Can someone please help?
any solution, i have this problem to? only bootloop, nothing else. Updatet bootloader with 4up
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
had the same issue ... did a factory wipe...(had lineage os 14 installed with gapps 7.1.1) flashed stock rom using odin(success) . stuck in bootloop(samsung logo fades in and out) pleaase help (sm-g900H)
Very usefull post, same issue, solved trough recovery->wipedata/factoryreset. Thanks!!!!
my s6 was freezing and restarting again and again, I reinstalled the firmware for odin and then it didn't encounter any problem for a whole day but now i have the same problem again - freezing and restarting
any help would be appreciated
I am already done with factory reset and wiping cache partition but still nothing turnout to be helpful
Hi Please help me.
I did everything that mentioned but no succes at all. Any new suggestion?
Btw my phone passing ODIN and stuck in "installing system updates then erasing"
hello
i need downgred g925t frome androide 7 to 6 or 5.1.1
can anyone help me
im flashed phone whit dis frimwer from anroide 7 G925TUVS6FRC1_G925TTMB6FRC1_TMB
im dawnloaded this frimwer 4Files-G925TTMB3EPD1-6.0.1-By-NoLoGiG but not work or not flashed have error
So my issue is pretty similar, see what you guys think. i been trying everything i can think of.
i updated from xtrestolite 2.1 to 2.2 with out wiping. everything worked fine except when i would make calls, the other people could not hear me. so i updated the bootloader and modem again (i had done it before) and the problem persisted. i flashed back to stock and was getting stuck at the s6 edge screen. the only way to get around this was and get my phone to boot was to flash aou kernel. i was still having a similar issue with calling so I download a modem from a diffrent server and all of a sudden, it was working again on stock firmware... AWESOME!
now that i had all that done and my phone working as it should, i reset my phone for the first time and i got the FRP lock, wont boot phone because custom kernel. GREAT
I then flashed stock of6 again, the tar ball, and the 4 piece version. no dice
i then found of8, tried to flash that still no dice.
id love to flash twrp and load a rom on, but FRP is a alsjdflajs.
the phone will flash successfully, but upon reboot, it will go into recovery, run its course, reboot, and get stuck that the galaxy s6 edge screen.
i use the vol and power click during recovery to see what its doing and everything seems to go fine. it will then say failed to mount /data. im hoping flashing this with the pit file will work, but i cannot download the pit file from my work computer (hahah its blocks on 4shard and mega).
anyone have any other advice? i will update if i figure it out.
Regards team,
-Mad
p.s. none of this is xtrestolite's fault, that rom has been nothing but good to me.. my phone has been picky though. after 5.1.1 i had to flash a custom kernel in order for the digitizer to function properly.... any help is appriciated guys.
SO UPDATE!
nothing good, i tried the pit with of6 and of8, no dice. still stuck.
anyone got a s6 edge w a broken screen? you can claim it lost for all i care.
no one?
i guess if anything past flash stock firmware people dont know? was hoping for alittle more insight.
im sure if i could flash a kernel i could get it to turn on, but FRP has be at bay...
no help for you bro...Samsung just needs to release there software fixing for this comunity...I'm looking a for a dev to answer my question in this section about just flashing zip files in twrp instead of using odin or whatever other methods that can avoid all these problems that are all similar...hopefully in next few months it will be addressed
Hey mate, try this...
http://forum.xda-developers.com/showthread.php?p=61531848
Sent from my SM-G925T using Tapatalk 2
holy... fu34%# /S45it.... IT BOOT?!
after flashing every firmware 100000 times...
THANK YOU!
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.