[Q] Stuck at boot when updating to KK - T-Mobile Samsung Galaxy Note 3

Hello everyone, this is my first post and pretty much a cry for help.
So I'm not new to the whole rooting scene, as I did many things on my old S3, but I'm having a bit of trouble with my note 3.
I had rooted my device about a week after I got it to remove some bloatware. Flashed some ROMs to try out but ended up back on stock firmware which removed root but didn't really care. Tried to update yesterday and got the whole "you're device has been modified" thing. So I rooted again and downloaded xposed installer and that app to fake system to not get that message. Everything seemed fine, got the update and started downloading. Once it finished downloading and tried updating, I got a failed to update message then back to home screen. Went on some forums and read Kies was working for people who had rooted phones. Tested that out and started working. Download went fine, it started updating, all was good. Said update was complete and it was restarting..... Let the fun begin.
About 10 minutes later (I waited this long because I've flashed plenty of ROMs and I know the initial boot can take forever) and it was stuck at Samsung boot logo. On the top left there was a blue message saying "Recovery Rebooting." I restarted again, same thing. Did a battery pull waited a few minutes and still nothing. Wouldn't go into recovery mode, but it did go into download mode. Assumed something was wrong with the recovery so I flashed a custom one. Finally was able to go into recovery so I did factory reset/cache and rebooted. Phone was still stuck at boot logo but this time no blue message. I then found the 4.4.2 KK md5 file online so I flashed that through Odin but same story. Ended up flashing back to stock 4.3 and that's where I'm at now.
Any ideas? Am I stuck without KK forever? The only thing I think there's left to do is go completely stock by removing the Knox counter or whatever that's currently set to 0x1 on my phone. Doing the whole "Triangle away" thing but idk if that'll make a difference.
Sorry for the really long post but I'd prefer to explain everything I've tried so far.

You might have had a bad download from the odin.tar.md5 file redownload and flash again i have heard other pwople say they had to flash it 2 times for it to take and once u do the update to 4.4.2 you cannot revert back to 4.3
Sent from my SM-N900T using XDA Premium 4 mobile app

cvall91 said:
Hello everyone, this is my first post and pretty much a cry for help.
So I'm not new to the whole rooting scene, as I did many things on my old S3, but I'm having a bit of trouble with my note 3.
I had rooted my device about a week after I got it to remove some bloatware. Flashed some ROMs to try out but ended up back on stock firmware which removed root but didn't really care. Tried to update yesterday and got the whole "you're device has been modified" thing. So I rooted again and downloaded xposed installer and that app to fake system to not get that message. Everything seemed fine, got the update and started downloading. Once it finished downloading and tried updating, I got a failed to update message then back to home screen. Went on some forums and read Kies was working for people who had rooted phones. Tested that out and started working. Download went fine, it started updating, all was good. Said update was complete and it was restarting..... Let the fun begin.
About 10 minutes later (I waited this long because I've flashed plenty of ROMs and I know the initial boot can take forever) and it was stuck at Samsung boot logo. On the top left there was a blue message saying "Recovery Rebooting." I restarted again, same thing. Did a battery pull waited a few minutes and still nothing. Wouldn't go into recovery mode, but it did go into download mode. Assumed something was wrong with the recovery so I flashed a custom one. Finally was able to go into recovery so I did factory reset/cache and rebooted. Phone was still stuck at boot logo but this time no blue message. I then found the 4.4.2 KK md5 file online so I flashed that through Odin but same story. Ended up flashing back to stock 4.3 and that's where I'm at now.
Any ideas? Am I stuck without KK forever? The only thing I think there's left to do is go completely stock by removing the Knox counter or whatever that's currently set to 0x1 on my phone. Doing the whole "Triangle away" thing but idk if that'll make a difference.
Sorry for the really long post but I'd prefer to explain everything I've tried so far.
Click to expand...
Click to collapse
I thought rooted phones weren't allowed to update via Kies or OTA.

allenjthomsen said:
You might have had a bad download from the odin.tar.md5 file redownload and flash again i have heard other pwople say they had to flash it 2 times for it to take and once u do the update to 4.4.2 you cannot revert back to 4.3
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I guess I'll try to download it again and see if that works. Do you know if that's through Kies or through manually downloading it then using Odin?
Techngro said:
I thought rooted phones weren't allowed to update via Kies or OTA.
Click to expand...
Click to collapse
Well it seemed to update for me. At least the verification process went through. I used Wanam Xposed and had the fake system status thing checked. Either way something went wrong and didn't finish the updating process and got stuck at boot logo with no recovery options.
The OTA update did not work though. I was able to get the update downloading after Wanam, but once the download finished, the update failed before trying to install. Did not try OTA again though I just went to Kies, then Odin. But all 3 methods failed.

Related

[Q] Help - cannot boot up the phone

I rooted my phone with GALAXY NOTE 2 Toolkit. It was working fine for few months. Recently I noticed a problem when I tried to reboot it, but I pulled the battery out and after reinserting all went OK. then Next day or two another time when I tried to reboot, I got to the point where I cannot boo the phone anymore. I get to the initial T-MOBILE screen and that's where it gets stuck.
I tried to upload a recent ROM through Odin. It worked fine, no errors, no problems, but when I try to boo the same thing happens.
I also tried to get to the other menu ( Power+Home+VolumeUp). It shows the menu with some options but I'm not sure how can I use those. I treid few things but it does not work.
I need to use the phone for work every day so I am completely stuck and this is critical for me.
I would appreciate any help.
Arthur
SAME HERE!!!
aklisiewicz said:
i rooted my phone with galaxy note 2 toolkit. It was working fine for few months. Recently i noticed a problem when i tried to reboot it, but i pulled the battery out and after reinserting all went ok. Then next day or two another time when i tried to reboot, i got to the point where i cannot boo the phone anymore. I get to the initial t-mobile screen and that's where it gets stuck.
I tried to upload a recent rom through odin. It worked fine, no errors, no problems, but when i try to boo the same thing happens.
I also tried to get to the other menu ( power+home+volumeup). It shows the menu with some options but i'm not sure how can i use those. I treid few things but it does not work.
I need to use the phone for work every day so i am completely stuck and this is critical for me.
I would appreciate any help.
Arthur
Click to expand...
Click to collapse
i have same issue..
I just odin 4.3 file and everything went to okay.. But stuck on samsung galaxy note2..
I did several number and number og count became 7 and knox warranty void 1...
Could go to down or recovery mode and installing roms but stuck...
Also how can i reset the count? Can i install stock image to go back?
Thank you in advance..
go to recovery mode if you can
kim621973 said:
i have same issue..
I just odin 4.3 file and everything went to okay.. But stuck on samsung galaxy note2..
I did several number and number og count became 7 and knox warranty void 1...
Could go to down or recovery mode and installing roms but stuck...
Also how can i reset the count? Can i install stock image to go back?
Thank you in advance..
Click to expand...
Click to collapse
i just figure it out that go back to recovery mode and do factory reset couple time and boot it!!
back up to normal mine...
do odin 4.3 stock image
go back to recovery mode.
wipe cache/factory reset x3
boot it...
one more thing that you can't downgrade to 4.1.2 or..etc.. if odin 4.3 update it..
i think that someone mentioned..be careful..
we need kill the KNOX ON 4.3 UPDATE FILE...
ALL THE TROUBLE COMING FROM THE KNOX...
THANK YOU.
I HOPE THAT IT HELP!!!!.
kim621973 said:
i just figure it out that go back to recovery mode and do factory reset couple time and boot it!!
back up to normal mine...
do odin 4.3 stock image
go back to recovery mode.
wipe cache/factory reset x3
boot it...
one more thing that you can't downgrade to 4.1.2 or..etc.. if odin 4.3 update it..
i think that someone mentioned..be careful..
we need kill the KNOX ON 4.3 UPDATE FILE...
ALL THE TROUBLE COMING FROM THE KNOX...
THANK YOU.
I HOPE THAT IT HELP!!!!.
Click to expand...
Click to collapse
While Knox is a problem, the bootloader is the booger that won't allow return to 4.1.2. Sammy hosed us on that little bit of trickery.
If my wife didn't have a GS3 that I maintain I might have OTA'd. I have been watching their "upgrade" process for a while and knew that there was trouble in the OTA.
It will be painful for a while as people migrate in with problems that have been covered several times. We'll get through it.
Hastily spouted for your befuddlement

Would like to return phone to Normal State

I ended up having to use CF auto-root, I was able to update cwm from within it.
After I tried rooting (didn't notice the guide I was using was 3 years old until it was too late) my phone got the "KERNEL IS NOT SEANDROID ENFORCING" and "SET WARRANTY BIT: KERNEL" . And it would not ****ing start up. My phone was 4.4.4 and I was trying to flash some 4.2.2 or later stuff onto it I guess, it messed my phone up. The only one and I mean ONLY one that would work was the 4.2.2 auto-root.
I was on kies before all of it and now kies won't even read my phone. Any way I can get my phone back to normal now, and possibly try the rooting again? It's slow and laggy now, my SD card won't be read, and my wifi doesn't work. I'm quite miserable but at least my phone works.. I have root access now so maybe I can fix it from within the phone? I appreciate the help!
EDIT: I tried getting cyanogen rom onto it and it got all messed up again after that, wouldn't get past cyanogen loading animation so I had to figure out how to fix it again for another 3 hours -.-
dameware said:
I ended up having to use CF auto-root, I was able to update cwm from within it.
After I tried rooting (didn't notice the guide I was using was 3 years old until it was too late) my phone got the "KERNEL IS NOT SEANDROID ENFORCING" and "SET WARRANTY BIT: KERNEL" . And it would not ****ing start up. My phone was 4.4.4 and I was trying to flash some 4.2.2 or later stuff onto it I guess, it messed my phone up. The only one and I mean ONLY one that would work was the 4.2.2 auto-root.
I was on kies before all of it and now kies won't even read my phone. Any way I can get my phone back to normal now, and possibly try the rooting again? It's slow and laggy now, my SD card won't be read, and my wifi doesn't work. I'm quite miserable but at least my phone works.. I have root access now so maybe I can fix it from within the phone? I appreciate the help!
EDIT: I tried getting cyanogen rom onto it and it got all messed up again after that, wouldn't get past cyanogen loading animation so I had to figure out how to fix it again for another 3 hours -.-
Click to expand...
Click to collapse
Go to this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Download the NH7 or NK2 firmware (both are 4.4.4) and flash it using ODIN. Not sure why Kies isn't seeing your phone, it should, but ODIN should work. You may have to flash, pull battery, flash again, all without rebooting, for it to take.
This will get you back to stock. Then, if you want to root, get the CFAutoRoot for the phone, this will flash a non-stock recovery to give you root. This will give you the SEANDROID messages you were seeing. Use Triangle Away, if you want to get rid of them.
Rob
rlichtefeld said:
Go to this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Download the NH7 or NK2 firmware (both are 4.4.4) and flash it using ODIN. Not sure why Kies isn't seeing your phone, it should, but ODIN should work. You may have to flash, pull battery, flash again, all without rebooting, for it to take.
This will get you back to stock. Then, if you want to root, get the CFAutoRoot for the phone, this will flash a non-stock recovery to give you root. This will give you the SEANDROID messages you were seeing. Use Triangle Away, if you want to get rid of them.
Rob
Click to expand...
Click to collapse
It won't read it because my phone is now too old of a device for the program (2.2.2 or whatever). Thank you very much I'm trying all this right now, finally a firmware download that doesn't take 6 hours because of horrible servers!
I will update on if this works or not, I'm guessing it will
I am having a similar situation. I used CM installer to root my S4 then the screen went white and the Installer stopped working. I tried to reset but only got the same Enforcing and warrant messages and the CyanogenMod loading screen.
I am trying to get to recovery mode by doing power+home+volume up button. I got into there and seeing a menu of commands. What should I do now? Will factory reset get me back into original state or I need to install a zip?
Lopakas said:
I am having a similar situation. I used CM installer to root my S4 then the screen went white and the Installer stopped working. I tried to reset but only got the same Enforcing and warrant messages and the CyanogenMod loading screen.
I am trying to get to recovery mode by doing power+home+volume up button. I got into there and seeing a menu of commands. What should I do now? Will factory reset get me back into original state or I need to install a zip?
Click to expand...
Click to collapse
EDIT:
Done and done! It all worked out, thank you thank you!
Now to try cyanogen and my device will be back to beast mode.
Just do what he says and you should be fine; factory reset never did anything for me :/

Bootloops After ODIN back to Stock Firmware

Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
eousphoros said:
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
Click to expand...
Click to collapse
thank you so much for the quick reply, I ended up figuring out the solution while you were typing. sorry to pull you away from other tasks. I have several backups saved to my PC but thank you for the reminder!! :laugh::laugh:
kswa1987 said:
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
Click to expand...
Click to collapse
I had the same excat same thing happen when flashing this via Odin. I didnt need to Odin stock twice though . I just booted stock recovery and did a factory reset. After that I went ahead an powered down and rebooted . All good now
How long did you have to wait in the stock recovery to get past the "installing system update" screen? Mine just sits there and I'm unable to view other options in recovery.
EDIT for noobs (like me): wait 30 seconds on the "installing system update" screen.
I'm still stuck in boot loop
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Creel711 said:
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Click to expand...
Click to collapse
Looks here, may apply to your case. http://forum.xda-developers.com/showthread.php?p=63226466
Pp.
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Problem with Samsung Galaxy S4 Mini GT-I9195
Hi everyone
I'm new to the whole ROM flashing and using Odin. I had a bootloop problem and recovery mode showed all the options but has a green android man laying down with red icon above him and No Command below the android man. Tried the factory wipe and cache wipe but it gives some red writing with the word failed in the coding and the word error under the android man. Tried to flash a stock ROM from sammobile using Odin. Odin gives a pass but the same problems persist. Can someone please help?
any solution, i have this problem to? only bootloop, nothing else. Updatet bootloader with 4up
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
had the same issue ... did a factory wipe...(had lineage os 14 installed with gapps 7.1.1) flashed stock rom using odin(success) . stuck in bootloop(samsung logo fades in and out) pleaase help (sm-g900H)
Very usefull post, same issue, solved trough recovery->wipedata/factoryreset. Thanks!!!!
my s6 was freezing and restarting again and again, I reinstalled the firmware for odin and then it didn't encounter any problem for a whole day but now i have the same problem again - freezing and restarting
any help would be appreciated
I am already done with factory reset and wiping cache partition but still nothing turnout to be helpful
Hi Please help me.
I did everything that mentioned but no succes at all. Any new suggestion?
Btw my phone passing ODIN and stuck in "installing system updates then erasing"
hello
i need downgred g925t frome androide 7 to 6 or 5.1.1
can anyone help me
im flashed phone whit dis frimwer from anroide 7 G925TUVS6FRC1_G925TTMB6FRC1_TMB
im dawnloaded this frimwer 4Files-G925TTMB3EPD1-6.0.1-By-NoLoGiG but not work or not flashed have error

[Q] Custom Binary blocked by Reactivation Block (Help!!! Please.)

Or... "How I was dumb".
I have a Sprint Note 4 (SM-910P) that I have had rooted for the past few months. I got interested in the new update that was release this month, so I flashed back to stock, ran the updates, and re-rooted over the weekend. I also decided to activate that new "Reactivation Lock" feature (you can see where this is going).
So it occurred to me that I had not reinstalled Cerberus, so downloaded the APK and went to boot into recovery so I could install it to root. I forgot to turn off my "Reactivation Lock", so it booted to a black screen with a yellow triangle and the message: "Custom Binary blocked by Reactivation Block. Secure Fail: Recovery". Pressing the power button turns the phone off. Trying to boot into recovery produces the same error. I can still boot into download mode.
I have been doing some research on how to fix this, and have found two suggested fixes, neither of which work for me:
Fix 1 tells me to boot into download mode, pull the battery, reinsert the battery, and the phone should boot up normally. This doesn't work.
Fix 2 tells me to boot into download mode, and flash to stock with Odin. I have downloaded the stock .tar and tried to flash it with Odin 3.10. I get a fail message. (Full Disclosure: I have only tried Fix 2 on my work test PC. It is an old Vista box that is very slow. I don't know if that is a contributing factor.)
I was hoping that some of you folks had some advice for me. I have all of my data backed up, so I'm not worried about starting over with a clean slate. I'm also not worried about tripping KNOX. That ship has sailed at this point. I just want my phone back.
thescreg said:
Or... "How I was dumb".
I have a Sprint Note 4 (SM-910P) that I have had rooted for the past few months. I got interested in the new update that was release this month, so I flashed back to stock, ran the updates, and re-rooted over the weekend. I also decided to activate that new "Reactivation Lock" feature (you can see where this is going).
So it occurred to me that I had not reinstalled Cerberus, so downloaded the APK and went to boot into recovery so I could install it to root. I forgot to turn off my "Reactivation Lock", so it booted to a black screen with a yellow triangle and the message: "Custom Binary blocked by Reactivation Block. Secure Fail: Recovery". Pressing the power button turns the phone off. Trying to boot into recovery produces the same error. I can still boot into download mode.
I have been doing some research on how to fix this, and have found two suggested fixes, neither of which work for me:
Fix 1 tells me to boot into download mode, pull the battery, reinsert the battery, and the phone should boot up normally. This doesn't work.
Fix 2 tells me to boot into download mode, and flash to stock with Odin. I have downloaded the stock .tar and tried to flash it with Odin 3.10. I get a fail message. (Full Disclosure: I have only tried Fix 2 on my work test PC. It is an old Vista box that is very slow. I don't know if that is a contributing factor.)
I was hoping that some of you folks had some advice for me. I have all of my data backed up, so I'm not worried about starting over with a clean slate. I'm also not worried about tripping KNOX. That ship has sailed at this point. I just want my phone back.
Click to expand...
Click to collapse
You updated to oe1. You need to get someones oe1 backup. As far as the lock out. Im not sure. I believe you can fix it from samsung site login to the device lock page? Not even sure it exists. But once you boot you should have the security option to enter your credentials. So just look on the thread about oe1 update. Someone posted a backup.
Sent from my SM-N910P using XDA Free mobile app
Well think ice broken through the oem bs i got 3 devs looking it a workaround the get ofin up
I FIXED IT!
Here is what I did. I got home, and reread some of the stuff that I found. I was going through a step-by-step provided by Xharky.
http://forum.xda-developers.com/showpost.php?p=53920665&postcount=25
Xharky said that it didn't really matter what you flashed in Odin, that you would probably get an error and that the phone would boot normally after a battery pull. So when I tried flashing the stock .tar with Odin 3.10, it failed, but the phone didn't boot back up; wrote off that fix.
When I got home, I sat down and thought it all out. Odin 3.09 has never worked well for me, and I had never used 3.10 before today. However, I haven't had any problems with Odin 3.07. So I fired it up, and flashed CF Auto Root. Sure enough, I got a fail result in Odin. I did a battery pull and rebooted... And my phone booted right up. I promptly got into my security settings and deactivated that damn Reactivation Block.
thescreg said:
I FIXED IT!
Here is what I did. I got home, and reread some of the stuff that I found. I was going through a step-by-step provided by Xharky.
http://forum.xda-developers.com/showpost.php?p=53920665&postcount=25
Xharky said that it didn't really matter what you flashed in Odin, that you would probably get an error and that the phone would boot normally after a battery pull. So when I tried flashing the stock .tar with Odin 3.10, it failed, but the phone didn't boot back up; wrote off that fix.
When I got home, I sat down and thought it all out. Odin 3.09 has never worked well for me, and I had never used 3.10 before today. However, I haven't had any problems with Odin 3.07. So I fired it up, and flashed CF Auto Root. Sure enough, I got a fail result in Odin. I did a battery pull and rebooted... And my phone booted right up. I promptly got into my security settings and deactivated that damn Reactivation Block.
Click to expand...
Click to collapse
Awesome bro. Thats what i like to hear. A true android heart. Im on the "beat the OE1" task in my head. Im running options and scouring. Lol.
Sent from my SM-N910P using XDA Free mobile app
Yea i beat oe1 also i downgraded
pbedard have you successfully downgraded from the OE1 update back to NK2 or OB7? I took the OE1 update two days after it came out. I didn't research it didn't make a nandroid like an idiot after I updated to OE1. Once I took it I decided I didnt like it so I Odin'd the official NK2 tar it failed then i proceeded to boot twrp recovery restore my NK2 backup I had before I odin'd the offical OB7 tar to take the OE1. Then we have Bootloop. I managed to flash the bobcat rom only I didnt flash the separate theme zip with it like you're supposed to but it's been working for now, not without bugs and a fc of apps every now and then. In my about device it states software OE1, baseband OE1, android version 4.4.4, kernel version 3.10.5-AELKernel-v5.5, and build number KTU84P.N910PVPU1ANK2. I'm guessing I'm just going to have to wait until the OE1 tar is out and just deal with the stockness of it until devs get their OE1 roms out. Thanks in advance if you have any input or thoughts on this depressing matter.
I got a new phone now from sprint i made it look like a softwsre issue
pbedard said:
I got a new phone now from sprint i made it look like a softwsre issue
Click to expand...
Click to collapse
How did you get a stock recovery. Store tried to factory reset mines and when they saw TWRP they new it was rooted, so vioded. If I can get stock recovery then i can fool them, lol. If you have any let me know, thanks in advance.
I backed it up with flashify
---------- Post added at 04:48 AM ---------- Previous post was at 04:47 AM ----------
If u know gow to use it ill give u a copy im not responsible thoigh if u hurt your device
I'd be willing to try it. I know exactly what store to take it too.
christophfloor said:
I'd be willing to try it. I know exactly what store to take it too.
Click to expand...
Click to collapse
Careful. A neighbor of mine did this once. Took about a month. His replacement after a couple of weeks stopped getting signal. He called the carrier and they said the phone he sent in was found flagged by asurion. Which they sent a note to his account. So his new phone was blacklisted until he paid for the brick. Take caution. They are catching on. Not saying this will surely happen but if people keep brick returning this will only get worse. Just a heads up. I have never returned a brick but I have returned rooted.
Sent from my SM-N910P using XDA Free mobile app
flynhawn2002 said:
How did you get a stock recovery. Store tried to factory reset mines and when they saw TWRP they new it was rooted, so vioded. If I can get stock recovery then i can fool them, lol. If you have any let me know, thanks in advance.
Click to expand...
Click to collapse
Well, here's a link to a flashable stock recovery zip for OB7 that I put together for you if it would help.
It is what it is... Flash at your own peril ...
RE-EDIT:
OB7 Stock Recovery Here
This IS a flashable ZIP
I'm still looking for the OE1 OTA update zip... Anyone have it?

[Q] help - i think my phone is temporary bricked

hi,
so i just got my s6 edge for sprint shipped to me (it wasn't activated to any service when i got it). here is the order of events i took:
1) tried to activate my service, but there was a delay in porting the #
2) while waiting for them to port it, i rooted it, installed twrp and a rom (this was when it was on 5.0.2)
3) they called and said they were ready to port, but the new rom didn't have the activation software in it. so i stalled them and said i would call back. i then reverted back to stock using odin.
4) got the number ported and was fine using the phone at that point.
5) this is where the day turned bad...... i didn't realize that coincidentally today, a new firmware was released to 5.1.1 and the phone auto-updated to it while i wasn't looking
6) i went to go re-root it using the same 5.02 root and now my phone is stuck. it's sitting on the "Samsung Galaxy S6 Edge, Powered by Android" screen and in the top left in red it says "RECOVERY IS NOT SEANDROID ENFORCING"
7) i tried to restore it back to the stock using odin, but it errored in the download mode (i don't remember the error off hand)
i can get into download mode, and that's about it. i had to let the phone's battery die on it's own to turn it off (this phone gets super hot, btw)
so i guess what i need to know is how to restore back to factory default again, now that it thinks it's on 5.1.1. is there any hope?
I'm in the same boat as you, I think the only hope is to wait until the firmware is available to download and install it via Odin. Let me know if you've had any luck getting it up and running again. I had to switch back to my old phone for the time being.
bbacon said:
I'm in the same boat as you, I think the only hope is to wait until the firmware is available to download and install it via Odin. Let me know if you've had any luck getting it up and running again. I had to switch back to my old phone for the time being.
Click to expand...
Click to collapse
check this post, download the tar and flash it in odin. it worked for my phone!
http://forum.xda-developers.com/showpost.php?p=61650724&postcount=142
it got me into a recovery image that worked and i was able to factory reset in there. my phone is booting properly now. (after it reboots when done, it took a bit on the first title screen to do anything, just be patient)
Thanks man, that worked great. Although I found out in the process of trying to fix it the past few days, I must have flashed a non-compatible kernel because once it boots the touch screen is unresponsive. I guess I'll have to wait until the firmware download is available after all. Thanks again for the help though

Categories

Resources