Related
Hey guys, I have a problem with my Samsung Galaxy S III running on AOKP jb-mr2 4.3.1. As the title says, my phone can't play any sounds. This problem surfaced after I got home from a long day out. The only thing I can think of that would effect my phone's sound system would be the AUX cable that I connected my phone to my friend's car (my AUX cable has been known to play music unevenly, like playing music through one side of the car rather than both, but I've been able to work around that by messing with the position of the cable). The music played often with random spikes of static, but it was overall unnoticeable so I thought the static wasn't going to be a problem. Turned out to be a problem when I plugged in my headset - music would only play through the right of my headset and with static. My phone doesn't even play ringtones or notification sounds now. Was it possible that the AUX cable ruined my phone's sound? I want to know if there's a way I can fix it without having to clear all of my data and flashing again (if it's not a hardware problem - hopefully it isn't) because I depend on my phone as my alarm.
Also, I flashed Awesome Beats a while back, but it didn't work and kept crashing so I switched back to the stock musicfx. I'm pretty sure that Awesome Beats isn't what's causing problems with my sound because the problem appeared after the AUX cable incident, but I'm not an expert so maybe you guys can determine it for me.
Thanks in advance!
If your Volume levels are all up and yet there's no sound then reboot. If the problem still persists, wipe Dalvik + Cache.
If all that fails, suspect shorted Audio Jack and wipe completely and Odin Flash back to stock.
Perseus71 said:
If your Volume levels are all up and yet there's no sound then reboot. If the problem still persists, wipe Dalvik + Cache.
If all that fails, suspect shorted Audio Jack and wipe completely and Odin Flash back to stock.
Click to expand...
Click to collapse
Thanks for the reply. Can I just wipe and flash the AOKP rom from recovery or do I have to specifically use Odin and specifically flash the stock rom?
krisater said:
Thanks for the reply. Can I just wipe and flash the AOKP rom from recovery or do I have to specifically use Odin and specifically flash the stock rom?
Click to expand...
Click to collapse
If you are trying to confirm shorted 3.5 mm jack then I'd go to Stock.
Perseus71 said:
If you are trying to confirm shorted 3.5 mm jack then I'd go to Stock.
Click to expand...
Click to collapse
If it is shorted, will flashing to stock fix it? I'm assuming no :[
Edit: I've heard that downgrading from 4.3.1 to 4.1, or a lower version, results in bricking, but I can't seem to find a stock 4.3.1 Galaxy S3 SGH-T999 rom...
I asked you to go to Back to Stock not to fix the problem, but to eliminate Rom and Kernel as potential suspects.
You will find Root66 of 4.3 in Root66 Thread or Docholiday's threads.
Perseus71 said:
I asked you to go to Back to Stock not to fix the problem, but to eliminate Rom and Kernel as potential suspects.
You will find Root66 of 4.3 in Root66 Thread or Docholiday's threads.
Click to expand...
Click to collapse
Ahh, okay. I have a question. Will I need to have wiped everything on my phone in CWM recovery before I flash the stock firmware using Odin?
No. Odin Flash does that for you. If you want to be double sure, then go ahead.
Perseus71 said:
No. Odin Flash does that for you. If you want to be double sure, then go ahead.
Click to expand...
Click to collapse
Thank you very much, that solved my problem of no sound, but now sound only plays through the right of headphones. I know it's not my headphones because I've tried different working ones with my phone to no avail. Plus, my headphones work fine with my laptop. Is there a fix, or is it a hardware problem?
I assume its the same MP3 that plays well on your laptop. In that case, I will say its hardware. Your 3.5 mm Audio jack is shorted. I had to get warranty replacement myself for that one.
Perseus71 said:
I assume its the same MP3 that plays well on your laptop. In that case, I will say its hardware. Your 3.5 mm Audio jack is shorted. I had to get warranty replacement myself for that one.
Click to expand...
Click to collapse
Flippin' hell. Thanks for your help though, at least I have SOME sound.
Perseus71 said:
I assume its the same MP3 that plays well on your laptop. In that case, I will say its hardware. Your 3.5 mm Audio jack is shorted. I had to get warranty replacement myself for that one.
Click to expand...
Click to collapse
Do you think buying one of these:
http://www.amazon.com/Samsung-SGH-T...&sr=1-1&keywords=T-MOBILE+SGH-T999+audio+jack
and replacing my broken audio jack with it would fix the problem? Plus, is it possible for an amateur like me to install this?
You could try. Doesn't seem too hard.
hey umm
You really need a news audio Jack
Weird thing started happening to my phone: when I plug in a pair of headphones (with or without mic) the phone does not detect that they are plugged in! Sound always comes out of the speakers. I've used apps like SoundAbout to force sound of the headset jack and it seems to do the trick. But as you know, this just spoofs the phone... it still thinks it's using the speakers so you'll lose mic capabilities.
The odd thing is that if I turn off my phone, plug in a pair of headphones, and then continue to turn my phone back on... once booted the phone will recognize that it has a pair of headphones plugged in and everything will be fine. Won't work when I unplug and try to replug. It only detects the headphones on boot.
1) Is there a solution to this?
2) Anyone know how the mechanics of this works? It seems like on boot it always tries to check if there are headphones... but something mechanical in the headphone jack triggers the check after boot (may mean I have a mechanical failure)?
3) Is there a way to force headphone mode, more so than what Soundabout does? It's a pain to lose the mic, I use it a lot.
Here are other pertinents:
- Running newest SkyDragon Lollipop GPE rom with Sense Firmware... don't think it's the rom because it worked just last week
- Only recently started happening, not sure what could have caused it
- Noticed the phone always tries to update HTC Service pack, I think I fixed that issue
- Have yet to try cleaning, need to get rubbing alcohol
Thanks for any help anyone can provide me.
headset problem too....
awkm said:
Weird thing started happening to my phone: when I plug in a pair of headphones (with or without mic) the phone does not detect that they are plugged in! Sound always comes out of the speakers. I've used apps like SoundAbout to force sound of the headset jack and it seems to do the trick. But as you know, this just spoofs the phone... it still thinks it's using the speakers so you'll lose mic capabilities.
The odd thing is that if I turn off my phone, plug in a pair of headphones, and then continue to turn my phone back on... once booted the phone will recognize that it has a pair of headphones plugged in and everything will be fine. Won't work when I unplug and try to replug. It only detects the headphones on boot.
1) Is there a solution to this?
2) Anyone know how the mechanics of this works? It seems like on boot it always tries to check if there are headphones... but something mechanical in the headphone jack triggers the check after boot (may mean I have a mechanical failure)?
3) Is there a way to force headphone mode, more so than what Soundabout does? It's a pain to lose the mic, I use it a lot.
Here are other pertinents:
- Running newest SkyDragon Lollipop GPE rom with Sense Firmware... don't think it's the rom because it worked just last week
- Only recently started happening, not sure what could have caused it
- Noticed the phone always tries to update HTC Service pack, I think I fixed that issue
- Have yet to try cleaning, need to get rubbing alcohol
Thanks for any help anyone can provide me.
Click to expand...
Click to collapse
I was experiencing the same problem and I know it is not the hardware since I was able to go back to 4.4.4. GPE and get music thru the headset like you. I tried to get an answer from other contributors but they think it is the jack. Anyway below is what I've wrote to get help.
Quote:
Originally Posted by seadersn
with removal i meant serial and imei in your post before my last post
Thank you for the feedback on personal data. (I appreciated it)
So I've did a factory reset and start flashing the "Stock Google Play Edition Rom LXR22C.H5" rom again.
Since I'm Rooted, this is the one I've flash: RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5_rooted
I've followed the instruction on #2031. Everything else work.... again only plugging in the headset into the jack, does switch music from speakers to headset.
As mentioned before I've upgrade my Stock AT&T HTC One (M8) to GPE 4.4.2 and automatically received all the updates OTA to get to 4.4.4 (Audio was working thru headset and/or speakers with no problems)
The only problem with 4.4.4 is that you don't have access to SD storage. (though I found a patch to update in the system, but haven't tried it)
I like the speed, simplicity of 5.0.1. That is why I keep on trying.
Also I tried changing the Kernel - using skydragon kernel (still same problem with audio). But when I used the kernel for 4.4.4 of GPE, the booting hung at HTC logo before it showed the dead android.
So I'm lost for option other than using an app to manual switch to headset from speaker....(bummer)
Anyway new ideas to proceed are appreciated.
gevans01 said:
I was experiencing the same problem and I know it is not the hardware since I was able to go back to 4.4.4. GPE and get music thru the headset like you. I tried to get an answer from other contributors but they think it is the jack. Anyway below is what I've wrote to get help.
Click to expand...
Click to collapse
Yeah that makes no sense why it would be hardware since you reverted back to 4.4.4 and it worked again.
The other reason why I don't think it's completely hardware is that, as I mentioned before, if you turn off the phone and then leave headphones plugged in while booting up the phone will recognize them. However, unplugging after boot will permanently lose headphone detection until you leave headphones plugged in during a fresh boot.
I'm thinking that either the software is not calling IsHeadphonePluggedIn (hypothetical) when the hardware is triggered (headphone plugged in), but always calls IsHeadphonePluggedIn when the phone boots. OR, the hardware trigger that tells the phone to call IsHeadphonePluggedIn is truly broken leaving cold boot the only method to detect headphones.
Maybe I'll try downgrading at some point but the weird thing is that I swore this was working without any major ROM updates... like just last week! For the time being, I'm using bluetooth.
awkm said:
Yeah that makes no sense why it would be hardware since you reverted back to 4.4.4 and it worked again.
The other reason why I don't think it's completely hardware is that, as I mentioned before, if you turn off the phone and then leave headphones plugged in while booting up the phone will recognize them. However, unplugging after boot will permanently lose headphone detection until you leave headphones plugged in during a fresh boot.
I'm thinking that either the software is not calling IsHeadphonePluggedIn (hypothetical) when the hardware is triggered (headphone plugged in), but always calls IsHeadphonePluggedIn when the phone boots. OR, the hardware trigger that tells the phone to call IsHeadphonePluggedIn is truly broken leaving cold boot the only method to detect headphones.
Maybe I'll try downgrading at some point but the weird thing is that I swore this was working without any major ROM updates... like just last week! For the time being, I'm using bluetooth.
Click to expand...
Click to collapse
Not sure if you've ever used Tasker but you should download that. They have a trigger for "headphone plugged in," and I'd be curious to see if it triggered when you plug in your headphones. You could just have it play a sound or something when it senses headphones. If that works, then it's whatever service handles that hardware interrupt, not the interrupt itself.
thebobmannh said:
Not sure if you've ever used Tasker but you should download that.
Click to expand...
Click to collapse
Yes, I have and use Tasker. In fact, I have a Profile for headphone or bluetooth headset detection. This is how I know the phone is definitively detecting my headphones on boot—the designated Tasker action triggers and I get the Profile highlighted as active.
When I unplug the headphones, Tasker responds accordingly and runs the exist task and the profile is no longer highlighted. When I try to replug, Tasker doesn't do anything. Headphones not detected.
Another tidbit I've discovered:
- Safe mode doesn't help with headphone detection. In fact, there is none even after cold boots. Tried safe mode to isolate any 3rd party apps that might be causing issues.
- To clarify about reboots. The phone needs to be shutdown completely and turned on while the headphones are plugged in to detect. Issuing a reboot via APM doesn't really work, I don't think.
Straaaange.
awkm said:
Another tidbit I've discovered:
- Safe mode doesn't help with headphone detection. In fact, there is none even after cold boots. Tried safe mode to isolate any 3rd party apps that might be causing issues.
- To clarify about reboots. The phone needs to be shutdown completely and turned on while the headphones are plugged in to detect. Issuing a reboot via APM doesn't really work, I don't think.
Straaaange.
Click to expand...
Click to collapse
I'm checking in again to see if anyone solved the headphone detection issue with 5.0.1. As you mentioned about powering down the phone (and not reboot) does detect the headphone, but after you unplug the headphone it revert back to the speakers. No change when you reinsert the jack for the headphone. I've tried all custom roms that uses 5.0.1 and none works with the headphone. Right now I'm still running GPE 4.4.4 on my AT&T One M8. I really like the features of 5.0.1 but not interested in a dual approach to listen to music in my headphone. Let me know if anyone find a new technique that will work with our M8. (I don't think anyone have been able to get the AT&T version of M8 to work with the headphone on 5.0.1.....If I'm wrong please share......)
gevans01 said:
I've tried all custom roms that uses 5.0.1 and none works with the headphone. Right now I'm still running GPE 4.4.4 on my AT&T One M8.
Click to expand...
Click to collapse
I did come across a solution, but it may be unique to me. It's entirely hardware related. Just inside the headphone jack, there is a small connector. I used a pin to pry it out slightly. After doing this, plugging headphones in works like normal. That outer most pin must be the trigger that tells the phone to check if there is a headphone connected.
However, as I mentioned, even without this pin being activated I can still get the phone to detect the headphone buy just cold starting the phone. It may be a difference in how 4.4.4 and 5.0.1 uses the hardware on the phone. I have no clue, it's annoying nonetheless.
So give that a shot!
awkm said:
I did come across a solution, but it may be unique to me. It's entirely hardware related. Just inside the headphone jack, there is a small connector. I used a pin to pry it out slightly. After doing this, plugging headphones in works like normal. That outer most pin must be the trigger that tells the phone to check if there is a headphone connected.
However, as I mentioned, even without this pin being activated I can still get the phone to detect the headphone buy just cold starting the phone. It may be a difference in how 4.4.4 and 5.0.1 uses the hardware on the phone. I have no clue, it's annoying nonetheless.
So give that a shot!
Click to expand...
Click to collapse
Interesting.....Did you open your M8 to pry the pin? I tried looking inside the jack but can't see any pin. Plus I looked at the disassembly video on you-tude for the M8 and said, no way (smile). So I'm willing to try but I can't see the pin you're talking about. Is there a diagram you can point me too? Or provide more information. Very much appreciated...
gevans01 said:
Did you open your M8 to pry the pin?
Click to expand...
Click to collapse
Haha no way I'd open the phone. If you look into the headphone jack with the screen facing up, the pin should be near the 1'o'clock position. It's hard to see so use a flashlight or something. It's very close to the opening, 2-3mm deep only.
Maybe you need to change the whole headphone jack. There's a DIY video on youtube for it. Just give it a try if there isn't any other solution.
awkm said:
Haha no way I'd open the phone. If you look into the headphone jack with the screen facing up, the pin should be near the 1'o'clock position. It's hard to see so use a flashlight or something. It's very close to the opening, 2-3mm deep only.
Click to expand...
Click to collapse
Thanks for the tip. I will try it and give you feedback.
---------- Post added at 03:42 AM ---------- Previous post was at 03:26 AM ----------
awkm said:
Haha no way I'd open the phone. If you look into the headphone jack with the screen facing up, the pin should be near the 1'o'clock position. It's hard to see so use a flashlight or something. It's very close to the opening, 2-3mm deep only.
Click to expand...
Click to collapse
Thanks for the tip. I will try it and give you an update.
gevans01 said:
Thanks for the tip. I will try it and give you feedback.
---------- Post added at 03:42 AM ---------- Previous post was at 03:26 AM ----------
Thanks for the tip. I will try it and give you an update.
Click to expand...
Click to collapse
Well I've reinstalled 5.0.1 and tried digging into the jack, trying to move the 1pm pin just a few centimeters....well I finally gave up. I was not able to make it work and I got concerned that I would damage the jack, which will cost me a fortune in repair bills. (smile)
Thank you for recommendation....I guess I will use the soundabout app until AT&T release the one for our M8.
gevans01 said:
Well I've reinstalled 5.0.1 and tried digging into the jack, trying to move the 1pm pin just a few centimeters....well I finally gave up. I was not able to make it work and I got concerned that I would damage the jack, which will cost me a fortune in repair bills. (smile)
Thank you for recommendation....I guess I will use the soundabout app until AT&T release the one for our M8.
Click to expand...
Click to collapse
Try to wipe the data...its worked for me even I have tat issue 3 weeks before ...after wipe everything going smoothly
Sent from my HTC One_M8 using XDA Free mobile app
Suresh9488 said:
Try to wipe the data...its worked for me even I have tat issue 3 weeks before ...after wipe everything going smoothly0\
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
\
Can you explain in more detail when you say "wipe the data".....Are you referring, go into recovery and do a data wipe? or go into an app (which app) and clear the cache or something?
If you can give me the step by step procedures I would appreciate it.
Also did you try this on a "AT&T HTC One M8" versus a HTC One M8? because I'm beginning to notice that there is a very slight difference between the two.
Thanks,
gevans01 said:
\
Can you explain in more detail when you say "wipe the data".....Are you referring, go into recovery and do a data wipe? or go into an app (which app) and clear the cache or something?
If you can give me the step by step procedures I would appreciate it.
Also did you try this on a "AT&T HTC One M8" versus a HTC One M8? because I'm beginning to notice that there is a very slight difference between the two.
Thanks,
Click to expand...
Click to collapse
Go to setting enter into backup and reset option and do a full reset n try I am sure it will work gud luck
Sent from my HTC One_M8 using XDA Free mobile app
No audio thru headphone after installing 5.0 (problem solved!)
Suresh9488 said:
Go to setting enter into backup and reset option and do a full reset n try I am sure it will work gud luck
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the advise....
Geee.......I've been using these Klipsch headphones for all my mobile phones and it has been working on 4.2 to 4.4.4. Once I've upgraded the rom to 5.0.1 audio stop going through the klipsch headphone. Going back to 4.4.4 (lucky I made a Nand backup) it started working again. So I tried several different methods from several people and nothing worked.
Since I tried, what you said, resetting the phone....and of course it still didn't work with the Klipsch headphone.
dah....are you seeing the pattern. Finally the light came on and I decided at the last minute, before restoring 4.4.4 rom, was to find my old Bose headphones and try it.....Wow. It worked but I had to try plugging it in and out to see if it continued working.....AND...yes it continue to play music through the Bose headphone. (tried the Klipsch again and had the same old - not working)
The only difference between the Bose and the Klipsch is that the Klipsch has three rings on the jack. The third one is used to control the player....i.e. skip/stop/pause. The Bose has only two rings on the jack....(just music input)
For others that are experiencing the "No Music thru the headphones" when you install 5.0......check the jack for two vs three rings.
Thanks again for the insight.... (problem solved - closed case)
gevans01 said:
Thanks for the advise....
Geee.......I've been using these Klipsch headphones for all my mobile phones and it has been working on 4.2 to 4.4.4. Once I've upgraded the rom to 5.0.1 audio stop going through the klipsch headphone. Going back to 4.4.4 (lucky I made a Nand backup) it started working again. So I tried several different methods from several people and nothing worked.
Since I tried, what you said, resetting the phone....and of course it still didn't work with the Klipsch headphone.
dah....are you seeing the pattern. Finally the light came on and I decided at the last minute, before restoring 4.4.4 rom, was to find my old Bose headphones and try it.....Wow. It worked but I had to try plugging it in and out to see if it continued working.....AND...yes it continue to play music through the Bose headphone. (tried the Klipsch again and had the same old - not working)
The only difference between the Bose and the Klipsch is that the Klipsch has three rings on the jack. The third one is used to control the player....i.e. skip/stop/pause. The Bose has only two rings on the jack....(just music input)
For others that are experiencing the "No Music thru the headphones" when you install 5.0......check the jack for two vs three rings.
Thanks again for the insight.... (problem solved - closed case)
Click to expand...
Click to collapse
I am very happy for you....
Sent from my HTC One_M8 using XDA Free mobile app
gevans01 said:
Thanks for the advise....
Geee.......I've been using these Klipsch headphones for all my mobile phones and it has been working on 4.2 to 4.4.4. Once I've upgraded the rom to 5.0.1 audio stop going through the klipsch headphone. Going back to 4.4.4 (lucky I made a Nand backup) it started working again. So I tried several different methods from several people and nothing worked.
Since I tried, what you said, resetting the phone....and of course it still didn't work with the Klipsch headphone.
dah....are you seeing the pattern. Finally the light came on and I decided at the last minute, before restoring 4.4.4 rom, was to find my old Bose headphones and try it.....Wow. It worked but I had to try plugging it in and out to see if it continued working.....AND...yes it continue to play music through the Bose headphone. (tried the Klipsch again and had the same old - not working)
The only difference between the Bose and the Klipsch is that the Klipsch has three rings on the jack. The third one is used to control the player....i.e. skip/stop/pause. The Bose has only two rings on the jack....(just music input)
For others that are experiencing the "No Music thru the headphones" when you install 5.0......check the jack for two vs three rings.
Thanks again for the insight.... (problem solved - closed case)
Click to expand...
Click to collapse
If you do want to use your klipsch headphones, however, you can just use a standard 3.5mm extension cord in the middle. I've used this trick in the past with an old Nokia and my htc earphones
Sent from my GT-S5830 using Tapatalk 2
n1234d said:
If you do want to use your klipsch headphones, however, you can just use a standard 3.5mm extension cord in the middle. I've used this trick in the past with an old Nokia and my htc earphones
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Great advise...it is cheaper to use an extension then to buy another headphone...thank you.:good:
Hi guys. Recently I tried all of CM12 Based ROM, but whenever I put my earphone in, all audio always play through speakers. Is that only me or you guys have the same problem? How can I fix that?
Thanks in advance. Sorry for bad english.
sendalicious said:
Hi guys. Recently I tried all of CM12 Based ROM, but whenever I put my earphone in, all audio always play through speakers. Is that only me or you guys have the same problem? How can I fix that?
Thanks in advance. Sorry for bad english.
Click to expand...
Click to collapse
Never got such problem...btw check your earphone with other phone or check the earphone jack by using some other earphones...btw are you using mi pistons?
sendalicious said:
Hi guys. Recently I tried all of CM12 Based ROM, but whenever I put my earphone in, all audio always play through speakers. Is that only me or you guys have the same problem? How can I fix that?
Click to expand...
Click to collapse
I observed a similar problem: Piston 2 (gold) Earphones are working fine every time they are plugged in. My Piston 3 are working only on one out of ten attempts.
I am using CM12.1 R4. No difference between Stock-Kernel or latest Xcelerate-Kernel. The behavier of both kernels is identical.
unkown rockstar said:
Never got such problem...btw check your earphone with other phone or check the earphone jack by using some other earphones...btw are you using mi pistons?
Click to expand...
Click to collapse
Tried with another earphone and face the same result. And yes, I'm using mi pistons 2 (gold) now.
Tim24 said:
I observed a similar problem: Piston 2 (gold) Earphones are working fine every time they are plugged in. My Piston 3 are working only on one out of ten attempts.
I am using CM12.1 R4. No difference between Stock-Kernel or latest Xcelerate-Kernel. The behavier of both kernels is identical.
Click to expand...
Click to collapse
I tried to downgrade to CM11 R11, everything works fine. but I face the same problem when I tried CM11 R26 or CM12.1.
FYI, recently I change my Redmi 1s' daughterboard on service center because my microUSB port doesnt works well. Is changing my daughterboard causing audio jack doesnt works well?
thanks in advance.
Exactly the same problem faced by me...
The earphone works with cm11 older builds...but when I flash cm11r26 or any lollipop based ROM...it is not working...
Someone help...pls...
XK1RA said:
Exactly the same problem faced by me...
The earphone works with cm11 older builds...but when I flash cm11r26 or any lollipop based ROM...it is not working...
Someone help...pls...
Click to expand...
Click to collapse
If you are using cm12 official build then you can file a bug in their bug tracker.
Or else if you have an unofficial build of CM12 then go to the thread and ask there.
I think this is the only way that you have to rely on.
Sent from my Moto G using XDA Free mobile app
Im also having the same problem in cm 12.1 xlerate kernel with piston 3.0. And other os n other phones are ok with this earphone
Sent from my HM 1SW using XDA Free mobile app
softysam said:
Im also having the same problem in cm 12.1 xlerate kernel with piston 3.0. And other os n other phones are ok with this earphone
Sent from my HM 1SW using XDA Free mobile app
Click to expand...
Click to collapse
Hello, I have same problem with cm12.1 (unofficial) and piston 3.
In fact I have the problem with several headsets with mic and volume buttons and so.
Headset with mic and without buttons is working fine.
Enviado desde mi HM 1SW mediante Tapatalk
Try downloading an app called SoundAbout from the play store. I had the same problem with my pistons 3 but now the headphones and mic are recognized but not the volume buttons. Good enough.
Even im facing the same issue with cm12.1.
With miui they r working fne.
Bt i found a workaround. This will help u to connect in the first attempt only.
plug them into ur ears (not the jack).
see 3.5mm jack has 2 or 3 marks on it.
So Try to connect it one mark by one. For me it connects at 2nd mark. I think for u too.
Now u will hear a small jerk sound coming from earbuds. If u dont...try to connect it rotationally. Once u hear the sound connect it properly.
Thats it. U r successfully connected ur earphones.
Now njy ur music. :victory:
Sry for my bad eng
Guys,I use too pistons 3 and @Luffy.d explained me it's kernel source code lack,it is a "bug" of the source code released by Xiaomi,only with a proper source code (fixed or even new) this bug could be fixed ,we weren't having this problem on old cm11 builds because they were using the same closed miui kernel source code,until a new redmi 1s kernel source code release by Xiaomi we'll have this problem,so until that moment do like @satti8893 explained
There was a small workaround. It was there in CM11 thread. Try connecting headphones slowly till u hear a static sound. Then push it in. It might work. This worked for me and played only through earphones.
http://forum.xda-developers.com/showthread.php?p=59121707
The last cm 12.1 changelog says "Kernel updates for led notification and headphone buttons (thanks @luffyxda)". Does it mean our Piston v3 headphones will work with all their buttons functional? Or at least that the development is on the way to get it.
Haettenschweiler said:
The last cm 12.1 changelog says "Kernel updates for led notification and headphone buttons (thanks @luffyxda)". Does it mean our Piston v3 headphones will work with all their buttons functional? Or at least that the development is on the way to get it.
Click to expand...
Click to collapse
Yeah mi pistons works now on on cm12 Armani devs build...and remaining all 5.1.1 roms doesn't work...please let me know if any other rom works with mi pistons....
I have redmi 1s mobile, when I connects earphones to mobile, the sound comes from only right side earbud, what's the cause to the problem
Please give me any suggestions
satti8893 said:
Even im facing the same issue with cm12.1.
With miui they r working fne.
Bt i found a workaround. This will help u to connect in the first attempt only.
plug them into ur ears (not the jack).
see 3.5mm jack has 2 or 3 marks on it.
So Try to connect it one mark by one. For me it connects at 2nd mark. I think for u too.
Now u will hear a small jerk sound coming from earbuds. If u dont...try to connect it rotationally. Once u hear the sound connect it properly.
Thats it. U r successfully connected ur earphones.
Now njy ur music. :victory:
Sry for my bad eng
Click to expand...
Click to collapse
it works :good:, i dont have problem with piston 2, but this piston 3 need some care , so the point is plug it gently
https://play.google.com/store/apps/details?id=com.leftrightstereo.nejc.leftrightstereo
I tried that app to confirm I have no stereo sound. It only produces mono sound but both speakers work.
I also tried 2 pairs of headphones. Both play sounds in single channel sound through both sides. So I can say the phone is faulty. I noticed the problem today. I am sure this didn't happen yesterday.
How do I go about it? I just want to try something before needing to hard reset and wipe the phone data
I haven't installed new apps in the Last few days apart from the one above.
It's a 20X AL00 original Chinese rom 9.1 patch 120 so it's on the latest update.
I need ideas to try something. I have reset the phone already.
Did you enable mono audio in Settings>Smart Assistance>Accessibility ?
Syzygium said:
Did you enable mono audio in Settings>Smart Assistance>Accessibility ?
Click to expand...
Click to collapse
Thank you bro. That was the reason. The strange thing is I haven't enabled it myself so I don't know how this happened.
Hello everyone, hope all is well today. Here is my issue, anytime I flash a custom rom to my Motorola One Action (XT2013-4) everything will work fine, except for my Bluetooth. While, it will connect, when trying to play music via Bluetooth via my portable Bluetooth speaker and my Samsung Galaxy Buds + earbuds, the only sound I will get is either a god awful static like noise or silence and the track will act like it is buffering within the Pandora app. I've tried a couple Magisk modules with no luck. I am usually pretty good at figuring stuff like this out, but this one has me stumped, which causes me to get annoyed and revert back to the stock rom with root, but I'd really like to upgrade to a version of 11.
If anyone can help me out with a fix, I'd be forever grateful,
Thank yall and have a great day.
Hi h2os?
???
On hydrogen os rom?
regnermax8 said:
On hydrogen os rom?
Click to expand...
Click to collapse
Happens on any rom I try that isn't stock rom
Try changing the BT options on dev options, never happened to me but it may help.
Tried that as well, with no luck