Related
HTC DESIRE SV FORUM:
This forum has been created for HTC Desire SV mobile users
This will help you in rooting , unroooting , unlocking boot loader , installing stock,custom rom , swapping memory , etc with htc desire sv
Unlocking boot loader and Rooting:
Post #2
Custom Rom:
Post #3
Common Questions and their answers:
Post #4
Getting back to mobile purchased:
Installing stock rom
Re-Swapping memory
Delete Superuser app
Re-lock bootloader
Post #5
Updates:
Swapping Int and Ext_sd
Bootloader unlock tool
Super SU update and pro version
HTC desir svTweaks
Recovery.img files and google drive
Installing an app as system app
Post #6
Modifications and embellishments:
Post #7
PRECAUTION (must read):
Post #8
Best Of Best:
Aroma File Manager(To use in recovery menu)
Aroma Font Manager(To use in recovery menu)
Post #9
Themes:
Post #15
FULL WIPE:
[includes: wipe data / factory reset + wipe cache partition + format / data + format cache + format system + wipe dalvik-cache (+ wipe battery stats)]
Post #52
Unlocking bootloader and Rooting
Unlocking BOOTLOADER
Things to Remember
o This guide is only for the HTC DESIRE SV. Do not attempt the following steps on any other device.
o The warranty will be voided after the unlock.
o Make sure your battery is charged to at least 80%.
o If you are unsure about any step, ask us in the comment section before proceeding further.
Thing to be Done
o All the files will be wiped after the unlock so take backup of all your important data.
o Enable USB debugging from the Developer options.
o Download and install the HTC Sync Manager from this link.
o Download Fastboot zip file from this link and extract the contents into a folder namedFastboot.
o Disable antivirus software on your system to avoid unnecessary interference.
Step-by-step Guide to Unlock HTC DESIRE SV Bootloader
o Go to the website www.htcdev.com and register yourself. Make sure to verify the email to complete the registration process.
o Login to the htcdev website and then go to the Unlock Bootloader page.
o Click the drop down devices list Under supported devices and select the option ‘All Other Supported Models‘. (select htc desire because htc desire sv will be not in the list)
o Click on ‘Begin Unlock Bootloader’ and select Yes on the confirmation screen.
o Acknowledge messages on the Legal Terms and click on ‘Proceed to Unlock Instructions’.
o The next page with unlocking bootloader instructions will give you 4 steps to follow: Disconnect mobile from the PC if connected and then switch off the device. Then pressVolume Down button and Power button to start the device in Bootloader mode. Once it’s in Bootloader screen, highlight Fastboot option and press the Power button. Then connect your HTC DESIRE SV to PC via USB cable.
o Click on Proceed to step 5. But it’s not required to follow the steps mentioned in the second page of htcdev site. Instead you go to the Fastboot folder which we have extracted earlier and hold the Shift key and at the same time right click on the free space. Select the option ‘Open command window here’.
o Windows command window will appear like ‘..\Fastboot>’. Now you need to enter the following command in the command line fastboot devices (This command will tell you whether your device is detected by your computer or not. If your device shows you can go ahead with the next step. If the device is not detected the command screen will not show any information and in this case you have to re-install the HTC Sync Manager and reboot your PC. Then redo the tutorial from the beginning.
o Keep open the command window. Then go to the third page of instruction in htcdev by clicking on ‘Proceed to Step 8‘ button.
o Follow the steps mentioned in the third page of htcdev site (from step 8 to step 10). When all the steps are done, click on Submit button.
o If all the steps are done properly you will get a message ‘Token Submitted Successfully!’ and the Unlock Key information is emailed to you.
o Open the email from HTC and download the attached file named ‘Unlock_code.bin’.
o Once the download is done copy the ‘Unlock_code.bin’ file to Fastboot folder.
o Now go back to the command window and the following command: fasboot flash unlocktoken Unlock_code.bin
o Now the HTC DESIRE SV will get a message to Unlock bootloader. Press Volume up and select YES, then press Power button to confirm the action.
o Your HTC DESIRE SV will now restart and ask to complete the factory reset process. You can now disconnect your device from the PC.
That’s all! You have successfully Unlocked the Bootloader of your HTC DESIRE SV. Now you can root and install Custom ROMs on your device without any issues.
ROOTING HTC DESIRE SV:
1.)Dowload android.rar from link
2.)download superuser.zip from link
3.)Rooting:
[steps:]
*switch off your mobile
*click volume down and power button simultaneously to enter boot menu
*click fastboot
*connect your device to pc via usb
*it will be appearing fastboot usb in the mobile
*extract downloaded file to c:\
*copy super user.zip to your external sd card
*click winkey+r and type cmd to enter command prompt
*type cd\
*type cd android to enter into c:\android where the files are present
*type fastboot flash recovery recovery.img
*you will get success notification in command prompt
*type fastboot reboot-bootloader
*click recovery
*wait for few minutes it wil show entering recovery... and it wil enter black screen after 2 minutes it wil enter recovery
*click install zip via sd card
*select zip file from external sd
*click yes to install
*congratulation your HTC DESIRE SV mobile is rooted now
Custom rom(htc desire sv)
INSTALLING CUSTOM ROM:
1. Fill the firmware to the memory card. (No need to unpack)
2. Turn off the phone. We take out the battery and insert back. Turn it pinching button VolDown + Power.
3.Select Fastboot, select Recovery, get into the menu CWM Recovery.
4.Use volume keys to select backup and restore and select backup. Wait for 5-10 minutes. CWM Recovery creates a backup of your system in the card catalog type clockworkmod / backup / date backup. Rename this directory is not recommended! To organize the directory must to 1GB of free space. If necessary, it can be transferred to and stored on a computer folder with preservation of architecture. Then, when you install custom firmware failed or that fails, you will always be able to restore the original state of the system: backup and restore → restore → select → confirm by Power button.
5. After a successful backup system, go to the firmware kernel.
From the archive IMG Galickijj sews kernel (boot.img) is mandatory. (manual firmware kernel header)
After flashing the kernel go to Fastboot, select Recovery, get into the menu CWM Recovery.
proceed to the cleaning system (Wipe, Wipe), the cache from the old firmware.
choose in CWM Recovery point to:
- wipe Data / factory reset
Advanced / wipe dalvik cache
Go back to the main menu CWM Recovery.
6. Go directly to the installation of the firmware. To do this, select the menu item CWM Recovery
- install ZIP from sdcard → Choose ZIP from sdcard
- choose a file
- confirm by Power button
After installing CWM Recovery will show you the message
Install from sdcard complete.
Doing a reboot.
Be patient, the first load system is long, wait about 5-10 minutes until the system is booted.
custom rom list:
Mod Edit: Links removed for warez:
6. Do not post warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit any member to request, promote or describe ways in which Warez, cracks, serial codes or other means of avoiding payment, can be obtained. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community
Common Questions and their answers
Q1.
WiFi not working after installing custom Rom :
#switch off you mobile
#get into fastboot by pressing power and volume down button
#go to command prompt and navigate to c:\android where sdk files downloaded from post #1 is present
#copy boot.img from custom rom installed to c:\android
#in cmd type fastboot flash boot boot.img
#after getting success , reboot your phone
$##$ Your wifi will be working now
Q2.
How to s-off HTC Desire sv?
Many people were trying to find how to s-off and if you try by another other method it's may lead your device bricking.
Q3.
When I delete a file in system/app or some root files it deleted and after reboot it's there?
Well, then the only conclusion that a temporary root access still can live, but without S-off you cant make sense to remove the application so as to restore...
Q4.
Is Jellbean rom available for HTC desire sv or how to upgrade to jelly bean?
Jelly bean rom is currently un available and many forum developers were developing rom as rom porting fails with htc desire sv it will take some time .....
Q5.
In ClockworkMod recovery_menu my screen is slighly left when I press down and it comes back to normal when I press the down button again .... Is the problem on my mobile?
If you mean when you click on the menu items that shift...It is normal feature of the ClockworkMod recovery. No worries
Getting back to mobile purchsed
This will help you in getting back your mobile which you have purchased.
The steps involved here are:
Installing stock rom without root permissions
(or)
To delete SuperUser app and
To re-swap memory(If you haven't installed any custom rom)
(and)
Re-locking bootloader
Installing stock rom without root permissions:
If u have stock rom of your mobile backed up anyway it won't be useful because it's rooted.
So download stock rom from here:
LINK1
LINK2
Refer Post #48 for stock ROM (2 Versions)
Rom info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
copy to your ext_sd card and flash it via recovery
Re-Locking bootloader:
put your phone in bootloader mode:
Switch OFF your phone.
Press and hold “Volume down + Power button” together until your phone boots into bootloader mode.
Select Fastboot using the Power button.
Use the Volume buttons to go up & down and Power button to select the highlighted option in the bootloader mode.
Connect your phone to the PC with a USB Cable.
Open the fastboot folder c:\android
Then open a Command prompt window inside the fastboot folder.
To do this → “Shift + Right Click” on any empty white space inside the folder and select the ‘Open command window here’.
Type the following in the command prompt window:
fastboot devices
This is to ensure that your device is detected, if nothing appears on screen with this command, then it means you don’t have the proper drivers installed on your PC. And if that’s the case you should download and install/re-install the HTC Sync software given in Step 1.1
Now type the following command to re-lock your HTC One X bootloader
fastboot oem lock
That’s all. Your phone’s bootloader is now re-locked and it’ll reboot automatically
To confirm, boot into bootloader mode and you’ll see “RELOCKED” written with a pink highlight at the top of the screen
To re-swap memory(int_sd and ext_sd)
download this file: Link
copy to ext_sd card
Flash via recovery
To delete SuperUser app(system):
Downlaod this file: Link
copy to ext_sd card
Flash via recovery
Updates
Swapping Internal_SD and Ext_sd in HTC DESIRE SV
Download this file and place it on your external card(keep a back up of your sd and ext_sd as the contents wil be deleted fully):
Link
Steps:
1.)go into recovery mode
2.)click select zip from sd card and browse the file
3.)click yes to install
4.)It will take few seconds
5.)go back and click reboot now.
6.)install all apps that you have backed up
7.)now you have successfully swapped ext_sd and int_sd
Note:
Don't rename the file you have downloaded or don't edit the contents..
HTC Boot loader unlock tool:
Link to download
follow onscreen instructions to unlock boot loader
Super Su Update Pro:
Link :
6. Do not post warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit any member to request, promote or describe ways in which Warez, cracks, serial codes or other means of avoiding payment, can be obtained. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community
HTC DESIRE SV google drive(my files):
Link
Recovery.img files:
Here comes recovery.img files working on HTC desire sv.The stock version is named as stock_recovery and other two clockword mod recvoery versions working on desire sv are 6.0.2.8(touch version and keys version) and 6.0.3.2(touch version)
Links for downloading:
download.........
HTC Desire sv tweaks:
This helps in improving our performance, hardware acceleration, the search interval Wi-Fi networks, saving battery power, a smoother interface, improved the quality of photo, audio and video recording camera, etc.
"VSV_Tweaks" tweaks build.prop (Tweaking )
Installation :Before installing make backup! 1. copy the file to memory card 2. reboot into Recovery 3. In the Recovery menu, select the item advanced -> wipe dalvik cache 4. Select an option in Recovery - install zip from sd card 5. Specify the path to the file VSV_Tweaks 6. Reboot your phone, when installation is complete.
Who does not like to install the patch build.prop (stock) or restore the backup.
Links:
VSV_tweaks.zip
build.prop.zip
Installing an app as system app:
1. Download the archive.
2. Open it (I used winrar.)
3. Add the desired installation file (*. Apk) in the folder system / app in the archive and save it.
4. * do not touch anything..
5. Copy the zip to our microSD card .
5. Run the phone to recovery
6. Select install zip from sdcard, then choose zip from sdcard, choose zip and clock yes to install.
7. select go back(after successful installation)
8. select Reboot System now to reboot your phone
Modifications and embellishments for HTC Desire SV T326e
This post contains:
Wallpapers
Icons
Themes
Fashion dialer
Fashion keyboard
Wallpapers:
Sense 5 wall papers
Themes:
Classic theme:
Link
Sense 5 Theme
Link
Themes continued in Post #15
will be updated soon
Precaution
PRECAUTION for Brick(HTC DESIRE SV)
This is really a necessary post which will help you how to prevent yourself from your mobile getting bricked
Mostly many people have told that volume down and power button pressing to enter recovery made my mobile brick and this is a main cause for getting bricked, because many people will press volume up/down and power sometimes it may make your hardware fail.
so to prevent this we have used techniques to get your mobile to fastboot without using buttons,just connect mobile via PC via USB on any mode(charge only,media storage)
Download this file
Link to download
and
Run fastboot.bat to enter fastboot
Run stock_recovery.bat to install stock recovery.img
Run cwm_recovery.bat to install cwm_recovery.img ( U can also replace cwm_recovery.img by any version supported for the device)
These files should be usually placed in c:\android as all the procedures are following steps with that.
BACK UP ROM:
Even backing up rom is necessary thing. a copy of backed_up rom should be in PC
If something went bad with installing custom rom , you can easily roll back to previous rom which you have backed up
Best of Best
Now this Post if for Aroma File manager and Aroma Font manager:
What is Aroma file manager:
Android Recovery was powerful system. But it was pain when it come to managing your file system
But now AROMA File manager is available for everyone to do this common tasks.
So you can access files through a file manager in recovery menu called Aroma File manager
What is Aroma Font manager:
It's hard to Change fonts on a S-ON device as the files replaces in system will not be permanent.
This made easier by Aroma Font Installer
Fonts Available:
- Android Logo
- Gingerbread Stock
- MeeGo
- Nokia Pure View Font
- Roboto(Stock)
- Ubuntu
- Windows Phone 7
- Sony Xperia S
How to Use:
1. Download and copy the file in your SDcard.
2. Boot on Recovery.
2. Choose install zip from SDCARD.
Download:
Aroma_Font_Manager
Aroma_File_Manager
:good::good::good::good::good:
last post reserving so
Download Speed
prasath kp said:
INSTALLING CUSTOM ROM:
1. Fill the firmware to the memory card. (No need to unpack)
2. Turn off the phone. We take out the battery and insert back. Turn it pinching button VolDown + Power.
3.Select Fastboot, select Recovery, get into the menu CWM Recovery.
4.Use volume keys to select backup and restore and select backup. Wait for 5-10 minutes. CWM Recovery creates a backup of your system in the card catalog type clockworkmod / backup / date backup. Rename this directory is not recommended! To organize the directory must to 1GB of free space. If necessary, it can be transferred to and stored on a computer folder with preservation of architecture. Then, when you install custom firmware failed or that fails, you will always be able to restore the original state of the system: backup and restore → restore → select → confirm by Power button.
5. After a successful backup system, go to the firmware kernel.
From the archive IMG Galickijj sews kernel (boot.img) is mandatory. (manual firmware kernel header)
After flashing the kernel go to Fastboot, select Recovery, get into the menu CWM Recovery.
proceed to the cleaning system (Wipe, Wipe), the cache from the old firmware.
choose in CWM Recovery point to:
- wipe Data / factory reset
Advanced / wipe dalvik cache
Go back to the main menu CWM Recovery.
6. Go directly to the installation of the firmware. To do this, select the menu item CWM Recovery
- install ZIP from sdcard → Choose ZIP from sdcard
- choose a file
- confirm by Power button
After installing CWM Recovery will show you the message
Install from sdcard complete.
Doing a reboot.
Be patient, the first load system is long, wait about 5-10 minutes until the system is booted.
custom rom list:
1.) custom firmware IMG Galickijj for HTC Desire SV based on 1.07.401.6 ICS 4.0.4 :
Link to download:
custom firmware IMG Galickijj for HTC Desire SV based on 1.07.401.6 ICS 4.0.4 HTC Sense 4.1
Features:
Root core
applications Root
Deodexed & Zipaligned
Memory optimization it right now
(with the ability to move applications to the SD
when connected to a PC otkryvaetsya only SD)
Support Init.d scripts
Ramdisk
EXT4
Zipalign mount system partitions
improved picture quality and 100%
GPU accelerated
reduction "lags" when dialing to improve responsiveness of the screen
improved battery saving
Android debugging icon is removed to improve the video quality of some errors in applications
improve the speed of the Internet
to improve reading speed SD
GPS is optimized
SystemUI Mod
Sound lock / unlock
Advanced Topics
Fixed calculator
changed Boot animation
You can put embellishment
Ad Blocking applications
, etc.
Applications(extra):
QuickPanel
Quick Settings Panel
EsFileExplorer
EsTaskManager
SuperSU
Adobe Flash Player
BusyBox Pro
2.)Firmware FULL DEODEX for HTC Desire SV cid HTC_A48
Link To download:
Firmware FULL DEODEX for HTC Desire SV cid HTC_A48
Features:
* brushed rom
* full deodex
* installed necessary tools
* root - system patch
* LiDRoiD Quick Access Toolbar - system patch
* battery in 1% increments - system patch
* pre installed stock + new themes
* memory are reversed, and the built-in SD - System Patch
* patch calculator
Applications(extra):
SuperUser
TotalCommander
TimeSyncPro
RootExplorer
Calculator - (human)
SambaFilesharing
QuickSetting panel LiDRoiD
***** patch system means that it in no way can affect your resources, i.e guzzle battery, etc. etc.
Click to expand...
Click to collapse
The download speed is limited on that site. Please upload it to google drive or yandex disk.
karaman_deniz said:
The download speed is limited on that site. Please upload it to google drive or yandex disk.
Click to expand...
Click to collapse
google drive link updated for 2nd rom but for 1st rom it's uploded by another persona nd i don't have google drive link. i'm sorry
can the themes b installed on any htc non rooted phone?
---------- Post added at 09:32 AM ---------- Previous post was at 09:23 AM ----------
can you upload more themes ..i am looking for these themes forever!! Thank you so very much
getting back to mobile purchased
can u pls tell me the procedure for restoring...I extracted the stock rom into external sd..after that in recovery mode I choose restore and install...but it is nt working..pls help...
Here are some themes for sense 4.1(no root needed)
Yellow theme:
Link to download...
Matte theme:
Link to download...
Retro theme
Link to download
Tron theme
Link to download
Beats by dre theme
Link to download
Holiday theme
Link to download
All credits go to the developer of the themes..I am just posting theme..
kulveer007 said:
can u pls tell me the procedure for restoring...I extracted the stock rom into external sd..after that in recovery mode I choose restore and install...but it is nt working..pls help...
Click to expand...
Click to collapse
step1:
Download and Copy the file to external sd card...
step2:
There are two types of files available
if the file is .zip select install zip from sd vard and browse the .zip file and click yes to install
if the file is in folder (system. tar,boot.img,data.tar,etc...) you have to copy the folder(name wil be date and time) to clockworkmod\backup\ and go to recovery and choose restore/back up and click restore and choose the folder
Hit thanks if i helped you
zerohunk said:
can the themes b installed on any htc non rooted phone?
---------- Post added at 09:32 AM ---------- Previous post was at 09:23 AM ----------
can you upload more themes ..i am looking for these themes forever!! Thank you so very much
Click to expand...
Click to collapse
yeah uploaded more and even more themes will be uploaded soon
Cant restore
bro i download CWM Recovery_Stock(root)_HTC_Desire_SV.rar...and copy folder (with date and time) in cloakwrk/backup...in recovery i choose backup and restore then restore...then i selected the folder...after a minute it is showin cant open /cache/recovery/last_log...
thank you very much for all your documents which is translated from russian forum and your devolopment. you are the only one devoloper who works on desire sv. this thread is awesome for users. i tried your way to root my device and i succeed, thank you again. i will customize my device with your tweaks,custom roms exc.
edit: so which is your recommended rom ? deodex or the other?
edit2: sorry for my bad english
help
kulveer007 said:
bro i download CWM Recovery_Stock(root)_HTC_Desire_SV.rar...and copy folder (with date and time) in cloakwrk/backup...in recovery i choose backup and restore then restore...then i selected the folder...after a minute it is showin cant open /cache/recovery/last_log...
Click to expand...
Click to collapse
Dude you have to extract that file to clockworkmod/backup\folder(where the folder name will be date and time of back up)
then in recovery menu select backup and restore--->restore-->select the folder-->click yes to install
happy day
First of all i would like to thank ->Tsing Yi qingyi @http://weibo.com/1048297887 for his effort to make this possible!!
As some fellas request....I'm Just giving a detailed guide for the process to have Dual-System{Dual_Boot} in our little dragon @rmani :laugh:
DOWNLOADS:
1.HM1S-Sysrec.zip: http://pan.baidu.com/s/1jGzfP3o
2.M1S-System-Menu1.3-test.zip: http://pan.baidu.com/s/1qWDN5u8
if want it in a simpler way download 3
3.Mokke + Miui.zip: http://pan.baidu.com/s/1sjCyI3z
:good: @bhushan2k
MIRROR Link: https://drive.google.com/folderview...NrYmkzLTN3WmlONEczVnlzajg0emo3ZHM&usp=sharing
WARNING!! : Installation of Dual System is Complecated, include data loss and may brick your devices and i'm not responsible for any kind of Loss or Failure..!!
CAUTION!! : During this Process, Your Phone gets Factory Reset and all internal memory gets wiped!! Make a Backup of all internal data as well as a nandroid to extrnal sd!!
***//For Users coming from MIUI rom and want to have MIUI on one of the Systems continue from step 1-2 and read NOTE and in step 3 tick the checkbox promting special!
STEP1:
Flash HM 1S-Sysrec.zip...[after flashing, recovery gets rebooted].......In this Process Phones Intrernal Memory gets formatted and current ROM gets Factory Reset!
STEP2:
Flash HM 1S-System-Menu1.3-test.zip...Select English->Press Next->Accept and Press Next->Enter the function->Install and uninstall->Install the dual system.....This installs Dual-System and gets rebooted to recovery, meaning dual system got installed!!
**NOTE 1 : If you wish to install mokee+MIUI which was provided #3 in download section.....You can flash that mokee+MIUI.zip here, without proceeding further...and reboot!!
**NOTE 2 : Now we have two System partitions installed and we are on system1, which already have the previous Rom residual and System2 is Void!!
**NOTE 3 : If you want to have a fresh Installation of AOSP Rom on System1, you can directly flash a AOSP rom of your choice! or continue with previous rom!
STEP3:
Now that we have a Rom in System1 [MIUI or a AOSP]....so we need to install system switching software in it....
Flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System I-> Next [check special for MIUI users]...and reboot system!!
STEP4:
After the completion of boot process you will see a system changing app....open the app ->give root permissions and the phone gets rebooted and gets stuck at mi logo indicating we are in System2....Now Enter Reovery (Powr+VolUp same time)
STEP5:
Flash a ROM of your choice...."and dont reboot!"....after flashing rom again flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System 2-> Next....now reboot !!!.. which will take you to ROM installed in System 2 ....
STEP6:
After the completion of boot process, now that you are in System2, will see a system changing app as well ....open the app ->give root permissions and you will be able to switch to the other system/ROM........
////**Manual System switching process: **///
Flash HM 1S-System-Menu1.3-test.zip Follow the prompts to enter the main menu -> enter the function ->System Switching -> and select a System of your choice and proceed and Finally reboot !!!
***///Wanna change rom or try a new ROM keeping the other still///***
Stay on the System on which you want to try a new ROM....Reboot to recovery...
Flash HM 1S-System-Menu-Test1.3.zip and Follow the prompts to enter the main menu -> enter the function ->clear data->
Continuing which will wipes and factory Resets the current Rom....After proceeding further enter RECOVERY....
and Flash the ROM u wanna Try...and repeat #STEP5 and install switching software on new system!!(Hope U Understand)!!!
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
...for further questions comment below...............Give :good: if useful!!!....
Happy Flashing!!!
If anything Goes wrong...How to revert Back ?
Sent From My Redmi
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
can we use rom??and can i install custom kernel for both roms??
as9333 said:
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
2.cwm or twrp...u can try philz.. Dunno..
3.We can browse sys2 directories from sys1 & vice versa
how can i restore my data on my first rom? help me plz
chauhansonu104 said:
how can i restore my data on my first rom? help me plz
Click to expand...
Click to collapse
I don't think restoring nandroid data will work... Because....as u can see there are two two folders inside root/data/.......by restoring data from recovery will first wipes current root/data content and writes content from backup....so no dual-system!!! Hope you understand....tell me whether u have installed dual system? If so once see inside root/data /....u will get it!
sathyakaushik4 said:
can we use rom??and can i install custom kernel for both roms??
Click to expand...
Click to collapse
We can install gapps for system1 and system 2 separately....and can install custom kernels as well...!
very good tutorial.. thnx for this.. I tried on my own and couldnt manage.. will try again this time following ur simple steps..
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Great, Thanks for info, will try after my exams, one again Thank You Very Much.
@as9333
i guess we can switch between system 1 & 2 from recovery itself.. just flash the zip and explore through its aroma installer and see theres that option to switch...
as9333 said:
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
Note 1: Two Roms will be installed with two separate system partitions....all u can do things like installing custom add-ons or patches either being on system1 or system 2..use switching software to switch between system partition 1or 2...
Note 2: U can switch to system of ur choice from recovery...by flashing HM1s-system-menu.zip...there u will c an option to switch system...hope u understand if u had read the procedure with a bit of pathence!
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
N-Gavin said:
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
Click to expand...
Click to collapse
Read note2 of the above replied post...ur doubt will be clarified!!
bhushan2k said:
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
Click to expand...
Click to collapse
Mk+miui is not mandatory to download!!!.... Remaining 2 are <30mb...any ways u made it easy ...tnx for mirror!!
internal storage
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Hsmetric181 said:
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Click to expand...
Click to collapse
figured it out myself,for everybody else
won't format external sd card
and apps will be installed separately
Maybe some mistakes in step 2. The dev recommended unmount system, data and cache before installed Dual-System (doesn't matter really). Some user may need install it twice to success for unknown factors. And as I know on earlier versions, after you installed Dual-System, both partitions are empty. You need to flash a rom to system 1. But I haven't try v1.3 yet so I don't know if anything changed.
The tutorial seems so long but it's very reasonable to proceed.
1. (unnecessary for the 1st time) recover your phone's status - flash sysrec.zip
2. install the dual-boot system - flash into aroma and choose the option
3. flash a rom to current (1st) system - flash it in recovery
4. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
5. switch to system2 - switch directly in the aroma, or [ boot your phone to use the switcher app (after that plz press vol+ to enter recovery because system2 is empty now)]
6. flash another rom to current (2nd) system - just flash it in recovery, it will be in system2
7. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
now you have dual system installed.
For changing between systems, use the switcher (if installed) or change in the aroma installer.
For replacing a rom, switch to the rom you unwanted, and reboot to recovery and flash the new one.
For clear data, don't use recovery,it will clear both. Use the aroma (change to the system you want to clear data and choose clear current).
For miui user, special for miui is actually for miui 6 because /system/app can't get root permission in miui 6.
For uninstall, do it in aroma and then flash sysrec.zip
@pawanzZ
hello android one users
this is my first post so please hit thanks .
please read full thread then do anything .
I am going to tell you how to get your mobile at the stage where you gain your warranty back ,
and your phone will appear brand new as u bought it .
1. flash stock rom with sp tool . (must have boot loader unlocked) hear http://thebroodle.com/micromax/a1/stock-rom-micromax-canvas-a1-android-one-official-stock-rom/
2. after successfully flash start your phone and enable usb debugging
(settings ->about phone->tap 4-7 times Build number now go back to Developer options ->usb debugging )
also enable unknown source
(settings ->security -> unknown source )
3. u must have installed your phones usb driver and phone must have some charge to survive at least 15 min . hear http://www.theandroidsoul.com/downl...501-drivers-usb-adb-windows-8-1-8-7-vista-xp/
4. download the tool named ALL-IN-ONE-TOOL hear http://forum.xda-developers.com/cro...l/tool-master-tool-unlock-bootloader-t2997696
5.download fix all a1 hear https://drive.google.com/file/d/0Bw6KjdLHY2s0MkFrZUdNVVpLM28/view?usp=sharing
and create imei by this http://forum.xda-developers.com/showthread.php?t=2399037
copy the created imei file named "MP0B_001" to
fix all for a1.zip\data\nvram\md\NVRAM\NVD_IMEI copy and replace ( just drag and drop )
then place this zip to your phone sd card .
6. extract it and open all in tool .exe . it take a while .
follow instructions
when the main menu comes type 4 to select custom recovery
it will ask is your bootloader unlocked ?
type 2 "no" .
then it ask choose recovery
type 1 "cwm recovery " .
now connect your phone and see your device must show usb debugging . tick if your phone say something like pc or lapi mac address.
7. now your phone boot into recovery
use up down button and power button to select
go to install zip (second option )
install zip from sd select the zip from sd
press power button and flash zip
______________________
reboot
done
now you have your warranty
working imei
and nvrm in wifi fix .
and your phone is unrooted .
you can install lollipop ota . (when it comes)
A. if your phone working fine after flashing stock rom then leave rest of the steps .
B. if you facing only nvrm error in wifi then then download this zip hear https://drive.google.com/file/d/0Bw6KjdLHY2s0c0trcC1KNTVJQzA/view?usp=sharing
and flash it into recovery
c. if imei + nvrm not working do all steps .
y. please hit Thanks and tell me if any error in this .
z. thanks xda and all known unknown sorces and dev.
thanks
http://forum.xda-developers.com/showthread.php?t=2399037 for imei
http://forum.xda-developers.com/cro...l/tool-master-tool-unlock-bootloader-t2997696 all in one tool
http://thebroodle.com/micromax/a1/stock-rom-micromax-canvas-a1-android-one-official-stock-rom/ stock rom
http://www.theandroidsoul.com/downl...501-drivers-usb-adb-windows-8-1-8-7-vista-xp/ driver
https://drive.google.com/file/d/0Bw6KjdLHY2s0MkFrZUdNVVpLM28/view?usp=sharing fix all
https://drive.google.com/file/d/0Bw6KjdLHY2s0c0trcC1KNTVJQzA/view?usp=sharing nvrm fix
i am not responsible for any kind of error or break . do at your own risk . (its safe {i think })
wifi stuck on "turning wifi on" :'(
i unlocked the bootloader and flashed 5.1 initially (it got some wifi connection problems) so flashed cm12 which makes my wifi to stuck at "Turning wifi on"
now to make things straight i went back to my stock version 4.4.4 which still doesn't fix my problem
some one please help me......................
I did it in this way.
Use sp flash tools and flash stock rom. select firmware upgrade. done.
Hey Guys,
After following all the steps properly with caution i was able to make the stock rom in a CWM recoverable file
I AM NOT RESPONSIBLE FOR ANY DAMAGES MADE TO YOUR DEVICE IF YOU MAKE A MISTAKE IN BETWEEN
BUT I WILL ASSURE YOU THAT I WILL TRY MY BEST TO HELP YOU
This are the files that were backed up , just check to be sure you have all files in the folder / zip
~ System . ext4 . tar
~ Recovery . img
~ uboot . img
~ Boot . img
~ nandroid.md5
TUTORIAL
Step 1 : Unlock Bootloader to flash CWM / TWRP recovery
GUIDE : UNLOCK BOOTLOADER
RECOVERY : DOWNLOAD
I DID NOT MAKE THE FILES TO UNLOCK BOOTLOADER : EVERYTHING WAS DONE BY :
SALMAN986 AND PRIYANSH21
I recommend using cwm
STEP 2 : Extract the stock rom to CLOKWORKMOD/PHILZ/TWRP in sdcard/sdcard1
IF YOU CANT FIND THIS FOLDER > YOU CAN BACKUP YOUR ROM AND CANCEL IN BETWEEN SO THE FOLDER IS CREATED AUTOMATICALLY
STEP 3 : select restore or advance restore
VOILA - The stock rom will be restored
WITH ROOT (KINGROOT) AND BUSYBOX
IF YOUR DATA IS NOT INTACT / PHONE DOESNT REBOOT , CLEAR DATA & CACHE FROM RECOVERY
BE SURE TO LIKE MY WORK , AND HIT THE THANKS BUTTON
MAIN CONTRIBUTORS:
SALMAN986
PRIYANSH21
PLEASE LIKE THEIR WORK TOOO , WITHOUT THEM WE COULD NOT HAVE THE TAIWAN STOCK ROM FOR OUR DEVICE
DOWNLOAD STOCK ROM HERE:
MEGA
Hey, you can do as follows:
~~~~~~~~~~~~~~~~~~~~~~~
Requirements:
* PC
* CWM/TWRP Backup
* CWM/TWRP Installed
* Winrar/7Zip
* Brain
Now the real-deal..
1. Copy the backup from Phone to PC
2. Extract system.ext4.tar file with winrar/7zip, you
will get the system folder
3. Collect the boot.img from the backup
4. Now collect a META-INF folder from any custom
rom/small update zip which is made for HTC Desire 526G+
5. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
6. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
7. Done!! This will flash the stock Taiwan System to your device.
Make sure to hit the thanks button!!
P.S. Can you give the link for Indian Stock ROM.
Thanks.. i followed the procedure suggested by you. Really it is working. Is there any possibility to edit the source code and (As per my customization) compile, generating the images and flashing back. If yes which cross compile tool is required and how to get source code.
Philz touch recovery download for STEP 1 , Instead of using CWM / TWRP
Mega
I have an old Z00A that has hardware problems (constant screen flickering, battery stuck at 50%) so I backed up every partition with TWRP including system, boot , data etc and purchased a new Z00A.
I used the new Z00A for a few days to ensure that there was no hardware problems and then proceeded to unlock the boot loader and flash TWRP recovery. At this point both sims were working.
I then restored the backup of the old Z00A with TWRP on the new Z00A (Had to change folder name so TWRP recognizes the backup from the old Z00A). After the restore was complete and the phone booted, sim1 stopped working.
After searching through the forums and Google I found some solutions to it but none of them seem to work
Solutions that I have tried
1. Factory reset the phone through TWRP
2. Wiped every partition through( exclude SD Card) TWRP, flashed stock recovery and installed the official firmware.zip file through stock recovery
3. Did a factory reset with the stock recovery flashed (skimmed through the setup)
4. I downloaded the latest RAW file firmware and installed it through ASUS Flash Tool (Had some issues at first but eventually it went through but sim1 doesn't work)
5. I installed the official Lollipop rom through fastboot and flashed a custom Lollipop rom
6. Flashed stock based MM rom (CleanStock), custom MM and N roms (CM, Lineage, RR) through TWRP and do factory resets
7. I have tried using the adb shell and root commands to set the IMEI but they still return to 004999--------
8. Placed the sims in the old Z00A and they still work
9. Swapped the sim trays of both phones (sim1 and sim2 works on old Z00A but sim1 still doesn't work on new Z00A)
10. Used phonetools to set IMEI but they still return to 004999--------
From flashing the custom roms and swapping the sim trays I can conclude that this is not a hardware problem. On most custom roms it recognizes that there is a sim inserted in sim1 (A pop up comes up about sim has changed etc...) but there is no signal and the phone says emergency calls only or no service. I believe that the baseband or modem file are somehow corrupted due to the TWRP restore from the old Z00A and need to be reflashed but this only seems possible on the Snapdragon variant.
All help is appreciated on this matter :fingers-crossed:
Captain Krunch said:
I have an old Z00A that has hardware problems (constant screen flickering, battery stuck at 50%) so I backed up every partition with TWRP including system, boot , data etc and purchased a new Z00A.
I used the new Z00A for a few days to ensure that there was no hardware problems and then proceeded to unlock the boot loader and flash TWRP recovery. At this point both sims were working.
I then restored the backup of the old Z00A with TWRP on the new Z00A (Had to change folder name so TWRP recognizes the backup from the old Z00A). After the restore was complete and the booted, sim1 stopped working.
After searching through the forums and Google I found some solutions to it but none of them seem to work
Solutions that I have tried
1. Factory reset the phone through TWRP
2. Wiped every partition through( exclude SD Card) TWRP, flashed stock recovery and installed the official firmware.zip file through stock recovery
3. Did a factory reset with the stock recovery flashed (skimmed through the setup)
4. I downloaded the latest RAW file firmware and installed it through ASUS Flash Tool (Had some issues at first but eventually it went through but sim1 doesn't work)
5. I installed the official Lollipop rom through fastboot and flashed a custom Lollipop rom
6. Flashed stock based MM rom (CleanStock), custom MM and N roms (CM, Lineage, RR) through TWRP and do factory resets
7. I have tried using the adb shell and root commands to set the IMEI but they still return to 004999--------
8. Placed the sims in the old Z00A and they still work
9. Swapped the sim trays of both phones (sim1 and sim2 works on old Z00A but sim1 still doesn't work on new Z00A)
10. Used phonetools to set IMEI but they still return to 004999--------
From flashing the custom roms and swapping the sim trays I can conclude that this is not a hardware problem. On most custom roms it recognizes that there is a sim inserted in sim1 (A pop up comes up about sim has changed etc...) but there is no signal and the phone says emergency calls only or no service. I believe that the baseband or modem file are somehow corrupted due to the TWRP restore from the old Z00A and need to be reflashed but this only seems possible on the Snapdragon variant.
All help is appreciated on this matter :fingers-crossed:
Click to expand...
Click to collapse
very first of all root your device. install any root explorer like es file explorer. enable root explorer and hidden files in options of file explorer.
now go to root storage of device meas (/)
find factory folder in factory go to telephony folder and take screenshot
find config folder and then go to telephony folder and take screenshot
post screenshots here then we will look further
sukhwant717 said:
very first of all root your device. install any root explorer like es file explorer. enable root explorer and hidden files in options of file explorer.
now go to root storage of device meas (/)
find factory folder in factory go to telephony folder and take screenshot
find config folder and then go to telephony folder and take screenshot
post screenshots here then we will look further
Click to expand...
Click to collapse
Screenshots posted
Captain Krunch said:
Screenshots posted
Click to expand...
Click to collapse
flash debug firmware and use intel phone tool
sukhwant717 said:
flash debug firmware and use intel phone tool
Click to expand...
Click to collapse
Can you link me to this debug firmware please?, I have already found the Intel phone flash tool
Captain Krunch said:
Can you link me to this debug firmware please?, I have already found the Intel phone flash tool
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B72QQTXqZSRwTmZoQXZxZ0tvTmc
sukhwant717 said:
https://drive.google.com/open?id=0B72QQTXqZSRwTmZoQXZxZ0tvTmc
Click to expand...
Click to collapse
Thank you very much, after flashing this firmware how do I proceed?, I am currently downloading it and hopefully it flashes successfully
Mods can close this thread as he helped me resolve the issue through PMs
Same issue what to do?
Sent from my AO5510 using XDA-Developers Legacy app
My problem was because of a wrong IMEI, I had to flash the debug firmware he linked above and use phone tools 191 to change the IMEI then sim1 began working.
Send me that tool
mkaraniya said:
Send me that tool
Click to expand...
Click to collapse
Tools: https://yadi.sk/d/30q9w4KJjvgHd
You can also watch this video to help you use the tools: https://youtu.be/5oxug7ThayM
Hi everybody,
I also have a problem with sim card , but it is a little bit different then these that have been described above. First of all my sim is working but not all of the time. I do calls and also I receive a lot of calls. But from time to time sim card just restarts and wants again pin code to unlock ( the phone doesn't restart). A lot of people told me that when they are trying to connect me, their phones are ringing twice and after that they heard busy signal as the call was rejected or the line is busy. In the same time my phone doesn't show any incoming call. Also it is interesting that some people told me that they can't connect me for the hole day and in the same time there is no problem with receiving other calls. From time to time I also can't dial a number. The screen stacks on dialing screen for app. 30 seconds and after that just switch to contacts list.
So what I tried till now:
1. I did a clean install of OTA WW_4.21.40.327
2. Tried to use Sim2 slot, the problems didn't disappear
3. I changed my sim card with new one with no result
4. Tried the sim card with other phone, everything works fine
May be it's time to buy a new phone, but before that I want to be sure that the problems are not caused by software bug.
Any advices and help will be appreciated.
P.S.
The phone is rooted, Magisk 13.3 is installed. The phone is ZE551ML, Z00AD
Captain Krunch said:
Tools: https://yadi.sk/d/30q9w4KJjvgHd
You can also watch this video to help you use the tools: https://youtu.be/5oxug7ThayM
Click to expand...
Click to collapse
is your phone fixed now?
i have the same problem with my lenovo p90 (missing imei). but i cant enabled its com port (no way to fix it with intel phone tool without com port existed). no reference to enable it (the com port) nor imei repair on lenovo p90.
i need you to enter your phone with adb shell as root, and create image of /dev/block/mmcblk0p3 and /dev/block/mmcblk0p5. or just copy config and factory folder, then zipped them, then shared here. i need them, to restore what I accidently erased (config and factory partition).
trust me, i won't do any harm to your specific data.
you're my last hope. i hope you'll understand.
dejoebad said:
is your phone fixed now?
i have the same problem with my lenovo p90 (missing imei). but i cant enabled its com port (no way to fix it with intel phone tool without com port existed). no reference to enable it (the com port) nor imei repair on lenovo p90.
i need you to enter your phone with adb shell as root, and create image of /dev/block/mmcblk0p3 and /dev/block/mmcblk0p5. or just copy config and factory folder, then zipped them, then shared here. i need them, to restore what I accidently erased (config and factory partition).
trust me, i won't do any harm to your specific data.
you're my last hope. i hope you'll understand.
Click to expand...
Click to collapse
Am sorry but I recently sold my ZF2 and currently awaiting a new phone. Am sure someone else on the P90 forums can help you get the files you are looking for