Related
This is a heads up for anybody else that starts having problems with their phone not waking up once the screen goes blank after taking a call:
I put a skinomi kit on my defy, and it works great EXCEPT it fools the proximity sensor thereby rendering the phone unusable! Once in a call and the screen goes blank, there's no way to wake it back up. Strangely, even the power button doesn't do anything.
I used a proximity test program from the market to verify the problem, and sure enough, as soon as I pulled the screen protector off, everything started working fine again! And no, there was not dust/dirt/smudges on the screen protector - must be just the density of the material...
i've to disagree with you ,,,i installed the skinomi kit on my phone maybe 3 months ago,and none of what you say happened even once,your skinomi must by yellow as hell,that's why its missing around with your proximity.just my opinion.
nopr, no yellow.just put it on a couple days ago-very clear.
does yours have a cutout for the proximity sensor? maybe just a hardware variation...
Nope,my kit is full body coverage, with no cuts,so either your proximity sensor is faulty or you got a skinomi knockoff.
Sent from my MB525 using Tapatalk
I can verify that the proximity sensor has issues with skinomi .
Had the same problem ,and solved it with cutting out the part of the screen protector that was covering the sensor .
Since then ,no problem.
Just received a replacement from Skinomi. Same problem - no cut out and the proximity sensor does not work. Manually cut out the area with some scissors, and all is well (but looks bad).
Might be a hardware difference between different variations, but there's definitely a problem for certain models!
I've just received a new Skinomi skin. The area around proximity sensor is cut, so there should be no problem with it anymore. I have not installed it yet though.
Installed it. Works fine. Definitely looks better than bestskinsever I had on my iPhone. Bestskins had an orange peel, Skinomi is smooth. Installation is the same.
Sent from my MB525 using XDA App
I installed an IQ Shield screen protector on my One yesterday. This is the first time I've used a protector that requires water as part of the application process. Just to be safe, I covered the speaker ports with tape. After following instructions on applying it, there were some minor bubbles (expected). After sitting overnight, they all magically disappeared! The instructions claimed this would happen.
Button function is not impaired, fit is precise, it is nearly impossible to detect that it is in place, and it feels slicker / nicer than the raw screen.
Definitely a happy customer.
rootshot said:
I installed an IQ Shield screen protector on my One yesterday. This is the first time I've used a protector that requires water as part of the application process. Just to be safe, I covered the speaker ports with tape. After following instructions on applying it, there were some minor bubbles (expected). After sitting overnight, they all magically disappeared! The instructions claimed this would happen.
Button function is not impaired, fit is precise, it is nearly impossible to detect that it is in place, and it feels slicker / nicer than the raw screen.
Definitely a happy customer.
Click to expand...
Click to collapse
I don't want to get a case for my One (I didn't for my Galaxy Nexus either) but I do want a good screen protector and I've not seen many people raving about any.
Any chance you can take some pics?
Wiggz said:
I don't want to get a case for my One (I didn't for my Galaxy Nexus either) but I do want a good screen protector and I've not seen many people raving about any.
Any chance you can take some pics?
Click to expand...
Click to collapse
I could take a pic, but you won't see anything It is very clear and smooth.
I finally took it off. Because it is a soft style screen protector, fingernails would leave tracks. Looked annoying.
Hi all,
I absolutely just got my Z1c (didn't even turn it on yet), and the first thing that called my attention is that there is a screen protector on the box... so, a few questions:
1) Does this mean that there is no screen protector already installed on the screen?
2) Is it worth installing it or not? I've read that on the regular Z1, the protector is only for shatter protection, but is actually not scratch resistant... if this is also the case for the Z1c, I guess that I will do without the protector... any other reason to install it?
PS: this baby just arrived after pre-ordering it at Sony Mobile Italia...
Thanks,
Leo.
Put it on, should it ever be scratched it is way easier to replace than the original anti-shatter-film mounted on the display panel. And don't forget to protect the back as well, it's only plastic...
----------
tapatalked from Android
urriki out
i almost forgot about that. was too excited to finally be getting a proper phone to be looking at what was in the box.
if you look up where the notification light is, and hold it against the light in a certain way you should be able to see it. they did a neat job of it. i still dont understand why it is there really. if my screen shatters im not going to be able to use the phone any more. maybe they are worried about glass going all my pocket if i break it. umm thanks sony. how thoughtful of you
I think I need some help, running stock just factory reseted phone but problem still there.
When making a call screen goes blank and I can't turn it on after that, can't hang up, can't do anything.
Is there any1 else experiencing this bug?
Maybe your sensor on the front is jacked up?
Nop had it tested in other app.
smaberg said:
Nop had it tested in other app.
Click to expand...
Click to collapse
Try to factory reset it again, or you could investigate if any app you have is causing it.
Hahahahahahahahahahahhah GOT IT.
YOU GUYS WON'T BELIEVE WHAT IT WAS!!!!!!
It's my new tempered glass screen protector..removed it and now works perfect...
Haha, learned something new
smaberg said:
Hahahahahahahahahahahhah GOT IT.
YOU GUYS WON'T BELIEVE WHAT IT WAS!!!!!!
It's my new tempered glass screen protector..removed it and now works perfect...
Click to expand...
Click to collapse
What brand was it?
dont remember, but high quality one, i dont buy cheap stuff...
Same problem here, worked well a couple of weeks. Removed the glass protector, problem gone.
smaberg said:
dont remember, but high quality one, i dont buy cheap stuff...
Click to expand...
Click to collapse
Because I recently purchased one from Xtremeguard and it's currently being delivered to me. I sent an email to them and they claim that the tempered glass does not block the proximity sensor. I've read on another forum that this specific brand provided similar problems to what you experienced.
and also the missed touches on screen gets worse with tempered glass
nillkin tempered glass here without any issues. Can you post up a picture of your screen protector? Maybe the cutouts are different. I also had no idea on the screen protector that was installed by LG (which in different markets may have logos, but mine was clear, even had a tab to remove it, but left it on until I got my tempered glass one)
It's the sensor, not the protector
smaberg said:
I think I need some help, running stock just factory [reset] phone but problem still there.
When making a call screen goes blank and I can't turn it on after that, can't hang up, can't do anything.
Is there any1 else experiencing this bug?
Click to expand...
Click to collapse
I have the same problem with my LG V10. I have NOTHING blocking the sensor. I just discovered that light level alone will cause the black screen.
I tried calling with a bright light overhead. No black screen.
I caused a shadow over the sensor (NOT blocking it, just a shadow). The screen went black. The same thing happened when I was in the T-Mobile store, with no block and no shadow.
Guys, I had the exact problem. And you DO NOT have to remove your protector, you just need to recalibrate the sensor. There is a tutorial, use the Search.
Did anyone manage to do this with Verizon?
flypiper said:
Same problem here, worked well a couple of weeks. Removed the glass protector, problem gone.
Click to expand...
Click to collapse
thanks without screen protector working fine
Hi everyone,
I am seriously considering buying the Moto Z2 Force as a replacement of my old Moto X 2014 (I still love it but my screen got a bit shattered one year ago:crying.
The only thing that is holding me back is that screen peeling problem I heard of. So, after reading some threads I would like to see how spread the problem is by proposing you this survey.
In case you had the issue, it would be very useful for me to know how you solved (got a replacement, removed the shutterproof screen protector, ...?)
Thanks a lot!
Here I am, replying to my own survey!
Unfortunately, not as I would like to...
I bought it and on day 2 I noticed this issue https://youtu.be/KfEjQWtvckQ which is how everything starts I suppose...?? So, I think this will be a "In the first month case".
Now I have to think of what to do:
Keep it and wait for it... (what then?!)
Send it back to seller asking for a refund => Buy another model, other brand (It would be really sad though)
Send it back to seller asking for a change with another one (what if the new one will have the same issue?)
Removing somehow the screen protector and the glue (any tutorials? Will it void the warranty?)
Any suggestion is much appreciated
Thanks a lot
I knot sure what that video was suppose to show. But to me it showed nothing of importance.. I have had my z2 Force for about 2 months with no issues.. Use a screen protector or a case with one, and you should have zero issues.
doubledragon5 said:
I knot sure what that video was suppose to show. But to me it showed nothing of importance.. I have had my z2 Force for about 2 months with no issues.. Use a screen protector or a case with one, and you should have zero issues.
Click to expand...
Click to collapse
The video is supposed to show a problem with the shattershield screen where the outer screen protector lense is detached from the inner layer.
Some people on Lenovo forums reported screen peeling issue after experiencing something like the video shows.
On the same forum, some other people claim they had a screen protector on when the peeling started.
Anyway, I contacted Motorola Support and they:
Confirmed that if you remove the outer layer, the warranty is permanently voided for the whole phone... Not good
Suggested me to refer to the seller for a substitution since I am in the first two weeks after buying the phone
Still deciding what to do...
I tried the tempered glass screen protector I ordered.
It doesn't adhere correctly on the top of the screen but especially on the bottom, near the fingerprint scanner.
So, the screen is not perfectly flat.
kir89 said:
I tried the tempered glass screen protector I ordered.
It doesn't adhere correctly on the top of the screen but especially on the bottom, near the fingerprint scanner.
So, the screen is not perfectly flat.
Click to expand...
Click to collapse
I purchased a Otter Box Defender, and that might be why I have no issues.. On my G5 Plus I had a Otter Box commuter and a screen protector and they worked well as well.. If your nervous about that pone, best bet might be to replace with a different model.. I sure as hell would. Good luck.
kir89 said:
Here I am, replying to my own survey!
Unfortunately, not as I would like to...
I bought it and on day 2 I noticed this issue
which is how everything starts I suppose...?? So, I think this will be a "In the first month case".
Now I have to think of what to do:
Keep it and wait for it... (what then?!)
Send it back to seller asking for a refund => Buy another model, other brand (It would be really sad though)
Send it back to seller asking for a change with another one (what if the new one will have the same issue?)
Removing somehow the screen protector and the glue (any tutorials? Will it void the warranty?)
Any suggestion is much appreciated
Thanks a lot
Click to expand...
Click to collapse
Have the same issue and can hear that. But it seems to be normal. I can push in the screen a little bit. I think it's not the original foil of the top, which is pelling. I think it's hearable because it's plastic and elastic. I can see (by screen on) that's not the foil while I'm pressing the screen in. It's more the complete screen. Would it be the foil, I wouldn't see what I see by pushing in the screen. Plastic is easly elastic. That's all.
Here is an update.
Yesterday I received the other plastic screen protector I ordered.
It fits perfectly, since it's not as rigid as glass.
Since many of you have the same "clicking" noise while pressing the screen, I think I will try to use it in the next days to see how it goes. I have some weeks to think about keeping it or sending it back to the seller.
Hope everything will be ok, I'll keep you updated
kir89 said:
Here is an update.
Yesterday I received the other plastic screen protector I ordered.
It fits perfectly, since it's not as rigid as glass.
Since many of you have the same "clicking" noise while pressing the screen, I think I will try to use it in the next days to see how it goes. I have some weeks to think about keeping it or sending it back to the seller.
Hope everything will be ok, I'll keep you updated
Click to expand...
Click to collapse
It's not the foil, right? That's the plastic which is"clicking". I'm short-sighted and I'm pretty sure that I can see that's just elastic at the bottom. Looks so that the foil is ok and 100% save on the screen. But it's nice to have a elastic screen :laugh: No scratches after month. So, don't need a screen protector. The quality seems good. It's like wings of a airplane. Elastic, too And there is all ok, too. Normally
allrightlite said:
It's not the foil, right? That's the plastic which is"clicking". I'm short-sighted and I'm pretty sure that I can see that's just elastic at the bottom. Looks so that the foil is ok and 100% save on the screen. But it's nice to have a elastic screen :laugh: No scratches after month. So, don't need a screen protector. The quality seems good. It's like wings of a airplane. Elastic, too And there is all ok, too. Normally
Click to expand...
Click to collapse
I am not sure it's the foil or not... However, I don't think is the screen which is moving, that's probably more a refraction effect. We should ask to those that removed the protection layer, if they where experiencing this and after the removal it stopped.
Foil or not, if the "clicking" sound is so common even in devices without peeling issues, I will give it a try.
I just need to use it, only time will say if it was a good idea to keep it :fingers-crossed:
kir89 said:
I am not sure it's the foil or not... However, I don't think is the screen which is moving, that's probably more a refraction effect. We should ask to those that removed the protection layer, if they where experiencing this and after the removal it stopped.
Foil or not, if the "clicking" sound is so common even in devices without peeling issues, I will give it a try.
I just need to use it, only time will say if it was a good idea to keep it :fingers-crossed:
Click to expand...
Click to collapse
Screen is moving down at the bottom, for me it's 100% so. And if I do it carefully, I can see it without hearing it. But yes, would be nice if anyone can test it without the foil. But, I can trust what I see, all real. So, it's the plastic. Hope anyone else can confirm this.
Another problem, what I have seen. I have burn in at the bottom. The navigation buttons keeps/burn in. Now I have set up the moto fingerprint navigation and it should gone next time. And that's really good. Works very well. And the space of the screen is now bigger, nice effect.
But, good to know with the burn in. This smartphones are made for a short time, maybe 2 years. On my computer monitor I have never seen burn ins like that. So, it's a market/business. Screen not made for working over years
And what really is very very good is the battery. Have last time good 8.5-9h sot. So, that's better than many people think.
But back to the screen. That's the topic here. Maybe we have to bring it to the repair center after 1.5 years. Maybe because burn ins, peeling and so on. We will see
If you guys do the warranty replacement through Motorola and not your carrier they will send you a new moto z2 force with a 2nd gen screen if you ask em about it. They have a fix for it lol I just got mine back and it's totally different
ninjakira said:
If you guys do the warranty replacement through Motorola and not your carrier they will send you a new moto z2 force with a 2nd gen screen if you ask em about it. They have a fix for it lol I just got mine back and it's totally different
Click to expand...
Click to collapse
Ok, maybe I have a newer one. Here no scratches after months. Foil ok. Just the clicker at pushing. You don't hear that on your device? Which versions are 2. generation, after which produce date?
allrightlite said:
Ok, maybe I have a newer one. Here no scratches after months. Foil ok. Just the clicker at pushing. You don't hear that on your device? Which versions are 2. generation, after which produce date?
Click to expand...
Click to collapse
What am I supposed to be hearing on my device lol? And idk I just personally call it a 2nd gen screen cause it's easier to explain it like that to the people that I live around in my area ??there not to bright lol. I do know it's not the original shatter screen stuff that was peeling. it honestly was pretty hard for me to understand what my moto agent was saying to me when he explained it so I only caught bits and pieces. My model number is still xt1789-04 TMobile variant. I don't have a clicker also