Related
Hi all,
Just day ago baught TP2 and it's great. but today got in problem.
there are invisible glide protectors on side of keyboard, and from one side this protector came off - and now every time I open it, it's more and more coming off.
so what you think? is it possible to get new them somewhere? or it's sefe just to remove them? all of you have the same at their phones?
test157 said:
Hi all,
Just day ago baught TP2 and it's great. but today got in problem.
there are invisible glide protectors on side of keyboard, and from one side this protector came off - and now every time I open it, it's more and more coming off.
so what you think? is it possible to get new them somewhere? or it's sefe just to remove them? all of you have the same at their phones?
Click to expand...
Click to collapse
That is the normal protectors installed from factory, during manufacturing for product quality reasons. I admit that they really protect the plastic from getting scratched. But as mentioned in the manual, you should remove it from the phone itself (both glide stickers, the upper sticker in the keyboard, near the hidges, the back screen cover sticker and the front sticker protecting the screen). To substitute, I must say that problably you should cut some plastic clear sticker (same used to protect book covers) with the size and format of the sticker removed and attached in the glide sections to protect it from scratches of opening and closing the keyboard.
thank you very much for your info.
but can you say me where exactly did you find info about removing this protectors? I just looked in manual what was on CD with my phone for word "protect" and not found any info about that.
and yes, I saw that those protectors had scratches, they were noticeable - but with time they will become more and more visible (more scratches, dirt around them e.t.c) + I don't think I can cut them so accurate as they were...
so all owners of T2? did you remove these protectors? did you got there scratches after removing them?
P.S.: Black Phoenix you leaved your protectors also? just on keyboard?
test157 said:
thank you very much for your info.
but can you say me where exactly did you find info about removing this protectors? I just looked in manual what was on CD with my phone for word "protect" and not found any info about that.
and yes, I saw that those protectors had scratches, they were noticeable - but with time they will become more and more visible (more scratches, dirt around them e.t.c) + I don't think I can cut them so accurate as they were...
so all owners of T2? did you remove these protectors? did you got there scratches after removing them?
P.S.: Black Phoenix you leaved your protectors also? just on keyboard?
Click to expand...
Click to collapse
At the moment I have all the protectors, because I'm waiting for my Screen Protector from Proporta. The others in the keyboard I will keep, mainly because I bought a phone with the keyboard but I only use the screen one, not the physical one (so If I had open the keyboard 10 times since I had the phone was too much).
If it is a clear sticker than obviously you remove it once it wears out and live with it....
yep, I got it. but hope to hear from other owners who already removed them, what experince they got - any scratches or nope?
Mine is sliding off on the left side only. I was just going to slice off the part that is crinkling up and keep the rest of it on. I don't want to find out if it will get scratched or not.
I removed the ones on the sides as i knew they were merely their from the factory and not actually their to protect during use. I dont have any scratches on the keyboard.
The back one, under the middle of the screen i havent removed because it looks like it would be too much of a pain to try. So im just waiting till it starts to come off on its own.
if you're concerned about being able to cut them as precise as the originals just use an exacto knife. Just put the plastic piece over the plastic you will use to replace it and trace it with the knife.
i just cut off the tips on both sides as it was crinkling up, kept the rest of it
Lyian said:
I removed the ones on the sides as i knew they were merely their from the factory and not actually their to protect during use. I dont have any scratches on the keyboard.
The back one, under the middle of the screen i havent removed because it looks like it would be too much of a pain to try. So im just waiting till it starts to come off on its own.
Click to expand...
Click to collapse
how long you are useing it without stickers? and how offten do you open hw keyboard?
test157 said:
how long you are useing it without stickers? and how offten do you open hw keyboard?
Click to expand...
Click to collapse
just rip it off and live with it dude... I took the film cover off of my Xperia and nothing happened to my keys. If you are worried about the glossy back scratching than you obviously have too little things to worry about.
And if you are that person than obviously you can afford a second one because taking it off won't damage any phone.
poetryrocksalot said:
just rip it off and live with it dude... I took the film cover off of my Xperia and nothing happened to my keys. If you are worried about the glossy back scratching than you obviously have too little things to worry about.
And if you are that person than obviously you can afford a second one because taking it off won't damage any phone.
Click to expand...
Click to collapse
well if really, I don't worry about back side scratches and about other minor things all I see now it's two stickers what are located on the left and right sides from the keyboard (i don't see so space in xperia), this space is used for gliding - so every time you are opening keyboard, two small stands from the back of the screen sliding in this area, where these stickers are - and after two days of using this device - this stickers are pretty scratched. so I decided to ask, if it's safely to remove or it's they needed to be replaced and seems like I'll finish by removing them both.
but anyway other owners experience is welcome
test157 said:
well if really, I don't worry about back side scratches and about other minor things all I see now it's two stickers what are located on the left and right sides from the keyboard (i don't see so space in xperia), this space is used for gliding - so every time you are opening keyboard, two small stands from the back of the screen sliding in this area, where these stickers are - and after two days of using this device - this stickers are pretty scratched. so I decided to ask, if it's safely to remove or it's they needed to be replaced and seems like I'll finish by removing them both.
but anyway other owners experience is welcome
Click to expand...
Click to collapse
Just like I said........ the back side get's scratched....
unless you are talking about the sticker that is most likely found on the bottom half (the half that is on the same plane as the keyboard).
If so, then I hope it only scratches everything but the qwerty keys.
test157 said:
how long you are useing it without stickers? and how offten do you open hw keyboard?
Click to expand...
Click to collapse
I took it off within a couple days, cause thats when i noticed they were even there lol. Its hard to say how often i open it. I generally text with the keyboard all the time (vs using the on screen one). Some days ill send 4 or 5 text messages, some i wont send any.
I dont think any of us has really had it long enough to even accumulate scratches from simple wear and tear. What you have to realize is that plastic film, is the same kind they wrap EVERYTHING up with. It was on my 46" LCD (the frame i mean) as well as both of my 19" monitors (also the frames). They wrap electronics up in that crap to keep it from getting scratched during manufacturing and shipping, but it rarly ever looks good left on.
My point? it isnt meant for long term protection. Just rip it off and run with it. The plastic housing is the same material/texture as what they use on laptops (least on mine) so it will take the wear and tear. I suspect over time it will develop 'slide' marks on it, but it wont take anything away from the device itself.
Lyian said:
-
Click to expand...
Click to collapse
yep thank you, now i c that it's the one right decision, just to remove them
poetryrocksalot said:
-
Click to expand...
Click to collapse
I'am sure that we are talking about the same things but anyway I attached photo to this post, with marked RED scratches on the sticker, and marked in BLUE came off part of this sticker.
all my previous HTC phones herlad and wizard had special sliders - where the display glides, here it glides on the viewable area and it don't seems really very scratch resistance, so it's confused me.
the protector at the middle top of the keyboard, and the one behind the screen
i wonder whether sliding is affected by the 2 protectors?
I had 4 protectors: screen protector, behind screen one, and two at keyboard - on it's sides (on of them you can see on my photo), so while gliding only these 2 protectors are affected.
i removed the small one at the middle top of the keyboard
now the sliding is smoother!
i am left with the one behind the screen... should i remove..?
ok... i removed the one at the back
and now the sliding action is super smooth
So around more than a month ago I ordered one piece of XtremeGuard screen protector off eBay from the official retailer. I just really wanted to give it a try even knowing that the Xperia Play already comes with a shatter-proof film fitted on it. My order didn't arrive within the 20-day period so I requested a refund. They refunded my $4 and to my surprise, the item came this afternoon after more than a month since it was ordered.
Now I'm really thinking twice...
So here are my questions:
1. when installing the XtremeGuard screen protector, do I have to remove first the shatter-proof sheet already fitted on the Play's screen?
2. anyone got a video for the installation of XtremeGuard? I very well understand and speak English but then their instruction material is kinda vague. And knowing that the installation involves water and soap, I think this procedure should be taken seriously since it may damage internal circuitries of the phone. So a video of the installation should really help!
Thanks everyone! Will be waiting for your replies!
Screenguards are generally of varying quality. I haven't heard of that particular brand. However, most screen guards are applied in one of two methods:
1) Sticky/Sticker application. The screenguard has a side with a glue applied. You carefully apply it and hope for the best.
2) AdhesionCling with soap/water/alcohol. Basically you strip off the old guards if you have one, clean the screen, then apply a _very thin_ layer of this soap/water/isopropyl-alcohol solution to the screen. You then apply their clingwrap style of screen guard starting from the top and slowly slide it into place, trying to avoid as many bubbles as possible. You then use a credit card or a supplied squeegee tool to try and squeeze out the bubbles while the liquid is still there. If you are lucky and get them all out, let it dry for 4~12 hours. Then it should be stuck there pretty good until something randomly peels the corner.
With all screenguards there are pros and cons.
Pros:
Less likely to scratch screen. Slight bit more impact resistance against breaking your screen. Some provide anti-glare or even tilt-angle shading for privacy (prevents shoulder surfing, but lowers visible angles).
Cons: Slight to moderate less responsiveness and accuracy from the digitizer (thing that recognizes your fingers). Depending on the material and formulation, you may also have a negative tactile response (gummy or sticky, compared to the bare glass). Buildup of gunk around edges of screenguard (this is particularly prevalent on the whole-device type covers, or ones that aren't touching all the way to the bezels).
I can't prescribe an exact way of doing it, but look for some of the YouTube videos on how to apply the ZAGG screen protectors. They apply with the soap/water/alcohol solutions, so it may be close enough to your type to be similar visual instruction.
whoa thanks for that buddy!
now I'm thinking twice again.. I can live with lesser angled views but with LESS RESPONSIVE DIGITIZER? No way!
narflynn619 said:
whoa thanks for that buddy!
now I'm thinking twice again.. I can live with lesser angled views but with LESS RESPONSIVE DIGITIZER? No way!
Click to expand...
Click to collapse
Any screen protector will do that. Some do it worse than others. Some do it so slightly that you don't notice it (or you just become adjusted to it over time).
By far my favorite screen protectors are the anti-glares. They don't have that sticky feeling that the BodyGuardz or Zagg ones do, and the viewing angle is butchered. After this anit-glare wears off I will finally also remove the stock one that comes on it. My touch response is very wonky sometimes.
Same deal here I tried the same buyer I'm sure and I had the same problem. Dont use ebay!
Cubsfan3493 said:
Same deal here I tried the same buyer I'm sure and I had the same problem. Dont use ebay!
Click to expand...
Click to collapse
why what happened?
Hello all!
First time posting in a while, so forgive me if I'm a bit rusty. I just got my Samsung Galaxy Note 10+ yesterday, and my amFilm Ultra Glass Screen Protector today, so I thought I'd write up a little review. Sorry for no pics, but I was busy installing and trying to keep things dust-free
I've used Whitestone in the past but was disappointed with both my Note 8 and 9 installs, primarily because of the LOCA spiderwebbing on the edges. I figured I'd give another brand a shot, so I went searching here and found the amFilm Ultra Glass Screen Protector. A quick trip over to Amazon, and $40 later (for a full kit including *2* protectors) and here we are!
PACKAGING: The box is nice - wider and flatter than the WS product. It's clean and simple, but professional looking. Plus their website and install video are well done also. Inside the outer box are three smaller boxes. The largest contains the plastic frame, screen protectors, and wipes (I think). The medium size box contains the UV light and the MicroUSB cable. It appears to be identical to the WS product, but I don't know this for a fact, so take that for what it's worth. The smallest box contains the LOCA (2 tubes), extra absorption pads, plastic pin, tabs to place over the speaker, a bubble level, and a weight. Everything you need comes in this kit, including plenty of wet and dry wipes, microfiber cloths, and dust removal stickers. On the packaging is a QR code to go to the install video.
PRODUCT: Everything seems to be on the same quality scale as the WS product, with a few minor changes - 1) there is no LOCA applicator "bridge", you have to aim and dribble the solution by hand, 2) the pin is different - there's no more tilting the entire phone to move the liquid into position - the pin is angled and sets the glass down at an angle, and 3) the "fingerprint" weight (more on this later). Otherwise, if you've done the WS before, this isn't significantly different.
INSTALLATION: **REMINDER** REMOVE the factory plastic screen protector and clean your screen THOROUGHLY before proceeding! I ALMOST forgot, which would have been a disaster! I watched the video twice and didn't see any mention of this, so amFilm, here's a tip for you Anyway, installation is straightforward -put the little feet on the bottom of the phone to bring it flush with the pins inside, make sure the screen is 100% clean, install the sticker over the speaker, apply the liquid (making sure to absorb any "splatter" before proceeding!), peel the protective film off the glass, place it, and pull the pin. Once the liquid starts to spread, put the weight where the fingerprint sensor is and let it settle and "ooze" for 3-ish minutes. (NOTE - it's hard to locate the fingerprint scanner, so you might want to mark the frame in advance with a Sharpie (another tip for amFilm - marking that plastic with some kind of raised bumps or hash marks might be a good idea, or maybe a film for on top of the glass that marks where to place it - just a thought). After that, it's bake-time under the UV light, then you're done.
RESULTS: I'm very impressed so far. The glass appears to be nice and clear, and I can't even see the little "spots" in the corners others mentioned. I lucked out this time and no dust specs at all. No bubbles, etc. the fingerprint scanner appears to be working fine, although I haven't re-registered anything. It DOES require a little extra "umph" to scan, but that's not a big deal. Part of that could be me getting used to an in-screen scanner. There was minimal over-oozing, and the pre-installed pads absorbed everything fine. Barely needed a wipedown afterward.
FITMENT: There appears to be no flaws in placement using the guide, or in the fitment of the glass. It sits flat, and lines up exactly where it should. The cutout for the front-facing camera is exactly where it should be, and it's not overly-exaggerated in size. The edges leave plenty of room for putting the phone in a case (I've tried 4 so far, all fit without touching the glass edge, so there's no worry about case push on the glue). The bottom edge is just a tad bit short, maybe a 1/16", but that could be allowing for larger cases (I don't use the big bulky ones, so IDK).
OVERALL ASSESSMENT: 4.5/5 Stars - Great product, especially for the price. I'll keep you posted on long-term wear & quality, but for now, I'd say it's a great deal versus the competition.
Thanks for the feedback, just got my note 10 plus and am trying to filter out the paid/promo reviews vs legit ones.
I may go this route with amfilm as well. i bought the tech matte clear case, so i hope it fits well within it without popping off.
hows your experience after putting it in a case?
I applied mine the other day, and while I'm happy with the fit & finish, my fingerprint reader is spotty at best. In addition, my frame snapped, so I need to contact customer support to send me another one. because it snapped it ended up leaking LOCA all over the place, too.
entropism said:
I applied mine the other day, and while I'm happy with the fit & finish, my fingerprint reader is spotty at best. In addition, my frame snapped, so I need to contact customer support to send me another one. because it snapped it ended up leaking LOCA all over the place, too.
Click to expand...
Click to collapse
Isn't that glue suppose to cure? When you say it snapped did it spill liquid after the snap?
joogle said:
Isn't that glue suppose to cure? When you say it snapped did it spill liquid after the snap?
Click to expand...
Click to collapse
The frame snapped during install, without me noticing. Because it wasn't holding everything in place very well, the glue ran EVERYWHERE. Under the phone, over the sides, etc.
So yes, once I got everything fixed as well as I could, the glue cured fine. But you don't cure it until you're basically done and ready to go.
entropism said:
The frame snapped during install, without me noticing. Because it wasn't holding everything in place very well, the glue ran EVERYWHERE. Under the phone, over the sides, etc.
So yes, once I got everything fixed as well as I could, the glue cured fine. But you don't cure it until you're basically done and ready to go.
Click to expand...
Click to collapse
If you turn sensitivity on, does that resolve the fingerprint issue?
No, sensitivity is already up. I’ll have to replace the protector soon anyways, we’ll see if another install will make things better.
entropism said:
No, sensitivity is already up. I’ll have to replace the protector soon anyways, we’ll see if another install will make things better.
Click to expand...
Click to collapse
The September update includes improved finger printer recognition.
Ok I decided to go ahead and buy the amfilm note 10 plus screen protector from Amazon. Watched their video and then another on Youtube like twice. I think I got the install right, the whole weight placing situation is a guesstimate, if they are reading this thread - put something on the tray to take the guessing out of the process, like a stick with a weight so it stays in one spot.
Also, the glue stick - be careful when lifting it to make sure no drop falls out - i didnt put the black cap back on - saw an extra few big drops fall on my desk - no biggie - but if it was on the screen would have been a hassle.
then the UV light shuts off at 45 seconds - their last instruction is to keep it lit for 60 seconds - they should probably adjust it - again not a big issue.
in terms of quality of the screen protector - looks good - its a thin piece of glass - hopefully it protects the screen. the fingerprint sensor - its been a hit/miss kind of. i added my same thumb print twice, sometimes it has to read directly in the middle of the thumb, othertimes i feel like i have to press harder. I didn't try the fingerprint sensor before the screen protector so don't know if its just the way it is.
I would rate this like 3.5 / 5 -- i think tempered glass is solid, the fingerprint sensor can be annoying, its not really that smooth like if you slightly put your finger/thumb on it that it will open. like literally it won't take it on first try, on second or third try it will take - that is the most annoying part about it.
the install process was decent, as long as you watch the videos first - its straight forward.
price wise its sucky - i wish they would sell this for $20 - even with just one screen protector. $40 is steep, replacement protectors they can probably price between $7 to $10 i feel.
By the way this is the same UV type device used to cure fingernail paint - lol - your household may already have one.
I don't have the Whitestone to compare to. But I can say man the Samsung film screen protector is solid, used it for few days, even when taking it off it was on perfectly. I kind of miss it but i think tempered glass will offer more protection on a fall.
Pictures, please.
https://www.amazon.com/dp/B07VKHMK9J/ref=cm_sw_r_fm_apa_i_2oX0DbYMHRS0A
I've installed two of these protectors on a note 10 + and a note 10. I did have the issue with the frame cracking with the note 10+ but the company has since fixed that issue.
I've used WDG for a few years now and this one has exceeded my expectations and is better than Whitestone.
The installation is simple and comes with a weighted cylinder that's used when you're curing the glass with the UV light. I've had zero issues with the finger scanner as well as my daughter on her note 10. I actually put the cylinder on while the glue was spreading. I can actually see a circle where the finger print scanner is at and I think this is a recipe for success. I've installed these just after release and they still look brand new. Scanner works great! I can provide forage if anyone is interested. The price is great for getting two in the box. I highly recommend!
I'd really hate having to spend $50 dollars on a new Whitestone protector. I've seen some cheaper alternatives on Alibaba for the Note 10 and S10 series, but nothing for the S20 Ultra. Any alternative suggestions other than leave the default film protector for now?
So I used to use the Whitestone Dome on all my phones but I found out that assurion has a screen only replacement for phones, I paid a deductible of $35 for my S10+ and someone came to my house and fixed my phone. Since this day, I stopped buying screen protector
Note. I have no idea if the Ultra will have the same screen replacement program, I assume it does.
I have been using whitestone since the S8+.
Rarely do I get a perfect install, but today I got pretty close on my S10 ultra. Bubble free, some small specs of dust that you don't see unless on an all-white screen.
It was an easier install this time due to the curved edges being reduced to much less of a curve.
Samzebian said:
I have been using whitestone since the S8+.
Rarely do I get a perfect install, but today I got pretty close on my S10 ultra. Bubble free, some small specs of dust that you don't see unless on an all-white screen.
It was an easier install this time due to the curved edges being reduced to much less of a curve.
Click to expand...
Click to collapse
How is the ultrasonic fingerprint scanner performing after the install?
teamfresno said:
How is the ultrasonic fingerprint scanner performing after the install?
Click to expand...
Click to collapse
I just found out about the whitestone and this was my first time using one. I learned the hard way that a perfectly level surface is not a suggestion. So first install was an utter fail. I used the backup screen and it went ok, had to wait for like 5 minutes for the liquid to fully spread. i assume this was from the failed first attempt. Once it fully spread, i moved the screen around to get it perfectly placed so that i couldn't see any air pockets underneath the corners. then i used the UV light to cure it and everything looks great now.
To answer your question, the fingerprint reader has worked flawless for me. Since i immediately put on the protector, i didnt get to use the finger print reader much before. So its hard to compare, but there is minimal delay for me for it reading the finger print. Honestly 90% of the time the camera picks up my face and unlocks before i have the chance to use the finger print.
bwachtel said:
I just found out about the whitestone and this was my first time using one. I learned the hard way that a perfectly level surface is not a suggestion. So first install was an utter fail. I used the backup screen and it went ok, had to wait for like 5 minutes for the liquid to fully spread. i assume this was from the failed first attempt. Once it fully spread, i moved the screen around to get it perfectly placed so that i couldn't see any air pockets underneath the corners. then i used the UV light to cure it and everything looks great now.
To answer your question, the fingerprint reader has worked flawless for me. Since i immediately put on the protector, i didnt get to use the finger print reader much before. So its hard to compare, but there is minimal delay for me for it reading the finger print. Honestly 90% of the time the camera picks up my face and unlocks before i have the chance to use the finger print.
Click to expand...
Click to collapse
I had the same issues and since I never used a glass and yet alone a wet application screen protector I botched the first one. The adhesive didn't roll down the then little circle and I accidentally tilted it to the right. Everything went wrong. Cleaned it went for the 2nd one and I was super careful after letting the adhesive out. It was still a bit to the side but I was able to slightly tilt it and center the drop. Once I pulled the tab it spread as evenly as it could have but I had a slight air bubble on the top left. I waited about 2min but it wasn't moving so I applied slight pressure from right to left to spread it a bit and it ended up spreading evenly after.
Idk if I ****ed it up again but we will see if it holds. It feels and looks amazing and I'm glad to get rid of the oem film as that **** scratches by breathing on it.
elracing21 said:
I had the same issues and since I never used a glass and yet alone a wet application screen protector I botched the first one. The adhesive didn't roll down the then little circle and I accidentally tilted it to the right. Everything went wrong. Cleaned it went for the 2nd one and I was super careful after letting the adhesive out. It was still a bit to the side but I was able to slightly tilt it and center the drop. Once I pulled the tab it spread as evenly as it could have but I had a slight air bubble on the top left. I waited about 2min but it wasn't moving so I applied slight pressure from right to left to spread it a bit and it ended up spreading evenly after.
Idk if I ****ed it up again but we will see if it holds. It feels and looks amazing and I'm glad to get rid of the oem film as that **** scratches by breathing on it.
Click to expand...
Click to collapse
My OEM protector had nicks and scratches out of the box...
Pretty much same scenario you described. Put mine on Tuesday night and no issues so far. I think we will be fine so long as you had no air bubbles before the curing.
I Noticed a tiny delay when using the screen protector. I did re-enroll my fingers, but it was slightly faster for me with the oem protector. (which offers only scratch protection)
Do you guys believe the S20 Series of device would be fine with non loca screenprotectors? those available for practically all other flat screen devices? since the screen isn't curved that extreme anymore.
Seems a tad faster than the Note 10+ with the Domeglass protector.
Something changed with these protectors over the last year. I used to get perfect installations every time. Last 4 had bubbles even though I follow the instructions to the letter. These will also crack VERY easily. Think this may be my last DG..
Mike02z said:
Seems a tad faster than the Note 10+ with the Domeglass protector.
Something changed with these protectors over the last year. I used to get perfect installations every time. Last 4 had bubbles even though I follow the instructions to the letter. These will also crack VERY easily. Think this may be my last DG..
Click to expand...
Click to collapse
Don't they have lifetime warranty
Whitestone and tamoria both an epic FAIL
Sent from my SM-G988U1 using Tapatalk
---------- Post added at 08:31 PM ---------- Previous post was at 08:30 PM ----------
They male them thinner for fingerprint
Sent from my SM-G988U1 using Tapatalk
S20 ultra comes with a screen protector pre installed.
Why would you put another on?
socalstagetech said:
S20 ultra comes with a screen protector pre installed.
Why would you put another on?
Click to expand...
Click to collapse
use it for a couple of month and you know why....
I ost my Note 10+ a few days ago, a first for me. I immediately considered it found and stolen as I could see the person who found it via GPS, driving about the area where it fell off of my truck. So after two unanswered calls to said phone? I immediately wiped it and so at least my very minor personal data is secured. Whomever it as, *did* happen to get a very extensive, 40,000+ file .flac/.mp3 library on my spare SD Card but that's quite redundantly maintained/backed up so no real loss.
I immediately bought an exact replica of the lost Note 10+ from the same great seller as before, an ebay "excellent" condition refurb. The phone was here in 2 days then a quick visit to the local ATT store and I'm now back in business as usual, taking literally about 20 minutes to have the exact same phone/usage apps/settings and basically a Note 10+ set up precisely as my former phone had been. This is a relative topic with most users, myself included, as each of us may more or less appeciate any given app or feature ... but for me? Google sync and restore is a metaphorical Golden Unicorn(tm) lol.
But to my main question...
How can I determine if the Samsung default screen protector/film is installed on this new "refurb."
The screen on this unit is flawless, having no discernable marks or scratches, not even of the micro variety. But I have noticed that the thumbprint sensor is quite more responsive than my previous Note 10+ which definitely had the stock screen protector as, over the years, it had began to bubble ever so slightly and in certain places.
I've examined the edges of the new screen at great length under more than ample lighting and with very good magnification equipment and can find no visible "seam" or otherwise around the edges and where one would expect to find such a seam for any phone panel that had one of those super thin, super transparent protectors installed.
I will say that I found the stock Samsung protector on my first Note 10+ to be quite good, as good as any of the "tempered glass" varieties I'd used with previous phones though after two years of fairly rough use, there were small areas appearing where the Samsung factory screen film was beginning to show it's natural limitations.
So any ideas short of close examination with a good light source and high quality magnifying glasses would be welcome. If I do determine it is completely lacking in the inclusion of the factory installed panel film/protector (only reason I can imagine is if the previous user had removed it) then I will of course want to begin researching an appropriate 3rd party option that works well while maintaining solid use of the fingerprint sensor...
So any tips would be welcome...
Thanks in advance,
Joel Harris
The front cam hole will likely have a cut out in the screen protector if present. Slight seams are visible on one or more of the edges. Also the glass feels different than any plastic protector. Gorilla IQ Sheild is a good wet apply protector.
s1rrah said:
I ost my Note 10+ a few days ago, a first for me. I immediately considered it found and stolen as I could see the person who found it via GPS, driving about the area where it fell off of my truck. So after two unanswered calls to said phone? I immediately wiped it and so at least my very minor personal data is secured. Whomever it as, *did* happen to get a very extensive, 40,000+ file .flac/.mp3 library on my spare SD Card but that's quite redundantly maintained/backed up so no real loss.
I immediately bought an exact replica of the lost Note 10+ from the same great seller as before, an ebay "excellent" condition refurb. The phone was here in 2 days then a quick visit to the local ATT store and I'm now back in business as usual, taking literally about 20 minutes to have the exact same phone/usage apps/settings and basically a Note 10+ set up precisely as my former phone had been. This is a relative topic with most users, myself included, as each of us may more or less appeciate any given app or feature ... but for me? Google sync and restore is a metaphorical Golden Unicorn(tm) lol.
But to my main question...
How can I determine if the Samsung default screen protector/film is installed on this new "refurb."
The screen on this unit is flawless, having no discernable marks or scratches, not even of the micro variety. But I have noticed that the thumbprint sensor is quite more responsive than my previous Note 10+ which definitely had the stock screen protector as, over the years, it had began to bubble ever so slightly and in certain places.
I've examined the edges of the new screen at great length under more than ample lighting and with very good magnification equipment and can find no visible "seam" or otherwise around the edges and where one would expect to find such a seam for any phone panel that had one of those super thin, super transparent protectors installed.
I will say that I found the stock Samsung protector on my first Note 10+ to be quite good, as good as any of the "tempered glass" varieties I'd used with previous phones though after two years of fairly rough use, there were small areas appearing where the Samsung factory screen film was beginning to show it's natural limitations.
So any ideas short of close examination with a good light source and high quality magnifying glasses would be welcome. If I do determine it is completely lacking in the inclusion of the factory installed panel film/protector (only reason I can imagine is if the previous user had removed it) then I will of course want to begin researching an appropriate 3rd party option that works well while maintaining solid use of the fingerprint sensor...
So any tips would be welcome...
Thanks in advance,
Joel Harris
Click to expand...
Click to collapse
Most likely, Being a refurb with flawless screen, it probably had it's screen replaced and replacement screens don't ship with that Samsung factory screen protector on them. Most likely no screen protector in place
blackhawk said:
The front cam hole will likely have a cut out in the screen protector if present. Slight seams are visible on one or more of the edges. Also the glass feels different than any plastic protector. Gorilla IQ Sheild is a good wet apply protector.
Click to expand...
Click to collapse
Thanks mate ...
Checked all the obvious variables and there's def no protector on the screen.
I found tons of "IQ Shield" variants on Amazon but none specifically made by Gorilla, which is a brand I tend to trust. Any further info?
In the interim, I bought this uber cheap but very well reviewed cheapo. If it works half as good as the reviews seem to indicate then it should be fine.
Thanks again ....
s1rrah said:
Thanks mate ...
Checked all the obvious variables and there's def no protector on the screen.
I found tons of "IQ Shield" variants on Amazon but none specifically made by Gorilla, which is a brand I tend to trust. Any further info?
In the interim, I bought this uber cheap but very well reviewed cheapo. If it works half as good as the reviews seem to indicate then it should be fine.
Thanks again ....
Click to expand...
Click to collapse
Get a couple, just in case. Things must be as dust free as possible ie spotless on the glass and room where applied. Don't touch the glass or back surface of the protector. Use enough of the fluid to get it aligned spot then work the air bubbles out. Watch it to make sure it stays adhered to the curve portions of the screen.
Just press and briefly hold if it lifts up. Use a little of the fluid if needed. If it ever lifts up on the sides later as long as no dust or dirt get under it, it can be reattached with a little water and pressing it down.
Leave it set up for at least a couple hours before using if possible. Mind the edges don't lift, usually after 10 minutes that's no longer an issue. Any small micro bubbles will be absorb in a few days... not big air bubbles though.
The Zizo Bolt is an excellent case for it.
That's all I use, zero damage in almost 3 years.
Enjoy, the Beast is a great phone!
blackhawk said:
Get a couple, just in case. Things must be as dust free as possible ie spotless on the glass and room where applied. Don't touch the glass or back surface of the protector. Use enough of the fluid to get it aligned spot then work the air bubbles out. Watch it to make sure it stays adhered to the curve portions of the screen.
Just press and briefly hold if it lifts up. Use a little of the fluid if needed. If it ever lifts up on the sides later as long as no dust or dirt get under it, it can be reattached with a little water and pressing it down.
Leave it set up for at least a couple hours before using if possible. Mind the edges don't lift, usually after 10 minutes that's no longer an issue. Any small micro bubbles will be absorb in a few days... not big air bubbles though.
The Zizo Bolt is an excellent case for it.
That's all I use, zero damage in almost 3 years.
Enjoy, the Beast is a great phone!
Click to expand...
Click to collapse
Thanks for the detailed tips, friend. Much appreciated. But exactly what screen protector are you referring to? The originally mentioned "Q Shield" variant? Or the one I mentioned already ordering, which is the Apiker random find off of Amazon.
If you're referring to a specific brand/model of protector, be it of the "Q Shield" sort or otherwise? Please send me a link if your able to do so.
As it turns out? The randomly ordered Apiker kit I bought from Amazon based solely on user reviews alone, has turned out to be pretty okay. As with many such products, especially those for phones with curved edges, there really is value in going over some install videos and what not but the first application turned out pretty damn good.
The kit came with 4 of everything so for the money and the fact that 2nd and further applications would of course be more intuitive, makes it a decent value.
Also, the Apiker screen kit I bought is not tempered glass but some other sort of material but still has a decent feel overall. The main thing I like is the thumb sensor is still every bit as sensitive/responsive as it was when using the naked, glass screen.
But send me some info on the kit you were referring to that uses what you called "fluid" ... I'll get one of those too lol!
And yeah, mang. Note10+ FTW! Mine was stolen about a week ago .. only time I've ever lost it ... but it wasn't 20 minutes before I'd ordered a new "refurb" off Ebay which I'm currently using now.
I tend to always buy whatever the flagship Sammy was 3 or so years ago and always end up saving tons of money and being very happy with whatever that ends up being. I bought a 1 day temp new Galaxy A12 at the local ATT shop to use till the Note10+ replacement came in and the Note10+ processing speed is WAY better than the A12, which frankly was just a sluggish dog in comparison.
Thanks again for the info..
"IQ Shield"