can anyone help me going back to stock ?
will samsung switch recovery will work?
i am currently on aduax plus M v.7.0
Samsung smart switch will work!!!
It will ask for your Model Name And Serial No(Which you can find it from Setting/About Device/Status/) but process will wipe all data form device and install latest Stock Rom based on your Model.
Related
Hi All,
I wonder if someone would give me some help please. Basically I want to upgrade to the Official ICS released by T-mobile however my phone has a bootloader DarkSideX that I cant seem to get rid off. I've followed a posting on how to revert back to stock but this bootloader is still there plus when I start Kies it states:
Your device does not support software upgrades via Kies
Current Firmware version: PDA:KID / PHONE:K11 / CSC:KID (TMB)
Thanks in advance,
Aaron.
Get Odin and go to t989 android Dec section and find the Odin file its the newest one it was ugy in the name some where that's all I remember look thought the link
http://forum.xda-developers.com/showthread.php?t=1705565
Sent from my SGH-T989 using XDA
Hi everyone, new android user here! I'll try to make this as brief as possible:
Recently purchased a used Unlocked Galaxy S3.
Currently using Bell Carrier on it and it works fine.
I noticed that even after restoring SuperSU was installed.
Checked download mode -> odin installed with custom binary
Checked to see if the phone has root access -> it does not
I wanted to try and flash it with a official ROM to completely restore factory settings but I don't know what the original carrier is so I don't know what ROM to download. I called a couple carriers but they have no record of the IMEI.
I'm fairly new to android and my past two days of google searching hasn't accomplished anything relative to my problem (although I know a lot more about the rooting community!) so I thought I'd ask here.
Is there any way to know what's going on here?
Can I restore the phone to factory firmware/ROM/etc.?
Here is some phone information:
Model: SGH-I747M
Android Version: 4.1.1
Baseband: I747MVLDLK4
Kernel: 3.0.31-538866
Build Number: JRO03L.I747MVLDLK4
Any help would be greatly appreciated!
Just go and download this program http://www.samsung.com/ca/support/usefulsoftware/KIES/JSP
Go to Tools > Firmware Install and Initialization
It will ask you for your model number and Serial number. It will use those to determine what stock ROM is correct for your phone.
It will then flash you to stock, just as Odin would, including the stock recovery.
theXact said:
Hi everyone, new android user here! I'll try to make this as brief as possible:
Recently purchased a used Unlocked Galaxy S3.
Currently using Bell Carrier on it and it works fine.
I noticed that even after restoring SuperSU was installed.
Checked download mode -> odin installed with custom binary
Checked to see if the phone has root access -> it does not
I wanted to try and flash it with a official ROM to completely restore factory settings but I don't know what the original carrier is so I don't know what ROM to download. I called a couple carriers but they have no record of the IMEI.
I'm fairly new to android and my past two days of google searching hasn't accomplished anything relative to my problem (although I know a lot more about the rooting community!) so I thought I'd ask here.
Is there any way to know what's going on here?
Can I restore the phone to factory firmware/ROM/etc.?
Here is some phone information:
Model: SGH-I747M
Android Version: 4.1.1
Baseband: I747MVLDLK4
Kernel: 3.0.31-538866
Build Number: JRO03L.I747MVLDLK4
Any help would be greatly appreciated!
Click to expand...
Click to collapse
It definitely looks like you are on the stock Jelly Bean firmware from Samsung. I747M is the Canadian model (747 is ATT). Your build number also looks to be the stock 4.1.1 based on the DLK4 build number! Just as the last guy said, grab kies or use Odin to go back to complete stock if you are not happy with what you have now. If your phone is showing custom binary flashes and you want to get rid of that, give Triangle Away a try! Good luck. :good:
Lumixz said:
Just go and download this program *link removed since I'm a newbie*
Go to Tools > Firmware Install and Initialization
It will ask you for your model number and Serial number. It will use those to determine what stock ROM is correct for your phone.
It will then flash you to stock, just as Odin would, including the stock recovery.
Click to expand...
Click to collapse
Thank you! That worked like a charm! The device is now in a "normal" state and the binaries are "official".
BAM1789 said:
]It definitely looks like you are on the stock Jelly Bean firmware from Samsung. I747M is the Canadian model (747 is ATT). Your build number also looks to be the stock 4.1.1 based on the DLK4 build number! Just as the last guy said, grab kies or use Odin to go back to complete stock if you are not happy with what you have now. If your phone is showing custom binary flashes and you want to get rid of that, give Triangle Away a try! Good luck.
Click to expand...
Click to collapse
Thanks for the advice! I'm not too concerned about the flash count, that's only really important your warranty to to be valid, right? But I'll look into it, it may be worth it anyway.
Thanks again everyone!
I just wana to ask that is it possible to get back the 850MHz 3G by flashing official rom from "http://forum.xda-developers.com/showthread.php?t=1275680" . I don't want to loose the root. i want to get back the radios. Got to check out something. Please also tell me is there is possible to just flash flash any such radio from anywhere else. What are the prerequisites to be checked before flashing any official rom ?
i want to do this urgently.
firstly i apologise for my basic knowledge of this sort of thing, help would be greatly appreciated.
my unlocked at&t galaxy i747 recently was repaired via jtag after an over the air update bricked it.
i got it back and after an hour my sim wouldnt connect to the network anymore and i noticed the camera didnt work.
the guy who fixed it told me to wipe the devlik cache and factory reset which i did but i still had the camera and network issue.
i was hoping to flash back to stock rom so i cleared the current rom with the philz recovery and tried to install a stock on odin but it failed.
my main issue is that is if i have to send it back id like to with a rom on it. so if someone could provide me with a rom that will work id be most thankful. if i recall he installed a custom rom that said it was on the 4.1.1.1 version of android. the baseband wasnt ucdlk3 like my stock roms on the pc i tried to flash were. it had numbers like ...m j b ?
after i do that im hoping the guy will tell me how i can fix the camera and network issues. id rather have all stock rom and such but i dont want to interfere with that hes done.:crying:
i have a 16gb storage card so i can install the rom via zip if necessary. thanks for reading this, alex.
also i dont know if this is important but then i click turn off in recovery it says root missing.do you want to root? i just always click no.
Well if your on mjb then you can't flash to 4.1.1 or anything below 4.3 as the efuse has been triped and won't allow any other boot loader to run resulting in a brick.....so if you can flash 4.3 firmware to your phone and see if you can get it to boot.....if you can't then you may need to unbrick it with either the sdcard method or a JTAG again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
After installing cyanogenmod 6.0 for n7100 and beanstalk 6.0 for n7100 I found out that my data plan does not work on either of these roms. Also, my phone says its a sgh-i317 but my settings say that its a n7100. Help pls.
Im now unrooting the phone and putting a stock rom on it but it says that my phone is a t03g when its actually a t0lteatt in twrp. How do I change this back?
Before flashing anything else, confirm the model number in download mode. This is the only way to reliably determine the correct model number.