Develop Bugs

Mini USB to 3.5mm audio ???

I have just got delivery of my Asus P320 Windows smartphone. But unfortunatly i have discovered that there is no 3.5 mm or 2.5 mm headphone jack on it. I am wondering if there are any 5pin Mini USB to 3.5mm or 2.5mm headphone adapters, If not, is there anything i could use with windows mobile 6.1 to get music through bluetooth to a small module which I could connect a 3.5mm headphone jeack to. Thanks for your help.

yes their is a usb to headphone jack you can buy
.... never seen a small module but you can stream your bluetooth to a bluetooth headset

Yeah I already have an expensive set of New sennheiser headphones which i do not plan to replace. they are wired so If i was to go the bluetooth route it would be to get a small module which I can connect a 3.5mm audio plug into to convert it to bluetooth signals to my phone.
But you say You have seen 5pin Mini USB adapters, Any Idea where you saw them and where i can get it from,,,, specifically?

Brett Hill said:
Yeah I already have an expensive set of New sennheiser headphones which i do not plan to replace. they are wired so If i was to go the bluetooth route it would be to get a small module which I can connect a 3.5mm audio plug into to convert it to bluetooth signals to my phone.
But you say You have seen 5pin Mini USB adapters, Any Idea where you saw them and where i can get it from,,,, specifically?
Click to expand...
Click to collapse
I take it there arnt any as there was no reply

11 pin here:
http://www.amazon.co.uk/Earphone-Excalibur-Advantage-Cavalier-DURAGADGET%C2%AE/dp/B000UUQGEY
Or this looks promising
http://accessories.euro.dell.com/sna/productdetail.aspx?c=uk&l=en&s=bsd&sku=A1707080&cs=ukbsdt1&dgc=SS&cid=5186&lid=121454

I am using this one
Works great! Just plug in any 3.5mm headset and you even have call handling and mic on it!

hi,is there anything like that ,that would work on iPAQ 614c?

miniUSB dont carry audio
it's like normal usb a serial digital data transfer std.
thats why htc have extUSB which is miniUSB with analog audio in the extre wires
pc headsets or speakers which use usb are really external audiocards which transfer the
digital data into analog sound
as far as I know no device can use en external audiocard unless it support usbHost which pretty few wmobiles seem to do

ok,thanks,then i'll have to keep on "enjoying" the music with headphones i got with device heh

Brett Hill said:
I have just got delivery of my Asus P320 Windows smartphone. But unfortunatly i have discovered that there is no 3.5 mm or 2.5 mm headphone jack on it. I am wondering if there are any 5pin Mini USB to 3.5mm or 2.5mm headphone adapters, If not, is there anything i could use with windows mobile 6.1 to get music through bluetooth to a small module which I could connect a 3.5mm headphone jeack to. Thanks for your help.
Click to expand...
Click to collapse
Try this its the same one that i use for my HTC Touch
http://www.daydeal.com/product.php?productid=15367&cat=3078
Should fit the bill for you, Daydeals.com carries a lot of stuff but i was unable to find your phone sadly

Just arch on ebay for a "mini usb to 3.5 jack and it will come up with loads all min haved worked with my tytn and tytn 2 all apart the one i bought which said it fits a motorola razor!!!
Also i have not payed more than about £7 inc postage so far.
Happy hunting.

HI I have the same problem. I have an I-mate Ultimate 8150, I bought it used and when I opend the box I realised that the were no head set or charger.
I'm seeking the polish internet for a adapter 11 pin miniusb - jack 3.5 with no results. I bought an adapter for motorola v3 and it isn't working just like a head set for motorola K1 on miniusb.
I-mate 8150 is very similar to XDA Flame and I think that in those models the sound pins are different do the in the HTC models.
I am looking for some 11 pin miniusb schema (the socket is also used to charge and comunicate with computer).
I've seen an adapter on http://www.imatephonestore.com/accessoryDetail.asp?accMDL=AUDIO_CONVRTR
but i think that the price is too high for such a thing.
Maybe some one knew how to make this adapter or how to remake the motorola k1 headset to work on I-mate 8150
Plaese help me I don't now what else to do thanks

get 11 pin to 3.5 mm
even iam using htc
nd in htc we also have 11 pin jack
i saw one very good converter on :- http://www.amazon.com/Touch-3-5mm-S...tionId=1XM1P73VXKBX6ZQPKN02/mixi-20/ref=nosim
however instead of buying that wt i did i bought a erricsson bluetooth enabled headphones they are cool nd free from entangles nd best part is that even my bluetooth have 3.5 mm jack so i can connect with my car.

Well I bought 2 of 11 pin to 3.5 mm headset adaptor convertor for HTC. Though both are working same but little difference make them very unique. First one is Stereo Converter 11pins to 3.5mm adaptor which simply let me to use my Blackberry curve headset with G1. Other one is cool coz it comes with microphone as well answer switch. I am now using my 3.5 mm headset with G1 and also talking and answering from the same headset converter. Its really cool check this our http://www.fommy.com/accessories.as...obile+G1&cat=Headsets&subCat=Headset+Adapters

Cool I just order one for me the Streo headset adaptor with microphone and answer switch. Along with this I also got 3 in 1 USB adaptor. This one comes with 3 ports to connect 3.5 mm headset jack, 11pins to 11pins HTC adapter and USB connected that can be use to sync or charge G1

11pin is no good, Im looking for the 5pin usb which is on the Asus P320, are there any atall, I have already tried buying a motorola one which has the right connectors but does not transmit any sound.

I have the same phone and looking for the same converter
r there any converters specially available for this phone out yet?

I have AKG's and so youre telling me I cant use them even If I get the USB to audio jack adapter? Also In our store this guy connects his phone to the stereo system in the store with a mini audio (banana plug I think) to the system and plays his music of his phone..can the TYTNII do the same?
BTW, even if I could use the AKG headphones it probably would sound so loud as these are high ohms headphones AKG 240MKII..right? any cheap micro sized headphone amps around?

The mini USB port in asus p320 is actually a 10 pin port (5 on top and 5 on bottom). out of them 5 pins are used for audio and microphone. And others are for USB. Hope this information will be useful for searching 10 pin mini USB to 3.5 mm audio.

I've been using this for my xv6900. It works great.

[Q] 2.5 mm headphones

2.5 headset
I have an o2 XDA Atom Exec and got an o2 in-ear stereo headset with it.
That headset is now faulty, one side no longer works and i cant determine where the problem is.
Anyways, i want an in-ear headphones to use with the pda mainly to listen to audio rather than to make calls.
I tried connecting it with 3.5mm headphones with an adapter but with any movement of the adapter, the pda would automatically stop the audio and load dial the first number on the dialed list. Its very annoying.
I tried both the small stick type adapter and the wire adapter with the same result.
So now i'm after an in-ear stereo 2.5mm headset or a solution to stop it from going to the phone mode.
Any help ?
Thanks

is it work fine be4?
perhaps There is some short circuit in your headphone itself or maybe in jack port. trying use another headphone to identify the problem

oftenly headphone for mobile has 4 intersection in its jack. and common music headphone only have 3 intersection, I think use the 3 intersection jack should be fine

you can use the nokia 2.5mm headsets. they are like the OEM ones but they sound better. they both use the 3 ring jack, instead of the more standard 2 ring jack.

Arc S earphone jack configuration

does anybody know of a software solution like an app or some other hack to make the earphone jack on the Arc S compatible with aftermarket earphones having a inline mic?
background --
The headphone jack on the Arc S is different from those found on motorola, iphone or HTC phones. The four connectors have the same configuration for the left and right audio channel but the connections for mic, ground are interchanged. 99% of the earphones with inline mic available in the market are made to the iphone specs and hence are not compatible with SE arc s. I have these ones and these, but when i plug them into the phone it just says "accessory not supported" .
I had the same problem with my last phone samsung wave which also has the flipped ground/mic connectors. The earphone that came with that phone also work on the arc.
There are cables available that fix this problem -- http://www.amazon.co.uk/gp/product/B005I0GHV8 (I have bought this one)
http://www.meelec.com/MEE_TRRS_Adapter_for_P_Version_Headphones_p/adptr-trrs-35.htm
http://www.kvconnection.com/product-p/km-354r2m-r3f.htm
galaxy s users can use an alternative voodoo sound driver to mke the earphones compatible without the need for additional adapter cable.
can something similar be done for Arc S? , (I have bought one of those adapter cables but it sucks to have it dangling from the phone all the time)

base on my experienced, you can try this.
SE supply the wired Handfree kits right? along the kit got
1. stereo jack with mic inline (you should notice the jack has 4 metal/copper connection to be plug in to the phone)
2. in the middle have mic and an answer button + another Stereo jack receiver,
3. after that, then you will have a bit short wire stereo earphone with a stereo jacks but without the mic inline wire (you should notice the jack has only 3 metal/copper connection)
you should connect your wire input device to the stereo jack after the mic, because after the mic only the circuit will only supply sound output voltage (+ left, + right & -ve for both earphone)
...i am sorry for my bad English
goodluck
-ALi

@putrabiru
you seem to have misunderstood the problem
earphones that don't have a mic in them(3 rings on the jack) already work fine if connected directly to the phone.
I am looking for a way to make earphones with inbuilt mic(4 rings on the jack) work with the arc without an additional piece of wire between the phone and the earphone jack.
So i am basically looking for a way to make the phone treat the mic and ground connectors opposite to how they are set up by default. This will definitely require a kind of mod to the system files of android or the drivers. I've even read about other users of samsung phones who opted to physically replace the headphone jack unit on their phones with standard configuration ones!
Sony should have kept the configuration the same as how most earphone manufacturers make them.

Sony actually uses the agreed OMTP standard for mobile headsets. The reason for all these problems is nothing other than the recent popularity of crApple.
Just get a cheap OMTP adapter off ebay. You should be able to find one by searching for something like "Motorola headset adapter" etc.

As Paul stated, Sony Ericsson actually followed the standard, Apple did not. I would suggest to look for an adapter if you want to use "iPhone compatible" headsets.
Sent from my LT15i using XDA App

Try to plug only the first 3 pin leave out the last it works for me

Headphone Jack Broken (Kinda)

So I have read about Z5P having headphone jack problems. So mine has started to that today. If I pressed on my headphone jack so hard it would detect the headphone but if I relased my finger it would detect that headphone is disconnected which is still connected.
So I reasearched and found out about soundabout and I tested it and it detects my headphones with it. And I also realised that headjack is a bit loose and my plugged in headphones can shake a little bit inside the jack. So I think this is hardware+software problem.
The think is headphone jack is definitely broken but why does it work with soundabout? Oh also if I shake the jack while headphone is connected it will also disconnect from soundabout but that is not bad as without it (at least it works).
I am also using the m-rom light build will that cause a issue?

I guess this phone is totally dead will never ever get support from someone considering the activity on this forum. Looking forward to replacing this piece of crap.

oguzbatu said:
So I have read about Z5P having headphone jack problems. So mine has started to that today. If I pressed on my headphone jack so hard it would detect the headphone but if I relased my finger it would detect that headphone is disconnected which is still connected.
So I reasearched and found out about soundabout and I tested it and it detects my headphones with it. And I also realised that headjack is a bit loose and my plugged in headphones can shake a little bit inside the jack. So I think this is hardware+software problem.
The think is headphone jack is definitely broken but why does it work with soundabout? Oh also if I shake the jack while headphone is connected it will also disconnect from soundabout but that is not bad as without it (at least it works).
I am also using the m-rom light build will that cause a issue?
Click to expand...
Click to collapse
I replaced the headphone port and turned the problem off and then came back again after using the note that I rarely used headphones

atyah said:
I replaced the headphone port and turned the problem off and then came back again after using the note that I rarely used headphones
Click to expand...
Click to collapse
A bit late replay but it seems that headphone jack quality on Z5P is just terrible.

Redmi Note 8 Microphone Problem

Anyone face the same problem?
I have a Boya BY-A100 External omni condenser microphone. I want to create an amateur home recording. for my bass trombone. The built-in microphone is too noisy and sensitive for me since I can hear "windy" sound when recording in my room, since there is no fan and silent enough. And there is vehicle sound which just passed in front of my house that can be heard clearly in my recording (rather than my trombone).
When I plug the external microphone, It's blinking in notification. And my recording has no sound at all. When I use the recorder app, my sound is just "skipping". It's annoying. I have another lavalier external microphone, but it has the same problem.. But the weird is when I plug my earphone (XIaomi in-ear HD) everything is working fine.
I have found the same problem in YouTube that the use of splitter may work. Then I bought a cheap U-shape splitter with the earphone and the external microphone plugged, then i plug it to my phone. But still, THERE IS NO SOUND AT ALL. It's annoying so much.
My Begonia (Indonesia) is Global MIUI 11 with Android 10 QGGMIXM.

having same problem mate

the same problem with the Boya By - MM1 external microphone
I have the same problem with the Boya By - MM1 external microphone. I read that the problem concerns all external microphones connected to the minijack socket on the Redmi Note 8 Pro phone. When a microphone is connected, the headphone diode flashes and the recorded sound is interrupted at the same frequency. I have reported a problem to Xiaomi technical support many times. I have been ignored. People around the world report a problem with microphone malfunction. This is a common problem. If anyone wants to use an external microphone, the Redmi Note 8 Pro is useless.
Is the problem due to a bug in the android system software or is it a technical defect?

Fix Found!!!!!
The trick is fairly simple.
I have a Boya MM1 mic and it was very very annoying that the mic icon kept blinking in note 8 pro.
Fix is simple.
1. Get a y split cable ... 3.5 mm male to two 3.5 mm female converter.
2. Connection 1 - input The cable with spirals (for DSLRs) to the smartphone to the mic end of the splitter.
3. Dummy connection- Input the smartphone end of the other cord into the other split cable end.
This fix works like magic, for more info
Type external mic not working in XIAOME now 8 pro in YouTube edwin bonus guy.
The video is Japanese but you'll get the gist.
Thank you

Man that was a pain but i luckily found a solution with some cables and adaptors i had at home:
I previously used IRIG pre to connect my condenser mic to my phone via 3.5 mm jack, so what i did from there is connect it to a cheap "ugreen" chinese mini soundcard/splitter (to the headphone/mic combo jack), i connected this to a USB to USB-C adaptor which i then connected to this stupid phone and TA DAM! it worked!

dudave said:
Man that was a pain but i luckily found a solution with some cables and adaptors i had at home:
I previously used IRIG pre to connect my condenser mic to my phone via 3.5 mm jack, so what i did from there is connect it to a cheap "ugreen" chinese mini soundcard/splitter (to the headphone/mic combo jack), i connected this to a USB to USB-C adaptor which i then connected to this stupid phone and TA DAM! it worked!
Click to expand...
Click to collapse
hi all
i have same problem by recording cable when i connect my yamaha keyboard to phone and headset icon blinking and record corrupt
i test it on note 7 and note 6 pro and not problem ...
i m in iran and i cant find trrs cable ...
is there software solution for this problem ? maybe change rom or change system files ...