Guys I need your help
I don't know what happened to my Note II phone.
Only thing I've done was to root it. I'm still using the same O.S. I haven't tried flashing something on it before
Here's what happened.
I was just chillin, chatting on Messenger when all of a sudden, the phone LED indicator flashes but it doesn't unlock. then the phone died and when i was trying to charge it, there was only a charge icon on the screen but it wasn't moving.
The next day i bought a new battery and now what happened was that it wasn't going through the Galaxy Note II screen (bootloop perhaps?) i tried going through recovery mode -- dead android icon then it shuts down. and i was still able to access download mode
before i was able to follow the soft brick recovery mode, all of a sudden it doesn't even go to recovery/download mode anymore
LED indicator does not turn on for charging even if i plug it into the charger.
What do i need to do? i don't have JTAG as an option
I read somewhere that I you can boot hardbricked phones using an SD card by doing something about partition stuff there will that work? :laugh::laugh::laugh: hope to get some replies from you guys :good::good:
Have you tried using a 2.0 amp charger and letting the phone charge for a few hours?
audit13 said:
Have you tried using a 2.0 amp charger and letting the phone charge for a few hours?
Click to expand...
Click to collapse
no i haven't tho the battery has a charge (i tested it on a different note 2 i booted)
phone doesn't go into recovery mode anymore. anything i can do to revive it? btw sorry for the late reply
Not much you can do if the phone can't get into recovery mode.
When connected to a computer, do any devices appear in the device manager?
I am also facing the same problem,,,,..not entering to recovery mode .......when trying to install stock firmware through odin (using windows 10)it says nand write and next step fail....i didn't even root my phone.....please friends help me....Thanks in advance....and yes it enters to download mode
Are you using the original Samsung USB cable? Tried other USB cables and all USB ports on the computer? What is the specific Odin error?
audit13 said:
Are you using the original Samsung USB cable? Tried other USB cables and all USB ports on the computer? What is the specific Odin error?
Click to expand...
Click to collapse
i don't have the samsung cable,,,,I was using the sony data cable with cylinder shapes at the ends
yes,i tried all the ports
odin says FAIL! after the Nand write start
What is the error message in Odin? You could also post the log from the log window.
Related
Hello, I purchased a phone off kijiji fully knowing it was not functional - For the 40 dollars my curiosity got the best of me; and if I can fix it well I can get myself a new phone for cheap. I was informed that this phone: Samsung Galaxy sgh-i747m had the latest update (not custom rom). The phone suddenly would not boot past Samsung logo and by the time I bought it, would not boot up at all. So after doing extensive research I decided I would give the 16gb class 10 sd card boot a chance. While somewhat of a success, the only thing it boots me to is this.
BOOT RECOVERY MODE (IN GREEN)
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 159488 SECTORS
FLASH WRITE FAILURE (RED)
ODIN MODE (RED)
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER AP SWERV: 1
I should note that with the debrick-SGH-I747M-UEMK5 image that I used, the phone will boot to recovery mode without holding any buttons(While Plugged in). It will also boot to recovery if it is unplugged and I simply hold and release the power button when I feel the vibrate. I have also tried volume down + home + power. Same thing. If I take the sd card out I cannot get any sign of life / no recovery mode.
The computer does not see the device at all, even in device manager as a random name. There are no signs of life on the computer end. ODIN also does not detect it even when in boot recovery mode. Will not boot to download mode. A red light comes on if I pull the battery out and plug in the usb cable.
Do you have access to a USB jig to see if you can get into download mode?
audit13 said:
Do you have access to a USB jig to see if you can get into download mode?
Click to expand...
Click to collapse
No, I was contemplating making one or ordering one online but was unsure if that would make any difference. But I am willing to try anything even if there is a slight possibility it could work.
Where are you located? I recall seeing a thread on XDA about people that has a USB job for use by other XDA members.
audit13 said:
Where are you located? I recall seeing a thread on XDA about people that has a USB job for use by other XDA members.
Click to expand...
Click to collapse
I am in Thunder Bay, ON
I'm in Toronto which doesn't help you right now. Maybe order a USB jib and see what happens.
If you decide to sell the phone, let me know as I need to try and repair a phone that has a defective lcd and digitizer.
audit13 said:
I'm in Toronto which doesn't help you right now. Maybe order a USB jib and see what happens.
If you decide to sell the phone, let me know as I need to try and repair a phone that has a defective lcd and digitizer.
Click to expand...
Click to collapse
Will do. Going to build jig today and test it out
Another solution may be to have the firmware flashed via jtag.
You should be able to flash with Odin from there if I'm not mistaken. (Been a long time since I've been through this part myself). You may need to try different drivers, different cables, usb ports, etc.
audit13 said:
Another solution may be to have the firmware flashed via jtag.
Click to expand...
Click to collapse
Yea I didn't want to have to go that route if possible as my goal was to gain experience and knowledge from this little project. If I got the phone working then I would just replace my old Samsung infuse. I made the USB Jig using the 301K ohm's and it still does not work. I know the jig works because I tested it on my wife sgh-i747m and also on my infuse. Both of which boot into download mode immediately. My concern is there is something wrong with the main board because it really doesn't seem like it was rooted at all.
I am just going to see what I can get for it at this point, I paid 70 so would be looking to get at least 60
DocHoliday77 said:
You should be able to flash with Odin from there if I'm not mistaken. (Been a long time since I've been through this part myself). You may need to try different drivers, different cables, usb ports, etc.
Click to expand...
Click to collapse
I have tried 5 different cords, and two different computers on all usb ports. Nothing
You said it'll boot recovery, is it stock or a custom one? Also, are you familiar with ADB?
When you plug it into the computer, is it detected by odin? If so, what does it say in the message box when you try to flash?
Look in device manager too. What does it detect the device as?
gravitysdepth said:
Yea I didn't want to have to go that route if possible as my goal was to gain experience and knowledge from this little project. If I got the phone working then I would just replace my old Samsung infuse. I made the USB Jig using the 301K ohm's and it still does not work. I know the jig works because I tested it on my wife sgh-i747m and also on my infuse. Both of which boot into download mode immediately. My concern is there is something wrong with the main board because it really doesn't seem like it was rooted at all.
I am just going to see what I can get for it at this point, I paid 70 so would be looking to get at least 60
Click to expand...
Click to collapse
Hi,
Send me a message of you want to sell your s3.
Cheers.
I have an SGH-i747m and I'm having the same problem. Was a solution ever found?
Black Adam said:
I have an SGH-i747m and I'm having the same problem. Was a solution ever found?
Click to expand...
Click to collapse
You have the Canadian version of the s3? Will you phone boot into download mode without the sd card installed?
Sorry, I have the SGH-i747. The phone only boots with the SD card and just stays in download mode. Odin doesn't recognize it.
Black Adam said:
Sorry, I have the SGH-i747. The phone only boots with the SD card and just stays in download mode. Odin doesn't recognize it.
Click to expand...
Click to collapse
What was the last stock ATT ROM on the phone? Can the phone boot into download mode without the external SD card?
When you connect the phone to you computer in download mode, are you prompted to install drivers? If you are using Windows, any unrecognized devices in device manager?
And don't forget to try different cables and every USB port on the computer. Cables go bad much more easily than most people think, and many charging cables cannot be used for data transfer.
I've seen a number of times where people found that only one of the USB ports would allow it to connect.
You might also want to try several different driver versions. (I'd start with the oldest that was release along with the S3.) You can find several in the link in my signature.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
A friend had this note two and he believed it wouldnt charge becasue the usb port broke on the phone but i plugged it in and was able to charge it but it would not power on i was able to get to the boot loader where i could go into recovery mode but now it will only let me get to that downloading screen you go into for odin i tried to flash the rom but no luck and since the phone wont turn on i cannot set it to usb debugging mode and root the device to try installing a custom rom does anyone have any advice as to what might be wrong or what i might do to fix it?
The longest sentence ever, or question.
Tapatapatap Note 2
lef149 said:
A friend had this note two and he believed it wouldnt charge becasue the usb port broke on the phone but i plugged it in and was able to charge it but it would not power on i was able to get to the boot loader where i could go into recovery mode but now it will only let me get to that downloading screen you go into for odin i tried to flash the rom but no luck and since the phone wont turn on i cannot set it to usb debugging mode and root the device to try installing a custom rom does anyone have any advice as to what might be wrong or what i might do to fix it?
Click to expand...
Click to collapse
the best advice in your case would be to edit your post - insert commas and dots.
in download mode flash stock rom via odin. you can try different versions of Odin.
give more info
yaro666 said:
the best advice in your case would be to edit your post - insert commas and dots.
in download mode flash stock rom via odin. you can try different versions of Odin.
give more info
Click to expand...
Click to collapse
I've tried that with multiple roms. I have even tried to install a custom ROM by I don't think USB debugging was turned only. I checked the volts on the battery they are fine. It won't do anything unless it is plugged into something via USB. After every attempt with Odin it either did absolutely nothing or only be to restore or, where I'm a now, stuck on the galaxy note 2 screen and does nothing.
hello
thuantien1706 said:
hello
Click to expand...
Click to collapse
Hello
I got the note 2 to go to the note 2 screen but it stops after that and goes to the battery charging screen.
I need help, my ZF2 suddenly cannot be detected by my windows 7 laptop and pc. When I tried to plug in usb 3 port, it wont get detected. If in usb 2/1 port, it will be detected but with the yellow exclamation mark. I tried updating mtp but it wont update (shows device is up to date). I tried reinstalling ROM and factory reset thru the ROM, but still not working.
I returned to stock but still it wont get detected on my pc or laptop. I ****ed everthing up when I returned to stock since I cant root it back anymore since it wont get detected by adb.
Evereything is up to date including 15sec adb installer 1.4.2 or 1.4.3 and intel usb driver 1.10 from 1.9.
I will try to reformat thru stock recovery and see if it will work. But before doing that, any suggestion or ideas?
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
FrameCall said:
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
Click to expand...
Click to collapse
Yes, it charged when I plugged it on different port. And yes, I have tried different cables, samsung, asus and dont know brand chords. All cables only shows usb device malfunction code 43 and all charged my phone when plugged to ports.
Anybody? Suggestions? Ideas?
Anyone?
Can you check and see if fast charging works?
24imelqui said:
Anyone?
Click to expand...
Click to collapse
Which recovery you installed?
trinimike100 said:
Can you check and see if fast charging works?
Click to expand...
Click to collapse
Fast charging dont work anymore. It will take atleast 2 hrs to charge the phone.
mr_gourav2000 said:
Which recovery you installed?
Click to expand...
Click to collapse
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
24imelqui said:
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
Click to expand...
Click to collapse
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
mr_gourav2000 said:
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Click to expand...
Click to collapse
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
24imelqui said:
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
Click to expand...
Click to collapse
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
mr_gourav2000 said:
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
Click to expand...
Click to collapse
Still usb device malfunction code 43. Thanks man
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Abhishek1108 said:
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Click to expand...
Click to collapse
j4nitor said:
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Click to expand...
Click to collapse
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
trinimike100 said:
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
Click to expand...
Click to collapse
I went to a 3rd party repairman and he said he just replaced the flex data cable or something like that, he also said it is common for zenfone smartphone. Then my phone is detectable again.
Hello XDA universe, I need some help to fix my Dead Samsung Galaxy Note 2 (N7100).
In Elaboration, My N7100 was working fine 7 days ago, and I was using CM12.1 on it for over a year, I decided to install CM13 on it, I did the same, first boot was successful, phone booted up like always, then I plugged the charger in and performed a restart, but I didn't boot after that,
Now, I'm left with No display, No Recovery, No Download Mode and No Hope.
I tried using the USB JIG method to get into the download mode, but failed, maybe I didn't do it right,
Please help me out, It was my Mom's personal phone, and I have heard a million scoldings for doing this....
Please somebody help me....?
Do you see the charging screen or charging LED when connected to a charger?
No
audit13 said:
Do you see the charging screen or charging LED when connected to a charger?
Click to expand...
Click to collapse
Sir, thanks for replying, It did that on the very first incident, now it's good as dead.
Please tell me how to recover it.
When the phone is connected to a charger, does the phone get warm? If yes, it could be charging.
To use the jig, remove the battery, insert the jig, insert the battery. The phone should automatically vibrate and boot into download mode. About 15 seconds after inserting the battery, remove the jig, connect the phone to a computer, and see if it shows up under devices.
Vaibhav Puri said:
Hello XDA universe, I need some help to fix my Dead Samsung Galaxy Note 2 (N7100).
In Elaboration, My N7100 was working fine 7 days ago, and I was using CM12.1 on it for over a year, I decided to install CM13 on it, I did the same, first boot was successful, phone booted up like always, then I plugged the charger in and performed a restart, but I didn't boot after that,
Now, I'm left with No display, No Recovery, No Download Mode and No Hope.
I tried using the USB JIG method to get into the download mode, but failed, maybe I didn't do it right,
Please help me out, It was my Mom's personal phone, and I have heard a million scoldings for doing this....
Please somebody help me....
Click to expand...
Click to collapse
Well hello everyone i got a nearly new note 7 n930f with its box and all for about 130$ but the owner had let it update and now it only works while plugged to a charger, i tried getting into download mode while on charger but nothing happened just a black screen and sometimes it just boots up guess because the battery is at 0%.. i own a repair shop and i have a z3x box if nessecary.. i thought of opening it and charge the battery separatly or use s7 one but i really don't want to lose water resistance. But since i can get to use the phone i thought maybe i can root it using kingroot or sth and get system file and modify something so i can charge it a bit to get into download mode to flash twrp and costume rom but i'm not that good with sys files or mobile odin to downgrade to 30% battery firmware or sth.. i'm really stuck and i contacted samsung and they didn't want to take it back since it's purchased from another country (in europe)
Please anyone who has any solution help me.. i really love this phone and it was my dream phone when it launched
I did it guys, although no one has replied xD!.. after a lot of research, the way was to power on phone while on charger, check oem unluck then power off, plug usb into pc and do the download mode sequence 5 times with 3sec-1sec interval then flashed twrp and flash hydra kernel, it let it charge to 60%, after that anything can be done.. i'm on note fe oreo port btw!
Nebula.Inc said:
I did it guys, although no one has replied xD!.. after a lot of research, the way was to power on phone while on charger, check oem unluck then power off, plug usb into pc and do the download mode sequence 5 times with 3sec-1sec interval then flashed twrp and flash hydra kernel, it let it charge to 60%, after that anything can be done.. i'm on note fe oreo port btw!
Click to expand...
Click to collapse
How did you manage to check OEM. I can only get to download mode while charging and not through USB. My phone is not getting recongnized using USB. Pretty much stuck. Can you/someone help?
arunachudh said:
How did you manage to check OEM. I can only get to download mode while charging and not through USB. My phone is not getting recongnized using USB. Pretty much stuck. Can you/someone help?
Click to expand...
Click to collapse
I could turn on the phone only with original charger and waiting for about a minute then by going to recovery mode then select "reboot phone".. it boots up then go to developer mode and check oem unlock and flash twrp and no verity opt then hydra rom or something
I'm having similar problems, but mine won't go let me into the recovery menu. Does anyone have any useful tips for me? Can anyone elaborate on the concept of the 3-1 second thing? thanks in advance for all the help!