Related
Hi I was able to root my tmobile gn2 using a guide which worked perfectly fine. But I wanted to unroot my phone but due to incomplete research and knowledge my phone is now bricked. The guide i followed didn't specifically mention regarding US carriers so I went ahead and tried to unroot with other GT-7100 firmwares available and when I tried to flash with ODIN i kept getting failures and now it is stuck in the "firmware upgrade encountered an issure. Please select recovery mode in Kies & try again". I tried it was just an error with the firmware so i tried another one, but nonetheless it failed and somehow my binary count went up to 3.
I tried going into recovery but it doesn't work, but I am still able to get into the ODIN download screen.
I'm not really sure what to do at this point.
I would really appreciate any help
Did you try the method here?
http://forum.xda-developers.com/showthread.php?t=1957209
Just download that rom and follow the steps to install it. Hopefully that works for you.
Sent from my SGH-T889 using Tapatalk 2
---------- Post added at 04:54 PM ---------- Previous post was at 04:52 PM ----------
Since tmo galaxy note 2 has its own forum only download roms or any other firmwares from there so you do not risk bricking yoyr device.
Sent from my SGH-T889 using Tapatalk 2
minhajmsd said:
Did you try the method here?
http://forum.xda-developers.com/showthread.php?t=1957209
Just download that rom and follow the steps to install it. Hopefully that works for you.
Sent from my SGH-T889 using Tapatalk 2
---------- Post added at 04:54 PM ---------- Previous post was at 04:52 PM ----------
Since tmo galaxy note 2 has its own forum only download roms or any other firmwares from there so you do not risk bricking yoyr device.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
I actually did look through the thread but I was too afraid to do anything else since I might make my situation worse, but I think I might go ahead and try it.
I just follow the same procedure right? download the zip file and flash it with odin?
Flash CWM Recovery with odin. Once that is done flash rom through the recovery.
Sent from my SGH-T889 using Tapatalk 2
---------- Post added at 05:17 PM ---------- Previous post was at 05:16 PM ----------
You have to add the rom file to your sdcard first though
Sent from my SGH-T889 using Tapatalk 2
would i need a microsd adapter for that since im not able to do it through my phone?
xquie said:
would i need a microsd adapter for that since im not able to do it through my phone?
Click to expand...
Click to collapse
No need sdcard when you flash through PC and that is only option for you now.
What exactly your phone model ?
simplelife said:
No need sdcard when you flash through PC and that is only option for you now.
What exactly your phone model ?
Click to expand...
Click to collapse
Tmobile SGH-T889
So the method minhajmsd mentioned earlier isn't an option for me?
xquie said:
Tmobile SGH-T889
Click to expand...
Click to collapse
You can try this
http://forum.xda-developers.com/showthread.php?t=1957209
simplelife said:
You can try this
http://forum.xda-developers.com/showthread.php?t=1957209
Click to expand...
Click to collapse
ah sorry im really new to this so im a bit confused. My phone got bricked while attempting to unroot..
and i happened to notice the method you provided me was to "root" -- so if I reroot it, will it get me out of brick?
--------
I actually just flashed recovery with ODIN and my phone booted but my phone detects no service...
any idea what i should do next?
xquie said:
ah sorry im really new to this so im a bit confused. My phone got bricked while attempting to unroot..
and i happened to notice the method you provided me was to "root" -- so if I reroot it, will it get me out of brick?
--------
I actually just flashed recovery with ODIN and my phone booted but my phone detects no service...
any idea what i should do next?
Click to expand...
Click to collapse
Try to flash TMO modem to see if get back the network. http://forum.xda-developers.com/showthread.php?t=1957380
In the mean time, can you check on your still have SuperSu app and method I try on the other post are reflash stock rom to get you back on feet,not reroot .Since you can boot your phone but no network then flash modem first to see if it's work again
simplelife said:
Try to flash TMO modem to see if get back the network. http://forum.xda-developers.com/showthread.php?t=1957380
In the mean time, can you check on your still have SuperSu app
Click to expand...
Click to collapse
I will go ahead and flash the TMO modem thank you!
and yes I still do have Supersu
xquie said:
I will go ahead and flash the TMO modem thank you!
and yes I still do have Supersu
Click to expand...
Click to collapse
Ok.let me know how it go.good luck
1 download modem save into excard
2 turn off phone.hold home + volunm up 1st then hold power together about 5 second will put your note into CWM
3 from CWM . Install from excard.modem file..intall.yes.
4 reboot system.done
simplelife said:
Ok.let me know how it go.good luck
Click to expand...
Click to collapse
I was reading the directions and then I realized I am not 100% sure how to flash through custom recovery.
Do I add the tmo modem into my sdcard and open rom manager and reboot to recovery?
xquie said:
I was reading the directions and then I realized I am not 100% sure how to flash through custom recovery.
Do I add the tmo modem into my sdcard and turn off my phone. then press the vol up + center home + power to go into recovery mode?
Click to expand...
Click to collapse
Yes .you need to save in sdcard but remember where so you can get and follow my last post instructions.
simplelife said:
Yes .you need to save in sdcard but remember where so you can get and follow my last post instructions.
Click to expand...
Click to collapse
I just flashed the modem through cwm but i still don't have connection.
Was I suppose to do a data wipe/factory reset before i flash it or it doesnt matter?
Should i go straight to flashing the SGH-T889 Stock Deodexed UVALJ1 through cwm?
xquie said:
I just flashed the modem through cwm but i still don't have connection.
Was I suppose to do a data wipe/factory reset before i flash it or it doesnt matter?
Should i go straight to flashing the SGH-T889 Stock Deodexed UVALJ1 through cwm?[/QUOTE
Go to setting. About phone .check baseband and version.status check imec and network.reboot CWM wipe data.cach.davik.reboot.
If still no go. Flash stock rom
Click to expand...
Click to collapse
Go to setting. About phone .check baseband and version.status check imec and network.reboot CWM wipe data.cach.davik.reboot.
If still no go. Flash stock rom
Click to expand...
Click to collapse
basband version: unknown
android version: 4.1.1
build: JRO03C.T889UVALJ1
imei: unknown
are these okay?
xquie said:
basband version: unknown
android version: 4.1.1
build: JRO03C.T889UVALJ1
imei: unknown
are these okay?
Click to expand...
Click to collapse
No.it not. You still dont have modem and imei
You need to flash the stock rom to get your imei back after that flash the modem
Here what you need to do
Download stock rom & modem save inyo excard
Put into CWM .full wipe
Flash rom
Reboot into recovery not reboot systems
Flash modem.
Reboot system.done
simplelife said:
No.it not. You still dont have modem and imei
You need to flash the stock rom to get your imei back after that flash the modem
Did you flash N7100 rom before this happen ?
Click to expand...
Click to collapse
i didn't flash the stock rom, but i did try to flash other N7100 from other countries in an attempt to unroot.
simplelife said:
No.it not. You still dont have modem and imei
You need to flash the stock rom to get your imei back after that flash the modem
Here what you need to do
Download stock rom & modem save inyo excard
Put into CWM .full wipe
Flash rom
Reboot into recovery not reboot systems
Flash modem.
Reboot system.done
Click to expand...
Click to collapse
I just flashed the stock rom and its working now!!
wow thank you for guiding me through this and being so patient with me!! :good:
thank you so much!
Hi I installed SwapSD on my sgh-m919v Galaxy S4 from Videotron but it totally screwed up my phone.. Now I get ''mtp has stopped'' ''settings has stopped'' and ''android.process.media has stopped'' each time I start the phone. I've been looking for the stock rom for my specific model (SGH-M919V) for hours but can't find it anywhere. I tried using SGH-M919 stock rom but it won't work even if I strictly follow the guide, ODIN tells me FAIL!! (Auth).. Could someone upload the stock rom for that specific model somewhere and give me the link please ?
I attached a screen capture from odin to show you what problem i get
Thank you
elektronick2010 said:
Hi I installed SwapSD on my sgh-m919v Galaxy S4 from Videotron but it totally screwed up my phone.. Now I get ''mtp has stopped'' ''settings has stopped'' and ''android.process.media has stopped'' each time I start the phone. I've been looking for the stock rom for my specific model (SGH-M919V) for hours but can't find it anywhere. I tried using SGH-M919 stock rom but it won't work even if I strictly follow the guide, ODIN tells me FAIL!! (Auth).. Could someone upload the stock rom for that specific model somewhere and give me the link please ?
I attached a screen capture from odin to show you what problem i get
Thank you
Click to expand...
Click to collapse
I have this stock roms i just need to post it and it nearly 2Gb.
---------- Post added at 08:20 PM ---------- Previous post was at 08:13 PM ----------
do you have TWRP installed because the thing i have is a backup i did from that software. i dont know if it that you need.
elektronick2010 said:
Hi I installed SwapSD on my sgh-m919v Galaxy S4 from Videotron but it totally screwed up my phone.. Now I get ''mtp has stopped'' ''settings has stopped'' and ''android.process.media has stopped'' each time I start the phone. I've been looking for the stock rom for my specific model (SGH-M919V) for hours but can't find it anywhere. I tried using SGH-M919 stock rom but it won't work even if I strictly follow the guide, ODIN tells me FAIL!! (Auth).. Could someone upload the stock rom for that specific model somewhere and give me the link please ?
I attached a screen capture from odin to show you what problem i get
Thank you
Click to expand...
Click to collapse
Not sure if you got what you needed but you can take the phone back to stock using Samsung Kies, just plug the phone in download mode select "tools" then "Firmware upgrade and initialization", input your phones info and off you go..
if you could also grab the rom downloaded by Kies and uploaded for us that'd be cool.
gillesguinet said:
Not sure if you got what you needed but you can take the phone back to stock using Samsung Kies, just plug the phone in download mode select "tools" then "Firmware upgrade and initialization", input your phones info and off you go..
if you could also grab the rom downloaded by Kies and uploaded for us that'd be cool.
Click to expand...
Click to collapse
Unfortunately reverting back to stock with Kies has not worked for me either with that method.
Hopefully the stock firmware for this carrier will drop soon!
Bump
I too would like the stock firmware for this device before I start tinkering with it.
I am surprised however that odin fails while flashing the sgh-m919 firmware. I thought these devices were essentially the same.
Have you fixed your phone yet, and how so?
+1
I've soft bricked my phone and would really appreciate a stock m919V firmware. I've installed a bad kernel and/or rom and even the partitions are all screwed up. Nothing to do without a m919v odin flashable image.
Anybody?
dj_aj said:
I too would like the stock firmware for this device before I start tinkering with it.
I am surprised however that odin fails while flashing the sgh-m919 firmware. I thought these devices were essentially the same.
Have you fixed your phone yet, and how so?
Click to expand...
Click to collapse
sorinmtl said:
+1
I've soft bricked my phone and would really appreciate a stock m919V firmware. I've installed a bad kernel and/or rom and even the partitions are all screwed up. Nothing to do without a m919v odin flashable image.
Anybody?
Click to expand...
Click to collapse
Sent in a request to samfirmware.com & samsung-updates.com to post the firmware. Hoping that they consider the request.
Maybe you could do the same? I'm not asking to spam them, but I suppose it'll have an impact if there's more than 1 person requesting the firmware.
sorinmtl said:
+1
I've soft bricked my phone and would really appreciate a stock m919V firmware. I've installed a bad kernel and/or rom and even the partitions are all screwed up. Nothing to do without a m919v odin flashable image.
Anybody?
Click to expand...
Click to collapse
So, in my last post, I had mentioned that I had contacted samfirmware.com to post the stock firmware. They've responded to my request and already uploaded the firmware!
Posted the link here:
http://forum.xda-developers.com/showthread.php?p=42001570#post42001570
Good luck flashing it back to stock and reviving your S4.
Awesome. I'm downloading right not, but since I'm not a paid member on hotfile I'll only know in an hour if it works. I'll keep everybody posted, hopefully I'll be able to flash it with odin.
I'm also wondering what the no-name firmware on sammobile is. They posted the videotron, wind, and mobilcity firmwares. Is the no-name one unbranded? We'll have to wait and see.
So I downloaded the videotron firmware and it worked. Everything is back.
I'll try the unbranded version to see what it does.
Did you install the stock firmware using the stock recovery?
sorinmtl said:
So I downloaded the videotron firmware and it worked. Everything is back.
I'll try the unbranded version to see what it does.
Click to expand...
Click to collapse
Glad to hear it, keep us posted if you flash that unbranded firmware. Hoping it frees up some internal storage.
---------- Post added at 03:12 PM ---------- Previous post was at 03:11 PM ----------
speed4134 said:
Did you install the stock firmware using the stock recovery?
Click to expand...
Click to collapse
I believe he would have flashed the stock firmware using Odin for Windows. At least that's how it is normally done.
I just downloaded the videotron firmware from the website, I didn't flash the recovery. It's .md5 format, so I've flashed it with Odin. The phone was on CWM recovery, but it doesn't really matter as the firmware flashes the stock recovery too.
So I just flashed the videotron image in odin, phone rebooted and everything is fine, I'm back to stock, including no root and stock recovery. The only thing that's still there is the fact that phone is unlocked. (I've used the method described in the forum to unlock it).
As for the other firmware, it has _ESK in the name. I'm 99.9999% sure it's Eastlink firmware, another mobile carrier in Canada. The other ones had _VTR and so on in their name.
thanks for the info
Hotfile is down
I'm looking for a factory image of any of the MDJ builds.... Hotfile is down so I can't get it... does anybody have a copy that they would be willing to upload for me.... I need it so I can reset and sell this phone ASAP to get christmas money. Thanks
Hi,
I have a Samsung Galaxy Note 2 on the Rogers network in Canada. I rooted my phone and then realized that supersu was not working. I dont loaded rom manager to install the latest version of CWM but realized that my version of software wasnt on the list. I selected a version that was close to mine but the install could not be completed. Anyways when I finally realized what I was doing and I needed to get my phone into recovery mode to install the lastest version on Supersu which I downloaded I could not do so. For some reason I kept getting a flashing Samsung Galaxy Note 2. See link. https://www.youtube.com/watch?v=4_hFpRBWqZ8
How do I fix this issue and get my phone into recovery mode? I need to install the lastest version of Supersu via CWM to have my root working correctly.
I was also wondering if I can just try to root my phone again via odin?
I am a newbie, just looking for answers.
You must know if you own a N7100 or t0lte and if the bootloader is locked or not. Here in Europe Note 2 is generally sold with unlocked bootloaders, but not so in the USA/Canada.
After that we should mind following: if the OS is corrupted now by uncompleted flashing process, you may better flash either a full stock firmware with Odin- or flash only a custom recovery with Odin. However, now you must really know is it a N7100 or t0lte
tetakpatalked from Nexus 7 flo
Appreciate Suggestions !
tetakpatak said:
You must know if you own a N7100 or t0lte and if the bootloader is locked or not. Here in Europe Note 2 is generally sold with unlocked bootloaders, but not so in the USA/Canada.
After that we should mind following: if the OS is corrupted now by uncompleted flashing process, you may better flash either a full stock firmware with Odin- or flash only a custom recovery with Odin. However, now you must really know is it a N7100 or t0lte
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Hello Sir,
I have GT-N7100 ( Samsung Galaxy Note 2 ) 4.4.2 KitKat ! I recently tried to root my device with Odin odin3 v1.85 ( cwm6-root-note2 ) and got the pass.
Then I was not able to use SU ( Which was already pre-installed by me before rooting from play store ) Also it give the message "There is no SU binary installed and SuperSU cannot install it".
Also I cannot go to CWM Recovery mode by Pressing Vol Up + Home Button + Power Button as screen go mad and switch it off, Then I need to start it again to use my phone normally.
I have installed an app from Play Store named Root Checker which verify if phone is rooted or not and it say "Root Access is not properly configured or was not granted".
Thanks to god my phone is still working but I still wish to Root My phone again with correct process !
Q. Can I still Re-Root My phone ? If Yes, Then please guide me through latest correct process with files.
Q. I wish to root and install CWM Recovery again ( Which I tried before which has not properly configured )
Thanks
Have a nice day
@Ashish Gaur you have to flash any custom recovery and after that to install UPDATE-SuperSU-v2.02.zip in recovery
tetakpatalked from Nexus 7 flo
THANKS !!!
tetakpatak said:
@Ashish Gaur you have to flash any custom recovery and after that to install UPDATE-SuperSU-v2.02.zip in recovery
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Hi....
I valued your quick reply and suggestion.But, from other thread I have already solved the issue and now my phone is rooted with philzRecovery!!
I hope to seek help from you in future and thanks a ton once again....Have a nice week!!!!
Cheers!!
My note 2 is a rogers model SGH-1317M. I am not sure whats going on with my phone but I can get my phone into recover mode. When I try to open SuperSu it says there in no SU binary installed and SuperSu cannot install it. This is a problem.
Someone please help if they found a solution to this problem.
Reroot using pc odin......then flash custom recovery.....and done
devrog17 said:
Reroot using pc odin......then flash custom recovery.....and done
Click to expand...
Click to collapse
Can I get detailed instructions on how to do this? I am a bit of a novice lol
clifari said:
Can I get detailed instructions on how to do this? I am a bit of a novice lol
Click to expand...
Click to collapse
See..first check if ur device has a locked bootloader. .....if it is locked u have to get that bootloader (u have to flash the rom officially for rogers).....
If u have an unlocked device...then do this
Search for the latest cf auto root for ur device
Get odin and stock rom (urs or rogers one (if locked))
Flash the rom
Flash cf auto root
And u hve a rooted stock device....that will go in recovery too
---------- Post added at 09:23 PM ---------- Previous post was at 09:20 PM ----------
If it does not work then either give the device to Samsung. .....or try usb jig (google it)
devrog17 said:
See..first check if ur device has a locked bootloader. .....if it is locked u have to get that bootloader (u have to flash the rom officially for rogers).....
If u have an unlocked device...then do this
Search for the latest cf auto root for ur device
Get odin and stock rom (urs or rogers one (if locked))
Flash the rom
Flash cf auto root
And u hve a rooted stock device....that will go in recovery too
---------- Post added at 09:23 PM ---------- Previous post was at 09:20 PM ----------
If it does not work then either give the device to Samsung. .....or try usb jig (google it)
Click to expand...
Click to collapse
Here it is...My phone is unlocked and it is note 2 model SGH-1317M. I am trying to google the stuff that you told me to look for but there is so much info that I am scared that I am going to make a mistake. Would it be possible for you to provide links beside each step. I will be eternally grateful. I do understand if you can and I appreciate all your help so far.
First tell me could you use other sims on ur device(other than Rogers)
clifari said:
My note 2 is a rogers model SGH-1317M. I am not sure whats going on with my phone but I can get my phone into recover mode. When I try to open SuperSu it says there in no SU binary installed and SuperSu cannot install it. This is a problem.
Someone please help if they found a solution to this problem.
Click to expand...
Click to collapse
Read post #4
tetakpatalked from N7100
devrog17 said:
First tell me could you use other sims on ur device(other than Rogers)
Click to expand...
Click to collapse
Yes, I can...My phone was unlocked before I tried to root my phone.
devrog17 said:
See..first check if ur device has a locked bootloader. .....if it is locked u have to get that bootloader (u have to flash the rom officially for rogers).....
If u have an unlocked device...then do this
Search for the latest cf auto root for ur device
Get odin and stock rom (urs or rogers one (if locked))
Flash the rom
Flash cf auto root
And u hve a rooted stock device....that will go in recovery too
---------- Post added at 09:23 PM ---------- Previous post was at 09:20 PM ----------
If it does not work then either give the device to Samsung. .....or try usb jig (google it)
Click to expand...
Click to collapse
Thanks a lot for all your help. It took me a few days to do all the research but it was well worth it. I followed your instructions and I am now able to put my phone in to recovery mode. I am not sure if my phone is rooted as when I try to open SuperSu it say it has stopped working. Any ideas on what I should do?
Reroot.....and don't open su....go to play store and update it first then open.....cheers...
DO HIT THAT THANKS BUTTON IF U FEEL I TRIED TO HELP U
clifari said:
Thanks a lot for all your help. It took me a few days to do all the research but it was well worth it. I followed your instructions and I am now able to put my phone in to recovery mode. I am not sure if my phone is rooted as when I try to open SuperSu it say it has stopped working. Any ideas on what I should do?
Click to expand...
Click to collapse
You have to flash superSU zip in recovery, as I wrote in the post #4
tetakpatalked from N7100
tetakpatak said:
You have to flash superSU zip in recovery, as I wrote in the post #4
tetakpatalked from N7100
Click to expand...
Click to collapse
I downloaded twrp for the play store and I cant use it as it says it requires root access. I thought my phone was rooted as I used CF- Auto root and all worked out well. I kept getting an error saying unfortunately SuperSu has stopped. I dont know what to do now. I was going to use twrp to flash SuperSu update.
How should I proceed?
clifari said:
I downloaded twrp for the play store and I cant use it as it says it requires root access. I thought my phone was rooted as I used CF- Auto root and all worked out well. I kept getting an error saying unfortunately SuperSu has stopped. I dont know what to do now. I was going to use twrp to flash SuperSu update.
How should I proceed?
Click to expand...
Click to collapse
TWRP from the Play Store??
Android-Andi has compiled TWRP and PhilZ for all Tab 2 models. You should flash any recent recovery as a tar file in download mode with Odin
tetakpatalked from N7100
tetakpatak said:
TWRP from the Play Store??
Android-Andi has compiled TWRP and PhilZ for all Tab 2 models. You should flash any recent recovery as a tar file in diwnliad mide with Odin
tetakpatalked from N7100
Click to expand...
Click to collapse
ok...can you point me in the right direction. My phone is a note 2 SGH-I317M. I think my phone is rooted as i used the latest cf auto root for my device and it worked out fine. When ever i activate my phone from sleep mode, I get an error message say SuperSu unfortunately has stopped.
Can you give me detailed instructions and maybe links to slove this issue? I am very grateful for all your help so far.
clifari said:
ok...can you point me in the right direction. My phone is a note 2 SGH-I317M. I think my phone is rooted as i used the latest cf auto root for my device and it worked out fine. When ever i activate my phone from sleep mode, I get an error message say SuperSu unfortunately has stopped.
Can you give me detailed instructions and maybe links to slove this issue? I am very grateful for all your help so far.
Click to expand...
Click to collapse
As you use Tab 3, you are here in wrong thread, that is in help section for Tab 2.
Please use search function and you'll find proper threads within seconds. All details are there.
tetakpatalked from N7100
Trying to revert back to stock official firmware on the N5110. I am using Odin and the correct firmware file found on SamMobile, N5110XXDNE1. I am only getting to samsung logo and then it's stuck. won't boot.
i am having thev same problem!
any help will be greatly appreciated!
andreadrubin said:
any help will be greatly appreciated!
Click to expand...
Click to collapse
What is your region, if it's US, I can help you with Bootloader and CSC files, if only flash the AP file your tablet might not able to boot.
Normally , I will load these 3 files in Odin and it rarely fails to boot.
BL_N5110UEU2CNE2_1498778_REV01_user_low_ship.tar.md5
AP_N5110UEU2CNE2_1498778_REV01_user_low_ship.tar.md5
CSC_XAR_N5110XAR2CNE2_1498778_REV01_user_low_ship.tar.md5
---------- Post added at 05:10 AM ---------- Previous post was at 04:51 AM ----------
ulriks9 said:
Trying to revert back to stock official firmware on the N5110. I am using Odin and the correct firmware file found on SamMobile, N5110XXDNE1. I am only getting to samsung logo and then it's stuck. won't boot.
Click to expand...
Click to collapse
Try again with the BootLoader (BL ) and AP file, don't use the CSC as it for US region
http://www.mediafire.com/download/bkek225c33c5sw2/GT-N5110.rar
I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
canussie said:
I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
Click to expand...
Click to collapse
KERNEL IS NOT SEANDROID ENFORCING ---> its not error and not important just a message that you use Custome Kernel or Recovery.
Go to Recovery and do Wiping (Cache,Data,All) and reboot it should boot.
if not download latest ROM (PD3 or PD2) and flash using ODin
mahdi72 said:
KERNEL IS NOT SEANDROID ENFORCING ---> its not error and not important just a message that you use Custome Kernel or Recovery.
Go to Recovery and do Wiping (Cache,Data,All) and reboot it should boot.
if not download latest ROM (PD3 or PD2) and flash using ODin
Click to expand...
Click to collapse
I tried recovery, that didn't work. I have not tried PD3 or PD2 ROM, I will try that and see how it goes.
canussie said:
I tried recovery, that didn't work. I have not tried PD3 or PD2 ROM, I will try that and see how it goes.
Click to expand...
Click to collapse
OK, I have found a few different ROMs, what would the filename of the PD2 or PD3 ROM be for the SM-G920p?
canussie said:
OK, I have found a few different ROMs, what would the filename of the PD2 or PD3 ROM be for the SM-G920p?
Click to expand...
Click to collapse
PD3 or PD2 is BuildNumber.PD2 released and after flashing that you can take PD3 from OTA Update. PD2 is based on Android 6.0.1
http://samsung-updates.com/details/65838//SM-G920P/SPR/G920PVPS3CPD2.html
Saafir said:
You can download both PD2 or PD3 from this thread so you don't have throttled download. Are you using Sprint for service, since you say its an unlocked device?
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
No, I am not using sprint . I am using Telstra in Australia.
Saafir said:
You can download both PD2 or PD3 from this thread so you don't have throttled download. Are you using Sprint for service, since you say its an unlocked device?
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
And also.. thank you for your help .
canussie said:
And also.. thank you for your help .
Click to expand...
Click to collapse
I flashed PD2, it goes further than it did before... instead of stopping at the Samsung Galaxy S6 logo, it now goes straight to the android recovery screen. Attached is the screenshot. I am downloading PD3 and will try that next.
canussie said:
I flashed PD2, it goes further than it did before... instead of stopping at the Samsung Galaxy S6 logo, it now goes straight to the android recovery screen. Attached is the screenshot. I am downloading PD3 and will try that next.
Click to expand...
Click to collapse
Update. Looks like I get the same results with PD3.
Saafir said:
Can you look on the back of your device, on the bottom and confirm it is SM-G920P please
Click to expand...
Click to collapse
Sure is .
SM-G920P.
Saafir said:
You will have to search for a guide to get this device back working on your carrier. I'm not very familiar with using unlocked devices on other carriers. I myself would take it back to the place of purchase. Perhaps someone else will jump in with better knowledge. @koop1955
Click to expand...
Click to collapse
Thanks for the advice, I bought it in Canada, I am now in Australia and not going back to Canada anytime soon.
canussie said:
And also.. thank you for your help .
Click to expand...
Click to collapse
I have never experienced this (only occurs on phones outside the US) and can't offer you a direct solution, but this person seems to have solved the same problem on the Edge model using a toolkit:
https://www.youtube.com/watch?v=HlMQQPpqELI
Hope this helps you.
U must have tried to install a custom recovery or a kernel try to drain s6 battery to 0% to do that go into odin mode let it sit and turn off automatically. .when off plug in charger..charge to about 5% first go into recovery wipe data n cache restart ur phone ...simple restarting the phone wont help ya..if this doesnt help u try installing 5.11 BOL1 stock rom...n then drain it 0% repeat the procedure
Sent from my LG-H815 using XDA-Developers mobile app
canussie said:
I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
Click to expand...
Click to collapse
DRK no longer
---------- Post added at 09:50 PM ---------- Previous post was at 09:47 PM ----------
I bet everything you lost imei and DRK baneband and more
Hieu vn said:
DRK no longer
---------- Post added at 09:50 PM ---------- Previous post was at 09:47 PM ----------
I bet everything you lost imei and DRK baneband and more
Click to expand...
Click to collapse
Agreed
anderd said:
Agreed
Click to expand...
Click to collapse
Ok, any tips on how to restore this?
canussie said:
Ok, any tips on how to restore this?
Click to expand...
Click to collapse
Im sure there's a solution that doesn't require a box, but im not aware of it at the moment, If the IMEI/MEID is gone, you'll have to find someone who can repair that, and most claim their repairs only fix the GSM side (IMEI) and doesn't write a new clean sprint MEID to the device. In the end, it may end up being easier to replace the device and sell the current one for parts. If you only need GSM service, then im sure someone, either on here, or another forum, or a auction site, could help you for a fee. Thats all i can suggest at the moment.
mahdi72 said:
PD3 or PD2 is BuildNumber.PD2 released and after flashing that you can take PD3 from OTA Update. PD2 is based on Android 6.0.1
http://samsung-updates.com/details/65838//SM-G920P/SPR/G920PVPS3CPD2.html
Click to expand...
Click to collapse
PD2 Workedfor me thanks...
try flashing new kernel