Bootloop - Galaxy Note 8.0 (Tablet) Q&A, Help & Troubleshooti

Trying to revert back to stock official firmware on the N5110. I am using Odin and the correct firmware file found on SamMobile, N5110XXDNE1. I am only getting to samsung logo and then it's stuck. won't boot.

i am having thev same problem!
any help will be greatly appreciated!

andreadrubin said:
any help will be greatly appreciated!
Click to expand...
Click to collapse
What is your region, if it's US, I can help you with Bootloader and CSC files, if only flash the AP file your tablet might not able to boot.
Normally , I will load these 3 files in Odin and it rarely fails to boot.
BL_N5110UEU2CNE2_1498778_REV01_user_low_ship.tar.md5
AP_N5110UEU2CNE2_1498778_REV01_user_low_ship.tar.md5
CSC_XAR_N5110XAR2CNE2_1498778_REV01_user_low_ship.tar.md5
---------- Post added at 05:10 AM ---------- Previous post was at 04:51 AM ----------
ulriks9 said:
Trying to revert back to stock official firmware on the N5110. I am using Odin and the correct firmware file found on SamMobile, N5110XXDNE1. I am only getting to samsung logo and then it's stuck. won't boot.
Click to expand...
Click to collapse
Try again with the BootLoader (BL ) and AP file, don't use the CSC as it for US region
http://www.mediafire.com/download/bkek225c33c5sw2/GT-N5110.rar

Related

Need Stock Firmware/ROM for Glaxy S4 SGH-M919V (Videotron)

Hi I installed SwapSD on my sgh-m919v Galaxy S4 from Videotron but it totally screwed up my phone.. Now I get ''mtp has stopped'' ''settings has stopped'' and ''android.process.media has stopped'' each time I start the phone. I've been looking for the stock rom for my specific model (SGH-M919V) for hours but can't find it anywhere. I tried using SGH-M919 stock rom but it won't work even if I strictly follow the guide, ODIN tells me FAIL!! (Auth).. Could someone upload the stock rom for that specific model somewhere and give me the link please ?
I attached a screen capture from odin to show you what problem i get
Thank you
elektronick2010 said:
Hi I installed SwapSD on my sgh-m919v Galaxy S4 from Videotron but it totally screwed up my phone.. Now I get ''mtp has stopped'' ''settings has stopped'' and ''android.process.media has stopped'' each time I start the phone. I've been looking for the stock rom for my specific model (SGH-M919V) for hours but can't find it anywhere. I tried using SGH-M919 stock rom but it won't work even if I strictly follow the guide, ODIN tells me FAIL!! (Auth).. Could someone upload the stock rom for that specific model somewhere and give me the link please ?
I attached a screen capture from odin to show you what problem i get
Thank you
Click to expand...
Click to collapse
I have this stock roms i just need to post it and it nearly 2Gb.
---------- Post added at 08:20 PM ---------- Previous post was at 08:13 PM ----------
do you have TWRP installed because the thing i have is a backup i did from that software. i dont know if it that you need.
elektronick2010 said:
Hi I installed SwapSD on my sgh-m919v Galaxy S4 from Videotron but it totally screwed up my phone.. Now I get ''mtp has stopped'' ''settings has stopped'' and ''android.process.media has stopped'' each time I start the phone. I've been looking for the stock rom for my specific model (SGH-M919V) for hours but can't find it anywhere. I tried using SGH-M919 stock rom but it won't work even if I strictly follow the guide, ODIN tells me FAIL!! (Auth).. Could someone upload the stock rom for that specific model somewhere and give me the link please ?
I attached a screen capture from odin to show you what problem i get
Thank you
Click to expand...
Click to collapse
Not sure if you got what you needed but you can take the phone back to stock using Samsung Kies, just plug the phone in download mode select "tools" then "Firmware upgrade and initialization", input your phones info and off you go..
if you could also grab the rom downloaded by Kies and uploaded for us that'd be cool.
gillesguinet said:
Not sure if you got what you needed but you can take the phone back to stock using Samsung Kies, just plug the phone in download mode select "tools" then "Firmware upgrade and initialization", input your phones info and off you go..
if you could also grab the rom downloaded by Kies and uploaded for us that'd be cool.
Click to expand...
Click to collapse
Unfortunately reverting back to stock with Kies has not worked for me either with that method.
Hopefully the stock firmware for this carrier will drop soon!
Bump
I too would like the stock firmware for this device before I start tinkering with it.
I am surprised however that odin fails while flashing the sgh-m919 firmware. I thought these devices were essentially the same.
Have you fixed your phone yet, and how so?
+1
I've soft bricked my phone and would really appreciate a stock m919V firmware. I've installed a bad kernel and/or rom and even the partitions are all screwed up. Nothing to do without a m919v odin flashable image.
Anybody?
dj_aj said:
I too would like the stock firmware for this device before I start tinkering with it.
I am surprised however that odin fails while flashing the sgh-m919 firmware. I thought these devices were essentially the same.
Have you fixed your phone yet, and how so?
Click to expand...
Click to collapse
sorinmtl said:
+1
I've soft bricked my phone and would really appreciate a stock m919V firmware. I've installed a bad kernel and/or rom and even the partitions are all screwed up. Nothing to do without a m919v odin flashable image.
Anybody?
Click to expand...
Click to collapse
Sent in a request to samfirmware.com & samsung-updates.com to post the firmware. Hoping that they consider the request.
Maybe you could do the same? I'm not asking to spam them, but I suppose it'll have an impact if there's more than 1 person requesting the firmware.
sorinmtl said:
+1
I've soft bricked my phone and would really appreciate a stock m919V firmware. I've installed a bad kernel and/or rom and even the partitions are all screwed up. Nothing to do without a m919v odin flashable image.
Anybody?
Click to expand...
Click to collapse
So, in my last post, I had mentioned that I had contacted samfirmware.com to post the stock firmware. They've responded to my request and already uploaded the firmware!
Posted the link here:
http://forum.xda-developers.com/showthread.php?p=42001570#post42001570
Good luck flashing it back to stock and reviving your S4.
Awesome. I'm downloading right not, but since I'm not a paid member on hotfile I'll only know in an hour if it works. I'll keep everybody posted, hopefully I'll be able to flash it with odin.
I'm also wondering what the no-name firmware on sammobile is. They posted the videotron, wind, and mobilcity firmwares. Is the no-name one unbranded? We'll have to wait and see.
So I downloaded the videotron firmware and it worked. Everything is back.
I'll try the unbranded version to see what it does.
Did you install the stock firmware using the stock recovery?
sorinmtl said:
So I downloaded the videotron firmware and it worked. Everything is back.
I'll try the unbranded version to see what it does.
Click to expand...
Click to collapse
Glad to hear it, keep us posted if you flash that unbranded firmware. Hoping it frees up some internal storage.
---------- Post added at 03:12 PM ---------- Previous post was at 03:11 PM ----------
speed4134 said:
Did you install the stock firmware using the stock recovery?
Click to expand...
Click to collapse
I believe he would have flashed the stock firmware using Odin for Windows. At least that's how it is normally done.
I just downloaded the videotron firmware from the website, I didn't flash the recovery. It's .md5 format, so I've flashed it with Odin. The phone was on CWM recovery, but it doesn't really matter as the firmware flashes the stock recovery too.
So I just flashed the videotron image in odin, phone rebooted and everything is fine, I'm back to stock, including no root and stock recovery. The only thing that's still there is the fact that phone is unlocked. (I've used the method described in the forum to unlock it).
As for the other firmware, it has _ESK in the name. I'm 99.9999% sure it's Eastlink firmware, another mobile carrier in Canada. The other ones had _VTR and so on in their name.
thanks for the info
Hotfile is down
I'm looking for a factory image of any of the MDJ builds.... Hotfile is down so I can't get it... does anybody have a copy that they would be willing to upload for me.... I need it so I can reset and sell this phone ASAP to get christmas money. Thanks

[Q] Cannot flash Stock Rom n5100

Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
aditzu_juice said:
Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
Click to expand...
Click to collapse
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
x102x96x said:
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
Click to expand...
Click to collapse
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
aditzu_juice said:
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
Click to expand...
Click to collapse
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
aditzu_juice said:
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
Click to expand...
Click to collapse
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
aditzu_juice said:
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
Click to expand...
Click to collapse
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
aditzu_juice said:
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
Click to expand...
Click to collapse
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
aditzu_juice said:
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
Click to expand...
Click to collapse
If you still need it, am happy to help if you give me your contact details
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Thank you. I you have the pit file then I could use it. Can you post it here, maybe if anybody else has this problem will find it in the thread.
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
.pit file for gt-n5100 needed
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
mrmrmrmr said:
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
Click to expand...
Click to collapse
Do you mind telling us how did you solved your problem?? Thanks
useer said:
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
Do you mind telling us how did you solved your problem?? Thanks
Click to expand...
Click to collapse
i am uploading pit file and partition output from heimdall, its from version 4.2.2
hi
this img how it works?

How to root T 807R4??

Hey, I'm trying to root my us cellular galaxy tab s 10.5 using Odin but after i flash and try to access the recovery it just brings me back to download mode and It says "Cannot boot in to normal Odin mode" in red..
Am I doing something something wrong? I used the correct TWRP file right? I used this one https://twrp.me/devices/samsunggalaxytabs105lte.html
Any help would be greatly appreciated!
PlagasX said:
Hey, I'm trying to root my us cellular galaxy tab s 10.5 using Odin but after i flash and try to access the recovery it just brings me back to download mode and It says "Cannot boot in to normal Odin mode" in red..
Am I doing something something wrong? I used the correct TWRP file right? I used this one https://twrp.me/devices/samsunggalaxytabs105lte.html
Any help would be greatly appreciated!
Click to expand...
Click to collapse
No, you need the T817P sprint version in development.
Ah, so there isn't currently a recovery for my particular model?
PlagasX said:
Ah, so there isn't currently a recovery for my particular model?
Click to expand...
Click to collapse
The sprint version is identical to your device.
So this rom would work with the US cellular version?
http://forum.xda-developers.com/galaxy-tab-s/development/rom-superskilled-basic-rom-v1-t3055473
So this rom would work with the US cellular version?
http://forum.xda-developers.com/gala...om-v1-t3055473
Click to expand...
Click to collapse
It looped on the samsung logo a few times so I just reflashed the sprint kk firmware in odin then used the snapdragon specific recovery and reflashed the rom...runs like a charmp now.
---------- Post added at 03:57 PM ---------- Previous post was at 03:53 PM ----------
Sorry it was the us cellular LP firmware I flashed in odin...the rom runs kk* sorry for the confusion
Can someone explain to me how to root t807r4 I have thia model please a simple and short explainat ion with link of softwares will be greatly appreciated
Can someone explain to me how to root t807r4 I have thia model please a simple and short explainat ion with link of softwares will be greatly appreciated
Click to expand...
Click to collapse
This is everything you need:
http://forum.xda-developers.com/galaxy-tab-s/development/root-cfautoroot-sm-t807t-sm-t807p-t3040465

Bootloader For SM-T800 (Samsung Galaxy Tab S 10.5)

So I was flashing IronRom for my tablet it asked if I want to include new bootloader I confirmed and it finished . its working but I noticed my download mode is in Chinese now(the page that asks to continue press volume up to exit press volume down) it doesn't cause problem yet but still it annoys me. (after I press volume up to enter download mode it switches back to english)
What I already did.
got stock firmware for android 6.0.1 from sammobile flashed it. checked still Chinese so not fixed
I used mkh.mourad tool to extract sboot.bin file and flashed that too. check download mode still in Chinese
any idea why this is happening? I though download mode is part of bootloader so flashing the new bootloader that is from Canada should have fixed this right?????!!!!!!!!!
Thanks
Sam
I'm having the exact same problem, were you able to fix it?
Craford said:
I'm having the exact same problem, were you able to fix it?
Click to expand...
Click to collapse
You probably need to flash param.bin
ashyx said:
You probably need to flash param.bin
Click to expand...
Click to collapse
I have the SM-T700 where can I get the param.bin file from? The bootloaders I have don't have the param.bin just the sboot.bin.
Thank You for your help!
Craford said:
I have the SM-T700 where can I get the param.bin file from? The bootloaders I have don't have the param.bin just the sboot.bin.
Thank You for your help!
Click to expand...
Click to collapse
Should be in the kitkat firmware.
Have not found it yet, still looking...
---------- Post added at 10:26 PM ---------- Previous post was at 09:47 PM ----------
Finally got it with this rom SM-T700_T700XXU1CPJ3... I flashed bootloader and now I have English in download mode.
Thank you so much for leading me in the right direction!!
SM-T700 TAB S Download mode language Chinese to English.
Posting the param.bin file for those who run into same problem...
Thanks ashyx for helping me!
Craford - I'd just like to say thanks for taking the time to post the param file. It's been puzzling me for ages why I had my recovery mode in a foreign language and didn't know how to fix it until now.
Craford said:
Posting the param.bin file for those who run into same problem...
Thanks ashyx for helping me!
Click to expand...
Click to collapse
I thought it was same param.bin file for T800, but unfortunately not.
Does someone as the same but for T800, please?

G925T Latest Stock 7.0 Nougat * RC1 firmware Odin flash (G925TUVS6FRC1_G925TTMB6FRC1)

Took 2 days to download but I have the stock Odin flash package (BL, AP, CP, CSC, BL) if anyone needs it, also just the stock RC1 as a ROM.
G925TUVS6FRC1_G925TTMB6FRC1
I'll upload it if anyone needs it
Also twrp-3.2.2-0-zeroltetmo.img.tar works and SuperSU-v2.82-201705271822.zip to root it, any questions just ask.
Hello, this update bricked a family member's phone and flashing the tar on AP mode appears successful but the phone is still stuck in download mode (normal boot produces black screen)
Can you upload the BL, AP, CP, CSC, BL files? Thank you!
---------- Post added at 02:29 AM ---------- Previous post was at 02:18 AM ----------
winmouser said:
Hello, this update bricked a family member's phone and flashing the tar on AP mode appears successful but the phone is still stuck in download mode (normal boot produces black screen)
Can you upload the BL, AP, CP, CSC, BL files? Thank you!
Click to expand...
Click to collapse
BTW the phone is the 32gb version, not sure if the CSC file will affect the partition size during reflash.
sirtweak0 said:
Took 2 days to download but I have the stock Odin flash package (BL, AP, CP, CSC, BL) if anyone needs it, also just the stock RC1 as a ROM.
G925TUVS6FRC1_G925TTMB6FRC1
I'll upload it if anyone needs it
Also twrp-3.2.2-0-zeroltetmo.img.tar works and SuperSU-v2.82-201705271822.zip to root it, any questions just ask.
Click to expand...
Click to collapse
yes i have a few questions...I was trying to fix FRP on a family members S6 Edge who had forgotten her login info and followed the wrong video. now i have a soft-bricked "error has occurred...use the emergency recovery function..." screen and I am very comfortable using Odin so I would rather fix the problem this way.
will your files restore my softbrick? i found another post that explains how to deal with the FRP issue, and talked about using a "combination firmware" but I have no idea what that means. i would believe that given all the files you have that a full restore should be possible, so if you think so I would very much appreciate you uploading them.
advTHANKSance!

Categories

Resources