Bootloader For SM-T800 (Samsung Galaxy Tab S 10.5) - Galaxy Tab S Q&A, Help & Troubleshooting

So I was flashing IronRom for my tablet it asked if I want to include new bootloader I confirmed and it finished . its working but I noticed my download mode is in Chinese now(the page that asks to continue press volume up to exit press volume down) it doesn't cause problem yet but still it annoys me. (after I press volume up to enter download mode it switches back to english)
What I already did.
got stock firmware for android 6.0.1 from sammobile flashed it. checked still Chinese so not fixed
I used mkh.mourad tool to extract sboot.bin file and flashed that too. check download mode still in Chinese
any idea why this is happening? I though download mode is part of bootloader so flashing the new bootloader that is from Canada should have fixed this right?????!!!!!!!!!
Thanks
Sam

I'm having the exact same problem, were you able to fix it?

Craford said:
I'm having the exact same problem, were you able to fix it?
Click to expand...
Click to collapse
You probably need to flash param.bin

ashyx said:
You probably need to flash param.bin
Click to expand...
Click to collapse
I have the SM-T700 where can I get the param.bin file from? The bootloaders I have don't have the param.bin just the sboot.bin.
Thank You for your help!

Craford said:
I have the SM-T700 where can I get the param.bin file from? The bootloaders I have don't have the param.bin just the sboot.bin.
Thank You for your help!
Click to expand...
Click to collapse
Should be in the kitkat firmware.

Have not found it yet, still looking...
---------- Post added at 10:26 PM ---------- Previous post was at 09:47 PM ----------
Finally got it with this rom SM-T700_T700XXU1CPJ3... I flashed bootloader and now I have English in download mode.
Thank you so much for leading me in the right direction!!

SM-T700 TAB S Download mode language Chinese to English.
Posting the param.bin file for those who run into same problem...
Thanks ashyx for helping me!

Craford - I'd just like to say thanks for taking the time to post the param file. It's been puzzling me for ages why I had my recovery mode in a foreign language and didn't know how to fix it until now.

Craford said:
Posting the param.bin file for those who run into same problem...
Thanks ashyx for helping me!
Click to expand...
Click to collapse
I thought it was same param.bin file for T800, but unfortunately not.
Does someone as the same but for T800, please?

Related

[Q] Cannot flash Stock Rom n5100

Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
aditzu_juice said:
Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
Click to expand...
Click to collapse
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
x102x96x said:
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
Click to expand...
Click to collapse
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
aditzu_juice said:
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
Click to expand...
Click to collapse
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
aditzu_juice said:
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
Click to expand...
Click to collapse
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
aditzu_juice said:
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
Click to expand...
Click to collapse
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
aditzu_juice said:
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
Click to expand...
Click to collapse
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
aditzu_juice said:
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
Click to expand...
Click to collapse
If you still need it, am happy to help if you give me your contact details
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Thank you. I you have the pit file then I could use it. Can you post it here, maybe if anybody else has this problem will find it in the thread.
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
.pit file for gt-n5100 needed
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
mrmrmrmr said:
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
Click to expand...
Click to collapse
Do you mind telling us how did you solved your problem?? Thanks
useer said:
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
Do you mind telling us how did you solved your problem?? Thanks
Click to expand...
Click to collapse
i am uploading pit file and partition output from heimdall, its from version 4.2.2
hi
this img how it works?

[Q] Need a pit file for s4 mini LTE I9195

Hi Everyone,
My phone is bricked : it is stucked in the white samsung LOGO. so I flashed it with its official firmware and still the same probleme
I read a lot of threads and came to this conclusion ... I need to flash it again but with the PIT file this time
My problem is that I don't know where to get it and if there is as many pit files as many firmware version so I need to be carefull wich one to pick.
Any Help is welcome !
hy,
try this link http://forum.xda-developers.com/showthread.php?t=2465460
on the post #6
b0g said:
hy,
try this link http://forum.xda-developers.com/showthread.php?t=2465460
on the post #6
Click to expand...
Click to collapse
Thanks for your reply ... you are telling me that the pit file that worked for the nexus 7 will work for my s4 mini?
b0g said:
hy,
try this link http://forum.xda-developers.com/showthread.php?t=2465460
on the post #6
Click to expand...
Click to collapse
Do I need to download all the archive ? ... you do not have only the PIT file ?
oualibadr said:
Do I need to download all the archive ? ... you do not have only the PIT file ?
Click to expand...
Click to collapse
the arhive is only for s4 mini (i9195),
for only pit file, check attachament
b0g said:
the arhive is only for s4 mini (i9195),
for only pit file, check attachament
Click to expand...
Click to collapse
Thkx BOG ... I just tried the thing and it didn't work : I flashed the sotck firmware supposed to be in my phone with the PIT file you gave and still stucked in the boot screen
Actually I'm not able to enter recovery mode, only download mode.
Any Idea?
oualibadr said:
Thkx BOG ... I just tried the thing and it didn't work : I flashed the sotck firmware supposed to be in my phone with the PIT file you gave and still stucked in the boot screen
Actually I'm not able to enter recovery mode, only download mode.
Any Idea?
Click to expand...
Click to collapse
Flash this file without pit and factory reset.
https://db.tt/1E0VaojE
And try to enter recorvery mode and do the factory reset. And then turn off the phone and flash your offical rom.
Küldve az én GT-I9195-ről Tapatalk 4 használatával
oualibadr said:
Thkx BOG ... I just tried the thing and it didn't work : I flashed the sotck firmware supposed to be in my phone with the PIT file you gave and still stucked in the boot screen
Actually I'm not able to enter recovery mode, only download mode.
Any Idea?
Click to expand...
Click to collapse
Did you resolve your issue???
I have the same issue, my phone stucked in the boot screen with the Samsung logo, but, before this, I have a message up on the left side of the screen: Set warranty bit: kernel
If anybody could help me, I will apreciate a lot!!:good:
marselcj said:
Did you resolve your issue???
I have the same issue, my phone stucked in the boot screen with the Samsung logo, but, before this, I have a message up on the left side of the screen: Set warranty bit: kernel
If anybody could help me, I will apreciate a lot!!:good:
Click to expand...
Click to collapse
Hi,
No it didn't work. I tried to flash a lot of boot files and firmwares ... And inthe last try my phone switched off in te middle of the process without wanting to switch on again: hard brick!!
Since your phone is still able to switch on and enter recovery mode ... I recommand to let the nearest samsung store deal whit it.
Good luck
Hi
Whit cmd on terminal emulator attached #1 we can create the pit file (not good for devices 32 GB). I made it. We have it on Sdcard.
It is out.pit inside out.zip.
The PitMagic is appl to extract the pit file on Windows Pc. Choice PIT file Analysis and open the file. Only to verify if the Pit is alright (this out.pit is) and have a listing if is good.
PIT_Analyses is the listing from the Pit File created on my S4 Mini I9195. The partition number is the "identifier".
I made this but never tried it. If you want try at Your risk, my out.pit created.
WOW
@radicspeter
I actually love you!! You saved my life, It worked straight away for my I9195 and super fast too
Thanks!
User radicspeter save my phone too. Thank You so much!
radicspeter said:
Flash this file without pit and factory reset.
https://db.tt/1E0VaojE
And try to enter recorvery mode and do the factory reset. And then turn off the phone and flash your offical rom.
Küldve az én GT-I9195-ről Tapatalk 4 használatával
Click to expand...
Click to collapse
Thank you so much ! You helped me recovering my phone
NaiNai said:
@radicspeter
I actually love you!! You saved my life, It worked straight away for my I9195 and super fast too
Click to expand...
Click to collapse
I'm happy see you too
mersonfufu said:
User radicspeter save my phone too. Thank You so much!
Click to expand...
Click to collapse
fish72 said:
Thank you so much ! You helped me recovering my phone
Click to expand...
Click to collapse
radicspeter said:
Flash this file without pit and factory reset.
https://db.tt/1E0VaojE
And try to enter recorvery mode and do the factory reset. And then turn off the phone and flash your offical rom.
Küldve az én GT-I9195-ről Tapatalk 4 használatával
Click to expand...
Click to collapse
Can use this on I9195 4.4.2
2010radams said:
Can i use your pit file if i have a I9195 that is on 4.4.2?
Click to expand...
Click to collapse
Of course!
Hi, it is possible to create a pit file to have more space in interial memory? In my second phone Galaxy s2 (16Gb) I "put" pit file with 6GB. And from this time I do not have any problem to install everything i wont. For s4 mini LTE 8GB it is possible?
Hi,
I noticet it was possible through this thread to obtain a pit file for the S4 mini to restore factory settings.
I need a pit file too but modified using the combination of internal storage+SD card.
I created a thread for this:
http://forum.xda-developers.com/gal...5-pit-file-t3199645/post62789202#post62789202
I was told to use pit magic but I do.not know how to use it well.and hot to.combine both media.
Can someone please help me out reaching my goal?
Unfortunately, till I do not get this pit file (proper and reliable) I vlcannot installed/upgrade to Lollipop.
Thank you
Hi!
I'm having the same problem of the first post with my GT-I9195, could someone help me? i've tried a lot of firmwares and nothing helped me, could someone help me?
I created a thread to this: http://forum.xda-developers.com/gal...s-s4-mini-gt-i9195-loop-t3224190#post63283046
Phone is bricked , Samsung S4 mini gt-i9195 LTE (for no reason , its not rooted , and have the official rome) , when connect in pc did not recognised olny as QHSUSB_device , after some search i see the trick with microSD to enter in download mode and know iam stock heare ...
In first try , i download the official rom for my phone (and region) but whet i try to sent it from odin i get error on partision , after that i search and find that i need pit file to re partition , i try diferend filles but nothing work .
Now i get this on odin
odin errror : <ID:0/005> There is no PIT partition.
and on phone screen
SECURE CHECK FAIL : PIT
ODIN: flash read failure
SO i need pit file now....

SGH-i317 stuck on galaxy note II screen after OTA

Hi I have this problem that OTA download new update and than it was installing when it reboot it never come back it is now stuck on galaxy note II screen. things i did is tring to install stock rom( KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5) and it complete pass but when it reboot same thing it is stuck on screen. i tried to clean cache but it doesn't boot in to recovery. now i am stock i need help. just want to is it partion got damaged. does anybody have complete package rom( means PIT file, PDA file, CSC file, Phone file, bootloader file) i tried looking for file i found links of hotfile but hotfile is no more i also found couple of dropbox links which is not active no more can some one help me on this.
Thank you
ash0621 said:
Hi I have this problem that OTA download new update and than it was installing when it reboot it never come back it is now stuck on galaxy note II screen. things i did is tring to install stock rom( KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5) and it complete pass but when it reboot same thing it is stuck on screen. i tried to clean cache but it doesn't boot in to recovery. now i am stock i need help. just want to is it partion got damaged. does anybody have complete package rom( means PIT file, PDA file, CSC file, Phone file, bootloader file) i tried looking for file i found links of hotfile but hotfile is no more i also found couple of dropbox links which is not active no more can some one help me on this.
Thank you
Click to expand...
Click to collapse
Go to this thread.
http://forum.xda-developers.com/showthread.php?t=2502464
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
ODIN under Section 8 hers
http://forum.xda-developers.com/showthread.php?t=1987541
dicksteele said:
Go to this thread.
http://forum.xda-developers.com/showthread.php?t=2502464
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
ODIN under Section 8 hers
http://forum.xda-developers.com/showthread.php?t=1987541
Click to expand...
Click to collapse
Thanks for reply
I tried 4.3 param.bin it works phone come back to live
now its is on 4.1.2
baseband i317ucama4
kernal :3.0.31-578342
build: JZ054K.I317UCAMA4
NOW WHEN CLICK ON SOFTWARE UPDATE IT SAYS NO fIRMWARE
SI HOW CAN I UPDATE TO 4.3
THANKS
ash0621 said:
Thanks for reply
I tried 4.3 param.bin it works phone come back to live
now its is on 4.1.2
baseband i317ucama4
kernal :3.0.31-578342
build: JZ054K.I317UCAMA4
NOW WHEN CLICK ON SOFTWARE UPDATE IT SAYS NO fIRMWARE
SI HOW CAN I UPDATE TO 4.3
THANKS
Click to expand...
Click to collapse
Sweet.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
EDIT: Assuming you are ATT user
I ran into the same problem. However, after flashing 4.3param_tz it puts me back to 4.1.1. How do I upgrade to 4.1.2? If I try doing an OTA to 4.1.2, the phone reboots after downloading, installs and then hangs again at the Samsung Galaxy Note II screen.
ash0621 said:
Thanks for reply
I tried 4.3 param.bin it works phone come back to live
now its is on 4.1.2
baseband i317ucama4
kernal :3.0.31-578342
build: JZ054K.I317UCAMA4
NOW WHEN CLICK ON SOFTWARE UPDATE IT SAYS NO fIRMWARE
SI HOW CAN I UPDATE TO 4.3
THANKS
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2589891
-》Sent from my mind to your screen.
THANK YOU!
dicksteele said:
Go to this thread.
http://forum.xda-developers.com/showthread.php?t=2502464
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
ODIN under Section 8 hers
http://forum.xda-developers.com/showthread.php?t=1987541
Click to expand...
Click to collapse
I was worried that my phone was going to be a paperweight. My phone wasn't able to get past the Galaxy Note II logo. All that I was able to do was go into download mode and flash anything but i couldn't go into recovery mode. After flashing 4.3 param .tz.tar my phone was finally able to boot up. Thanks so much.
acowsaysmoo said:
I was worried that my phone was going to be a paperweight. My phone wasn't able to get past the Galaxy Note II logo. All that I was able to do was go into download mode and flash anything but i couldn't go into recovery mode. After flashing 4.3 param .tz.tar my phone was finally able to boot up. Thanks so much.
Click to expand...
Click to collapse
Sweet. It's hard as hell to kill these phones. Luckily someone tried that trick. I was in the same boat last month when I was testing.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Hi, i bought a note 2 and it was stuck in galaxy note II Logo i did that and now it is stuck in samsung logo, the guy that i bought it said that it was running OTA 4.3 and they root it and tried to downgrade it. i put twrp recovery and when i tried to do a factory reset it said failed.
tito07dr said:
Hi, i bought a note 2 and it was stuck in galaxy note II Logo i did that and now it is stuck in samsung logo, the guy that i bought it said that it was running OTA 4.3 and they root it and tried to downgrade it. i put twrp recovery and when i tried to do a factory reset it said failed.
Click to expand...
Click to collapse
Just start from scratch
http://forum.xda-developers.com/showthread.php?t=2618447
Then when you get to Post #3 steps, you can just flash a stock rooted 4.3 Rom instead of doing the 4.3 OTA again.
[QRCODE][/QRCODE]
dicksteele said:
Just start from scratch
http://forum.xda-developers.com/showthread.php?t=2618447
Then when you get to Post #3 steps, you can just flash a stock rooted 4.3 Rom instead of doing the 4.3 OTA again.
Click to expand...
Click to collapse
i flashed TWRP 2.6.3.1 , then installed i317-cwm-ucubmk6-rooted-odex.zip via twrp, it boot up but now it is stucked in att logo.
PD: when i tried to factory reset twrp said failed, only can clean cache :S.
---------- Post added at 05:15 PM ---------- Previous post was at 04:53 PM ----------
tito07dr said:
[QRCODE][/QRCODE]
i flashed TWRP 2.6.3.1 , then installed i317-cwm-ucubmk6-rooted-odex.zip via twrp, it boot up but now it is stucked in att logo.
PD: when i tried to factory reset twrp said failed, only can clean cache :S.
Click to expand...
Click to collapse
i solved it, just wipe data, them did factory resest and now it power up!!
Thx a lot bro!
Hi, i have another problem i dont know if it is a software or hardware issue, all the sensors are like off, light, proximity, gyro, all!,
pic attached
tito07dr said:
Hi, i have another problem i dont know if it is a software or hardware issue, all the sensors are like off, light, proximity, gyro, all!,
pic attached
Click to expand...
Click to collapse
hey any1 can help me with this problem? i tested the board with other light/proximity sensor and it didnt work.
im running i317-cwm-ucubmk6-rooted-odex.zip with
thanks!
tito07dr said:
hey any1 can help me with this problem? i tested the board with other light/proximity sensor and it didnt work.
im running i317-cwm-ucubmk6-rooted-odex.zip with
thanks!
Click to expand...
Click to collapse
What app are you using. I'm running the same ROM
dicksteele said:
What app are you using. I'm running the same ROM
Click to expand...
Click to collapse
nothing, I just flashed it.
tito07dr said:
I'm oem, nothing, I just flashed it.
Click to expand...
Click to collapse
What application are you using to test the sensors, or what is the screenshot of
dicksteele said:
What application are you using to test the sensors, or what is the screenshot of
Click to expand...
Click to collapse
*#0*#, the samsung test mode
Hi All. I've been working on this Note 2 for the past 48 hours (maybe 5-6 hours each day), but still cannot figured out what's wrong with it. I have downloaded the stock Rogers rom 4.4.2 and it flashed perfectly fine and when it reboot, then stuck at Samsung screen. I've tried method like removed battery then wipe data/factory reset, then wipe cache partition but to no avail.
The stock rom I used is I317MVLUDNF3_I317MOYADNF3_I317MVLUDNF3_HOME.tar, not sure if this is correct.
I also get these error message:
E:failed to mount /efs (invalid argument)
Anyone can help me out. I would greatly appreciate.
Thanks
You need the ne5 version the nf3 is for the n7105
Do you know where I can download it?
terpin32 said:
You need the ne5 version the nf3 is for the n7105
Click to expand...
Click to collapse

Bootloop

Trying to revert back to stock official firmware on the N5110. I am using Odin and the correct firmware file found on SamMobile, N5110XXDNE1. I am only getting to samsung logo and then it's stuck. won't boot.
i am having thev same problem!
any help will be greatly appreciated!
andreadrubin said:
any help will be greatly appreciated!
Click to expand...
Click to collapse
What is your region, if it's US, I can help you with Bootloader and CSC files, if only flash the AP file your tablet might not able to boot.
Normally , I will load these 3 files in Odin and it rarely fails to boot.
BL_N5110UEU2CNE2_1498778_REV01_user_low_ship.tar.md5
AP_N5110UEU2CNE2_1498778_REV01_user_low_ship.tar.md5
CSC_XAR_N5110XAR2CNE2_1498778_REV01_user_low_ship.tar.md5
---------- Post added at 05:10 AM ---------- Previous post was at 04:51 AM ----------
ulriks9 said:
Trying to revert back to stock official firmware on the N5110. I am using Odin and the correct firmware file found on SamMobile, N5110XXDNE1. I am only getting to samsung logo and then it's stuck. won't boot.
Click to expand...
Click to collapse
Try again with the BootLoader (BL ) and AP file, don't use the CSC as it for US region
http://www.mediafire.com/download/bkek225c33c5sw2/GT-N5110.rar

Pit file for SM-T525 needed. Fail (size) in Odin. Need to repartition.

SOLVED
Hi!
I'm new here. I managed to flash a twrp recovery that didn't play well with my tablet. I tried to flash the stock ROM with Odin, but the operation failed do to fail (size), which I have read is due to need to repartition. DO any of you know how to get hold of the PIT-file for SM-T525? It is not easy to find on the internet.
Any help would be deeply appreciated!
/paunchygent
SOLVED
Found pit file! Now its just not booting properly.
Hi again. Found a working pit file after much ado. Managed to flash the stock rom with the partition table with a couple of % left on the battery. It is still not booting properly, but at least firmware and recovery is back in working order and the boot loop is gone.
If you download a multiple Firmware from Sammy, the PIT file is included in the CSC image.
So you can extracted from there.
bierma32 said:
If you download a multiparty Firmware from Sammy, the PipIT file is included in the CSC image.
So you can extracted from there.
Click to expand...
Click to collapse
Can you please explain this a bit more in detail? Want to flash Stock-FW via ODIN, but get fail because of size of hidden.img.ext4.
From what I read until now - guess I need to flash it with a PIT. But where to get the PID file ?
What do you mean with multiparty FW. I just know source sammobile, where I can download different versions ....
---------- Post added at 02:00 PM ---------- Previous post was at 01:51 PM ----------
paunchygent said:
Hi again. Found a working pit file after much ado. Managed to flash the stock rom with the partition table with a couple of % left on the battery. It is still not booting properly, but at least firmware and recovery is back in working order and the boot loop is gone.
Click to expand...
Click to collapse
Where did you get it from? I need this too.
@starbright_
Here are the link for the Download tool. Fast download from Sammy Servers.
If you check binary nature, you will download a multiple FW with Modem, CSC , Phone and Bootloader file.
Now unzip the CSC .image and you have got the PIT file for this Rom and your Tab.
@starbright_
I forget to add the link : https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Had this tool already, but the hint "binary" was important.
Nevertheless - it still doesn't work. It tried this Odin methods (see below), both fail. No idea what is the problem !?!?
After booting into download I get this message at screen: Is this normal?
Current binary Custom
Current status: Custom
Knox: 0
Warranty: 1
Qualcom Secure Boot: enable
AP SWREV: S1 T1 R1 A1 P1
Write Protection: Enable
UDC Start
starbright_ said:
this Odin methods (see below)
Click to expand...
Click to collapse
I'd try the second method (4 files) again, but:
- No pit is necessary (it's in the CSC and Odin will apply it automatically).
- Uncheck "repartition" and "f. reset time" before flashing.
bbsc said:
I'd try the second method (4 files) again, but:
- No pit is necessary (it's in the CSC and Odin will apply it automatically).
- Uncheck "repartition" and "f. reset time" before flashing.
Click to expand...
Click to collapse
I can't believe - it passes.
What the f... !! I can't see why this works and others not. Anyhow - thank you so much.
starbright_ said:
I can't believe - it passes.
What the f... !! I can't see why this works and others not. Anyhow - thank you so much.
Click to expand...
Click to collapse
I think you was trying to apply a wrong pit.
That "50M_HIDDEN" in the filename stands for something, I guess
bbsc said:
I think you was trying to apply a wrong pit.
That "50M_HIDDEN" in the filename stands for something, I guess
Click to expand...
Click to collapse
Mh, but this is the Pit I could grab out of the binary download. So it has been a part of the image.
starbright_ said:
this is the Pit I could grab out of the binary download
Click to expand...
Click to collapse
Out of that very "binary download" you was trying to flash?
Strange...
It looks like you was trying to flash "EUR" image and the separate pit-file was from "DBT" (German) image.
Isn't that right?

Categories

Resources