I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
canussie said:
I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
Click to expand...
Click to collapse
KERNEL IS NOT SEANDROID ENFORCING ---> its not error and not important just a message that you use Custome Kernel or Recovery.
Go to Recovery and do Wiping (Cache,Data,All) and reboot it should boot.
if not download latest ROM (PD3 or PD2) and flash using ODin
mahdi72 said:
KERNEL IS NOT SEANDROID ENFORCING ---> its not error and not important just a message that you use Custome Kernel or Recovery.
Go to Recovery and do Wiping (Cache,Data,All) and reboot it should boot.
if not download latest ROM (PD3 or PD2) and flash using ODin
Click to expand...
Click to collapse
I tried recovery, that didn't work. I have not tried PD3 or PD2 ROM, I will try that and see how it goes.
canussie said:
I tried recovery, that didn't work. I have not tried PD3 or PD2 ROM, I will try that and see how it goes.
Click to expand...
Click to collapse
OK, I have found a few different ROMs, what would the filename of the PD2 or PD3 ROM be for the SM-G920p?
canussie said:
OK, I have found a few different ROMs, what would the filename of the PD2 or PD3 ROM be for the SM-G920p?
Click to expand...
Click to collapse
PD3 or PD2 is BuildNumber.PD2 released and after flashing that you can take PD3 from OTA Update. PD2 is based on Android 6.0.1
http://samsung-updates.com/details/65838//SM-G920P/SPR/G920PVPS3CPD2.html
Saafir said:
You can download both PD2 or PD3 from this thread so you don't have throttled download. Are you using Sprint for service, since you say its an unlocked device?
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
No, I am not using sprint . I am using Telstra in Australia.
Saafir said:
You can download both PD2 or PD3 from this thread so you don't have throttled download. Are you using Sprint for service, since you say its an unlocked device?
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
And also.. thank you for your help .
canussie said:
And also.. thank you for your help .
Click to expand...
Click to collapse
I flashed PD2, it goes further than it did before... instead of stopping at the Samsung Galaxy S6 logo, it now goes straight to the android recovery screen. Attached is the screenshot. I am downloading PD3 and will try that next.
canussie said:
I flashed PD2, it goes further than it did before... instead of stopping at the Samsung Galaxy S6 logo, it now goes straight to the android recovery screen. Attached is the screenshot. I am downloading PD3 and will try that next.
Click to expand...
Click to collapse
Update. Looks like I get the same results with PD3.
Saafir said:
Can you look on the back of your device, on the bottom and confirm it is SM-G920P please
Click to expand...
Click to collapse
Sure is .
SM-G920P.
Saafir said:
You will have to search for a guide to get this device back working on your carrier. I'm not very familiar with using unlocked devices on other carriers. I myself would take it back to the place of purchase. Perhaps someone else will jump in with better knowledge. @koop1955
Click to expand...
Click to collapse
Thanks for the advice, I bought it in Canada, I am now in Australia and not going back to Canada anytime soon.
canussie said:
And also.. thank you for your help .
Click to expand...
Click to collapse
I have never experienced this (only occurs on phones outside the US) and can't offer you a direct solution, but this person seems to have solved the same problem on the Edge model using a toolkit:
https://www.youtube.com/watch?v=HlMQQPpqELI
Hope this helps you.
U must have tried to install a custom recovery or a kernel try to drain s6 battery to 0% to do that go into odin mode let it sit and turn off automatically. .when off plug in charger..charge to about 5% first go into recovery wipe data n cache restart ur phone ...simple restarting the phone wont help ya..if this doesnt help u try installing 5.11 BOL1 stock rom...n then drain it 0% repeat the procedure
Sent from my LG-H815 using XDA-Developers mobile app
canussie said:
I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
Click to expand...
Click to collapse
DRK no longer
---------- Post added at 09:50 PM ---------- Previous post was at 09:47 PM ----------
I bet everything you lost imei and DRK baneband and more
Hieu vn said:
DRK no longer
---------- Post added at 09:50 PM ---------- Previous post was at 09:47 PM ----------
I bet everything you lost imei and DRK baneband and more
Click to expand...
Click to collapse
Agreed
anderd said:
Agreed
Click to expand...
Click to collapse
Ok, any tips on how to restore this?
canussie said:
Ok, any tips on how to restore this?
Click to expand...
Click to collapse
Im sure there's a solution that doesn't require a box, but im not aware of it at the moment, If the IMEI/MEID is gone, you'll have to find someone who can repair that, and most claim their repairs only fix the GSM side (IMEI) and doesn't write a new clean sprint MEID to the device. In the end, it may end up being easier to replace the device and sell the current one for parts. If you only need GSM service, then im sure someone, either on here, or another forum, or a auction site, could help you for a fee. Thats all i can suggest at the moment.
mahdi72 said:
PD3 or PD2 is BuildNumber.PD2 released and after flashing that you can take PD3 from OTA Update. PD2 is based on Android 6.0.1
http://samsung-updates.com/details/65838//SM-G920P/SPR/G920PVPS3CPD2.html
Click to expand...
Click to collapse
PD2 Workedfor me thanks...
try flashing new kernel
Related
I updated my phone to kitkat using the OTA update while rooted, which was definitely a stupid thing to do, but now my phone seems to be stuck on the ATT splash screen after booting. It's been this way for 15+ minutes. Any way to reset it/unbrick it?
I am able to get into recovery mode and download mode.
Try a factory reset in recovery?
pre4speed said:
Try a factory reset in recovery?
Click to expand...
Click to collapse
I tried this and nothing changed. Would a flash back to 4.3 stock fix the problem?
cfsharp said:
I tried this and nothing changed. Would a flash back to 4.3 stock fix the problem?
Click to expand...
Click to collapse
I would read about doing that before doing so. From what I've been reading if you're on a certain bootloader, you can't go backwards. I'm by no means an expert, so just read a lot so you're comfortable with doing that. Good luck .
Dont flash old firmware, but older roms are ok to try. I'd start by trying to flash enewmans stock kk rom.
I managed to get the phone back to 4.3 Stock however now I don't have mobile data. I'm thinking this is a modem issue? Anyone have a fix?
I believe dochliday77 has a post somewhere with the kk modem ripped from the rom
crazymonkey05 said:
I believe dochliday77 has a post somewhere with the kk modem ripped from the rom
Click to expand...
Click to collapse
I installed a 4.3 modem and it did not fix the issue. In phone status IMEI is Unknown.
You need to install the 4.4 modem on a 4.3 rom
crazymonkey05 said:
You need to install the 4.4 modem on a 4.3 rom
Click to expand...
Click to collapse
Thanks! I coincidentally figured this out right before checking this post. For anyone having the same issue, check this thread here. It seemed to fix my issues with mobile data, wifi, and pretty much everything else.
cfsharp said:
Thanks! I coincidentally figured this out right before checking this post. For anyone having the same issue, check this thread here. It seemed to fix my issues with mobile data, wifi, and pretty much everything else.
Click to expand...
Click to collapse
Did you get your imei back?
crazymonkey05 said:
Did you get your imei back?
Click to expand...
Click to collapse
Yes, I did.
That's good to hear
Help please
What did yu do to get it past the AT&T logo? I am also stuck there
cfsharp said:
Yes, I did.
Click to expand...
Click to collapse
Hey im also stuck on the at&t logo. I was rooted but used triangle away to remove the counter and unrooted via super su/user <--- I don't really know the name of it. So i did the ota update and the phone restarted, it installed the update and restarted again and now will not get passed the att logo, even let it stay on over night. How did you get back to 4.3?? I'm a serious n00b so I need detailed instructions, anyone please?!?
ajcrunk said:
Hey im also stuck on the at&t logo. I was rooted but used triangle away to remove the counter and unrooted via super su/user <--- I don't really know the name of it. So i did the ota update and the phone restarted, it installed the update and restarted again and now will not get passed the att logo, even let it stay on over night. How did you get back to 4.3?? I'm a serious n00b so I need detailed instructions, anyone please?!?
Click to expand...
Click to collapse
Everything in download mode needs to say "official" in order to get the OTA. See if this helps:
http://forum.xda-developers.com/galaxy-s3-att/general/how-to-restore-device-status-to-t2832880
If the ota appeared to flash, and its hanging during boot, factory reset should solve it.
Be aware that doing so with stock recovery installed will wipe the internal sd card.
Step one download full 5.1.1. Firmware from here LATEST OH6
https://www.androidfilehost.com/?fid=24052804347812539 thanks to @stangdriver44
Step 2 use odin 3.10. or smartswitch and flash full firmware if you need the link to latest odin let me know and I will post it
Step 3 Let phone boot up.... Turn off phone and go into download mode again, You do this by pressing
VOLUME DOWN, POWER, HOME BUTTON at the same time......... from here you go and flash this file thru odin one more time let it boot up, It might restart a couple of times since is rooting and you will have ROOT on 5.1.1
https://mega.co.nz/#!gwYkyDoT!T8KMjBvb5nXqmzlW6Jd0y-Yey0vx_DHUWOjxsWWgxz4 thanks @g.lewarne for this
Step 4- Which will be your Last step, This will be to get a custom recovery twrp on your device, You will need this if you want to flash any other roms, or files, If you want just root this step is not necessary........ So here we go same steps turn phone off and boot into download mode, and odin flash this file
And we got working TWRP v.2.8.7.1 thanks to @Aou
CONGRATULATIONS YOU ARE NOW ROOTED.............. ONLY CONTINUE IF YOU WANT TO FLASH TWRP A CUSTOM RECOVERY YOU MOST HAVE A 925T TMOBILE EDGE
Aou said:
Deleted & re-uploaded v9. It's working now, and just tested it: https://mega.co.nz/#!QBsXxLpb!QBP9zNinaHGaavn__EOn6vEyyehnutyFQ9ELwcfhEFU
The complete thread for twrp http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Click to expand...
Click to collapse
Flash this thru ODIN
I recommend to wipe your phone and start fresh for smoother performance but that is all up to you guys
gdmlaz said:
Step one download full 5.1.1. Firmware from here
http://forum.xda-developers.com/newthread.php?do=newthread&f=4196
Step 2 use odin 3.10. and flash full firmware if you need the link to latest odin let me know and I will post it
Step 3 Let phone boot up.... Turn off phone and go into download mode again, You do this by pressing
VOLUME DOWN, POWER, HOME BUTTON at the same time......... from here you go and flash this file thru odin one more time let it boot up, It might restart a couple of times since is rooting and you will have ROOT on 5.1.1
https://www.androidfilehost.com/?fid=24052804347764978 thanks @mikeyinid for this
Last step let twrp working same step turn phone up, boot into download mode, and odin flash this file
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570 thanks to @bigbiff for this
I recommend to wipe your phone and start fresh for smoother performance but that is all up to you guys
Click to expand...
Click to collapse
Actually credit for the rooted kernel goes to @g.lewarne, but thank you!
mikeyinid said:
Actually credit for the rooted kernel goes to @g.lewarne, but thank you!
Click to expand...
Click to collapse
will update thanks
gdmlaz said:
I'm getting stuck on a blackscreen for twrp so wait for this till i figure it out
Click to expand...
Click to collapse
So, go ahead and root but don't flash TWRP yet?
mzimmer88 said:
So, go ahead and root but don't flash TWRP yet?
Click to expand...
Click to collapse
Yea root works perfect..... Twrp I believe is for th 920 which gets us stuck in a black screen........ will have to wait for a working twrp for the edge
gdmlaz said:
Yea root works perfect..... Twrp I believe is for th 920 which gets us stuck in a black screen........ will have to wait for a working twrp for the edge
Click to expand...
Click to collapse
Okay, do you know if a factory reset will cause me to lose root? My battery is awful after the 5.1.1 OTA...
mzimmer88 said:
Okay, do you know if a factory reset will cause me to lose root? My battery is awful after the 5.1.1 OTA...
Click to expand...
Click to collapse
I believe it will...... You could just factory reset and then odin flash the 2nd file and you will have root back no big deal
https://www.androidfilehost.com/?fid=24052804347764978
ok problem I did steps above and root is good, but when I tried recovery im in black screen how to get out?? HELP
edit: never mind I found my way out
edit 2: I guess if I had read 100 % of above I would've seen that we still waiting on working twrp
1) Will this trip knox?
2) Will this work for the non-edge S6?
ipaq_101 said:
will this trip knox?
Click to expand...
Click to collapse
yes
lrmdaddy said:
ok problem I did steps above and root is good, but when I tried recovery im in black screen how to get out?? HELP
edit: never mind I found my way out
Click to expand...
Click to collapse
Yea do not flash TWRP I edited the first post..... Only way I found out how to get out of the black screen is reflashing the full firmware on top..... Or you could flash stock 5.1.1 recovery if you have it available
gdmlaz said:
Yea do not flash TWRP I edited the first post..... Only way I found out how to get out of the black screen is reflashing the full firmware on top..... Or you could flash stock 5.1.1 recovery if you have it available
Click to expand...
Click to collapse
all I did to get out of the dark of put phone into dl mode then out of dl mode and now is all good in s6 edge land...so if I under stand, we have root for s6 edge just no recovery?? im going to try twrp v2 just to see what happens
lrmdaddy said:
all I did to get out of the dark of put phone into dl mode then out of dl mode and now is all good in s6 edge land...so if I under stand, we have root for s6 edge just no recovery?? im going to try twrp v2 just to see what happens
Click to expand...
Click to collapse
yea exactly just root no recovery..... That will get you into another black-screen recoveries have to be matched to your android version...... if you can't get out of the black screen like before flash full firmware it won't wipe
gdmlaz said:
yea exactly just root no recovery..... That will get you into another black-screen recoveries have to be matched to your android version...... if you can't get out of the black screen like before flash full firmware it won't wipe
Click to expand...
Click to collapse
flashing firm ware now our v2 didn't work, I had try
I keep getting a security notice notification on top it's very annoying anybody know how to get rid of it
Do I need to download the 5.1.1 file if I am already on the official tmobile firmware of 5.1.1
rfgarza8 said:
Do I need to download the 5.1.1 file if I am already on the official tmobile firmware of 5.1.1
Click to expand...
Click to collapse
If you are not having problems with your OTA update you could just flash the 2nd file and you will have root..... Sometimes you have to flash it more than once...... If you are getting poor battery life I would suggest doing a factory reset and starting fresh
winco209 said:
I keep getting a security notice notification on top it's very annoying anybody know how to get rid of it
Click to expand...
Click to collapse
Same here trying to figure out how to make it stop
Using titanium uninstall smartswitch and securitylogagent and you won't get the notifications
If you want to keep smartswitch install this one that is modded after
http://forum.xda-developers.com/showpost.php?p=60155030&postcount=2905
gdmlaz said:
Same here trying to figure out how to make it stop
Using titanium uninstall smartswitch and securitylogagent and you won't get the notifications
Click to expand...
Click to collapse
Uninstall security log then it's fixed
I get this error: Custom Binary (Boot) Blocked by FAP Lock.
Anyone else getting this? How do I circumvent?
Hello,
Here is an UPDATE this is a FULL S6e+ Canadian Variant Rom
First of All at this point you know that your phone should be rooted + you need a moded kernel or you will be stuck in a boot-loop ( you will find it in S6e+ international Thread )and this means BYE-BYE WARRANTY
Second do not forget to Backup in TWRP / CWM
The most important is: I'M not responsible if your phone went crazy
Now that you agreed for the 3 Warnings:
Download the ROM in your SD
Reboot in your TWRP / CWM recovery
Flash it
Wipe Cache, Wipe Dalvik/ART Cache
Reboot wait and wait maybe one more time wait (android will finish doing his Job) et Voilà.
What is in this ROM
A FULL ROM WITH ALL THE CSC CANADIAN
Volume is boosted
Native Call Recorder is Enabled
2nd Keyboard Symbol Enabled ( for eng_US and fr_CA )
Rooted
Xposed
Deodexed
As from my Side everything is working well . BUT STILL SO IMPORTANT DO A BACKUP AS WE DON'T HAVE YET A STOCK FIRMWARE.
When you Flash it you will have Rogers CSC . if you want another Canadian Carrier CSC,
once you phone is booted go to the dialer and type *#272*IMEI# its gonna prompt the Canadian CSC select the needed one click on install, the Phone will reboot Reset and install the selected CSC.
I know all the T-Mobile bloatware will be removed but I would like to keep one of them which is the "NAME ID" how could I do that?
negbalakay said:
I know all the T-Mobile bloatware will be removed but I would like to keep one of them which is the "NAME ID" how could I do that?
Click to expand...
Click to collapse
just push it in system/ app/ create folder nameid / and set the permission
With the proper Kernel, would this ROM work for the standard T-Mobile S6 edge? Also does this ROM retain the T-Mobile WiFie Calling?
GodfatherSadri said:
With the proper Kernel, would this ROM work for the standard T-Mobile S6 edge? Also does this ROM retain the T-Mobile WiFie Calling?
Click to expand...
Click to collapse
This is not a Full Rom so u cant flash it as so.
CA variant does not have Wifi call enabled <till now>
Kernels wld work usually b/een Tmobile and Canadian ( i was even surprised when I flashed a full Note5 T-mobile ROM on my s6 edge + just to test how the phone wld act)
When will we US variants get in on the action eh?
Sent from my SM-G928T using Tapatalk
---------- Post added at 05:49 AM ---------- Previous post was at 05:49 AM ----------
[/COLOR]
Shredder96 said:
When will we US variants get in on the action eh?
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Try going to s6edge plus general section. We have action there.
Sent from my SM-G928T using Tapatalk
Shredder96 said:
When will we US variants get in on the action eh?
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I dont know. . I did this rom cause we canadian do not have yet a stock firmware.
Can we install TMobile 928T ROM in our 928W8? I really want the Wifi calling feature. What's really the difference between these two models?
Sent from my SM-G928W8 using XDA Free mobile app
Yorgo1982 said:
This is not a Full Rom so u cant flash it as so.
CA variant does not have Wifi call enabled <till now>
Kernels wld work usually b/een Tmobile and Canadian ( i was even surprised when I flashed a full Note5 T-mobile ROM on my s6 edge + just to test how the phone wld act)
Click to expand...
Click to collapse
Do you know where we can download the Canadian version of stock firmware? My phone has turned out to be a brick because of the FRP lock (so stupid that forgot OEM unlock before factory reset the device), seems like I will have to use the stock firmware to make it work again... Or do you have any other suggestions? Only few information about 928W8, so hard to find one on the same boat...
sunyangkobe said:
Do you know where we can download the Canadian version of stock firmware? My phone has turned out to be a brick because of the FRP lock (so stupid that forgot OEM unlock before factory reset the device), seems like I will have to use the stock firmware to make it work again... Or do you have any other suggestions? Only few information about 928W8, so hard to find one on the same boat...
Click to expand...
Click to collapse
I will try to make an odin with a tmobile rom. Will test it and give u news. but let me understand 1rst are you able to boot in recovery mode again ? if yes a stock recovery?
sunyangkobe said:
Do you know where we can download the Canadian version of stock firmware? My phone has turned out to be a brick because of the FRP lock (so stupid that forgot OEM unlock before factory reset the device), seems like I will have to use the stock firmware to make it work again... Or do you have any other suggestions? Only few information about 928W8, so hard to find one on the same boat...
Click to expand...
Click to collapse
You can find it most likely at http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841 :good:
mmyers0876 said:
You can find it most likely at http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841 :good:
Click to expand...
Click to collapse
\
thanks but your link is for the G925W8 and not the G928W8 and in canada we dont have a stock rom yet
Yorgo1982 said:
I will try to make an odin with a tmobile rom. Will test it and give u news. but let me understand 1rst are you able to boot in recovery mode again ? if yes a stock recovery?
Click to expand...
Click to collapse
Thanks for the reply. I am in the situation exactly like here: http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054
Tried to flash TWRP using ODIN, but got the same error "custom binary blocked by FRP lock". Only download mode is available, in other words, only ODIN can help now.
Lots of discussions in the above link, but seems that the only working solution is to flash the stock firmware, which doesn't exist for 928W8 in Canada....
sunyangkobe said:
Thanks for the reply. I am in the situation exactly like here: http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054
Tried to flash TWRP using ODIN, but got the same error "custom binary blocked by FRP lock". Only download mode is available, in other words, only ODIN can help now.
Lots of discussions in the above link, but seems that the only working solution is to flash the stock firmware, which doesn't exist for 928W8 in Canada....
Click to expand...
Click to collapse
Are u rooted?
I created an odin and flashed it and it worked. With a moded boot. Twrp and a system.img sm-g928f as soon as u r in u can flash my cust rom with twrp to go back to g928w8. But it will trip ur knox.
Yorgo1982 said:
Are u rooted?
I created an odin and flashed it and it worked. With a moded boot. Twrp and a system.img sm-g928f as soon as u r in u can flash my cust rom with twrp to go back to g928w8. But it will trip ur knox.
Click to expand...
Click to collapse
Yes, it is rooted. But the FRP lock stops me odin flashing the tmobile stock firmware, which I guess is still different from 928w8's stock firmware.... Odin always shows failed.....
sunyangkobe said:
Yes, it is rooted. But the FRP lock stops me odin flashing the tmobile stock firmware, which I guess is still different from 928w8's stock firmware.... Odin always shows failed.....
Click to expand...
Click to collapse
Stock tmobile wont work.
And even moded system tmobile fails . I will send u the odin that i did. It will need 6min to finish uploading
Yorgo1982 said:
Stock tmobile wont work.
And even moded system tmobile fails . I will send u the odin that i did. It will need 6min to finish uploading
Click to expand...
Click to collapse
Sure, thanks a lot! I will wait for it and hope you can save my phone....
sunyangkobe said:
Sure, thanks a lot! I will wait for it and hope you can save my phone....
Click to expand...
Click to collapse
Voila https://www.dropbox.com/s/pntnqaxi0an79k1/CREATED-TAR-201509210757.tar?dl=0
Again this is based on international system. With TWRP note 5
Yorgo1982 said:
Voila https://www.dropbox.com/s/pntnqaxi0an79k1/CREATED-TAR-201509210757.tar?dl=0
Again this is based on international system. With TWRP note 5
Click to expand...
Click to collapse
Awesome, really appreciated! I will download and try this one and will let u know if it fixes my problem.
---------- Post added at 03:48 AM ---------- Previous post was at 03:13 AM ----------
Yorgo1982 said:
Voila https://www.dropbox.com/s/pntnqaxi0an79k1/CREATED-TAR-201509210757.tar?dl=0
Again this is based on international system. With TWRP note 5
Click to expand...
Click to collapse
hmm... still with no luck...
Same error..... When I tried to odin the new ROM, the error shows up again "Custom Binary(Boot) Blocked By FRP Lock"....
I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmware i had was 4.4.2
Silvershot said:
I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmwar i had was 4.4.2
Click to expand...
Click to collapse
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.
S3miniFin said:
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.
Click to expand...
Click to collapse
I used ODIN for past phones to flash custom kernels and it worked fine. i said i flashed someone that isnt supposed to be supported. i have no idea. i am not an expert and i thought someone can provide with a fast fix since there will surely be someone to have experienced this issue.
anyone else?
bump! please help.. i dont have another phone and I need to get this fixed asap!
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1
Silvershot said:
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1
Click to expand...
Click to collapse
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...
S3miniFin said:
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...
Click to expand...
Click to collapse
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.
S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.
Your phone has official 4.4.2 Rom and you are currently using it. If you have Wi-Fi issues, your can try to flash custom kernel (Silviu, alexax)
Sent from my GT-I9190 using Tapatalk
Silvershot said:
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.
Click to expand...
Click to collapse
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Silvershot said:
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.
Click to expand...
Click to collapse
For Wifi problem could help if boot phone again after first setup.
ok now it wont go past the flashing SAMSUNG logo. i went and bought a huawei g play mini today. no more time trying to revive the s4 mini.
if someone wants to give it a try let me know and i'll ship it to you.
I will try it!
Plz sent me a PN (i'm german)
Sent from my GT-I9195 using XDA Free mobile app
S3miniFin said:
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
For Wifi problem could help if boot phone again after first setup.
Click to expand...
Click to collapse
i tried rebooting the phone but it still is as slow as before. it peaks on 27mbit when i start the speedtest but then drops down to 19 or sth..
actually the download speed seems to be the problem. not the upload. now i forgot the network and connected again and its even slower
I have been checking the wifes phone every morning for the last month. Looks like the Marshmallow update is about 1.3 gigs. I have no idea if it will be bug free, but I imagine it will be stable. Now, for those reading this, that are confused and on a stock ROM, go to settings, about device, and then software update.
It's working great so far..
Sent from my SM-G928T using XDA-Developers mobile app
There is some kind of update today can't get it till I get off of works says I need to use wifi.
richierich118 said:
There is some kind of update today can't get it till I get off of works says I need to use wifi.
Click to expand...
Click to collapse
It's marshmallow
Sent from my SM-G928T using XDA-Developers mobile app
Yes, both our S6 edge plus and the Note 5 received Marshmallow today from T-Mobile!!
I don't think I will take the update until I know we can still root and a custom recovery.
re: rooting Marshmallow 6.1
7STANG said:
I don't think I will take the update until I know we can still root and a custom recovery.
Click to expand...
Click to collapse
No need to bother with kernels it's not needed to ROOT MM 6.0!!!
1: odin flash twrp-3.0.2-0-zeroltetmo.img.tar, flash this after doing
the OTA Tmobile update of the mm 6.0 .
2: then in twrp recovery flash this supersu-v2.71-systemmode.zip.
If you do do it right, you will have no rooting issues.
Good luck,
Have a great day!
Misterjunky said:
No need to bother with kernels it's not needed to ROOT MM 6.0!!!
1: odin flash twrp-3.0.2-0-zeroltetmo.img.tar, flash this after doing
the OTA Tmobile update of the mm 6.0 .
2: then in twrp recovery flash this supersu-v2.71-systemmode.zip.
If you do do it right, you will have no rooting issues.
Good luck,
Have a great day!
Click to expand...
Click to collapse
How do I update toMM 6.0 I have custom recovery and custom kernel
Sent from my SM-G928T using XDA-Developers mobile app
AT&Tsucks said:
How do I update toMM 6.0 I have custom recovery and custom kernel
Sent from my SM-G928T using XDA-Developers mobile app
Click to expand...
Click to collapse
Misterjunky said:
No need to bother with kernels it's not needed to ROOT MM 6.0!!!
1: odin flash twrp-3.0.2-0-zeroltetmo.img.tar, flash this after doing
the OTA Tmobile update of the mm 6.0 .
2: then in twrp recovery flash this supersu-v2.71-systemmode.zip.
If you do do it right, you will have no rooting issues.
Good luck,
Have a great day!
Click to expand...
Click to collapse
Thanks MrJ, that is what I was hoping. I just wanted to be sure they didnt lock us out. I had that happen with AT&T with one of their updates!
AT&Tsucks said:
How do I update toMM 6.0 I have custom recovery and custom kernel
Sent from my SM-G928T using XDA-Developers mobile app
Click to expand...
Click to collapse
You are going to need to Odin the T-mobile stock firmware, which you can find on MinisterJunky's post here:
http://forum.xda-developers.com/tmo...rmware-g928t-complete-untouched-boh6-t3198387
After that, you just need to run software update from the settings and you should be good to go. I would highly recommend doing a factory reset after you ODIN the stock 5.1 firmware before updating to 6.01.
Need help...I odined back to 5.1.1 and factory reset after....Then updated MM of phone...Then made Sure OEM unlocked, rebooted into download and odin flashed TWRP 3.0.2 and it say PASS and when i reboot into recovery it reboots into stock recovery!!! I have tried a few times in odin and does the same thing, i reboot into stock recovery everytime
---------- Post added at 02:52 PM ---------- Previous post was at 02:47 PM ---------- @Misterjunky
Need help...I odined back to 5.1.1 and factory reset after....Then updated MM of phone...Then made Sure OEM unlocked, rebooted into download and odin flashed TWRP 3.0.2 and it say PASS and when i reboot into recovery it reboots into stock recovery!!! I have tried a few times in odin and does the same thing, i reboot into stock recovery everytime
Where did you get the twrp 3.0.2 from I've been looking for it you think you can share the link
Sent from my SM-G928T using Tapatalk
Misterjunky said:
No need to bother with kernels it's not needed to ROOT MM 6.0!!!
1: odin flash twrp-3.0.2-0-zeroltetmo.img.tar, flash this after doing
the OTA Tmobile update of the mm 6.0 .
2: then in twrp recovery flash this supersu-v2.71-systemmode.zip.
If you do do it right, you will have no rooting issues.
Good luck,
Have a great day!
Click to expand...
Click to collapse
So for some reason I am having the same problem trying to get this rooted.
I have made sure the OEM unock is enabled in develper settings
I boot into download mode, and I uncheck reset in options
I ODIN flash twrp-3.0.2-0-zeroltetmo.img.tar
I power off the phone, then I try to boot into recovery, the phone will show recovery is not enforcing (or whatever it says in red), then the screen just turns black.
Then I will reboot the phone again and it will remove the custom recovery.
Any suggestions will be much appreciated.
finally we got him.marshmallow update on s6 edge+ t mobile.now for customs rom?
SM-G928T Software Update Error
Hello!
Software update doesn't want to be installed on my SM-G928T device ( There is an error: "Failed to update software .... The downloaded file is invalid"
I tried to download and install it 3 times... But.. the same result) I have 19GB free space on my device and no any custom...
Help pls)
Luc098 said:
Hello!
Software update doesn't want to be installed on my SM-G928T device ( There is an error: "Failed to update software .... The downloaded file is invalid"
I tried to download and install it 3 times... But.. the same result) I have 19GB free space on my device and no any custom...
Help pls)
Click to expand...
Click to collapse
Try using a different internet connection!
spirithandler said:
Try using a different internet connection!
Click to expand...
Click to collapse
100% complete and after that the error appears... Tried 3 different internet connection)
Probably, it is better to wait for stock firmware and do it through the Odin. Ehh..
To anyone having probs. rooting the new DPD1 Marshmallow update, follow the guide HERE. Looks like dirtybudha has compiled everything in one post. Hit the thanks buttons!!!!!! It works perfect for both devices.